Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-gravity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Flight IV technical report for experiment 74-37 contained polycrystalline solidification in low-G

Experiments were performed to study the effect of a low-gravity environment on the columnar-to-equiaxed transition (CET) during polycrystalline solidification. Solutions of H2O-30 wt% NH4Cl and H2O-37 wt% NH4Cl were solidified in semicylindrical molds with radial heat extraction. Both solutions were quenched from the same soak temperature (90 C); the respective superheat temperatures were, therefore, approximately 57 and 23 C. The lower superheat resulted in a completely columnar structure, and the higher superheat resulted in a 1/3 columnar - 2/3 equiaxed microstructure; these results were independent of the relationship between heat flow direction and gravity. Grain multiplication mechanisms observed were showering, thermal inversion driven convection cells, and compositionally induced density inversion driven convection cells.

Papazian, J. M.↗
NASA NTRS1978

The effects of curvature and viscosity on baroclinic instability: A two-layer model

A linear stability analysis of a baroclinic zonal current contained between two parallel rigid boundaries is presented. Curvature is included by performing the analysis on a beta b-plane and viscosity by allowing for the effects of Ekman layers on the rigid boundaries. A two-layer model is used. This calculation was carried out to assist in the design of a spherical model of the general circulation of the earth's atmosphere for Spacelab. In the low-gravity environment on an orbiting vehicle, a dominant radial dielectric body force, analogous to planetary gravity, can be achieved over a volume of liquid held between two concentric spheres. The results show the Eady short wavelength cutoff, and long wavelength cutoffs due to Ekman damping and curvature.

Fowlis, W. W.↗
NASA NTRS1978

Chemical reactions in low-g

The Apollo-Soyuz flight experiment, 'Chemical Foams' demonstrated that foams and air/liquid dispersions are much more stable in low-gravity than on the ground. It thus should be possible to conduct unique chemical reactions in space foams. The low-g results and subsequent ground work on the formaldehyde clock reaction indicate that the reaction is strongly influenced by (1) dissociated and undissociated solution species being adsorbed at solid/liquid and gas/liquid surfaces and (2) chemical reaction rates apparently being affected by long-range forces determined by the liquid mass and the extent and nature of all surface interfaces.

Grodzka, P. G.↗
NASA NTRS1980

Separating liquid and gaseous solutions

Clusius-Dickel separation (CDS) technique, currently used in laboratoryscale separation of certain isotopes, may find more effective applications in low-gravity, space environments. Many advantages in power supply, mechanical stresses, and spatial arragement can be realized in space, making technique suitable for biological and polymer separations.

Benefield, J. W.↗
NASA NTRS1979

Laser Doppler Velocimetry Workshop

The potential of laser Doppler velocimetry as a technique for use in mapping flows in the several fluid systems under development for doing research on low-gravity processes, is investigated. Laser Doppler velocimetry techniques, equipment, and applications are summarized.

Owen, R. B.↗
NASA NTRS1979

Summaries of early materials processing in space experiments

Objectives, methods, and results of low-gravity materials processing experiments are summarized, and a bibliography of published results for each experiment is provided. Included are drop tower experiments, the Apollo demonstration experiments, the skylab experiments and demonstration experiments, and the Apollo-Soyuz experiments and demonstrations. The findings of these experiments in the fields of crystal growth, metallurgy, and fluid behavior are summarized.

Naumann, R. J.↗
NASA NTRS1979

Gravitational influences on the liquid-state homogenization and solidification of aluminum antimonide

Typical commercial or laboratory-prepared samples of polycrystalline AlSb contain microstructural inhomogeneities of Al- or Sb-rich phases in addition to the primary AlSb grains. The paper reports on gravitational influences, such as density-driven convection or sedimentation, that cause microscopic phase separation and nonequilibrium conditions to exist in earth-based melts of AlSb. A triple-cavity electric furnace is used to homogenize the multiphase AlSb samples in space and on earth. A comparative characterization of identically processed low- and one-gravity samples of commercial AlSb reveals major improvements in the homogeneity of the low-gravity homogenized material.

Ang, C.-Y.↗
NASA NTRS1979

Applications Spacelab missions

The paper presents the plans of the Office of Space and Terrestrial Applications for the Shuttle/Spacelab missions. It is reported that the current program contains dedicated low-gravity mission (Spacelab 3 mission) and several minor missions planned for flight during 1980-1982. It is noted that these missions have either Materials Processing or Earth viewing emphasis. Finally, several representative experiments are used to illustrate the Applications Spacelab Program, such as the Materials Experiment Assembly (MEA), and the Atmospheric Trace Molecule Measured by Spectroscopy (ATMOS) experiment.

Pellerin, C. J., Jr.↗
NASA NTRS1980

SPAR and ASTP studies of plane-front solidification and magnetic properties of Bi/MnBi

Eutectic and off-eutectic Bi/MnBi compositions have been directionally solidified parallel, anti-parallel and perpendicular to the gravity vector in a one-g environment and in low-gravity during the ASTP flight. MnBi rod diameter and interparticle spacing distributions are similar for all gravity vector orientations when grown at high solidification rates in one-g. Previously reported ASTP results are explained by the existence of a metastable magnetic phase and off-eutectic solidification models.

Pirich, R. G.↗
NASA NTRS1979

Marangoni bubble motion in zero gravity

It is shown experimentally that the Marangoni phenomenon is a primary mechanism for the movement of a gas bubble in a nonisothermal liquid in a low-gravity environment. In such two-phase flow systems, local variations in bubble surface tension are caused by a temperature gradient in the liquid. Shearing stresses thus generated at the bubble surface lead to convection in both media, as a result of which the bubble begins to move. A mathematical model consisting of the Navier-Stokes equations and the thermal energy equations, along with the appropriate boundary conditions for both media, is proposed.

