Search NASA⌕ Search

SEARCH · Search NASA

Results for “modular modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Mathematical Modeling Of Life-Support Systems

Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

Seshan, Panchalam K.↗
NASA NTRS1999

Life Sciences Division Spaceflight Hardware

The Ames Research Center (ARC) is responsible for the development, integration, and operation of non-human life sciences payloads in support of NASA's Gravitational Biology and Ecology (GB&E) program. To help stimulate discussion and interest in the development and application of novel technologies for incorporation within non-human life sciences experiment systems, three hardware system models will be displayed with associated graphics/text explanations. First, an Animal Enclosure Model (AEM) will be shown to communicate the nature and types of constraints physiological researchers must deal with during manned space flight experiments using rodent specimens. Second, a model of the Modular Cultivation System (MCS) under development by ESA will be presented to highlight technologies that may benefit cell-based research, including advanced imaging technologies. Finally, subsystems of the Cell Culture Unit (CCU) in development by ARC will also be shown. A discussion will be provided on candidate technology requirements in the areas of specimen environmental control, biotelemetry, telescience and telerobotics, and in situ analytical techniques and imaging. In addition, an overview of the Center for Gravitational Biology Research facilities will be provided.

Yost, B.↗
NASA NTRS2009

Real-Time Hardware-in-the-Loop Simulation of Ares I Launch Vehicle

The Ares Real-Time Environment for Modeling, Integration, and Simulation (ARTEMIS) has been developed for use by the Ares I launch vehicle System Integration Laboratory at the Marshall Space Flight Center. The primary purpose of the Ares System Integration Laboratory is to test the vehicle avionics hardware and software in a hardware - in-the-loop environment to certify that the integrated system is prepared for flight. ARTEMIS has been designed to be the real-time simulation backbone to stimulate all required Ares components for verification testing. ARTE_VIIS provides high -fidelity dynamics, actuator, and sensor models to simulate an accurate flight trajectory in order to ensure realistic test conditions. ARTEMIS has been designed to take advantage of the advances in underlying computational power now available to support hardware-in-the-loop testing to achieve real-time simulation with unprecedented model fidelity. A modular realtime design relying on a fully distributed computing architecture has been implemented.

Tobbe, Patrick↗
NASA NTRS2015

ODISEES: Ontology-Driven Interactive Search Environment for Earth Sciences

This paper discusses the Ontology-driven Interactive Search Environment for Earth Sciences (ODISEES) project currently being developed to aid researchers attempting to find usable data among an overabundance of closely related data. ODISEES' ontological structure relies on a modular, adaptable concept modeling approach, which allows the domain to be modeled more or less as it is without worrying about terminology or external requirements. In the model, variables are individually assigned semantic content based on the characteristics of the measurements they represent, allowing intuitive discovery and comparison of data without requiring the user to sift through large numbers of data sets and variables to find the desired information.

Rutherford, Matthew T.↗
NASA NTRS2017

Static Wind Tunnel Testing of a Legged Venus Lander

A static wind tunnel test was conducted to determine the static aerodynamic coe cients of the surface lander design proposed by the Venus In-Situ Atmospheric and Geochemical Explorer (VISAGE). The baseline design of the lander consists of a spherical pressure vessel with a top-mounted circular drag plate for aerodynamic deceleration, and three xed landing legs. A modular subscale lander model, which allowed testing of several drag plate and landing leg con gurations, was fabricated using rapid-prototyping techniques. The model was tested with four di erent drag plates and three di erent leg con gurations, at a dynamic pressure of 1610 Pa and Mach number of 0.15. Testing was conducted using legs of varying diameter in order to determine the appropriate scaling of the results to Reynolds numbers representative of terminal descent at Venus. The static aerodynamic force (axial, normal, and side), and moment (rolling, pitching, yawing) coe cients for each lander con guration were determined as a function of model orientation. All model con gurations were found to be statically stable in the range of total angles of attack considered (0 to 30 deg). However, the drag performance and degree of static stability of the model were dependent on the dihedral angle of the circular drag plate. The results will enable the creation of a preliminary aerodatabase for the VISAGE lander concept, and allow the e ect of design changes on aerodynamic performance to be evaluated.

