Search NASA⌕ Search

SEARCH · Search NASA

Results for “metal separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Diffusion and structural changes in microcircuit interconnections

The interdiffusion of platimum and gold films, a couple utilized in beam lead microcircuits, has been studied for temperatures up to 550 C. Gold-on-platinum couples and separate platimum and gold films 80-450 nm thick, were deposited by electron beam evaporation onto oxidized (111) silicon substrates. Diffusion was monitored by means of spectral reflectance versus wavelength in the band 500-1000 nm. The separate metal films showed good adhesion and stable reflectances (after an initial change) for at least 6 h at diffusion temperatures, in contrast to the couples. Analysis of platinum diffusion through the gold films yielded an activation energy about 38 kcal/g-atom and a pre-exponential factor of the order 0.001 sq cm/sec, values close to those for volume diffusion. The pre-exponential factor especially is dependent upon film deposition conditions.

Nowak, W. B.↗

Fluorine in meteorites

Microanalysis using a resonant nuclear reaction was used to measure F concentrations in USGS standard rocks and 21 meteorites. The F appears to be a moderately depleted element, but there were significant variations within each sample. Measurements on separated metal phases suggest that about 20% of meteoritic F is in the metal or in a phase closely associated with it. Simultaneous measurements of F, Mg, Na, Al and Si in the nonmagnetic fractions of meteorites suggest plagioclase as a F containing phase.

Allen, R. O., Jr.↗

Workshop on Extraterrestrial Materials from Cold and Hot Deserts

The workshop was held July 6-8, 1999 before the Meteoritical Society meeting in Johannesburg, South Africa. The venue was Kwa Maritane Resort in the Pilanesburg Game Reserve. Conveners were Ludolf Schultz (Chair, MPI fur Chemie), Ian Franchi (Open University), Arch Reid (University of Houston), and Mike Zolensky (NASA JSC). Extended abstracts will be published as an LPI Technical Report. In the first session, Marvin discussed three African iron meteorites: Cape of Good Hope, Gibeon, and Hoba. Grady presented a statistical analysis of meteorites from hot and cold deserts. Wasson discussed types of Antarctic iron meteorites. Several presentations characterized populations of meteorites from individual desert areas: Libyan Desert (Weber et al.), Nullarbor Region (Bevan et al.), and Mojave Desert (Kring et al. and Verish et al). Pairing among EET87503-group howardites was discussed by Buchanan et al. Based on 14C terrestrial ages of Allan Hills ordinary chondrites, Bland et al. suggested that ice flow may be the principal sink for Antarctic meteorites. The effects of preterrestrial and terrestrial alteration were considered in the second session. Nakamura et al. and Lipschutz discussed asteroidal metamorphism of carbonaceous chondrites. Zolensky presented evidence for preterrestrial halide and sulfide in meteorites. Crozaz and Wadhwa described terrestrial alteration of Dar al Gani 476. Welten and Nishiizumi discussed terrestrial weathering of chondrites from Frontier Mountain, Antarctica. Most of the third session dealt with terrestrial meteorite ages. Based on 14C-10Be ages, Jull et al. discussed the exponential decay in numbers of meteorites with increased age. Nishiizumi et al. concluded that some Allan Hills meteorites have much older terrestrial ages than any meteorites from Lewis Cliffs. Welten et al. discussed terrestrial ages determined by 41Ca/36CI of metal separates from hot desert meteorites. Based on a comparison with large IDPs, Flynn et al. suggested that polar micrometeorites, lost a water-soluble sulfate phase by terrestrial alteration. Nyquist suggested that Type I cosmic spheres from deep sea sediments and polar ice were derived from carbonaceous chondrite-like asteroidal sources. The final session considered noble gases, cosmic ray effects, and thermoluminescence. Calculations presented by Reedy indicate that cosmic ray-produced nuclides are more likely to be preserved in small objects than in larger objects. Murty and Mohapatra. reported that trapped gas in Dar al Gani 476 includes a Martian atmospheric component. Wieler et al. and Scherer et al. reported noble gas abundances in different types of desert meteorites. Patzer and Schultz discussed the influence of terrestrial weathering on cosmic ray exposure ages of enstatite chondrites. Franchi et al. suggested that it is difficult to discriminate whether differences in gas release profiles of lunar meteorites from hot deserts and returned lunar samples are the result of terrestrial weathering or shock metamorphism. Benoit and Sears surveyed natural and induced thermoluminescence of Antarctic ordinary chondrites. Merchel et al. analyzed Saharan meteorites with short or complex exposure histories.

