Search NASA⌕ Search

SEARCH · Search NASA

Results for “lowland”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

An estimate of the amount of a material removed from the Martian fretted terrain

An estimate is made of the volume of plateau material removed from the area of Martian fretted terrain between 270 W and 360 W. Depending on the model chosen for the former extent of plateau, between 0.5 and 3.3 million cubic km have been removed. This corresponds to a global equivalent layer between 3 and 21 m or a lowland equivalent layer between 9 and 60 m of redistributed sediment. The preferred model is at the lower end of this range. The material could have been removed during a relatively short period of Martian history by aeolian abrasion following in situ weathering. The volume of material is an order of magnitude smaller than the total amount likely to be present in the northern lowlands.

Dimitriou, Andrew↗

New Martian paradigms

Several interrelated paradigms concerning the nature and the evolution of Mars are discussed. These include an impact origin of the northern lowland, Mars as a water-rich planet, former oceans in the northern lowlands, a warm wet climate on early Mars, and the possibility of ancient life on Mars. Locations on Mars suggested for the search of possible ancient life include the heavily cratered terrain dissected by valley networks, possible lacustrine deposits in Valles Marineris, the oxidizing layer below the surface, sites along the fringes of the hypothetical northern circumpolar ocean, and in evaporite deposits.

Mcewen, Alfred S.↗

Dynamic models for ridge belt formation on Venus

The hypothesis is tested that the lithospheric shortening expressed by the ridge belts is the result of convective downwelling beneath the lowland planitia. Dynamical models are developed for the interaction of mantle convection with the crust and the models are compared to the characteristics of the ridge belts in Lavinia Planitia. The models support the hypothesis that convective stresses can produce the broad topographic depression of lowlands on Venus and can lead to the formation of ridge belts on either side of the topographic low.

Simons, Mark↗

Yana ring structure, North-Eastern Siberia: A possible counterpart of coronae on Venus

An arch of Verkhoyansky Range in NE Siberia, Russia is considered as W and S parts of the rim of the large ring structure, referred hereafter as Yana Ring Structure (YRS). It has general appearance similar to coronae on Venus and could be considered as the terrestrial counter part of coronae. The structure is located between 63 and 70 deg N, 125 and 140 deg E. The outer diameter of YRS (between the rim feet) is 680-700 km. The rim crest diameter is 500-520 km. The inner diameters (between the inner feet of the rim) is 320-350 km. The rim of YRS consist of the following topographic features: W segment is Orulgan Range (N part of Verkhoyansky Range), SW and S segments consist of S part of Verkhoyansky Range, SE segment is Elginskoye Ploskogorye (Tableland), E segment is Chersky Range (its part W of Indigirka River), NE segment is Selennyakhsky Range, and NW segment is Kular Range. Inside this ring of mountains Yanskoye Ploskogorye (Tableland) is located. The circular outlines of YRS are marked with the large river valleys located outside: Lena River (lower of Aldan River mouth) is located W from YRS, Aldan River (lower of Amga River mouth) is from S, Indigirka River (between 64 and 67 deg N lat) is from E, and Selennyakh River (the part running N to S) is from NE. The ring patterns inside the mountaineous rim of YRS are marked with the tributaries of Yana River. The largest ring here, 300 km in diameter, consists of Bytangay (with Bellyakh) River at W, Nelgese and Derbeke Rivers at S/SE, and Tuostakh River at E. The typical altitudes of YRS mountain rim are 1000-2000 m. The maximal ones are: 2400 m in W part of the rim, 2300 m in S, 1600 m in SE, 2200-2500 m in E, and 1300-1500 m in N. The central part of YRS have typical altitudes of 400-600 m. There are lowlands with altitudes 50-200 m to the S, W, N, and NW outside YRS Oymyakonskoye Nagorye (Highland) is located SE of YRS at 500-1500 m altitudes. It should be recognized from this description YRS have a general appearance of circular highland with its central plateau located 1000-2000 m lower than surrounding mountain rim, but 300-400 m higher than plains of lowlands located outside the rim. Such topographic patterns are typical for coronae on Venus. The diameter of YRS is equal to the largest coronae on Venus. There are only 3 or 4 structures of such or larger size on the whole Venus. This calls to compare morphology and geologic evolution of YRS with morphology and models of coronae evolutions especially the largest ones, to search the similarities and/or differences in geologic histories of the structures on the Earth and Venus.

