Search NASA⌕ Search

SEARCH · Search NASA

Results for “many electron systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Assessing Implicit and Explicit Polarizable Solvation Models for Nuclear–Electronic Orbital Systems: Quantum Proton Polarization and Solvation Energetics

Accurate simulations of many chemical processes require the inclusion of both nuclear quantum effects and a solvent environment. The nuclear–electronic orbital (NEO) approach, which treats electrons and select nuclei quantum mechanically on the same level, combined with a polarizable continuum model (PCM) for the solvent environment, addresses this challenge in a computationally practical manner. In this work, the NEO-PCM approach is extended beyond the IEF-PCM (integral equation formalism PCM) and C-PCM (conductor PCM) approaches to the SS(V)PE (surface and simulation of volume polarization for electrostatics) and ddCOSMO (domain decomposed conductor-like screening model) approaches. IEF-PCM, SS(V)PE, C-PCM, and ddCOSMO all exhibit similar solvation energies as well as comparable nuclear polarization within the NEO framework. The calculations show that the nuclear density does not leak out of the molecular cavity because it is much more localized than the electronic density. Finally, the polarization of quantized protons is analyzed in both continuum solvent and explicit solvent environments described by the polarizable MB-pol model, illustrating the impact of specific hydrogen-bonding interactions captured only by explicit solvation. Furthermore, these calculations highlight the relationship among solvation formalism, nuclear polarization, and energetics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Density-functional theory of material design: fundamentals and applications-I

This article is part-I of a review of density-functional theory (DFT) that is the most widely used method for calculating electronic structure of materials. The accuracy and ease of numerical implementation of DFT methods has resulted in its extensive use for materials design and discovery and has thus ushered in the new field of computational material science. In this article, we start with an introduction to Schrödinger equation and methods of its solutions. After presenting exact results for some well-known systems, difficulties encountered in solving the equation for interacting electrons are described. How these difficulties are handled using the variational principle for the energy to obtain approximate solutions of the Schrödinger equation is discussed. The resulting Hartree and Hartree–Fock theories are presented along with results they give for atomic and solid-state systems. We then describe Thomas–Fermi theory and its extensions which were the initial attempts to formulate many-electron problem in terms of electronic density of a system. Having described these theories, we introduce modern DFT by discussing Hohenberg–Kohn theorems that form its foundations. We then go on to discuss Kohn–Sham (KS) formulation of DFT in its exact form. Next, local density approximation (LDA) is introduced and solutions of KS equation for some representative systems, obtained using the LDA, are presented. We end part-I of the review describing the contents of part-II.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of local hybrid density functionals to treat self-interaction error and many-electron effects

The goal of this project was to improve density functional theory (DFT) for systems where conventional semilocal approximations are limited by self-interaction error (SIE) and by near-degeneracy or strong many-electron effects. While DFT remains the only broadly practical first-principles framework for large-scale materials simulations, its predictive accuracy is often challenged in situations involving stretched bonds, charge transfer, transition-metal chemistry, magnetic couplings, band gaps, and correlated electronic states. This project addressed these limitations by developing physically grounded and numerically robust exchange–correlation functionals that retain the efficiency of modern DFT while extending its predictive scope.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Extracting doubly excited state lifetimes in helium directly in the time domain with attosecond noncollinear four-wave-mixing spectroscopy

The helium atom, with one nucleus and two electrons, is a prototypical system to study quantum many-body dynamics. Doubly excited states, or quantum states in which both electrons are excited by one photon, showcase electronic-correlation mediated effects. In this paper, the natural lifetimes of the doubly excited 1 P o 2 s n p Rydberg series and the 1 S e 2 p 2 dark state in helium in the 60–65 eV region are measured directly in the time domain with extreme-ultraviolet/near-infrared noncollinear attosecond four-wave-mixing (FWM) spectroscopy. The measured lifetimes agree with lifetimes deduced from spectral linewidths and theoretical predictions, and the roles of specific decay mechanisms are considered. While complex spectral line shapes in the form of Fano resonances are common in absorption spectroscopy of autoionizing states, the background-free and thus homodyned character of noncollinear FWM results exclusively in Lorentzian spectral features in the absence of strong-field effects. The onset of strong-field effects that would affect the extraction of accurate natural lifetimes in helium by FWM is determined to be approximately 0.3 Rabi cycles. This study provides a systematic understanding of the FWM parameters necessary to enable accurate lifetime extractions, which can be utilized in more complex quantum systems in the future. Published by the American Physical Society 2024

