Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-temperature process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Impact of gasoline composition on the effects of nitric oxide on autoignition and knock in a DISI engine

Modern spark-ignition engines use exhaust gas recirculation (EGR) to dilute the charge and suppress knock, enabling the use of higher compression ratios and/or more optimum combustion phasing for higher efficiency. The effectiveness of EGR is affected by the composition of the fuel and its chemical-kinetic interactions with combustion products. Among those, nitric oxide (NO) has been shown to strongly affect autoignition reactivity. However, the impact of fuel composition of the effect of NO on reactivity is not well-understood. Here, in this study, engine experiments were conducted to assess the impact of NO seeded to the intake on knock-limited operation of two gasoline fuels (high cycloalkane content, or HCA, and high olefin content, or HO). Results showed that compositionally-different fuels responded differently to NO. HCA, which was less knock-limited than HO for NO < 200 ppm, became more knock-limited for NO > 200 ppm. Moreover, it was found that differences in knock between fuels were caused by differences in autoignition chemistry and not in the sequential autoignition process of the end gas that occurs due to thermal stratification. Chemical kinetic simulations were performed to better understand the experimental results. For HCA, intermediate-temperature heat release had a greater impact on autoignition reactivity than low-temperature heat release, while the opposite was observed for HO. For both fuels, NO enhances the magnitude of low-temperature heat release via NO + HO 2 → NO 2 + OH. The effect of NO on reactivity was stronger for HCA because OH produced from NO helped to overcome the OH quenching effect of cyclopentane, a main species in HCA. In contrast, HO had relatively strong inherent low-temperature chemistry arising from iso-octane, which reduced the impact of NO on reactivity. For the range of NO mole fractions tested in this study, in-cylinder NO increased fuel’s knock propensity, especially for fuels with mild low-temperature chemistry.

Autoignition↗
DOE OSTI2025

Impact of molten salt inflow on the temperature distribution in thermal energy storage tanks at startup for central receiver concentrating solar power plants

Concentrating Solar Power (CSP) systems with molten salt thermal energy storage (TES) tanks are one of the most promising, renewable-based energy conversion technologies for larger-scale power generation. The TES tank is one of the most critical components in CSP plants due to its high-temperature operation (up to 565 °C), daily thermal cycling, and intermittent solar radiation conditions. The plant startup is one of the most challenging operation conditions that could lead to damaging thermal gradients due to low salt inventory levels. In this study an analytical model for the sparger ring was developed and integrated with a detailed computational fluid dynamics model of a commercial-scaled molten salt tank. The integrated model allows an accurate representation of the tank operation to evaluate the effect of molten salt inflow on the mixing process. The tank filling process during plant startup was analyzed considering sparger rings with variations in design features, including inlet orifice configurations, number of orifices, direction of the inlets, and orifice diameter. The results demonstrated that higher temperature gradients are obtained in the tank floor during the plant startup. A sparger ring configuration with a predetermined orifice inlet inclination (30°, 45° and 60°) leads to significant temperature differences in the floor, between 57 °C and 62 °C, but better homogeneity in the temperature of the salt inventory. Lower salt inflow velocities result in a more homogeneous floor temperature, with maximum temperature differences under 38 °C. The sparger ring configuration with 52 orifices of 1-in. diameter and vertical flow showed better homogeneity in the temperature differences as a function of the salt level and lower temperature gradients in the tank floor. Because large temperature gradients in the tank's floor have been identified as one of the main factors contributing to tank failures, assessing various sparger ring design features is fundamental to determining proper inflow conditions that lead to low-temperature gradients and reducing failure susceptibility.

