Search NASA⌕ Search

SEARCH · Search NASA

Results for “microcavities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Microtopographical Characterization of Microcavities on X-Rays Sensor Array

A large number of medical imaging methods, such as computed tomography, ultrasound and magnetic resonance imaging, are for quite some time digital. X-ray imaging was kept analogue until recently. Over last half a dozen years' digital radiography systems are being successfully developed. Among other advantages common to other medical imaging methods, digital X-ray imaging allow an important reduction of the X-ray doses involved in different medical diagnosis. The communication herein reports to the microtopographic inspection of laser ablation opened microcavities during development of an X-rays microdetector based on an array of wells filled with scintillator crystals. The wells were obtained by laser ablation of a 500 microns thick aluminum film. X-ray energy is converted to visible light within the crystals and then detected by a photodetector fabricated in a standard CMOS process. Aluminium thick-films were chosen as present good reflectivity in the visible range improving the amount of photons collected at each photodetector. Square wells 100 microns wide and 490 microns deep were targeted. In this communication we will report on the process of optical microtopographic characterization of the aluminium wells. This metrological process was performed in order to optimize the laser ablation system parameter in order to obtain the desired size square wells with almost vertical smooth sidewalls.

36 MATERIALS SCIENCE↗

Strong light-matter coupling in ultrathin double dielectric mirror GaN microcavities

Strong light-matter coupling is demonstrated at low temperature in an ultrathin GaN microcavity fabricated using two silica/zirconia Bragg mirrors, in addition to a three-period epitaxial (Al,Ga)N mirror serving as an etch stop and assuring good quality of the overgrown GaN. The {lambda}/2 cavity is grown by molecular beam epitaxy on a Si substrate. Analysis of angle-resolved data reveal key features of the strong coupling regime in both reflectivity and transmission spectra at 5 K: anticrossing with a normal mode splitting of 43{+-}2 meV and 56{+-}2 meV for reflectivity and transmission, respectively, and narrowing of the lower polariton linewidth near resonance.

36 MATERIALS SCIENCE↗

The plasma transistor: A microcavity plasma device coupled with a low voltage, controllable electron emitter

A microplasma transistor has been realized by injecting electrons into the sheath of a rare gas plasma with a low voltage (|V{sub b}|<25 V), controllable electron emitter. Integrating a solid state emitter with a 500 {mu}m diam. cylindrical microcavity plasma yields a three terminal current-controlled device capable of modulating the conduction current and light intensity generated by the microplasma. For an emitter voltage of V{sub b}=-10 V, the rms charge carried by the conduction current of a Ne microplasma is tripled relative to the value measured for no current injection. Similarly, the wavelength-integrated visible emission is increased by 2.7 and 4 dB for V{sub b}=-5 and -25 V, respectively. From the continuity equation for charged particle flux in the sheath, the electron density at the edge of the sheath is determined to be n{sub s}=(3{+-}1)x10{sup 12} cm{sup -3} for an electron temperature in the 1-5 eV range. Energizing the electron emitter is estimated to reduce the ratio of the ion to electron number densities at the cathode surface from 25 to 14. A parameter {beta}{sub p}, defined as the microplasma transistor conductance normalized to that for the conventional plasma device (i.e., V{sub b}=0), is introduced and found to be {approx}40 for this unoptimized device when |V{sub b}|=5 V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lasing and polariton condensation: Two distinct transitions in GaAs microcavities with stress traps

We have used stress to create a harmonic potential for polaritons in GaAs microcavities and have previously reported that the polaritons undergo spontaneous coherence in the trap. In this paper we present results for both trapped conditions and resonant, nontrapped conditions in the same sample. We find that the results are qualitatively different with two distinct types of transitions. At low density in the trap, the polaritons remain in the strong coupling regime while going through the threshold for onset of coherence; at higher density, there is a different threshold behavior, which occurs with weak coupling and can be identified with lasing; this transition occurs both with and without a trap. The transition at lower density can therefore be identified as a type of nonequilibrium Bose-Einstein condensation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature plasma enhanced chemical vapor deposition of thin films combining mechanical stiffness, electrical insulation, and homogeneity in microcavities

The deposition of hydrogenated amorphous carbon (a-C:H) as well as hydrogenated amorphous silicon carbonitride (SiCN:H) films was investigated in view of a simultaneous realization of a minimum Young's modulus (>70 GPa), a high electrical insulation ({>=}1 MV/cm), a low permittivity and the uniform coverage of microcavities with submillimeter dimensions. For the a-C:H deposition the precursors methane (CH{sub 4}) and acetylene (C{sub 2}H{sub 2}) were used, while SiCN:H films were deposited from mixtures of trimethylsilane [SiH(CH{sub 3}){sub 3}] with nitrogen and argon. To realize the deposition of micrometer thick films with the aforementioned complex requirements at substrate temperatures {<=}200 deg. C, several plasma enhanced chemical vapor deposition methods were investigated: the capacitively coupled rf discharge and the microwave electron cyclotron resonance (ECR) plasma, combined with two types of pulsed substrate bias. SiCN:H films deposited at about 1 Pa from ECR plasmas with pulsed high-voltage bias best met the requirements. Pulsed biasing with pulse periods of about 1 {mu}s and amplitudes of about -2 kV was found to be most advantageous for the conformal low temperature coating of the microtrenches, thereby ensuring the required mechanical and insulating film properties.