Burba, G. A.↗

Galileo/NIMS near-infrared thermal imagery of the surface of Venus

Numerous highland and lowland features on the surface of Venus are observed in multispectral imagery acquired at approximately 50 km spatial resolution by the Near-Infrared Mapping Spectrometer (NIMS) on board the Galileo spacecraft in Feb. 1990. Specifically, such features are observed at 1.18 microns, a wavelength particularly sensitive to thermal emission from the hot, lower atmosphere (less than 10 km) and surface, and show up particularly well when this image is 'de-clouded' using a simultaneously-acquired 2.3-microns image of the upper, cloudy atmosphere. Due to the steep atmospheric temperature gradient (approximately 8 degrees per kilometer), hot lowland areas appear relatively bright, while cooler, highland areas appear dark (due to the steep atmospheric temperature gradient - approximately 8 degrees per kilometer - surface temperatures span approximately 100 K over the 13 kilometer range of surface altitudes observed in this image). Prominent highland features include Maxwell Montes (approximately 12 km altitude), Alpha Regio (2.5 km), Eistla Regio (approximately 2.0 km), Bell Regio (2-3 km), and the western edge of Aphrodite Terra (2-2.5 km). Low-lying regions include Sedna Planitia (-1.0 km), Tinatin Planitia (-0.5 km), and the Bereghinya Planitia (0 km). From correlations with radar altimetry maps, such imagery may place useful constraints on surface emissivity and temperature variations, as well as on the nature of continuum opacity of CO2 in the 1-micron region.

Carlson, R. W.↗

Relation between ages and elevations of Martian channels

Mapping highland and lowland channels and reassessing their time-stratigraphic positions shows that many channels in the cratered highlands are younger than Noachian, that all channels in the lowland plains are Hesperian or younger, and that although Martian channels formed throughout the planet's history, the rate of their formation appears to have declined with time. This detailed examination of the age relation between Martian terrains and the channels that transect them was made possible by the completion of the global geologic maps of Mars and the availability of other geologic maps at scales of 1:5,000,000, 1:2,000,000, and 1:500,000. The present study focuses on the sources (heads) of the channels of the initial study to see if there is a relation between channel age and elevation.

Dohm, James M.↗

Ridge belt-related scarps and troughs: Compressional crustal bending on Venus

Cytherean ridge arcs resulted in crustal shortening in places with either the strongest compression or weakest surface layers. Arcuate scarps on or close to the edge of the ridge arcs were compressional fronts formed by overthrust over or subduction of adjacent lowland. These ridge arcs became wider due to the propagation of new ridge formation close to previous one(s). As this process repeated itself with time, the crust became thicker and the foreland was bent either due to the excess load, overthrust or subduction event. The Salme Dorsa arc measures 100 km in width and 600 km in length. It consists of a horseshoe-like set of ridges and grooves on a gently sloping lowland. The westward arcuate ridge belt indicates lateral compressional stresses and crustal deformation from SE against the southern Ishtar Terra foreland plain. The trough on the western side of the ridge belt and tensional grabens close to the crest of the bulge to the west of the trough are due to the crustal bending and indicate effects of the load and thrust. Compression and relative movement from southeast against and over the foreland planitia have resulted in ridge belt, trough and bulge formation. The load- and/or stress-induced bending of the uppermost crust allows some estimations of the uppermost elastic lithosphere thickness. Repeated folding and thrust faulting of surface layers due to compression are indicated by four more ridge belts located close to Salme Dorsa. The northeasternmost one has short ridges located in troughs. The west-opening arcuate ridge belt interlocks with the Salme Dorsa horseshoe.

Raitala, J.↗

Sampling the Old and the New: Landing Site Proposals for the Dichotomy Boundary (6 S,210 W) and the Ares Vallis Headlands (2 S,18 W)

One of the goals of the Mars Pathfinder mission was to sample a diversity of rocks deposited by the Ares and Tiu Vallis floods. It was hoped that ancient highlands and younger lowlands material could be studied, as well as a diversity of rocks within these regions. Although Pathfinder found rocks that exhibited a number of textures and morphologies, several factors precluded the identification of a petrologic suite of rocks, if it was present. Namely among these were 1) The lack of geologic context for the rocks examined, 2) instrument limitations, and 3) pervasive dust and possible weathering finds. Based on the Pathfinder experience and incorporating recent results from Mars Global Surveyor and previous missions, two landing sites are proposed that can potentially overcome this problem and offer samples of ancient and recent Martian rock. The first site is at the dichotomy boundary, where ancient highlands and more recent lowlands meet. The second site is at the Ares Vallis headlands, where some of the source materials for the Pathfinder landing site may have been derived. Both of these sites meet the remote sensing and elevation constraints of the 2001 Lander mission but exhibit significant slopes and potential hazards in places. However, a properly placed ellipse can alleviate much of the concern, thereby offering two exciting sites that otherwise would not be chosen.

