SEARCH · Search NASA

Results for “magnetic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Design, calibration, and performance of a uniaxial pressure cell for neutron scattering studies of quantum magnetism

Here we provide an overview of a pressure cell designed to apply uniaxial pressure to single crystals for the study, by neutron scattering techniques, of strongly correlated magnetic systems and, in particular, quantum magnets. A detailed overview of the pressure cell components, their requirements, and links to the scientific and technical specifications are presented. The pressure cell is able to accommodate a 200 mm 3 single crystal that can be pressurized up to 2 GPa at cryogenic temperatures. The pressure cell is consistent with the requirements of inelastic neutron scattering and, importantly, neutron polarization analysis. A particular strength of the uniaxial pressure cell is the highly uniform and low background for a wide scattering angle of 360° horizontally and ±20° vertically. We show the performance of the uniaxial pressure cell using a relevant neutron scattering instrument, the polarized diffuse scattering instrument, D7. The experiments confirm that the cell complies with the scientific and technical requirements. This uniaxial pressure cell will provide a useful additional tool in the sample environment suite available for the study of quantum magnetism.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

Intrinsic exchange bias from interfacial reconstruction in an epitaxial Ni x Co y Fe 3– x – y O 4 (111)/α-Al 2 O 3 (0001) thin film family

Intrinsic exchange bias is known as the unidirectional exchange anisotropy that emerges in a nominally single-component ferro-(ferri-)magnetic system. In this work, with magnetic and structural characterizations, we demonstrate that intrinsic exchange bias is a general phenomenon in (Ni, Co, Fe)-based spinel oxide films deposited on α-Al 2 O 3 (0001) substrates, due to the emergence of a rock-salt interfacial layer consisting of antiferromagnetic CoO from interfacial reconstruction. We show that in Ni x Co y Fe 3–x–y O 4 (111)/α-Al 2 O 3 (0001) films, intrinsic exchange bias and interfacial reconstruction have consistent dependences on Co concentration y, while the Ni and Fe concentration appears to be less important. This work establishes a family of intrinsic exchange bias materials with great tunability by stoichiometry and highlights the strategy of interface engineering in controlling material functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

MLSPICE: Machine Learning based SPICE Modeling Platform for Power Magnetics

Electrical power converters are critical to a wide range of applications ranging from renewable integration to transportation electrification, and can be a key factor determining the size, weight, and efficiency of energy conversion systems. Magnetic components are typically the largest and least efficient components in power electronics. While there have been major strides in the modeling and analysis of power semiconductor devices and circuit simulations, the necessary advances in the design of power magnetics have lagged. In this project, we have transformed the modeling and design of power magnetics with machine learning enabled methods and catalyze simultaneous disruptive improvements for ML-based power electronics design tools. A fully automated open-source machine learning based magnetics modeling platform – the MagNet project - with innovations in full stack have been developed to greatly accelerate the design process and provide new insights to magnetic material and geometry design. The ARPA-E funded MagNet platform contains three major building blocks: 1) a ML-Integrated Data Acquisition System (MIDAS): a highly automated data acquisition testbed which is capable of measuring a large number of magnetic cores with a wide range of electrical circuit excitations; 2) a ML-integrated Core Loss Model (MICLM): a machine-learning trained modeling method for modeling the core loss and saturation effects of magnetic materials for arbitrary excitation waveforms; 3) ML-guided Magnetics SPICE Simulation Tool (PMSPICE): a fully integrated CAD tool which can simulate the magnetics in SPICE. It can help the designers to quickly model the linear and non-linear characteristics of magnetic components and evaluate their behavior in SPICE simulations. The developed MagNet system has fully demonstrated the proposed performance target and has been open sourced to the entire power electronics community to advance the modeling and design of power magnetics from many different angles.