Buchanan, Paul C.↗

Near-Earth Asteroid Origin for the Farmington Meteorite

We report nitrogen and xenon isotopic signatures in separated metal and non-magnetic phases of a catastrophically degassed L5 chondrite and discuss implications for the collisional event and the impactor. Additional information is contained in the original extended abstract.

Marti, K.↗

Re-Os Systematics and HSE Distribution in Metal from Ochansk (H4) Chondrite

Previous studies of the Re-Os systematics of chondrites have documented considerable variation in the Re/Os ratios of whole rock samples. For some whole rock chondrites, Re-Os systematics display large deviations from the primitive isochron that are considerably larger than deviations in other isotope systems. Possible interpretation of these facts is that the Re-Os system in chondrites is particularly sensitive to post-formation alteration processes, thus providing a useful tool to examine such processes. Significant variations that have been detected in highly siderophile element (HSE) patterns for ordinary chondrites support this conclusion. We report Re-Os isotope data for metal separates from the Ochansk H4 chondrite coupled with abundance data for Ru, Pd, Ir, and Pt, determined in the same samples by isotope dilution. We chose this meteorite mainly because it is an observed fall with minimal signs of weathering, and its low metamorphic grade (H4) and shock stage (S3).

Smoliar, M. I.↗

CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Panel test articles included a metallic separation bolt imbedded in the compression-pad and heat shield materials, resulting in a circular protuberance over a flat plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the non-equilibrium flow field in the facility nozzle, test box, and flow field over test articles, and comparisons with the measured calibration data.

TPS↗

CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Each panel test article included a metallic separation bolt imbedded in Orion compression-pad and heatshield materials, resulting in a circular protuberance over a flat plate. The protuberances produce complex model flowfields, containing shock-shock and shock-boundary layer interactions, and multiple augmented heating regions on the test plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the nonequilibrium flowfield in the facility nozzle, test box, and flowfield over test articles, and comparisons with the measured calibration data.

CFD↗

Low temperature lithium production

A method and electrolysis cell for producing lithium metal at a low temperature. The method includes combining (i) acetonitrile and (ii) a cation bis(trihaloalkylsulfonyl)imide, cation bis(trihalosulfonyl)imidic acid, a cation bis(trihaloalkylsulfonyl)amide, or cation bis(trihaloalkylsulfonyl)amidic acid in a weight ratio of (i) to (ii) about 100:1 to about 5:1 to provide a non-aqueous electrolyte composition. A lithium compound selected from the group consisting of LiOH, Li 2 O and Li 2 CO 3 is dissolved in the electrolyte composition to provide a lithium doped electrolyte composition. Power is applied to the electrolyte composition to form lithium metal on a cathode of an electrolysis cell. The lithium metal separated from the cathode has a purity of at least about 95 wt. %.

Freiderich, John W.↗

Low temperature lithium production

A method and electrolysis cell for producing lithium metal at a low temperature. The method includes combining (i) acetonitrile and (ii) a cation bis(trihaloalkylsulfonyl)imide, cation bis(trihalosulfonyl)imidic acid, a cation bis(trihaloalkylsulfonyl)amide, or cation bis(trihaloalkylsulfonyl)amidic acid in a weight ratio of (i) to (ii) about 100:1 to about 5:1 to provide a non-aqueous electrolyte composition. A lithium compound selected from the group consisting of LiOH, Li2O and Li2CO3 is dissolved in the electrolyte composition to provide a lithium doped electrolyte composition. Power is applied to the electrolyte composition to form lithium metal on a cathode of an electrolysis cell. The lithium metal separated from the cathode has a purity of at least about 95 wt. %.