Rupprecht, Patrick (ORCID:000000026491793X)↗
DOE OSTI2021

Neural network representation of electronic structure from ab initio molecular dynamics

Despite their rich information content, electronic structure data amassed at high volumes in ab initio molecular dynamics simulations are generally under-utilized. Here we introduce a transferable high-fidelity neural network representation of such data in the form of tight-binding Hamiltonians for crystalline materials. This predictive representation of ab initio electronic structure, combined with machine-learning boosted molecular dynamics, enables efficient and accurate electronic evolution and sampling. When it is applied to a one-dimension charge-density wave material, carbyne, we are able to compute the spectral function and optical conductivity in the canonical ensemble. The spectral functions evaluated during soliton-antisoliton pair annihilation process reveal significant renormalization of low-energy edge modes due to retarded electron-lattice coupling beyond the Born–Oppenheimer limit. The availability of an efficient and reusable surrogate model for the electronic structure dynamical system will enable calculating many interesting physical properties, paving the way to previously inaccessible or challenging avenues in materials modeling.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2000

Electronics Demonstrated for Low- Temperature Operation

The operation of electronic systems at cryogenic temperatures is anticipated for many NASA spacecraft, such as planetary explorers and deep space probes. For example, an unheated interplanetary probe launched to explore the rings of Saturn would experience an average temperature near Saturn of about 183 C. Electronics capable of low-temperature operation in the harsh deep space environment also would help improve circuit performance, increase system efficiency, and reduce payload development and launch costs. An ongoing research and development program on low-temperature electronics at the NASA Glenn Research Center at Lewis Field is focusing on the design of efficient power systems that can survive and exploit the advantages of low-temperature environments. The targeted systems, which are mission driven, include converters, inverters, controls, digital circuits, and special-purpose circuits. Initial development efforts successfully demonstrated the low-temperature operation and cold-restart of several direct-current/direct-current (dc/dc) converters based on different types of circuit design, some with superconducting inductors. The table lists some of these dc/dc converters with their properties, and the photograph shows a high-voltage, high-power dc/dc converter designed for an ion propulsion system for low-temperature operation. The development efforts of advanced electronic systems and the supporting technologies for low-temperature operation are being carried out in-house and through collaboration with other Government agencies, industry, and academia. The Low Temperature Electronics Program supports missions and development programs at NASA s Jet Propulsion Laboratory and Goddard Space Flight Center. The developed technologies will be transferred to commercial end users for applications such as satellite infrared sensors and medical diagnostic equipment.

Patterson, Richard L.↗
NASA NTRS2000

Development of Electronics for Low Temperature Space Missions

The operation of electronic systems at cryogenic temperatures is anticipated for many future NASA space missions such as deep space probes and planetary surface exploration. For example, an unheated interplanetary probe launched to explore the rings of Saturn would reach an average temperature near Saturn of about -183 C. In addition to surviving the deep space harsh environment, electronics capable of low temperature operation would contribute to improving circuit performance, increasing system efficiency, and reducing payload development and launch costs. Terrestrial applications where components and systems must operate in low temperature environments include cryogenic instrumentation, superconducting magnetic energy storage, magnetic levitation transportation system, and arctic exploration. An on-going research and development program on low temperature electronics at the NASA Glenn Research Center focuses on the development of efficient power systems capable of surviving and exploiting the advantages of low temperature environments. Inhouse efforts include the design, fabrication, and characterization of low temperature power systems and the development of supporting technologies for low temperature operations, such as dielectric and insulating materials, semiconductor devices, passive power components, opto-electronic devices, as well as packaging and integration of the developed components into prototype flight hardware.