Rabinovitch, Jason↗
NASA NTRSDate not supplied

Evaluation of Precision Landing Performance Using A Generalized Aerospace Simulation in Simulink Framework

NASA’s science and exploration goals to return to the Moon and beyond will need to perform precision landings to place humans and cargo supplies near places of scientific interest, surface resources, or pre-established basecamps. With the maturation of new navigation technology, such as terrain relative navigation, precision landing is now feasible, enabling new exploration sites, such as the lunar poles. However, verification of precision landing performance becomes crucial since not reaching the designated landing site would have a high risk of loss of mission. Therefore, having a high-fidelity simulation platform to evaluate six degrees of freedom vehicle performance during high-risk phases of flight such landing is a fundamental part of the system verification and risk reduction. The NASA Marshall Space Flight Center has developed the GeneraLized Aerospace Simulation in Simulink® (GLASS) tool which incorporates guidance, navigation, and control algorithms, as well as vehicle and environmental models, such as gravity, vehicle mass properties, navigation sensors, propulsion, and terrain models. GLASS uses the MathWorks® Simulink® environment which provides a model-based design framework that allows the incorporation of vehicle models in a modular architecture. The Simulink® environment provides seamless integration with all the MathWorks® capabilities and toolboxes, such as control design toolboxes and Simscape™ Multibody™ dynamics toolbox. The MathWorks® environment also allows for guidance, navigation, and control algorithms to be auto coded in C language, enabling quick software and hardware in the loop testing. This paper provides an overview of GLASS capabilities for analyzing precision landing performance, including navigation trades applied to a NASA human lander reference design architecture.

Guidance↗
NASA NTRS2023

Prototype Global Analysis of LISA Data with Multiple Source Types

The novel data analysis challenges posed by the Laser Interferometer Space Antenna (LISA) arise from the overwhelmingly large number of astrophysical sources in the measurement band and the density with which they are found in the data. Robust detection and characterization of the numerous gravitational wave sources in LISA data can not be done sequentially, but rather through a simultaneous global fit of a data model containing the full suite of astrophysical and instrumental features present in the data. While previous analyses have focused on individual source types in isolation, here we present the first demonstration of a LISA global fit analysis containing combined astrophysical populations. The prototype pipeline uses a blocked Metropolis Hastings algorithm to alternatingly fit to a population of ultra compact galactic binaries, known “verification binaries” already identified by electromagnetic observations, a population of massive black hole mergers, and an instrument noise model. The Global LISA Analysis Software Suite (GLASS) is assembled from independently developed samplers for the different model components. The modular design enables flexibility to future development by defining standard interfaces for adding new, or updating additional, components to the global fit without being overly prescriptive for how those modules must be internally designed. The GLASS pipeline is demonstrated on data simulated for the LISA Data Challenge 2b. Results of the analysis and a road-map for continued development are described in detail.

Gravitational Waves↗
NASA NTRSDate not supplied

Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down

In the absence of external heat exchangers, the on-orbit transfer of cryogenic propellants requires the receiver tank to first be quenched to a sufficiently low energy state to allow for a continuous no-vent fill to avoid unnecessary venting of liquid. One proposed method for tank chilldown that minimizes the potential for venting liquid is the charge hold vent (CHV) method. CHV follows a cyclic process that gradually removes thermal energy from the receiver tank by injecting liquid with the vent valve closed and allowing the fluid and wall to reach near-thermal equilibrium before venting the superheated vapor. However, the CHV method must be optimized to minimize complexity, mass, and time. This paper presents a modular CHV analytical model used to quantify the number of cycles and propellant mass consumed based on first principles. The model is used to examine the effect of eight parameters: receiver tank material, volume, mass, maximum expected operating pressure, and initial pressure, liquid injection pressure and temperature, and the target temperature. The model is validated against the only two available CHV datasets. Based on results, the tank mass-to-volume ratio is the most important factor in determining the number of CHV cycles and thus degree of difficulty in tank chilldown. The model can easily be used for early-stage design, sizing, and analysis of cryogenic propellant transfer systems.