14 SOLAR ENERGY↗
DOE OSTI2026

The evolution of coal porosity during pyrolysis

Gasification of coal, municipal waste, or other organic materials is a potential hydrogen source that entails complex thermal decomposition and transport processes. This study provides a multiscale analysis of these processes for sub-bituminous (Usibelli, Healy, Alaska) and lignite (Center, North Dakota) coals and provides data useful for process design. The chemistry, mineralogy, and pore structures of pyrolyzed coal and their evolution with thermal decomposition are discussed. Samples pyrolyzed at 200–1000 °C were analyzed by small-angle neutron scattering; ultra-small, small-, and wide-angle X-ray scattering; and other complementary techniques. Scanning electron microscopy showed new pores in the high-temperature-pyrolyzed material. Upon heating, the coals became progressively denser, and the concentration of hydrogen decreased. Changes in pore volume fell into three temperature ranges: an initial, low-temperature range that, for the Usibelli coal, involved an increase in overall porosity; a mid-temperature range associated with pore volume loss; and a high-temperature range associated with significant porosity increase and char formation. This transformation was paralleled by changes in fractal dimension and correlation length. The higher the pyrolysis temperature the greater the small-pore-volume fraction and overall surface area became. Pyrolysis increased the lateral size of coal crystallites, decreased the amorphous fraction, and increased the aromatics fraction and overall coal rank. Comparisons of neutron and X-ray scattering data and subsequent water uptake studies showed that pre-dried coals can re-hydrate relatively rapidly upon exposure to air, which can significantly affect the porosity calculated from small-angle-scattering data. Fits to the cumulative porosity curves provide a method for modeling the physical and chemical transformation of hydrogen-containing feedstock during gasification.

Anovitz, Lawrence {Larry} [ORNL] (ORCID:0000000226↗
DOE OSTI2026

Ambient-Pressure Chemical Recycling of Thermoset Carbon Fiber-Reinforced Polymers via Low-Temperature Solvolysis: Techno-Economic and Life-Cycle Assessment

Carbon fiber-reinforced polymer (CFRP) waste is rapidly accumulating, with global volumes projected to exceed 500,000 tons annually by 2050. Virgin carbon fiber production is extremely energy- and cost-intensive, and growing demand has intensified supply-chain vulnerabilities associated with precursor availability and reliance on critical materials. Scalable recycling technologies therefore offer not only environmental benefits but also opportunities to reduce material costs and strengthen domestic composite supply chains. This study introduces an efficient, mild chemical recycling method for epoxy-amine CFRPs, utilizing acetic acid (80 wt%) and zinc acetate (1 wt%) at atmospheric pressure and low temperature (~110 °C). The solvolysis process preserves residual resin (~40%) on recycled carbon fibers (rCF), enhancing interfacial bonding in remanufactured composite materials. Recycled fibers retain ~90% of their mechanical properties, and recovered oligomers show potential for reuse in epoxy formulations, supporting material circularity. Techno-economic analysis (TEA) and life-cycle assessment (LCA) confirm the scalability and sustainability of this process.

Recycling CFRP↗
DOE OSTI2025

Large area transparent refractory aerogels with high solar thermal performance

Application of transparent silica aerogels in low-temperature solar thermal systems has led to major improvements in performance. In high temperature concentrating solar thermal (CST) systems, aerogels have yet to demonstrate the necessary scalability, durability, and performance to support their widespread deployment. Here, large-area transparent refractory aerogel tiles are synthesized and shown to achieve a record-high receiver figure-of-merit (FOM) at high temperatures. The work leverages a scaled-up process for sol–gel synthesis to control the density of the aerogels for improved solar transmittance and adapts a previous atomic layer deposition (ALD) technique with the aid of predictive reaction-transport modeling. After aging for 10 days at 700 °C, the large-area tiles exhibit a solar-weighted transmittance of 95.6 % and a thermal emittance of 0.31, corresponding to a FOM of 80 % at 100 suns and 700 °C. The observed sintering rates at 700 °C are comparably low to earlier one-inch aerogels, suggesting long-term stability under relevant operating conditions. Furthermore, the study indicates that refractory aerogels are scalable materials for efficient photothermal conversion at high temperatures.