Bridges, N. T.↗

Using Climate Models to Evaluate Mechanisms of Glacial Inception

The initiation and subsequent growth of an ice sheet or large glacier is based on two primary factors: 1. Most fundamentally, a region must exist with a positive net snow accumulation, that is, cold season snowfall exceeds warm season snowmelt. Because snow can melt very rapidly, in a practical sense this probably means that little or no snow melt should occur in the warm season (mountain glaciers being one possible exception). 2. When sufficient ice builds in a region with a positive net snow accumulation, the ice will flow into adjoining regions with a negative mass balance. Feedbacks can also then arise between the emerging ice sheet and the overall climate, which, among other effects, may cause the mass balance in that region to turn positive. A key question is the relative importance of these two factors. In particular, is it possible for a large lowland region to experience a positive mass balance, such that the ice sheet can arise largely 'in-situ'? Or instead are uplands necessary, such that essentially mountain glaciers form first, and then, under the right conditions, grow and coalesce, eventually spreading out into the lowlands? This is probably the single most fundamental question to be addressed in the modeling of glacial inception. Other key questions then focus on how the (upland or low-land) positive mass balance is obtained at some times, but not others (the ice sheets are not continuously present). For Northern Hemisphere ice sheets in particular, what climatic conditions can lead to abundant winter snowfall in the Canadian Arctic and northern Labrador in conjunction with cool summertime conditions? Are both required, or will cool summer conditions alone suffice? Conversely, are a few years of abnormally heavy snowfall all that is required to trigger glacial inception? A major need at present is for carefully constructed climate model studies aimed at addressing these questions. A successful strategy will almost certainly require more than just a global model; while the global climate model might be necessary to properly simulate large-scale forcing, such models have insufficient spatial resolution to adequately address the roles of topography and the nature of the land surface. Necessary also is the use of a high-resolution regional climate model (in conjunction with a global model). Possible forcing mechanisms of Pleistocene ice ages are well known (e.g., orbital forcing; CO2 fluctuations) but we must understand and be able to successfully model the actual processes involved in glacial inception before we can fully understand the true roles played by these forcing mechanisms.

Oglesby, Robert J.↗

Volatile-rich Crater Interior Deposits on Mars: An Energy Balance Model of Modification

Several craters on Mars are partially filled by material emplaced by post-impact processes. Populations of such craters include those in the circumsouth polar cap region, in Arabia Terra, associated with the Medusae Fossae Formation, and in the northern lowlands proximal to the north polar cap. In this study, crater fill material refers to an interior mound, generally separated from the interior walls of the crater by a trough that may be continuous along the crater s circumference (i.e. a ring-shaped trough), or may only partially contact the crater walls (i.e. a crescent-shaped trough). The fill deposit is frequently off-center from the crater center and may be asymmetric, (i.e. not circular) in plan view shape. Here we test the hypothesis that asymmetries in volatile fill shape, profile, and center-location within a crater result from asymmetries in local energy balance within the crater due mainly to variation of solar insolation and radiative effects of the crater walls over the crater interior. We first focus on Korolev crater in the northern lowlands. We can then apply this model to other craters in different regions. If asymmetry in morphology and location of crater fill are consistent with radiative-dominated asymmetries in energy budget within the crater, then 1) the volatile-rich composition of the fill is supported (this process should not be effective at shaping volcanic or sedimentary deposits), and 2) the dominant factor determining the observed shape of volatile-rich crater fill is the local radiative energy budget within the crater (and erosive processes such as eolian deflation are not necessary).

Russell, Patrick S.↗

Western Rainier Seismic Zone Airborne Laser Swath Mapping

Airborne laser swath mapping (ALSM) of the Puget Lowland conducted by TerraPoint LLC for the Purget Sound Lidar Concortium (PSLC), has been successful in revealing Holocene fault scarps and lendsliders hidden beneath the dense, temperate rain forest cover and in quantifying shoreline terrace uplift. Expanding the PSLC efforts, NASA-USGS collaboration is now focusing on topographic mapping of seismogenic zones adjacent to volcanois in the western Cascades range in order to assess the presence of active faulting and tectonic deformation, better define the extend of lahars and understand their flow processes, and characterize landslide occurrence. Mapping of the western Rainier zone (WRZ) was conducted by TerraPoint in late 2002, after leaf fall and before snow accumulation. The WRZ is a NNW-trending, approx. 30 km-long zone of seismicity west of Mount Rainier National Park. The Puget Lowland ALSM methods were modified to accommodate challenges posed by the steep, high relief terrian. The laser data, acquired with a density of approx. 2 pulses /sq m, was filtered to identify returns from the ground from which a bare Earth digital elevation model (DEM) was produced with a grid size of 1.8 m. The RMS elevation accuracy of the DEM in flat, unvegetated areas is approx. 10cm based on consistency between overlapping flight swaths and comparisons to ground control points. The resulting DEM substantially improves upon Shuttle Radar Topography Mission and USGS photogrammetric mapping. For example, the DEM defines the size and spatial distribution of flood erratics left by the Electron lahar and of megaclasts within the Round Pass lahar, important for characterizing the lahar hydraulics. A previously unknown lateral levee on the Round Pass lahar is also revealed. In addition, to illustrating geomorfic feature within the WRZ, future plans for laser mapping of the Saint Helens and Darrington seismic zones will be described.