Thompson, R. L.↗
NASA NTRS1979

Radiometry of asteroids

Measurements of the thermal emission of asteroids can be used to derive albedos and diameters and to infer information on thermophysical properties of the upper layer of asteroid surfaces. Radiometric diameters and albedos, derived on the basis of standard thermal models for low-conductivity regoliths, have been determined for approximately 200 asteroids, with results in agreement with determinations by polarimetry and stellar occultations. For objects to which these standard models apply, diameters can be determined with an accuracy of plus or minus 10%. In several cases of small asteroids, however, there is evidence that the standard models do not apply, presumably due to the absence of an insulating regolith. Thus the interpretation of radiometric diameters is in question and the utility for objects with diameters less than about 30 km is diminished. In these cases the thermal observations potentially can provide information on the ability of low-gravity objects to retain regoliths.

Morrison, D.↗
NASA NTRS1980

Ultraviolet colors of W Ursae Majoris - Gravity darkening, temperature differences, and the cause of W-type light curves

The paper presents photometry of the prototype W UMa binary system in three ultraviolet bands with the ANS satellite. It was found that W UMa has low-gravity darkening beta of 0.03; that temperature differences between the components not established by gravity darkening are insignificant; and that the bolometric albedo is not very large. It was also found that W UMa is limb-darkened in the ultraviolet region, and that the inner hemisphere of the less massive component is hotter than that predicted by gravity darkening and the reflection effect. It was concluded that about 20% of the surface area of the component responsible for large gravity darkening is covered by dark spots distributed uniformly in the longitudinal direction. An observational value of the convective darkening exponent of 0.054 plus or minus 0.02 is proposed.

Eaton, J. A.↗
NASA NTRS1981

Measurement of forces due to liquid motion in a propellant tank

This paper presents the results of a study to develop an analytical model capable of predicting the forces acting on a tank caused by large-amplitude propellant motion. This effort contributed to an analysis of the influence of propellant dynamics on separation of the External Tank from the space shuttle orbiter. This paper is concerned with an experimental investigation that aided in development and verification of the analytical model. A scaling approach was developed that allowed the liquid motion to be simulated in subscale tanks. Liquid reorientation forces were measured using two test systems. One operated in the low-gravity environment produced in a drop tower and the second operated aboard the KC-135 'zero-g' test aircraft. The manner of liquid motion, influence of various factors, and the measured forces are discussed.

Tegart, J. R.↗
NASA NTRS1981

Containerless undercooling and solidification in drop tubes

A containerless low-gravity environment, produced within a 32 m drop tube apparatus, has been used to undercool and solidify metals, alloys or glasses by eliminating crucible induced nucleation processes. Niobium droplets with diameters in the range of 2 to 5 mm have been undercooled by 525 K which corresponds to the maximum undercooling reported by Turnbull and others on fine dispersions of low melting point metals. Solidification at large undercooling resulted in single crystalline spheres with the formation of interdendritic shrinkage channels on the sample surface rather than interior shrinkage cavities. The grain refinement as observed for Ni samples undercooled and solidified in fused silica crucibles does not occur in free-falling drops of Nb. A calculated solidification speed of undercooled Nb is compared to Ni. A solidification speed of 320 m/s is found for the Nb drops. This solidification speed is greater than or comparable to the solidification speeds calculated in splat cooled samples. Thus, a drop tube apparatus can be useful in the preparation and study of high temperature metastable compounds or alloys in bulk form.

Lacy, L. L.↗
NASA NTRS1981

Avenues and incentives for commercial use of a low-g environment

The processing of materials in a low-gravity (low-g) or microgravity environment is investigated by NASA for scientific and commercial utilization, and process and product development. The elimination of gravity is shown to create unique materials, and improve ground-based processes, such as convection, sedimentation, buoyancy, and containerless processing. Commercial applications are discussed, including the manufacturing of silicon ribbon, turbine blades, and various pharmaceuticals in space. Commercial incentives and needs are also discussed, including the technical exchange agreement, in which NASA and a company agree to cooperate in the conduct and analysis of research programs. In addition to establishing and demonstrating scientific and technological precepts for analyzing and using low-g environments, NASA is establishing legal and management mechanisms to share cost and risk of early commercial ventures.

Brown, R. L.↗
NASA NTRS1981

Defining critical point experiments for a space laboratory

Three representative low-gravity experiments for a fluid near its liquid-vapor critical point are being defined. Two of these experiments require very careful measurements of properties of the fluid in thermodynamic equilibrium, while the third experiment is a series of optical observations of the phenomena which occur as a fluid is changed from one phase to two phases, either by cooling through the critical point, or by adiabatic expansion. There is concern that residual spacecraft motions may complicate the interpretation of the data from the proposed experiments. It is possible that the Spacelab environment will render certain desirable experiments impractical.

Moldover, M. R.↗
NASA NTRS1979

Investigations on transparent liquid-miscibility gap systems

Sedimentation and phase separation is a well known occurrence in monotectic or miscibility gap alloys. Previous investigations indicate that it may be possible to prepare such alloys in a low-gravity space environment but recent experiments indicate that there may be nongravity dependent phase separation processes which can hinder the formation of such alloys. Such phase separation processes are studied using transparent liquid systems and holography. By reconstructing holograms into a commercial-particle-analysis system, real time computer analysis can be performed on emulsions with diameters in the range of 5 micrometers or greater. Thus dynamic effects associated with particle migration and coalescence can be studied. Characterization studies on two selected immiscible systems including an accurate determination of phase diagrams, surface and interfacial tension measurements, surface excess and wetting behavior near critical solution temperatures completed.

Lacy, L. L.↗