Aerogels↗
DOE OSTI2025

A Combined Crossed Molecular Beam and Theoretical Investigation of the Elementary Reaction of Tricarbon (C 3 (X 1 Σ g + )) with Diacetylene (C 4 H 2 (X 1 Σ g + )): Gas Phase Formation of the Heptatriynylidyne Radical ( l -C 7 H(X 2 Π))

An elucidation of the underlying formation pathways to acyclic hydrocarbons such as polyynes (C n H 2 ), cumulenes (C n H 2 ), and linear resonantly stabilized linear radicals (l-C n H) is indispensable to understand the hydrocarbon chemistry in extreme low and high temperature environments. In this study, we exploited the crossed molecular beam technique to investigate the reaction of tricarbon C 3 (X 1 Σ g + ) with diacetylene (butadiyne; HCCCCH; X 1 Σ g + ) at a collision energy of 47 ± 1 kJ mol ⁻1 . The experimental data were merged with ab initio calculations of the singlet C 7 H 2 potential energy surface (PES) revealing that the reaction is initiated via the formation of an initial van der Waals reactant complex in the entrance channel. Subsequent rearrangements lead to various carbene-type and cyclic intermediates via ring-opening, ring-closure, and hydrogen migration processes eventually forming acyclic C 7 H 2 isomers prior to their barrierless unimolecular decomposition to the most stable linear isomer, heptatriynylidyne (C 7 H, X 2 Π) in an overall endoergic reaction (+57 kJ mol ⁻1 ). The reaction exhibits strong similarities to the tricarbon – acetylene (C 3 – C 2 H 2 ). Furthermore, the significant energy threshold suggests that the tricarbon reaction with (poly)acetylenes forming resonantly stabilized linear radicals are open in high-temperature environments such as combustion flames and circumstellar envelopes of carbon stars and planetary nebulae as their descendants; however, these reactions are closed in low-temperature environments as in cold molecular clouds and hydrocarbon-rich atmospheres of planets and their moons such as in Titan.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Patterned, Low-Temperature Growth of Transition Metal Dichalcogenides for Low Resistance Raised Contacts

Transition metal dichalcogenide (TMD) monolayers are promising channel materials for next-generation electronic devices. A challenge is the high contact resistance between monolayer TMDs and metal contacts, especially for holes. Here, in this regard, raised source/drain contacts are promising. However, the direct, patterned growth of raised contacts at CMOS-compatible temperatures remains largely unresolved. We present plasma-free selenization and sulfurization of metal oxides at substrate temperatures down to 400 °C, compatible with back-end-of-line thermal budgets. To achieve growth at such temperatures, gas-phase chalcogen precursors are first thermally activated at 950 °C. Films grown on single-crystal monolayer TMDs exhibit high crystal quality, as confirmed by transmission electron microscopy. Raised contacts on WSe 2 monolayers fabricated using this approach yield a low hole contact resistance of 0.3 kΩ·μm after chemical doping. This process is shown to be applicable to growing various TMDs, including WS 2 , MoSe 2 , MoS 2 , PtSe 2 , and NbS 2 .

contact engineering↗
DOE OSTI2025

Atomic Layer Deposition for Enhanced Light Confinement in Nonlinear Metasurfaces

Metasurfaces enable the generation of strong nonlinear signals, with nanoantenna resonances significantly enhancing the nonlinear response through tailored light–matter interactions. Commonly used nonlinear materials, such as lithium niobate and other similar crystals, have relatively moderate refractive indices, limiting their ability to achieve the strong mode localization attainable with high-refractive-index materials like silicon. Here, we report on enhancing mode confinement in nonlinear metasurfaces by employing conformal coatings of titania with atomic layer deposition (ALD). We develop a low-temperature ALD that enables the augmentation of resonances in materials that cannot withstand high-temperature processing, including polymers. We report on the design of a metasurface incorporating a nonlinear crystal and an ALD coating, achieving enhanced mode localization through this approach in the near-infrared wavelength range. We numerically demonstrate a significant enhancement in second-harmonic generation in the designed metasurface, achieved by optimizing the thickness of the ALD coating for the telecommunication wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Efficient Low-Temperature Direct Lithium Extraction from Chloride Brines Enabled by High-Capacity Sorbent