Harding, David J.↗

Topographic Analysis of Quasi-Circular Depressions Around the Utopia Basin, Mars

The Mars Orbiting Laser Altimeter (MOLA) has yielded a high-precision, topographic gridded data set. These data reveal the presence of Quasi-Circular Depressions (QCDs) in both the southern highlands and the northern lowlands . Many of these roughly circular depressions have no corresponding visible structural feature on the surface. It is proposed that these QCDs are the surface representation of buried impact craters . Based on this assumption, cumulative number vs. diameter curves were constructed, which placed the age of the buried surface of the northern lowlands in the Early Noachian .

Buczkowski, D. L.↗

Mars Data Analysis Program

Grant NAGS12158 addressed a major NASA objective concerning the possibility of a palm ocean or large lake in the northern lowlands of Mars. Our overall approach for this study was an analysis of the graben-bounded giant polygons of Utopia Planitia, but specifically those grabens that define circles rather than open polygons. These circular grabens overlie buried impact craters, and the grabens form because of differential compaction of the overlying material over crater rims and floors. Several years ago, I predicted that the graben circles would bound depressions, and that the depths of these depressions would scale with the diameters of the graben circles. These predictions have been verified by earlier analysis. During this one-year grant (with one-year no-cost extension) we greatly increased the sample size and validated the earlier research robustly. What remained unexplained was why most of the graben circles in Utopia Planitia were double. A new model, involving volumetric compaction rather than simply 2-D compaction, satisfactorily explains the double rings and also provides a measure of relative thickness of the cover material burying the craters as a function of radial distance from the center of the Utopia Basin. Only two materials are likely candidates for the compacting cover material: volcanic ash, or wet sediment. The water in the wet sediment is largely responsible for the volumetric compaction; dry ash will compact vertically but experiences very limited lateral shrinkage. Thus the depressions within the circular grabens and the model explaining the double rings strongly favor wet sediment and thus provide evidence in favor of a past body of standing water in the northern lowlands. Publications supported entirely or in part by this grant are listed below.

McGill, George E.↗

Adaptation, plant evolution, and the fossil record

The importance of adaptation in determining patterns of evolution has become an important focus of debate in evolutionary biology. As it pertains to paleobotany, the issue is whether or not adaptive evolution mediated by natural selection is sufficient to explain the stratigraphic distributions of taxa and character states observed in the plant fossil record. One means of addressing this question is the functional evaluation of stratigraphic series of plant organs set in the context of paleoenvironmental change and temporal patterns of floral composition within environments. For certain organ systems, quantitative estimates of biophysical performance can be made on the basis of structures preserved in the fossil record. Performance estimates for plants separated in time or space can be compared directly. Implicit in different hypotheses of the forces that shape the evolutionary record (e.g. adaptation, mass extinction, rapid environmental change, chance) are predictions about stratigraphic and paleoenvironmental trends in the efficacy of functional performance. Existing data suggest that following the evolution of a significant structural innovation, adaptation for improved functional performance can be a major determinant of evolutionary changes in plants; however, there are structural and development limits to functional improvement, and once these are reached, the structure in question may no longer figure strongly in selection until and unless a new innovation evolves. The Silurian-Devonian paleobotanical record is consistent with the hypothesis that the succession of lowland floodplain dominants preserved in the fossil record of this interval was determined principally by the repeated evolution of new taxa that rose to ecological importance because of competitive advantages conferred by improved biophysical performance. This does not seem to be equally true for Carboniferous-Jurassic dominants of swamp and lowland floodplain environments. In these cases, environmental disruption appears to have been a major factor in shaping the fossil record. This does not mean that continuing adaptation was not important during this interval, but it may indicate that adaptive evolution was strongest in environments other than those best represented in the paleobotanical record.