Freiderich, John W.↗

Fault Detection in the Solvent Extraction Process with Non-traditional Sensors

Solvent extraction is used to separate metals or other complexes into two different immiscible liquids and is an essential component of the PUREX Process. Improvements to the solvent extraction process can directly contribute to an organization’s ability to ensure the purity and recovery of special nuclear materials from spent nuclear fuel. Such improvements can benefit nuclear reprocessing efforts, increase fuel reutilization, and limit the concentration of actinides in nuclear waste repositories.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Charge-Separated and Lewis Paired Metal–Organic Framework for Anion Exchange and CO 2 Chemical Fixation

Charge-separated metal–organic frameworks (MOFs) are a unique class of MOFs that can possess added properties originating from the exposed ionic species. A new charge-separated MOF, namely, UNM-6 synthesized from a tetrahedral borate ligand and Co 2+ cation is reported in this paper. UNM-6 crystalizes into the highly symmetric P43n space group with fourfold interpenetration, despite the stoichiometric imbalance between the B and Co atoms, which also leads to loosely bound NO 3 – anions within the crystal structure. These NO 3 – ions can be quantitatively exchanged with various other anions, leading to Lewis acid (Co 2+ ) and Lewis base (anions) pairs within the pores and potentially cooperative catalytic activities. For example, UNM-6-Br, the MOF after anion exchange with Br – anions, displays high catalytic activity and stability in reactions of CO 2 chemical fixation into cyclic carbonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple chemical method for the separation of rare earth metals

A method is provided for separating mixtures of different rare earth metals using a ligand having a size-sensitive molecular aperture. The present invention meets the needs in the field by providing method of separating and purifying rare earth metals. The object of this invention is to separate and purify rare earth metals, e.g., the more valuable Dy away from Nd, in mixtures containing such metals using a simple chemical process without the need for countercurrent liquid-liquid separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impinging jet separators for liquid metal magnetohydrodynamic power cycles

In many liquid metal MHD power, cycles, it is necessary to separate the phases of a high-speed liquid-gas flow. The usual method is to impinge the jet at a glancing angle against a solid surface. These surface separators achieve good separation of the two phases at a cost of a large velocity loss due to friction at the separator surface. This report deals with attempts to greatly reduce the friction loss by impinging two jets against each other. In the crude impinging jet separators tested to date, friction losses were greatly reduced, but the separation of the two phases was found to be much poorer than that achievable with surface separators. Analyses are presented which show many lines of attack (mainly changes in separator geometry) which should yield much better separation for impinging jet separators).

Bogdanoff, D. W.↗

Selective bacterial separation of critical metals: towards a sustainable method for recycling lithium ion batteries

The large scale recycling of lithium ion batteries (LIBs) is essential to satisfy global demands for the raw materials required to implement this technology as part of a clean energy strategy. However, despite what is rapidly becoming a critical need, an efficient and sustainable recycling process for LIBs has yet to be developed. Biological reactions occur with great selectivity under mild conditions, offering new avenues for the implementation of more environmentally sustainable processes. Here, we demonstrate a sequential process employing two bacterial species to recover Mn, Co and Ni, from vehicular LIBs through the biosynthesis of metallic nanoparticles, whilst Li remains within the leachate. Moreover the feasibility of Mn recovery from polymetallic solutions was demonstrated at semi-pilot scale in a 30 L bioreactor. Additionally, to provide insight into the biological process occurring, we investigated selectivity between Co and Ni using proteomics to identify the biological response and confirm the potential of a bio-based method to separate these two essential metals. Our approach determines the principles and first steps of a practical bio-separation and recovery system, underlining the relevance of harnessing biological specificity for recycling and up-cycling critical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical separation and recovery of metals

The invention provides a novel filtration apparatus for the selective separation of metals from a mixture thereof. The invention also provides a method for the separation and isolation of metals from a sample using electrochemical precipitation.

O'Connor, Megan↗

Adsorption-based membranes for air separation using transition metal oxides

In this work, we use computational modeling to examine the viability of adsorption-based pore-flow membranes for separating gases when a purely size-based separation strategy is ineffective. Using molecular dynamics simulations of O 2 and N 2 , we model permeation through a nanoporous graphene membrane. Permeation is assumed to follow a five-step adsorption-based pathway, with desorption being the rate-limiting step. Using this model, we observe increased selectivity between O 2 and N 2 , resulting from increased adsorption energy differences. We explore the limits of this strategy, providing an initial set of constraints that need to be satisfied to allow for selectivity. Finally, we provide a preliminary exploration of some transition metal oxides that appear to satisfy those conditions. Using density functional theory calculations, we confirm that these oxides possess adsorption energies needed to operate as adsorption-based pore-flow membranes. These adsorption energies provide a suitable motivation to examine adsorption-based pore-flow membranes as a viable option for air separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