The demand for lithium, a key component in rechargeable batteries for electric vehicles and renewable energy storage systems, has surged in recent years. Meeting this demand requires efficient extraction methods that are both environmentally friendly and economically viable. This study investigates the utilization of the high-capacity sorbent amorphous aluminum hydroxide for enabling efficient direct lithium extraction at low temperatures. Traditional extraction methods often involve acid-leaching and energy-intensive processes that are not only expensive but also environmentally taxing. In contrast, our approach leverages the exceptional sorption properties of amorphous aluminum hydroxide to facilitate lithium extraction directly from brine, achieving extraction efficiencies of 94.4% in case 1 and 96.2% in case 2 at low temperatures. Kinetic modeling using the Avrami–Erofe’ev framework reveals a nucleation-growth mechanism ( n = 0.71, k = 0.131 h –1 ), providing quantitative insights into the solid-state phase transformation process. This method significantly reduces energy consumption and minimizes the environmental footprint. Through systematic experimentation and optimization, we demonstrate the effectiveness and scalability of our approach, highlighting its potential to revolutionize lithium extraction processes. Our findings highlight the potential of high-capacity sorbents, particularly amorphous aluminum hydroxide toward sustainable lithium production, contributing to the advancement of clean-energy technologies.

anions↗
DOE OSTI2025

Electrochemical Reduction Pathways from Goethite to Green Iron in Alkaline Solution with Silicate Additive

Energy-efficient and low-temperature iron electrolysis in alkaline solutions is a low-cost and sustainable ironmaking process with zero-carbon emissions when renewable electrical sources are involved. However, its implementation is hindered by electrochemically inert Fe 3 O 4 and parasitic H 2 gas formation during the electrochemical reduction process, resulting in the low energy efficiency of iron electrolysis. Here, we further explore the potential of electrochemical reduction of goethite (FeOOH) by employing a low concentration of silicate additive in an alkaline solution to mitigate Fe 3 O 4 accumulation and H 2 generation. Electrochemical measurements coupled with operando X-ray diffraction and X-ray absorption spectroscopy suggested FeOOH → Fe 3 O 4 → Fe(OH) 2 → Fe reduction pathways. Interestingly, a poorly crystalline or amorphous Fe(OH) 2 phase formed in the NaOH/silicate mixed electrolyte, possibly due to the inhibitive effect of silicate on water and ion transport, which eventually contributed to the improved reduction of Fe 3 O 4 , also supported by atomistic simulations. This work demonstrates the potential for silicate as a low-cost and effective electrolyte additive to improve room-temperature green iron formation via electrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrified vapour deposition at ultrahigh temperature and atmospheric pressure for nanomaterials synthesis

Vapour-phase synthesis methods have shown promise for the scalable synthesis of nanomaterials and coatings. However, the vaporization of different precursors for the synthesis of a broad nanomaterial space, particularly at atmospheric pressure, while maintaining compositional and structural control of the final product is challenging. Here we report the generation of an ultrahigh-temperature atomic vapour at atmospheric pressure based on electrified heating, for the growth of multi-elemental nanomaterials and thin films. This process relies on a reactor design whereby solid-state precursors are vaporized within a semi-confined space beneath an electrified heater that can reach ~3,000 K. The proximity of the heater rapidly breaks down the bonds of metal salt precursors and decomposes them into an atomic vapour that expands into a high-temperature (>2,000 K), highly reactive and high-flux vapour (10 21 –10 22 atoms per cm 2 per second) that travels upwards in a directional flow. When mixed with entrained ambient gases, the highly reactive atomic species rapidly nucleate and grow into the desired final products, including alloys, oxides, sulfides and thin films, which can be deposited on a low-temperature substrate. This EVD approach can synthesize a broad range of functional nanomaterials at atmospheric pressure, including single-phase multi-elemental nanomaterials formed under thermodynamically non-equilibrium conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optimization and quantification of silver( II ) for mediated electrochemical oxidation applications

Mediated electrochemical oxidation (MEO) is a low-temperature, low-pressure, aqueous mineralization process used to treat organic waste. A powerful metal oxidant is used as a mediator in an acidic solution. Although Ce and Co are thoroughly studied mediators, Ag is a preferred choice because of the higher efficiency rates of mineralization observed with this system. Importantly, the quantification methodology and spectroscopic characteristics of the Ag(II) ion must be obtained. In this study, we determined molar extinction coefficients of the primary absorption band associated with the Ag(II) ion in 2–9 M HNO 3 solution. The optimization of Ag(II) electrooxidation was also determined by altering parameters such as HNO 3 concentration, mediator concentration, and temperature. The optimization studies and extinction coefficient data provide parameters for implementation of Ag as a suitable mediator for MEO processing of organic waste.