Tank Chilldown↗
NASA NTRSDate not supplied

Parametric Analysis of the Charge-Hold-Vent Method for Cryogenic Propellant Tank Chill Down

Abstract. In the absence of external heat exchangers, the on-orbit transfer of cryogenic propellants requires the receiver tank to first be quenched to a sufficiently low energy state to allow for a continuous no-vent fill to avoid unnecessary venting of liquid. One proposed method for tank chilldown that minimizes the potential for venting liquid is the charge hold vent (CHV) method. CHV follows a cyclic process that gradually removes thermal energy from the receiver tank by injecting liquid with the vent valve closed and allowing the fluid and wall to reach near-thermal equilibrium before venting the superheated vapor. However, the CHV method must be optimized to minimize complexity, mass, and time. This paper presents a modular CHV analytical model used to quantify the number of cycles and propellant mass consumed based on first principles. The model is used to examine the effect of eight parameters: receiver tank material, volume, mass, maximum expected operating pressure, and initial pressure, liquid injection pressure and temperature, and the target temperature. The model is validated against the only two available CHV datasets. Based on results, the tank mass-to-volume ratio is the most important factor in determining the number of CHV cycles and thus degree of difficulty in tank chilldown. The model can easily be used for early-stage design, sizing, and analysis of cryogenic propellant transfer systems. Keywords: tank chilldown, charge-hold-vent, no-vent fill

Tank Chilldown↗
NASA NTRS1995

Software to model AXAF-I image quality

A modular user-friendly computer program for the modeling of grazing-incidence type x-ray optical systems has been developed. This comprehensive computer software GRAZTRACE covers the manipulation of input data, ray tracing with reflectivity and surface deformation effects, convolution with x-ray source shape, and x-ray scattering. The program also includes the capabilities for image analysis, detector scan modeling, and graphical presentation of the results. A number of utilities have been developed to interface the predicted Advanced X-ray Astrophysics Facility-Imaging (AXAF-I) mirror structural and thermal distortions with the ray-trace. This software is written in FORTRAN 77 and runs on a SUN/SPARC station. An interactive command mode version and a batch mode version of the software have been developed.

Ahmad, Anees↗
NASA NTRSDate not supplied

Evaluating Machine Learning Approaches to Plume Tracking

On July 15, 2022, the Hunga Tonga-Hunga Ha’apai (HTHH) submarine volcano erupted, propelling trace gasses and ash through the troposphere and up into the stratosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using imagery from NASA’s Earth Observing System, including MODIS aerosol products and OMI sulfur dioxide products, this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline, establishes a framework for systematically and rapidly studying natural disasters, including additional volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of NASA’s Earth Observation and remote sensing data, this work shows how AI and open science can accelerate research and generate actionable results, even for unprecedented events. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions, and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters in a changing world.

machine learning↗
NASA NTRS1996

Comparative Study of Advanced Turbulence Models for Turbomachinery

A computational study has been undertaken to study the performance of advanced phenomenological turbulence models coded in a modular form to describe incompressible turbulent flow behavior in two dimensional/axisymmetric and three dimensional complex geometry. The models include a variety of two equation models (single and multi-scale k-epsilon models with different near wall treatments) and second moment algebraic and full Reynolds stress closure models. These models were systematically assessed to evaluate their performance in complex flows with rotation, curvature and separation. The models are coded as self contained modules that can be interfaced with a number of flow solvers. These modules are stand alone satellite programs that come with their own formulation, finite-volume discretization scheme, solver and boundary condition implementation. They will take as input (from any generic Navier-Stokes solver) the velocity field, grid (structured H-type grid) and computational domain specification (boundary conditions), and will deliver, depending on the model used, turbulent viscosity, or the components of the Reynolds stress tensor. There are separate 2D/axisymmetric and/or 3D decks for each module considered. The modules are tested using Rocketdyn's proprietary code REACT. The code utilizes an efficient solution procedure to solve Navier-Stokes equations in a non-orthogonal body-fitted coordinate system. The differential equations are discretized over a finite-volume grid using a non-staggered variable arrangement and an efficient solution procedure based on the SIMPLE algorithm for the velocity-pressure coupling is used. The modules developed have been interfaced and tested using finite-volume, pressure-correction CFD solvers which are widely used in the CFD community. Other solvers can also be used to test these modules since they are independently structured with their own discretization scheme and solver methodology. Many of these modules have been independently tested by Professor C.P. Chen and his group at the University of Alabama at Huntsville (UAH) by interfacing them with own flow solver (MAST).

