Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-frequency acoustics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Continuous surface-to-distributed acoustic sensor snapshots explain reactivation of individual natural fractures during an unconventional reservoir stimulation

ABSTRACT Fiber-optic sensing technologies allow petroleum engineering teams to detect hydraulic fracture interaction with boreholes during unconventional reservoir stimulation. In combination with high-repeatability seismic sources, the same distributed acoustic sensors (DASs) enable vertical seismic profiling (VSP) of the fracture evolution away from the boreholes. We discovered clear signatures of seismic scattering on activated fractures during nine days of continuous seismic monitoring of the fracturing stages at the Austin Chalk/Eagle Ford Field Laboratory. The present study applies a novel approach for quantitative analysis of the scattering events in terms of the evolution of the geometry and elastic stiffness of individual fractures. Our characterization strategy sequentially refines the fracture models: from a stack of 1D soft layers to 3D rectangular inclusions. First, we estimate the number of fracture locations and reflectivity using a modified sparse-spike deconvolution of the stacked VSP traces. The fracture set consists of five fractures spaced by 15–30 m with a reflectivity of approximately 1%. Then, we develop a scattering integral method to refine these estimates along with an inversion of the fracture top and bottom for each monitoring vintage. We find that, initially, some of the fractures are located above the monitoring fiber with the height of approximately 100 m. Then we integrate the seismic interpretation with the low-frequency DAS and pressure and microseismic monitoring to reconstruct the activation process of the fractures. Most likely, some of the natural fractures slowly grew downward to the monitoring fiber as a result of fluid injections in the stimulated well. This led to bright strain anomalies but did not trigger seismicity. The top of the fractures remained almost constant and were limited by a lithologic boundary/stress barrier. To our knowledge, this is the first time VSP data enabled tracking of the fracture evolution with such high spatial and temporal resolution, which was previously only available for crosswell surveys and at a much smaller scale.

Glubokovskikh, Stanislav↗
DOE OSTI2025

Room‐Temperature Mid‐Infrared Detection Using Metasurface‐Absorber‐Integrated Phononic Crystal Oscillator

Mid-infrared (MIR) detectors find extensive applications in chemical sensing, spectroscopy, communications, biomedical diagnosis, and space exploration. Alternative to semiconductor MIR photodiodes and bolometers, mechanical-resonator-based MIR detectors show advantages in higher sensitivity and lower noise at room temperature, especially toward longer wavelength infrared. Here, uncooled room-temperature MIR detectors based on lithium niobate surface acoustic wave phononic crystal (PnC) resonators integrated with wavelength-and-polarization-selective metasurface absorber arrays are demonstrated. The detection is based on the resonant frequency shift induced by the local temperature change due to MIR absorptions. The PnC resonator is configured in an oscillating mode, enabling active readout and low-frequency noise. The 1-GHz oscillator-based MIR detector shows a relative frequency deviation of 5.24 × 10 −10 Hz −1/2 at an integration time of 50 µs, leading to an incident noise equivalent power of 197 pW Hz −1/2 when input 6-µm MIR light is modulated at 1.8 kHz, and a large dynamic range of 10 7 in incident MIR power. The device architecture is compatible with the scalable manufacturing process and can be readily extended to a broader spectral range by tailoring the absorbing wavelengths of metasurface absorbers.

Xi, Zichen [Virginia Polytechnic Inst. and State U↗
DOE OSTI2025

Crystalline Order Yet Glass-Like Heat Transport Driven by Hidden Local Distortions as the Structural Origin of Ultralow Thermal Conductivity in AgErTe 2

Given their rich chemical diversity and the interplay among the p-, d-, and f-orbitals of chalcogens, transition metals, and lanthanides, respectively, rare-earth transition-metal chalcogenides exhibit a wide variety of structural, magnetic, and transport phenomena. As a result, they form a particularly appealing platform for investigating structure–property relationships, emergent electronic and magnetic behaviors, and thermal transport. Here we investigate AgErTe 2 as a model system to understand phonon-glass behavior in ordered crystalline solids, which establishes the design principles for thermal barrier coatings and next-generation thermoelectrics. The local bonding asymmetry and lattice softness suppress the inherently low lattice thermal conductivity, resembling the characteristics of amorphous materials. This suppression is significantly influenced by local off-centering of Ag atoms, which breaks lattice periodicity while maintaining global crystallinity. The presence of antibonding states just below the Fermi level, arising from Ag 4d and Te 5p orbital interactions, leads to lattice softening and destabilizes ideal tetrahedral coordination, resulting in a pseudo Jahn–Teller distortion. Furthermore, the coexistence of weaker, more polarizable Ag–Te bonds and stronger Er–Te bonds creates a complex vibrational landscape enriched with low-frequency modes and enhanced phonon scattering. A pronounced disparity in interatomic force constants gives rise to highly localized, low-energy optical phonons linked to Ag rattling. These flat vibrational modes exhibit strong coupling with transverse acoustic phonons, resulting in ultrashort phonon lifetimes and mean free paths approaching interatomic distances. These features collectively enhance phonon scattering across a broad range of length and energy scales. This work offers a framework for engineering suppressed thermal conductivity in crystalline systems without the introduction of alloying elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Species-specific acoustic responses by bats to ultrasonic stimuli used for reducing bat-wind turbine interactions