NASA Discipline Exobiology↗

Crustal Evolution of the Protonilus Mensae Area, Mars

Despite research by numerous geologists and geo- physicists, the age and origin of the martian crustal dichotomy remain uncertain. Models for the origin of this dichotomy involve single or multiple impact, mantle megaplumes, primordial crustal asymmetry, and plate tectonics. Most of these models imply a Noachian age for the dichotomy. A major problem common to all genetic models is the difficulty separating the features resulting from the primary cause for the dichotomy from features due to younger fault- ing, impact cratering, volcanism, deposition, and erosion. highlands (the dichotomy boundary) approximates a small circle that ranges in latitude from about -10 deg. in Elysium Planitia to about +45 deg. north of Arabia Terra. For much of its length the boundary is characterized by relatively steep scarps separating highland plateau to the south from lowland plains to the north, generally with a complex transition zone on the lowland side of these scarps. These scarps are almost certainly due to normal faulting. The type fretted terrain, which defines the boundary in north-central Arabia Terra, also is characterized by scarps but has under- gone a more complex history of faulting and dissection [13]. In some places, notably in the Acidalia Planitia region, the dichotomy boundary is gradational. In the Tharsis region the boundary is obscured by younger volcanics.

McGill, G. E.↗

Subsurface Structure of the Ismenius Area and Implications for Evolution of the Martian Dichotomy and Magnetic Field

The Martian dichotomy divides the smooth, northern lowlands from the rougher southern highlands. The northern lowlands are largely free of magnetic anomalies, while the majority of the significant magnetic anomalies are located in the southern highlands. An elevation change of 2-4 km is typical across the dichotomy, and is up to 6 km locally. We examine a part of the dichotomy that is likely to preserve the early history of the dichotomy as it is relatively unaffected by major impacts and erosion. This study contains three parts: 1) the geologic history, which is summarized below and detailed in McGill et al., 2) the study of the gravity and magnetic field to better constrain the subsurface structure and history of the magnetic field (this abstract), and 3) modeling of the relaxation of this area. Our overall goal is to place constraints on formation models of the dichotomy by constraining lithospheric properties. Initial results for the analysis of the geology, gravity, and magnetic field studies are synthesized in Smrekar et al..

Smrekar, S. E.↗

Mars Express HRSC View of Western Olympus Mons: Evidence for Ice-bearing Deposit and High-Altitude Glaciation

This study is based on the geological analysis of the HRSC images taken on the orbit 0143 (12 m/px in nadir channel). The study area includes the western segment of Olympus Mons and the adjacent lowland plains (Fig. 1). Part of the volcano above the scarp is rather flat and is called "summit plateau" below. What is often called the volcano scarp is a slope classified into three morphologic types: Type 1 (S1 in Fig.1) is the steepest and dominated by ravines in its upper part and by talus beneath; Type 2 (S2) is intermediate in steepness and dominated by downslope trending linear depressions, part of which have channel-like morphology; and Type 3 (S3), is the most gentle and covered by lava flows, continuing from the summit plateau down to the lowland plains.

Basilevsky, A. T.↗

Distribution of Aboveground Live Biomass in the Amazon Basin

The amount and spatial distribution of forest biomass in the Amazon basin is a major source of uncertainty in estimating the flux of carbon released from land-cover and land-use change. Direct measurements of aboveground live biomass (AGLB) are limited to small areas of forest inventory plots and site-specific allometric equations that cannot be readily generalized for the entire basin. Furthermore, there is no spaceborne remote sensing instrument that can measure tropical forest biomass directly. To determine the spatial distribution of forest biomass of the Amazon basin, we report a method based on remote sensing metrics representing various forest structural parameters and environmental variables, and more than 500 plot measurements of forest biomass distributed over the basin. A decision tree approach was used to develop the spatial distribution of AGLB for seven distinct biomass classes of lowland old-growth forests with more than 80% accuracy. AGLB for other vegetation types, such as the woody and herbaceous savanna and secondary forests, was directly estimated with a regression based on satellite data. Results show that AGLB is highest in Central Amazonia and in regions to the east and north, including the Guyanas. Biomass is generally above 300Mgha(sup 1) here except in areas of intense logging or open floodplains. In Western Amazonia, from the lowlands of Peru, Ecuador, and Colombia to the Andean mountains, biomass ranges from 150 to 300Mgha(sup 1). Most transitional and seasonal forests at the southern and northwestern edges of the basin have biomass ranging from 100 to 200Mgha(sup 1). The AGLB distribution has a significant correlation with the length of the dry season. We estimate that the total carbon in forest biomass of the Amazon basin, including the dead and below ground biomass, is 86 PgC with +/- 20% uncertainty.

rainforest↗