Patterson, Richard L.↗
NASA NTRS2003

A Program to Detect and Characterize Extra-Solar Giant Planets

We initiated a significant hardware upgrade to the AFOE, to increase its efficiency for precise radial velocity studies to the level where we can continue to contribute usefully to extrasolar planet research on relatively bright stars. The AFOE, at a 1.5-m telescope, will of course not have the sensitivity of radial velocity instruments at larger telescopes, such as the HIRES on Keck or the Hectochelle on the MMT telescope (about to come on line). However, it has been possible to increase its efficiency for precise radial velocity studies by a factor of 4 to 5, which-combined with the large amount of telescope time available at the 1.5-m telescope-will permit us to do intensive follow-up observations of stars brighter than about 8 magnitude. The AFOE was originally designed primarily for asteroseismology using a ThAr reference. This provided useful wavelength stability over tens of minutes as required for asteroseismology, but we were unable to get a long-term (month-to-month) velocity precision better than about 15 m/s with that setup. Hence, we implemented an iodine cell as a wavelength reference for extrasolar planet studies. However, the optical design of the original AFOE did not completely span the wavelength range covered by the iodine absorption spectrum, and furthermore the optics suffered significant light loss through optical obscuration in the camera secondary. To remedy this, we replaced the AFOE grating with a new one that covered the entire iodine spectral range at somewhat lower spectral resolution, and replaced the camera with a transmitting lens. (The use of a lens was made possible by restricting the spectral range covered by the upgraded AFOE to only the iodine region.) These upgrades were successfully completed, and the instrument was tested for three nights in fall of 2002. The expected improvement in sensitivity by a factor of 4 to 5 was observed: that is, the same velocity precision as previously attained (of order 5 to 7 m/s) was now obtained on a stars that are about 4 to 5 times fainter. Unfortunately, just after installing the new AFOE optics, there was a catastrophic failure of the old Tektronix CCD. A careful investigation was made, and it was determined that the failure was probably due to too many thermal cyclings over the previous 8 years. The only solution was to purchase a new CCD. Internal funds of $16,000 were found for this purpose, and the new CCD (a thinned, back-illuminated Marconi 2K x 2K device with 13.5 micron pixels, and employing dual readout channels to keep the readout time as short as 20 seconds) was ordered, has now arrived, and is currently under test before 1 being installed in the AFOE liquid nitrogen dewar. At the same time, we expect to implement new CCD control electronics. This system should be better in many ways than the previous detector (including eliminating the need for UV flashing to maximize the quantum efficiency). We plan to install the detector on the telescope and begin operations again in April of this year.

Lindstrom, David↗
DOE OSTI2026

Revealing ultrafast proton-transfer-mediated autoionization as a source of low-energy electrons in hydrogen-bonded systems

Ionizing radiation can trigger ultrafast proton transfer, a central mechanism in many chemical and biological functions, that in turn can enable or suppress electron relaxation processes and consequently cause abrupt changes in the reaction pathway. This study combines theory and experiment to probe ultrafast relaxation and dissociation in water dimers following inner- and outer-valence photoionization. By tracking electron and nuclear motion simultaneously, we reveal competing fragmentation pathways that produce low-energy electrons, which are key agents in radiation-induced chemistry, including DNA damage. While low-energy electrons are known to arise via intermolecular Coulombic decay, here we identify a faster relaxation mechanism gated by proton transfer following inner-valence ionization, which we call proton-transfer-mediated autoionization. Occurring within 10 femtoseconds, this process alters fragmentation outcomes, yielding either D 3 O + + OD + or D 2 O + + D 2 O + , depending on the interplay of proton migration and hydrogen back-transfer. Our findings underscore the intricate coupling between electronic and nuclear dynamics in hydrogen-bonded systems and establish proton-transfer-mediated autoionization as a significant pathway for low-energy electron generation.