An unintended consequence of wind energy generation is bat fatalities caused by wind turbine blade strikes. One potential approach to reduce collision risk is to use ultrasound to create an uncomfortable or disorienting airspace around wind turbine blades. Ultrasonic deterrents (UDs) have produced mixed results in experimental field studies at commercial wind energy facilities, with effectiveness varying by species and location. It is possible that some species can alter their normal echolocation characteristics to counter the signal of UDs. Our broad objective was to maximize the effectiveness of a UD by comparing changes in echolocation characteristics during three UD frequency emissions among species, between seasons, and between sex. We hypothesized that UD emissions with frequencies most similar to each species’ echolocation characteristics would be more likely to alter the bats’ echolocation, and bat responses would vary between seasons and sex for each species. We released wild-captured bats into a 60 m × 10 m × 4.4 m (length × width × height) flight cage located in San Marcos, Texas, USA, from July to October 2020 and March to May 2021 and monitored echolocation frequencies with ultrasonic microphones. We conducted trials on Brazilian free-tailed bats ( Tadarida brasiliensis ; n = 54), cave myotis ( Myotis velifer ; n = 44), red bats ( Lasiurus blossevilli , Lasiurus borealis ; n = 41), evening bats ( Nycticeius humeralis ; n = 32), and tricolored bats ( Perimyotis subflavus ; n = 8). We found that species with high-frequency echolocation calls altered their echolocation signatures more commonly during high-frequency UD emissions, whereas low-frequency bats altered their echolocation signatures more commonly during low-frequency UD emissions. Additionally, echolocation responses varied between seasons and sexes for several species. Variations in responses may be dependent on species migratory status, differences in mating behavior and mating season, hormonal differences between sexes and seasons, and/or constraints on echolocation adaptability. Our results offer insights into the variable effectiveness of UDs at reducing bat fatalities at wind turbines and provide information for potential adjustments to UDs for improved success.

17 WIND ENERGY↗
NASA NTRS1972

Radiation resistance of a rectangular panel.

The radiation resistance corresponding to the natural modes of a finite rectangular panel is theoretically determined from the total energy radiated to the farfield. The panel is assumed to be simply supported in an infinite baffle. Asymptotic solutions for the low-frequency region are derived, and curves covering the entire frequency range for various mode shapes and aspect ratios are obtained through numerical integration. When the ratio of the acoustic wavenumber to the panel wavenumber is a constant much less than unity, the radiation resistance for all modes is a minimum if the intranodal area (the area between adjacent node lines) is square, and increases with the aspect ratio of the intranodal area.

Wallace, C. E.↗
NASA NTRS1973

Full-scale experiments with an ejector to reduce jet engine exhaust noise

Experiments with a modified J65 turbojet engine and ejector resulted in noise power reductions as large as 13 decibels in the low-frequency range. High-frequency noise power, which appeared to originate mainly from the mixing processes within the ejector, increased. Peak velocities at the ejector exit were reduced by one-half to two-thirds, although survey rakes showed that mixing was not complete. Acoustical lining inside the ejector would reduce the perceived noise level (in PNdB) by removing much of the high-frequency noise.

Clark, B. J.↗
NASA NTRS1973

Propagation of plane waves in flow through a variable area duct

Duct geometry is an important factor that influences the transmission of sound in a duct. Nonconstant area produces variations in steady flow quantities through the duct, which can cause reflections of acoustic disturbances and the creation of standing wave patterns, and which can attenuate and disperse propagating waves. To study the problem, a second-order-accurate numerical method has been developed. The method of characteristics is used to solve the acoustic equations with the assumption of quasi-one-dimensional flow in the duct. Numerical results are presented over a broad range of frequencies. Low-frequency results are compared with approximate solutions for compact nozzles and high-frequency calculations are compared with results from the short-wave theory. The numerical results are also compared with an analytical solution of the acoustic equations for exponential horn sections with zero mean flow to further establish the validity of the numerical method.