36 MATERIALS SCIENCE↗

DOE OSTI2023

A Flexible Field Mapping System for Accelerator Magnets

Magnetic field mapping is a fundamental magnetic measurement method that typically uses Hall and NMR sensors. In magnet measurement facilities, such systems are likely used in various configurations suitable for a specific task at hand. To address this diversity, the authors developed a flexible field mapping system capable of being configured and tailored to each particular measurement case. Further, the system needs to address the variability introduced by differences in sensors and their readout systems, probe positioning systems, power supply systems, and required mapping geometry (mapping space and grid, measurement steps and sequences). Although the discussed field mapping systems range from a self-propelled multi-sensor mapper of a large detector magnet to a single 3D Hall sensor system to scan a small permanent magnet, they were all built with the same core mapping system. The variability present in field mapping systems, the measurement system architecture addressing this variability, as well as examples of several field mapping systems built in this architecture are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Electronic signatures of successive itinerant, antiferromagnetic transitions in hexagonal La 2 Ni 7

We use high-resolution angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations to study the electronic and magnetic properties of La 2 Ni 7 , an itinerant magnetic system with a series of three magnetic transition temperatures upon cooling, which end in a small moment antiferromagnetic (smAFM) ground state. Our APRES data reveal several electron and hole pockets that have hexagonal symmetry near the Γ point. We observe significant reconstruction of the band structure upon successive magnetic transitions at T 1 ~ 61 K, T 2 ~ 57 K and T 3 ~ 42 K. Several features observed in ARPES data were reasonably well reproduced by DFT calculations, while others were not. In particular, the flat band near E f predicted by DFT in AFM state, was seemingly absent in ARPES data. Our results detail the effects of magnetic ordering on the electronic structure in a Ni-based small moment antiferromagnet and highlight challenges of current computational methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Systems and methods for additive manufacturing magnetic solenoids

Systems and methods for forming a magnetically-enabled part via additive manufacturing. The method includes depositing a layer of additive manufacturing material on a build plate, melting or sintering the layer of additive manufacturing material, depositing additional layers of additive manufacturing material on previous layers of additive manufacturing material, the additive manufacturing material of at least some of the additional layers being magnetically permeable, and melting or sintering the additional layers of additive manufacturing material such that the magnetically-enabled part has a transition region including at least some of the magnetically permeable additive manufacturing material.

Hatch, Jonathan Douglas↗

DOE OSTI2024

Systems and methods for additive manufacturing magnetic solenoids

Hatch, Jonathan Douglas↗

DOE OSTI2023

A Flexible Field Mapping System for Accelerator Magnets

Magnetic field mapping is a fundamental magnetic measurement method that typically uses Hall and NMR sensors. In magnet measurement facilities, such systems are likely used in various configurations suitable for a specific task at hand. To address this diversity, the authors developed a flexible field mapping system capable of being configured and tailored to each particular measurement case. The system needs to address the variability introduced by differences in sensors and their readout systems, probe positioning systems, power supply systems and in required mapping geometry (mapping space and grid, measurement steps and sequences). Although the discussed field mapping systems range from a self-propelled, multi-sensor mapper of a large detector magnet to a single 3D Hall sensor system to scan a small permanent magnet, they were all built with the same core mapping system. The variability present in field mapping systems and the measurement system architecture addressing this variability, as well as examples of several field mapping systems built in this architecture are presented.

43 PARTICLE ACCELERATORS↗

DOE OSTI2026

Quantum critical point followed by Kondo-like behavior due to Cu substitution in the itinerant antiferromagnet La 2 ⁢(Cu 𝑥 ⁢Ni 1−𝑥 ) 7