36 MATERIALS SCIENCE↗

Monolithic single GaN nanowire laser with photonic crystal microcavity on silicon

Optically pumped lasing at room temperature in a silicon based monolithic single GaN nanowire with a two-dimensional photonic crystal microcavity is demonstrated. Catalyst-free nanowires with low density ({approx}10{sup 8} cm{sup -2}) are grown on Si by plasma-assisted molecular beam epitaxy. High resolution transmission electron microscopy images reveal that the nanowires are of wurtzite structure and they have no observable defects. A single nanowire laser fabricated on Si is characterized by a lasing transition at {lambda}=371.3 nm with a linewidth of 0.55 nm. The threshold is observed at a pump power density of {approx}120 kW/cm{sup 2} and the spontaneous emission factor {beta} is estimated to be 0.08.

74 ATOMIC AND MOLECULAR PHYSICS↗

MoO3 as combined hole injection layer and tapered spacer in combinatorial multicolor microcavity organic light emitting diodes

Multicolor microcavity ({mu}C) organic light-emitting diode (OLED) arrays were fabricated simply by controlling the hole injection and spacer MoO{sub 3} layer thickness. The normal emission was tunable from {approx}490 to 640 nm and can be further expanded. A compact, integrated spectrometer with two-dimensional combinatorial arrays of {mu}C OLEDs was realized. The MoO{sub 3} yields more efficient and stable devices, revealing a new breakdown mechanism. The pixel current density reaches {approx}4 A/cm{sup 2} and a maximal normal brightness {approx}140 000 Cd/m{sup 2}, which improves photoluminescence-based sensing and absorption measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and optical properties of non-polar III-nitride air-gap distributed Bragg reflector microcavities

Using the thermal decomposition technique, non-polar III-nitride air-gap distributed Bragg reflector (DBR) microcavities (MCs) with a single quantum well have been fabricated. Atomic force microscopy reveals a locally smooth DBR surface, and room-temperature micro-photoluminescence measurements show cavity modes. There are two modes per cavity due to optical birefringence in the non-polar MCs, and a systematic cavity mode shift with cavity thickness was also observed. Although the structures consist of only 3 periods (top) and 4 periods (bottom), a quality factor of 1600 (very close to the theoretical value of 2100) reveals the high quality of the air-gap DBR MCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Q-factor of (In,Ga)N containing III-nitride microcavity grown by multiple deposition techniques

A 3λ/2 (In,Ga)N/GaN resonant cavity, designed for ∼415 nm operation, is grown by molecular beam epitaxy and is sandwiched between a 39.5-period (In,Al)N/GaN distributed Bragg reflector (DBR), grown on c-plane GaN-on-sapphire pseudo-substrate by metal-organic vapor phase epitaxy and an 8-period SiO{sub 2}/ZrO{sub 2} DBR, deposited by electron beam evaporation. Optical characterization reveals an improvement in the cavity emission spectral purity of approximately one order of magnitude due to resonance effects. The combination of spectrophotometric and micro-reflectivity measurements confirms the strong quality (Q)-factor dependence on the excitation spot size. We derive simple analytical formulas to estimate leak and residual absorption losses and propose a simple approach to model the Q-factor and to give a quantitative estimation of the weight of cavity disorder. The model is in good agreement with both transfer-matrix simulation and the experimental findings. We point out that the realization of high Q-factor (In,Ga)N containing microcavities on GaN pseudo-substrates is likely to be limited by the cavity disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrically-detected magnetic resonance in semiconductor nanostructures inserted in microcavities

We present the first findings of the new electrically-detected electron spin resonance technique (EDESR), which reveal the point defects in the ultra-narrow silicon quantum wells (Si-QW) confined by the superconductor δ-barriers. This technique allows the ESR identification without application of an external cavity, as well as a high frequency source and recorder, and with measuring the only response of the magnetoresistance caused by the microcavities embedded in the Si-QW plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct and indirect excitons and polaritons in coupled quantum well microcavities