Atomic and molecular interactions with photons↗
DOE OSTI2022

Anomalous phase separation in a correlated electron system: Machine-learning–enabled large-scale kinetic Monte Carlo simulations

Significance Phase separation is crucial to the functionalities of many correlated electron materials with notable examples including colossal magnetoresistance in manganites and high- T c superconductivity in cuprates. However, the nonequilibrium phase-separation dynamics in such systems are poorly understood theoretically, partly because the required multiscale modeling is computationally very demanding. With the aid of machine-learning methods, we have achieved large-scale dynamical simulations in a representative correlated electron system. We observe an unusual relaxation process that is beyond the framework of classical phase-ordering theories. We also uncover a correlation-induced freezing behavior, which could be a generic feature of phase separation in correlated electron systems.

Zhang, Sheng↗
DOE OSTI2022

Relaxation mechanisms in a disordered system with Poisson-level statistics

Here we discuss the interplay between many-body localization and spin symmetry. To this end, we study the time evolution of several observables in the anisotropic t- j model. Like the Hubbard chain, the studied model contains charge and spin degrees of freedom, yet it has smaller Hilbert space and thus allows for numerical studies of larger systems. We compare the field disorder that breaks the $\mathbb{Z}_2$ spin symmetry and a potential disorder that preserves the latter symmetry. In the former case, sufficiently strong disorder leads to localization of all studied observables, at least for the studied system sizes. However, in the case of symmetry-preserving disorder, we observe that odd operators under the $\mathbb{Z}_2$ spin transformation relax towards the equilibrium value at relatively short timescales that grow only polynomially with the disorder strength. On the other hand, the dynamics of even operators and the level statistics within each symmetry sector are consistent with localization. Our results indicate that localization exists within each symmetry sector for symmetry-preserving disorder. Odd operators' apparent relaxation is due to their time evolution between distinct symmetry sectors.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Evaluation of COTS Electronic Parts for Extreme Temperature Use in NASA Missions

Electronic systems capable of extreme temperature operation are required for many future NASA space exploration missions where it is desirable to have smaller, lighter, and less expensive spacecraft and probes. Presently, spacecraft on-board electronics are maintained at about room temperature by use of thermal control systems. An Extreme Temperature Electronics Program at the NASA Glenn Research Center focuses on development of electronics suitable for space exploration missions. The effects of exposure to extreme temperatures and thermal cycling are being investigated for commercial-off-the-shelf components as well as for components specially developed for harsh environments. An overview of this program along with selected data is presented.

Patterson, Richard L.↗
DOE OSTI2021

Parallel transport dynamics for mixed quantum states with applications to time-dependent density functional theory

Direct simulation of the von Neumann dynamics for a general (pure or mixed) quantum state can often be expensive. One prominent example is the real-time time-dependent density functional theory (rt-TDDFT), a widely used framework for the first principle description of many-electron dynamics in chemical and materials systems. Practical rt-TDDFT calculations often avoid the direct simulation of the von Neumann equation, and solve instead a set of Schrödinger equations, of which the dynamics is equivalent to that of the von Neumann equation. However, the time step size employed by the Schrödinger dynamics is often much smaller. Here, in order to improve the time step size and the overall efficiency of the simulation, we generalize a recent work of the parallel transport (PT) dynamics for simulating pure states [An, Lin, Multiscale Model. Simul. 18, 612, 2020] to general quantum states. The PT dynamics provides the optimal gauge choice, and can employ a time step size comparable to that of the von Neumann dynamics. Going beyond the linear and near adiabatic regime in previous studies, we find that the error of the PT dynamics can be bounded by certain commutators between Hamiltonians, density matrices, and their derived quantities. Such a commutator structure is not present in the Schrödinger dynamics. We demonstrate that the parallel transport-implicit midpoint (PT-IM) method is a suitable method for simulating the PT dynamics, especially when the spectral radius of the Hamiltonian is large. The commutator structure of the error bound, and numerical results for model rt-TDDFT calculations in both linear and nonlinear regimes, confirm the advantage of the PT dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Direct Measurement of Terahertz Conductivity in a Gated Monolayer Semiconductor