La 2 ⁢Ni 7 is an itinerant magnetic system with a small ordered moment of ∼ 0.1⁢µ 𝐵 /Ni and a series of antiferromagnetic (AFM) transitions at 𝑇 1 = 61.0K, 𝑇 2 = 56.5K, and 𝑇 3 = 42.2K. 𝑀 ⁡(𝐻), and 𝜌 ⁡(𝐻) isotherms as well as constant field 𝑀⁡ (𝑇) and 𝜌 ⁡(𝑇) measurements on single-crystalline samples manifest a complex, anisotropic 𝐻−𝑇 phase diagram with multiple phase lines. Here, in this study, we present the growth and characterization of single crystals of the La 2 ⁢(Cu 𝑥 ⁢Ni 1−𝑥 ) 7 series for 0 ≤ 𝑥 ≤ 0.181. We measured powder x-ray diffraction and composition, as well as anisotropic temperature- and field-dependent resistivity, temperature- and field-dependent magnetization, and temperature-dependent heat capacity on these single crystals. Using the measured data we infer a transition temperature-composition (𝑇−𝑥) phase diagram for this system to study the evolution of the AFM ordering upon Cu substitution. For 0 ≤ 𝑥 ≤ 0.097, the system remains magnetically ordered at base temperature with 𝑥 ≤ 0.012, showing signs of multiple AFM ordering temperatures. For the higher substitution levels 0.125 ≤ 𝑥 ≤ 0.181, there are no signatures of magnetic ordering, but anomalous features in resistance and heat capacity data are observed which are consistent with the Kondo effect in this system. The intermediate 𝑥 = 0.105 sample lies between the magnetic ordered and the Kondo regime and is in the vicinity of the AFM quantum critical point (QCP). Thus, La 2⁢ (Cu 𝑥 ⁢Ni 1−𝑥 ) 7 is an example of a small moment system that can be tuned through a QCP. Given these data combined with the fact that the La 2⁢ Ni 7 structure has kagomelike, Ni sublattices running perpendicular to the crystallographic 𝑐 axis, and a predicted 3⁢𝑑-electron flat band that contributes to the density of states near the Fermi energy, La 2 ⁢(Cu 𝑥 ⁢Ni 1−𝑥 ) 7 becomes a promising system to host and study exotic physics.

Das, Atreyee [Ames Laboratory, and Iowa State Univ↗

DOE OSTI2022

A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab

A quench detection system was developed for protecting and monitoring the superconducting solenoids for the Muon-to-Electron Conversion Experiment (Mu2e) at Fermilab. The quench system was designed for a high level of dependability and long-term continuous operation. It is based on three tiers: Tier-I, FPGA-based Digital Quench Detection (DQD); Tier-II, Analog Quench Detection (AQD); and Tier-3, the quench controls and data management system. The Tier-I and Tier-II are completely independent and fully redundant systems. The Tier-3 system is based on National Instruments (NI) C-RIO and provides the user interface for quench controls and data management. It is independent from Tiers I & II. The DQD provides both quench detection and quench characterization (monitoring) capability. Both DQD and AQD have built-in high voltage isolation and user programmable gains and attenuations. The DQD and AQD also includes user configured current dependent thresholding and validation times. A 1 st article of the three-tier system was fully implemented on the new Fermilab magnet test stand for the HL-LHC Accelerator Up-grade Project (AUP). It successfully provided quench protection and monitoring (QPM) for a cold superconducting bus test in November 2020. The Mu2e quench detection design has since been implemented for production testing of the AUP magnets. A detailed description of the system along with results from the AUP superconducting bus test will be presented.

monitoring↗

DOE OSTI2022

Exchange bias and interface-related effects in two-dimensional van der Waals magnetic heterostructures: Open questions and perspectives