Schrage, Briana R. [Oak Ridge National Laboratory ↗
DOE OSTI2025

Generation of strong fields with subcritical density plasmas to study the phase transitions of magnetized warm dense matter

Warm dense matter (WDM) is a regime where Fermi degenerate electrons play an important role in the macroscopic properties of a material. Recent experiments have brought us closer to understanding unmagnetized processes in WDM, but magnetized WDM remains unexplored because kilotesla magnetic fields are required. Although there are examples of field compression generating such fields by imploding pre-magnetized targets, these existing methods give no independent control over the parameters of the magnetized plasma and result in limited laser access for sample creation and diagnosis. In this paper, numerical simulations show that kilotesla magnetic fields can be obtained by shining laser beams onto the inner surface of a cylindrical target, rather than on the outer surface. This approach relies on field compression by a low-density, high-temperature plasma, rather than a high-density, low-temperature plasma, used in the more conventional approach. With this novel configuration, the region of peak magnetic field is mostly free of plasma, hence, other beams can reach a sample placed in the region of the peak field to form WDM and diagnose it.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Additive Manufacturing of Cryogenic Austenitic Steel JK2LB via Wire-Fed Directed Energy Deposition (DED) for Fusion Energy Applications

This study explores the feasibility of fabricating cryogenic austenitic steel JK2LB via both laser-based directed energy deposition (laser-DED) and arc-based directed energy deposition (arc-DED) additive manufacturing processes for potential application in fusion reactors. JK2LB, a low-nickel, high-manganese stainless steel developed for ITER, offers excellent cryogenic toughness, radiation resistance, and decay-to-clearance characteristics. Although JK2LB was originally designed to endure cyclic stresses at cryogenic temperatures in tokamaks, its low-temperature mechanical integrity and radiation tolerance also make it a promising candidate for structural components, such as the coil case/support structure in nonplanar high-temperature superconducting magnet assemblies in stellarators. Directed energy deposition (DED) additive manufacturing was selected for this study due to its capability to fabricate large structures with complex geometries. Here, to address the long lead time and high cost associated with acquiring conventional JK2LB solid wire, JK2LB powder-cored wire was developed as the feedstock material. Testing blocks were then fabricated using both wire-fed laser-DED and arc-DED processes. Microstructural and compositional analyses revealed that both DED approaches yield fully austenitic phase and columnar grain structures. Mechanical testing at room temperature revealed that both DED routes achieved yield strength and elongation comparable to those of conventionally processed JK2LB via vacuum melting, electroslag remelting, extrusion, and drawing, though ultimate tensile strength was reduced due to Mn loss and large columnar grains. As a study mainly focusing on the additive manufacturing process, this work demonstrates the potential of additive manufacturing for fusion energy applications and provides a basis for optimization and future cryogenic mechanical evaluation.

Cryogenic steel↗
DOE OSTI2025

Interface-sensitive microwave loss in superconducting tantalum films sputtered on c-plane sapphire