Two-dimensional semiconductors and their moiré superlattices have emerged as important platforms for investigating correlated electrons. However, many key properties of these systems, such as the frequency-dependent conductivity, remain experimentally inaccessible because of the mesoscopic sample size. Here we report a technique to directly measure the complex conductivity of electrostatically gated two-dimensional semiconductors in the terahertz frequency range. Applying this technique to a WSe2 monolayer encapsulated in hBN, we observe a clear Drude-like response between 0.1 and 1 THz, in a density range challenging to access even in DC transport. Our work opens a new avenue for studying tunable van der Waals heterostructures using terahertz spectroscopy.

2D semiconductors↗
DOE OSTI2024

Erratum: “Breaking covalent bonds in the context of the many-body expansion (MBE). I. The purported ‘first row anomaly’ in XH n (X = C, Si, Ge, Sn; n = 1–4)” [J. Chem. Phys. 156, 244303 (2022)]

We have noted typographical errors in TABLE V of J. Chem. Phys. 156, 244303 (2022). Specifically, the values of the angles φ HχH for the XH 2 species in both the ( 3 B 1 ) and ( 1 A 1 ) states were incorrectly reported as half of the correct values. Additionally, the values of the same angles for the XH 3 and XH 4 species were reported correctly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Honeycomb-Lattice Mott Insulator on Tantalum Disulphide

Effects of electron many-body interactions amplify in an electronic system with a narrow bandwidth opening a way to exotic physics. A narrow band in a two-dimensional (2D) honeycomb lattice is particularly intriguing as combined with Dirac bands and topological properties but the material realization of a strongly interacting honeycomb lattice described by the Kane-Mele-Hubbard model has not been identified. Here we report a novel approach to realize a 2D honeycomb-lattice narrow-band system with strongly interacting 5$\textit{d}$ electrons. Iin this work, we engineer a well-known triangular lattice 2D Mott insulator 1$\textit{T}$ – TaS 2 into a honeycomb lattice utilizing an adsorbate superstructure. Potassium (K) adatoms at an optimum coverage deplete one-third of the unpaired $\textit{d}$ electrons and the remaining electrons form a honeycomb lattice with a very small hopping. Ab initio calculations show extremely narrow $Z_2$ topological bands mimicking the Kane-Mele model. Electron spectroscopy detects an order of magnitude bigger charge gap confirming the substantial electron correlation as confirmed by dynamical mean field theory. It could be the first artificial Mott insulator with a finite spin Chern number.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1974

A constructive model potential method for atomic interactions

A model potential method is presented that can be applied to many electron single centre and two centre systems. The development leads to a Hamiltonian with terms arising from core polarization that depend parametrically upon the positions of the valence electrons. Some of the terms have been introduced empirically in previous studies. Their significance is clarified by an analysis of a similar model in classical electrostatics. The explicit forms of the expectation values of operators at large separations of two atoms given by the model potential method are shown to be equivalent to the exact forms when the assumption is made that the energy level differences of one atom are negligible compared to those of the other.

Bottcher, C.↗
NASA NTRS1977

Breadboard Facility

In the sixties, Chrysler was NASA's prime contractor for the Saturn I and IB test launch vehicles. The company installed and operated at Huntsville what was known as the Saturn I/IB Development Breadboard Facility. "Breadboard," means an array of electrical and electronic equipment for performing a variety of development and test functions. This work gave Chrysler a broad capability in computerized testing to assure quality control in development of solid-state electronic systems. Today that division is manufacturing many products not destined for NASA, most of them being associated with the company's automotive line. A major project is production and quality-control testing of the "lean-burn" engine, one that has a built-in Computer to control emission timing, and allow the engine to run on a leaner mixture of fuel and air. Other environment-related products include vehicle emission analyzers. The newest of the line is an accurate, portable solid state instrument for testing auto exhaust gases. The exhaust analyzers, now being produced for company dealers and for service

Source record↗