King, L. S.↗
NASA NTRS1975

Acoustic characteristics of a large upper-surface blown configuration with turbofan engines

This paper presents acoustic results from static and simulated low forward velocity tests of a large-scale model of an aircraft configuration with two turbofan engines in the full-scale tunnel at the Langley Research Center. The turbofan engines were integrated into the model and equipped with rectangular nozzles to provide the upper-surface blowing. Results indicate that the upper-surface-blowing noise problem can be characterized, primarily, by the unsymmetrical radiation pattern due mainly to shielding of the high-frequency engine noise and the production of low-frequency noise by jet-surface interaction. The directivity of the low-frequency noise was found to depend on the trailing-edge flap angle when the thrust levels were low. Normalized sound pressure level spectral density data showed good agreement at low Strouhal number with other small- and large-scale model data from tests using simulated wing-flap systems. Forward speed effects were undetectable at the low tunnel speeds used during the tests.

Preisser, J. S.↗
NASA NTRS1976

Correlation of internal surface turbulence with far-field noise of the augmentor wing propulsive-lift concept

A wind tunnel investigation was conducted to determine the nature, strength, and variation with airspeed of the acoustic sources of the augmentor wing propulsive-lift concept. The augmentor wing overall noise is dominated by the high frequency jet mixing noise characteristic of the lobed primary nozzle. The augmentor modifies the intensity and propagation characteristics of the jet sources, especially those that exist inside the augmentor. The interaction of the turbulent flow with the augmentor creates low-frequency, low-intensity surface noise and trailing edge noise. These sources dominate any jet mixing noise that is present at the low frequencies and could become significant if the jet noise was suppressed by treating the augmentor with a lining tuned to the jet noise source location. The far-field noise of the untreated augmentor is unaffected by airspeed; however, this may not be the case when the jet noise is suppressed, because the trailing edge surface pressure and correlations with far-field noise do show a reduction with forward speed.

Falarski, M. D.↗
NASA NTRS1976

Low-frequency noise reduction of lightweight airframe structures

The results of an experimental study to determine the noise attenuation characteristics of aircraft type fuselage structural panels were presented. Of particular interest was noise attenuation at low frequencies, below the fundamental resonances of the panels. All panels were flightweight structures for transport type aircraft in the 34,050 to 45,400 kg (75,000 to 100,000 pounds) gross weight range. Test data include the results of vibration and acoustic transmission loss tests on seven types of isotropic and orthotropically stiffened, flat and curved panels. The results show that stiffness controlled acoustically integrated structures can provide very high noise reductions at low frequencies without significantly affecting their high frequency noise reduction capabilities.

Getline, G. L.↗
NASA NTRS1979

Possible generation mechanisms of low-frequency waves /less than about 50 Hz/ with application to the bow shock plasma

Generation mechanisms of waves observed at the earth's bow shock or in its vicinity within the frequency range extending up to about 50 Hz are reviewed. Observations and theories regarding waves in the solar wind upstream of the bow shock (both low-frequency 0.01-0.05 Hz and high-frequency 0.5-4 Hz waves), waves in the bow shock itself and magnetosheath waves arising from processes of generation or amplification in the bow shock are considered. Hydromagnetic, ion-acoustic and whistler type waves are discussed.

Dangelo, N.↗
NASA NTRS1981

The kilometric radio emission spectrum - Relationship to auroral acceleration processes

Using current theories for the generation of auroral kilometric radiation, the possibilities for obtaining information on the auroral acceleration processes from the spectrum of this radiation are discussed. It is shown, for example, that under certain conditions the low-frequency cutoff provides a direct indication of the upper altitude limit of the acceleration region. What is more, certain discrete features in the kilometric radiation spectrum show a very close similarity to whistler-mode emissions, thereby suggesting that the basic instability mechanisms are quite similar. Certain of these discrete features have frequency drifts which can be interpreted in terms of the propagation of shock-like disturbances along the auroral field lines at velocities near the ion-acoustic speed.

Gurnett, D. A.↗
NASA NTRS1982

Stimulation of plasma waves by electron guns on the ISEE-1 satellite

The results of the ISEE-1 satellite experiment relating to observations of the waves stimulated during electron injections, when the spacecraft is passing through the magnetosphere, the magnetosheath, and the solar wind, are discussed. It is shown that the injection of an electron beam current of the order of 10 to 60 microamperes with energies ranging from 0 to 40 eV produces enhancements in the electric wave spectrum. An attempt has been made to identify the low-frequency electrostatic wave observed below the ion plasma frequency as an ion acoustic mode, although the excitation mechanism is not clear. A coupling mechanism between the electron plasma mode and streaming electrons with energies higher than the thermal speed of the cold electron population has been proposed to explain the observations above the electron plasma frequency.