We present an accurate calculation of exciton states in coupled quantum wells (CQWs) in an external electric field. The energies, oscillator strengths, and absorption spectrum of excitons in symmetric AlGaAs CQWs and asymmetric InGaAs CQWs are calculated for different electric fields. It is demonstrated that the ground state of the system switches from direct to indirect exciton with dramatic changes of its binding energy and oscillator strength, the calculated radiative lifetime being in quantitative agreement with a photoluminescence decay measurement in AlGaAs CQWs. At the same time, the brightest excited state represents a direct exciton which is almost unaffected by the external field. We have also applied the developed technique to the calculation of exciton-polariton states in CQW microcavities. In the strong coupling regime, the field dependent reflectivity shows a remarkable polariton anticrossing which is in good agreement with a recent experimental observation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Far off-resonant coupling between photonic crystal microcavity and single quantum dot with resonant excitation

In this paper, we experimentally demonstrate that with sub-nanowatt coherent s-shell excitation of a single InAs quantum dot, off-resonant coupling of 4.1 nm is possible between L3 photonic crystal microcavity and the quantum dot at 50 K. This resonant excitation reduces strongly the effect of surrounding charges to quantum dot, multiexciton complexes and pure dephasing. It seems that this far off-resonant coupling is the result of increased number of acoustical phonons due to high operating temperature of 50 K. The 4.1 nm detuning is the largest amount for this kind of coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrically-detected ESR in silicon nanostructures inserted in microcavities

We present the first findings of the new electrically-detected electron spin resonance technique (EDESR), which reveal the point defects in the ultra-narrow silicon quantum wells (Si-QW) confined by the superconductor δ- barriers. This technique allows the ESR identification without application of an external cavity, as well as a high frequency source and recorder, and with measuring the only response of the magnetoresistance, with internal GHz Josephson emission within frameworks of the normal-mode coupling (NMC) caused by the microcavities embedded in the Si-QW plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ring-shaped polariton lasing in pillar microcavities

Optically generated exciton-polaritons in cylindric semiconductor pillar microcavity with embedded GaAs/AlGaAs quantum wells demonstrate a clear polariton lasing regime. When exciting in the center of the pillar, we detect a ring-shaped emission, where the peak of intensity can be separated from the excitation spot by more than 10 μm. The spatial coherence of the ring emission is verified by interferometry measurements. These observations are interpreted by drift of the exciton polariton condensate away from the excitation spot due to its repulsion from the exciton reservoir and by its spatial confinement by the pillar boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of ultra-high sensitivity configuration in chip-integrated photonic crystal microcavity bio-sensors

We analyze the contributions of quality factor, fill fraction, and group index of chip-integrated resonance microcavity devices, to the detection limit for bulk chemical sensing and the minimum detectable biomolecule concentration in biosensing. We analyze the contributions from analyte absorbance, as well as from temperature and spectral noise. Slow light in two-dimensional photonic crystals provide opportunities for significant reduction of the detection limit below 1 × 10{sup −7} RIU (refractive index unit) which can enable highly sensitive sensors in diverse application areas. We demonstrate experimentally detected concentration of 1 fM (67 fg/ml) for the binding between biotin and avidin, the lowest reported till date.

36 MATERIALS SCIENCE↗

Strong exciton-photon coupling in open semiconductor microcavities

We present a method to implement 3-dimensional polariton confinement with in-situ spectral tuning of the cavity mode. Our tunable microcavity is a hybrid system consisting of a bottom semiconductor distributed Bragg reflector (DBR) with a cavity containing quantum wells (QWs) grown on top and a dielectric concave DBR separated by a micrometer sized gap. Nanopositioners allow independent positioning of the two mirrors and the cavity mode energy can be tuned by controlling the distance between them. When close to resonance, we observe a characteristic anticrossing between the cavity modes and the QW exciton demonstrating strong coupling. For the smallest radii of curvature concave mirrors of 5.6 μm and 7.5 μm, real-space polariton imaging reveals submicron polariton confinement due to the hemispherical cavity geometry.

36 MATERIALS SCIENCE↗

Ultrastrong light-matter coupling in electrically doped microcavity organic light emitting diodes

The coupling of the electromagnetic field with an electronic transition gives rise, for strong enough light-matter interactions, to hybrid states called exciton-polaritons. When the energy exchanged between light and matter becomes a significant fraction of the material transition energy an extreme optical regime called ultrastrong coupling (USC) is achieved. We report a microcavity embedded p-i-n monolithic organic light emitting diode working in USC, employing a thin film of squaraine dye as active layer. A normalized coupling ratio of 30% has been achieved at room temperature. These USC devices exhibit a dispersion-less angle-resolved electroluminescence that can be exploited for the realization of innovative optoelectronic devices. Our results may open the way towards electrically pumped polariton lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