The exchange bias (EB) effect is known as a fundamentally and technologically important magnetic property of a magnetic bilayer film. It is manifested as a horizontal shift in a magnetic hysteresis loop of a film subject to cooling in the presence of a magnetic field. The EB effect in van der Waals (vdW) heterostructures offers a novel approach for tuning the magnetic properties of the newly discovered single-layer magnets, as well as adds a new impetus to magnetic vdW heterostructures. Indeed, intriguing EB effects have recently been reported in a variety of low-dimensional vdW magnetic systems ranging from a weakly interlayer-coupled vdW magnet (e.g., Fe 3 GeTe 2 ) to a bilayer composed of two different magnetic vdW materials (e.g., Fe 3 GeTe 2 /CrCl 3 , Fe 3 GeTe 2 /FePS 3 , Fe 3 GeTe 2 /MnPS 3 , Fe 3 GeTe 2 /CrSe, Fe 3 GeTe 2 /CrOCl, Fe 3 GeTe 2 /CoPc, Fe 5 GeTe 2 /FePS 3 ), to bilayers of two different vdW defective magnets (e.g., VSe 2 /MoS 2 ), or to metallic ferromagnet/vdW defective magnet interfaces (e.g., Fe/MoS 2 ). Despite their huge potential in spintronic device applications, the physical origins of the observed EB effects have remained elusive to researchers. Here, we present here a critical review of the EB effect and associated phenomena such as magnetic proximity (MP) in various vdW heterostructure systems and propose approaches to addressing some of the emerging fundamental questions.

2D magnets↗

DOE OSTI2024

Understanding and Tuning Magnetism in Layered Ising‐Type Antiferromagnet FePSe 3 for Potential 2D Magnet

Abstract Recent developments in 2D magnetic materials have motivated the search for new van der Waals magnetic materials, especially Ising‐type magnets with strong magnetic anisotropy. Fe‐based M P X 3 ( M = transition metal, X = chalcogen) compounds such as FePS 3 and FePSe 3 both exhibit an Ising‐type magnetic order, but FePSe 3 receives much less attention compared to FePS 3 . This work focuses on establishing the strategy to engineer magnetic anisotropy and exchange interactions in this less‐explored compound. Through chalcogen and metal substitutions, the magnetic anisotropy is found to be immune against S substitution for Se whereas tunable only with heavy Mn substitution for Fe. In particular, Mn substitution leads to a continuous rotation of magnetic moments from the out‐of‐plane direction toward the in‐plane. Furthermore, the magnetic ordering temperature displays non‐monotonic doping dependence for both chalcogen and metal substitutions but due to different mechanisms. These findings provide deeper insight into the Ising‐type magnetism in this important van der Waals material, shedding light on the study of other Ising‐type magnetic systems as well as discovering novel 2D magnets for potential applications in spintronics.

2D magnet↗

DOE OSTI2022

Designing Magnetism in High Entropy Oxides

Abstract In magnetic systems, spin and exchange disorder can provide access to quantum criticality, frustration, and spin dynamics, but broad tunability of these responses and a deeper understanding of strong limit disorder are lacking. Here, it is demonstrated that high entropy oxides present a previously unexplored route to designing materials in which the presence of strong local compositional disorder may be exploited to generate tunable magnetic behaviors—from macroscopically ordered states to frustration‐driven dynamic spin interactions. Single‐crystal La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 films are used as a model system hosting a magnetic sublattice with a high degree of microstate disorder in the form of site‐to‐site spin and exchange type inhomogeneity. A classical Heisenberg model simplified to represent the highest probability microstates well describes how compositionally disordered systems can paradoxically host magnetic uniformity and demonstrates a path toward continuous control over ordering types and critical temperatures. Model‐predicted materials are synthesized and found to possess an incipient quantum critical point when magnetic ordering types are designed to be in direct competition, this leads to highly controllable exchange bias behaviors previously accessible only in intentionally designed bilayer heterojunctions.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Terrace‐Edge‐Induced Domain Nucleation in Room‐Temperature 2D Magnetic Van Der Waals Heterostructures

Abstract Terrace‐edges, which are step‐like height discontinuities formed during layer stacking or exfoliation, can locally modify magnetic characteristics. Magnetic domain behavior and its structural dependence in a 2D van der Waals (vdW) heterostructure composed of two distinct room‐temperature ferromagnets: Fe 3 GaTe 2 , an intrinsic vdW ferromagnet, and vanadium‐doped WSe 2 , a transition metal dichalcogenide exhibiting defect‐induced magnetism, is investigated. Using magnetic transmission X‐ray microscopy, the formation and annihilation of magnetic domains are directly observed and it is found that domains preferentially form at terrace‐edges of the heterostructure. Micromagnetic simulations reveal that in‐plane magnetization tilting near the terrace‐edge results in a localized maximum in total magnetic energy that promotes domain formation. The findings highlight the significant role of structural edge features and interfacial magnetic interactions in determining domain formation in hybrid 2D vdW magnetic systems, offering a new route to spatially controlled magnetization at room temperature.