Hadid, Ali H.↗
NASA NTRS1972

Optimum spaceborne computer system design by simulation

A deterministic digital simulation model is described which models the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. Use of the model as a tool in configuring a minimum computer system for a typical mission is demonstrated. The configuration which is developed as a result of studies with the simulator is optimal with respect to the efficient use of computer system resources, i.e., the configuration derived is a minimal one. Other considerations such as increased reliability through the use of standby spares would be taken into account in the definition of a practical system for a given mission.

Williams, T.↗
NASA NTRS2013

GFEChutes Lo-Fi

NASA needed to provide a software model of a parachute system for a manned re-entry vehicle. NASA has parachute codes, e.g., the Descent Simulation System (DSS), that date back to the Apollo Program. Since the space shuttle did not rely on parachutes as its primary descent control mechanism, DSS has not been maintained or incorporated into modern simulation architectures such as Osiris and Antares, which are used for new mission simulations. GFEChutes Lo-Fi is an object-oriented implementation of conventional parachute codes designed for use in modern simulation environments. The GFE (Government Furnished Equipment), low-fidelity (Lo-Fi) parachute model (GFEChutes Lo-Fi) is a software package capable of modeling the effects of multiple parachutes, deployed concurrently and/or sequentially, on a vehicle during the subsonic phase of reentry into planetary atmosphere. The term "low-fidelity" distinguishes models that represent the parachutes as simple forces acting on the vehicle, as opposed to independent aerodynamic bodies. GFEChutes Lo-Fi was created from these existing models to be clean, modular, certified as NASA Class C software, and portable, or "plug and play." The GFE Lo-Fi Chutes Model provides basic modeling capability of a sequential series of parachute activities. Actions include deploying the parachute, changing the reefing on the parachute, and cutting away the parachute. Multiple chutes can be deployed at any given time, but all chutes in that case are assumed to behave as individually isolated chutes; there is no modeling of any interactions between deployed chutes. Drag characteristics of a deployed chute are based on a coefficient of drag, the face area of the chute, and the local dynamic pressure only. The orientation of the chute is approximately modeled for purposes of obtaining torques on the vehicle, but the dynamic state of the chute as a separate entity is not integrated - the treatment is simply an approximation. The innovation in GFEChutes Lo-Fi is to use an object design that closely followed the mechanical characteristics and structure of a physical system of parachutes and their deployment mechanisms. Software objects represent the components of the system, and use of an object hierarchy allows a progression from general component outlines to specific implementations. These extra chutes were not part of the baseline deceleration sequence of drogues and mains, but still had to be simulated. The major innovation in GFEChutes Lo-Fi is the software design and architecture.

Gist, Emily↗
NASA NTRSDate not supplied

Tracking the Hunga Tonga-Hunga Ha’apai Eruption Stratospheric Aerosol and Trace Gas Plumes Using Machine Learning

On January 15, 2022, the Hunga Tonga-Hunga Ha’apai (hereafter, Hunga Tonga) submarine volcano had an explosive eruption that thrusted ash, gases, and water vapor through the troposphere into the stratosphere and mesosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using data retrieved from low earth orbiting satellite instruments (e.g., OMPS, OMI, and CALIPSO), this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), with prompt engineering can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline using NASA Earthdata and Openscapes, establishes a framework for systematically and rapidly studying extreme events, including volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of remote sensing data, this work demonstrates how AI and open science can accelerate research and generate actionable results. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions (e.g., the Atmosphere Observing System (AOS)), and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters and extreme events in a changing world.

David M. Giles↗
NASA NTRS2017

Mars 2020 Site-Specific Mission Performance Analysis: 1. Science exploration and sol type modeling

We developed a scenario-based mission performance model for the Mars 2020 Rover to help identify project-wide productivity and operability challenges and opportunities. We have modeled science exploration combining high-fidelity resource modeling, science strategies, and modular science activity scenarios. This is proving to be an effective way of incorporating science activities into an engineering-based performance model.

Ono, Masahiro↗
NASA NTRS1990

A prototype computer-aided modelling tool for life-support system models

Based on the canonical decomposition of physical-chemical-biological systems, a prototype kernel has been developed to efficiently model alternative life-support systems. It supports (1) the work in an interdisciplinary group through an easy-to-use mostly graphical interface, (2) modularized object-oriented model representation, (3) reuse of models, (4) inheritance of structures from model object to model object, and (5) model data base. The kernel is implemented in Modula-II and presently operates on an IBM PC.

Preisig, H. A.↗