Quantum coherence in superconducting circuits has increased steadily over the last decades because of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic sources of loss found on niobium (Nb) or aluminum (Al) surfaces. However, the effects of film and interface microstructure on low-temperature microwave loss are still not well understood. Here, in this study, we present a systematic study of the structural and electrical properties of Ta and Nb films sputtered on c-plane sapphire at varying growth temperatures. As growth temperature was increased, our results show that the onset of epitaxial growth of α -phase Ta correlates with lower Ta surface roughness, higher critical temperature, and higher residual resistivity ratio, but surprisingly also correlates with a significant increase in loss at microwave frequency. Notably, this high level of loss is not observed in Nb films prepared in the same way and having very similar structure. By experimentally controlling the surface on which the Ta film is nucleated, we determine that the source of loss was only present in samples having an epitaxial Ta/sapphire interface and show that it was apparently mitigated by either growing a thin, epitaxial Nb interlayer between the Ta film and the substrate or by intentionally treating, and effectively damaging, the sapphire surface with an in situ argon plasma before Ta growth. In addition to elucidating this interfacial microwave loss, this work provides adequate process details to aid reproducible growth of low-loss Ta films across fabrication facilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

A low-temperature, one-step synthesis for monazite can transform monazite into a readily usable advanced nuclear waste form

It has been demonstrated that monazite-type materials are excellent candidates for nuclear waste forms, and hence, their facile synthesis is of great importance for the needed sequestration of existing nuclear waste. The synthesis of monazite, LaPO 4 , requires inconveniently high temperatures near 1000°C and generally involves the conversion of the presynthesized rhabdophane, LaPO 4 •nH 2 O, to the LaPO 4 monazite phase. During this structure transformation, the rhabdophane converts irreversibly to the thermodynamically stable monoclinic monazite structure. A low-temperature (185° to 260°C) mild hydrothermal acid-promoted synthesis of monazite is described that can both transform presynthesized rhabdophane or assemble reagents to the monoclinic monazite structure. The pH dependence of this reaction is detailed, and its applicability to the LnPO 4 (Ln = La, Ce, Pr, Nd, Sm-Gd), Ca 0.5 Th 0.5 PO 4 , and Sr 0.5 Th 0.5 PO 4 systems is discussed. The crystal growth of Ca 0.5 Th 0.5 PO 4 and Sr 0.5 Th 0.5 PO 4 is described, and their crystal structures were reported. In situ x-ray diffraction studies, performed as a function of temperature, provide insight into the structure transformation process.

Biogeochemistry↗
DOE OSTI2025

In-Tank Processing Using Low Temperature Aluminum Dissolution: Year 1 Progress Report

The Hanford Site stores approximately 56 million gallons of radioactive legacy defense waste in underground tanks. This study investigates the feasibility of utilizing in-tank low-temperature aluminum dissolution to favorably alter the transport properties of aluminum-rich southeast quadrant waste sludges, thereby de-risking sludge delivery for Direct Feed of High-Level Waste. Specifically, this study aims to assess the rate and extent of gibbsite dissolution under various conditions, including different particle sizes (~10 to 90 µm), NaOH concentrations (1 to 6 M), and the presence of specific analytes such as NO 2 - , NO 3 - , and other aluminum-rich waste background analytes, using simulated waste solids and liquids. Experimental tests were designed to highlight the impact of aluminum leaching on simulated waste transport properties, quantified by the just-suspended mixing speed (NJS), and were conducted under well-mixed, turbulent conditions, ensuring full suspension of gibbsite particles using an overhead mixer. The results suggest that the presence of NO 2 - and NO 3 - , in conjunction with leaching at relatively low free hydroxide contents, improved transport requirements (i.e., lowered NJS) for pure gibbsite slurries. These findings will inform the design of potential in-tank processing systems, optimizing aluminum dissolution for improved waste management in the Hanford Tank Farms.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Advancing a Low-Temperature, Low-Cost Direct Air Capture System Based on Organic Chemistry

Holocene Climate Corporation (Holocene) partnered with Oak Ridge National Laboratory (ORNL) to conduct bench-scale testing of a new optimized Direct Air Capture (DAC) process to assist the U.S. Department of Energy (DOE) in achieving the Carbon Negative Shot target of under $\$$100/net tonne CO₂ removed by 2031. Holocene’s DAC process for carbon dioxide (CO₂) removal uses amino acids and guanidine compounds, an ORNL-invented chemical process and licensed by Holocene. Holocene will use this novel chemistry to develop a new process and deploy the technology commercially.

36 MATERIALS SCIENCE↗