Lee, Jieun↗

DOE OSTI2023

Topological nodal point superconductivity in checkerboard magnet-superconductor hybrid systems

Here, we demonstrate that checkerboard magnet-superconductor hybrid (MSH) systems possess a rich phase diagram exhibiting both strong topological superconducting (STSC) and topological nodal point superconducting (TNPSC) phases. We show that TNPSC phases exist both for ferromagnetic and antiferromagnetic systems, yielding a plethora of qualitatively different edge mode structures. Checkerboard MSH systems also facilitate the emergence of STSC phases, which can be induced even in the limit of vanishing magnetization. Our results provide a new path for the quantum engineering of topological superconducting phases using atomic manipulation techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Extraordinary Magnetic Response of an Anisotropic 2D Antiferromagnet via Site Dilution

A prominent characteristic of 2D magnetic systems is the enhanced spin fluctuations, which reduce the ordering temperature. We report that a magnetic field of only 1000th of the Heisenberg superexchange interaction can induce a crossover, which for practical purposes is the effective ordering transition, at temperatures about 6 times the Néel transition in a site-diluted two-dimensional anisotropic quantum antiferromagnet. Such a strong magnetic response is enabled because the system directly enters the antiferromagnetically ordered state from the isotropic disordered state, skipping the intermediate anisotropic stage. The underlying mechanism is achieved on a pseudospin-half square lattice realized in the [(SrIrO3)1/(SrTiO3)2] superlattice thin film that is designed to linearly couple the staggered magnetization to external magnetic fields by virtue of the rotational symmetry-preserving Dzyaloshinskii–Moriya interaction. Furthermore, our model analysis shows that the skipping of the anisotropic regime despite finite anisotropy is due to the enhanced isotropic fluctuations under moderate dilution.

2D antiferromagnet↗

DOE OSTI2021

Field-Tunable Interactions and Frustration in Underlayer-Mediated Artificial Spin Ice

We report that artificial spin ice systems have opened experimental windows into a range of model magnetic systems through the control of interactions among nanomagnet moments. This control has previously been enabled by altering the nanomagnet size and the geometry of their placement. Here we demonstrate that the interactions in artificial spin ice can be further controlled by including a soft ferromagnetic underlayer below the moments. Such a substrate also breaks the symmetry in the array when magnetized, introducing a directional component to the correlations. Using spatially resolved magneto-optical Kerr effect microscopy to image the demagnetized ground states, we show that the correlation of the demagnetized states depends on the direction of the underlayer magnetization. Further, the relative interaction strength of nearest and next-nearest neighbors varies significantly with the array geometry. We exploit this feature to induce frustration in an inherently unfrustrated square lattice geometry, demonstrating new possibilities for effective geometries in two-dimensional nanomagnetic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Spin disorder control of topological spin texture

Abstract Stabilization of topological spin textures in layered magnets has the potential to drive the development of advanced low-dimensional spintronics devices. However, achieving reliable and flexible manipulation of the topological spin textures beyond skyrmion in a two-dimensional magnet system remains challenging. Here, we demonstrate the introduction of magnetic iron atoms between the van der Waals gap of a layered magnet, Fe 3 GaTe 2 , to modify local anisotropic magnetic interactions. Consequently, we present direct observations of the order-disorder skyrmion lattices transition. In addition, non-trivial topological solitons, such as skyrmioniums and skyrmion bags, are realized at room temperature. Our work highlights the influence of random spin control of non-trivial topological spin textures.

36 MATERIALS SCIENCE↗