Lebreton, J.-P.↗
NASA NTRS1985

High time resolution plasma wave and magnetic field observations of the Jovian bow shock

High time resolution (60 ms) Voyager magnetometer and plasma wave measurements of a strong (fast Mach number 16), quasi-perpendicular Jovian bow shock reveal an abrupt change in the plasma wave spectrum at the leading edge of the shock foot. Upstream electron plasma waves terminate at the leading edge, and are replaced by a lower-frequency broadband spectrum of ion-acoustic-like waves, which terminates at the main shock ramp. The clear association with the foot region of the lower frequency component suggests that it is generated by reflected ions. If the upstream plasma waves are generated by an escaping electron heat flux, their termination at the leading edge suggests that electrons are heated by the low-frequency waves in the shock foot.

Moses, S. L.↗
NASA NTRS1989

Low-frequency electrostatic instabilities excited by injections of an electron beam in space

One-dimensional particle simulations have been carried out to study the low-frequency broadband electrostatic noise that propagates almost perpendicularly from the magnetic field line when a nonrelativistic electron beam is injected into space from a spacecraft. For T(e) = T(i) the electrostatic ion cyclotron waves appear as well as the waves near the lower hybrid frequency. When the magnetic field is reduced so that Omega(e) is much less than omega(pe) in a nonisothermal plasma, T(e) greater than T(i) oblique ion acoustic instabilities appear to propagate almost perpendicular to the magnetic field. In addition, a very low frequency mode at omega much less than Omega(i) is found to be generated by the electrons flowing into the conductor. Both the injected beam electrons as well as the ambient electrons flowing into the spacecraft are responsible for generating those instabilities, which accelerate ions perpendicular to the magnetic field.

Hwang, Y. S.↗
NASA NTRS1990

Evaluation of discrete frequency sound in closed-test-section wind tunnels

The principal objective of this study is to assess the adequacy of linear acoustic theory with an impedance wall boundary condition for modeling the detailed sound field of an acoustic source in a duct. This study compares measurements and calculations of a simple acoustic source in a rectangular concrete duct lined with foam on the walls and anechoic end terminations. Measuring acoustic pressure for 12 wave numbers provides variation in frequency and absorption characteristics of the duct walls. The cases in this study contain low frequencies and low wall absorptions corresponding to measurements of low-frequency helicopter noise in a lined wind tunnel. This regime is particularly difficult to measure in wind tunnels due to high levels of the reverberant field relatively close to the source. Close to the source, where the interference of wall reflections is minimal, correlation is very good. Away from the source, correlation degrades, especially for the lower frequencies. Sensitivity studies show little effect on the predicted results for changes in impedance boundary condition values, source location, measurement location, temperature, and source model for variations spanning the expected measurement error.

Mosher, Marianne↗
NASA NTRS1992

Detection and characterization of fatigue cracks in thin metal plates by low frequency resonant model analysis

Low-frequency resonant model analysis, a technique for the detection and characterization of fatigue cracks in thin metal plates, which could be adapted to rapid scan or large area testing, is considered. Experimental data displaying a direct correlation between fatigue crack geometry and resonance frequency for the second vibrational plate mode are presented. FEM is used to calculate the mechanical behavior of the plates, and provides a comparison basis for the experimentally determined resonance frequency values. The waveform of the acoustic emission generated at the resonant frequency is examined; it provides the basis for a model of the interaction of fatigue crack faces during plate vibration.

Wincheski, B.↗
NASA NTRS1993

Dynamics of the solar chromosphere. I - Long-period network oscillations

We analyze differences in solar oscillations between the chromospheric network and internetwork regions from a 1 hr sequence of spectrograms of a quiet region near disk center. The spectrograms contain Ca II H, Ca I 422.7 nm, and various Fe I blends in the Ca II H wing. They permit vertical tracing of oscillations throughout the photosphere and into the low chromosphere. We find that the rms amplitude of Ca II H line center Doppler fluctuations is about 1.5 km/s for both network and internetwork, but that the character of the oscillations differs markedly in these two regions. Within internetwork areas the chromospheric velocity power spectrum is dominated by oscillations with frequencies at and above the acoustic cutoff frequency. They are well correlated with the oscillations in the underlying photosphere, but they are much reduced in the network. In contrast, the network Ca II H line center velocity and intensity power spectra are dominated by low-frequency oscillations with periods of 5-20 min. Their signature is much clearer in our Ca II H line center measurements than in previously used diagnostics which are contaminated by signals from deeper layers. We find that these long-period oscillations are not correlated with underlying photospheric disturbances, and we discuss their nature.

Lites, B. W.↗