Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Optical polarization measurements of the Jupiter atmosphere at 103 deg phase angle

The first measurements have been made of the linear polarization of sunlight scattered by the Jupiter atmosphere at phase angles greater than 12 deg, using the imaging photopolarimeter on Pioneer 10. The data are of high accuracy, in spite of several problems in the instrument. The polarization is positive at 440 nm. There is no direct evidence for spherical particles in the Jupiter clouds. Using a simple model of Rayleigh scattering above a Lambertian cloud layer, a unique fit is found to the observed intensity and polarization at each point on the planet. The resulting Rayleigh optical depths, if they are attributed to molecular scattering alone (i.e., no aerosols above the cloud tops), can be converted into physical altitudes of the cloud tops. The first results suggest that the north tropical zone, parts of the equatorial zone, and the red spot are all elevated regions.

Coffeen, D. L.↗

Cloud and aerosol optical depths

An airborne Sun photometer was used to measure optical depths in clear atmospheres between the appearances of broken stratus clouds, and the optical depths in the vicinity of smokes. Results show that (human) activities can alter the chemical and optical properties of background atmospheres to affect their spectral optical depths. Effects of water vapor adsorption on aerosol optical depths are apparent, based on data of the water vapor absorption band centered around 940 nm. Smoke optical depths show increases above the background atmosphere by up to two orders of magnitude. When the total optical depths measured through clouds were corrected for molecular scattering and gaseous absorption by subtracting the total optical depths measured through the background atmosphere, the resultant values are lower than those of the background aerosol at short wavelengths. The spectral dependence of these cloud optical depths is neutral, however, in contrast to that of the background aerosol or the molecular atmosphere.

Pueschel, R. F.↗

Theoretical line shapes for rotational spectra of HCl in Ar

An interaction potential for HCl-Ar recently derived from spectra of van der Waals complexes (Hutson,1988) has been used to obtain converged close-coupling scattering S matrices from which pressure broadening (linewidth, line shift, and line coupling) cross sections have been computed within the Fano-Ben-Reuven formalism. Linewidths agree well with experimental data with the exception of the 0-1 line at low temperatures (an error of about 15 percent at 125 K). Line shifts, especially the largest, for the 0-1 line, are also in reasonable accord with experimental data. Line coupling is predicted to be quite small. The coupled-states molecular scattering approximation is found to be accurate except at very low collision energies. The infinite-order sudden approximations, on the other hand, is not reliable for this system. Inelastic scattering out of the spectroscopic levels accounts for only a fraction of the linewidth at thermal energies, especially in the lower rotational levels.

Green, Sheldon↗

Wavelength dependence of polarization. XXXV - Vertical structure of scattering layers above the visible Venus clouds

Results of multiple-scattering computations based on whole-disk and Digicon polarization observations are presented which indicate vertical inhomogeneity in the upper atmosphere of Venus. It is shown that the whole-disk observations support a thin upper haze layer of 0.18-micron particles and that the low polarization observed near the limb and terminator requires a haze of slightly larger particles. The Digicon polar regions are found to exhibit increased polarization, which is compatible with CO2 absorption measurements and is explained by increased molecular scattering above the clouds. The decrease in cloud-top height for latitudes greater than 45 deg is estimated to be approximately 1.4 km.

Lane, W. A.↗

Current Status of Aerosol Retrievals from TOMS

Properties of atmospheric aerosols over all land and water surfaces are retrieved from TOMS measurements of backscattered radiances. The TOMS technique, uses observations at two wavelengths. In the near ultraviolet (330-380 nm) range, where the effects of gaseous absorption are negligible. The retrieved properties are optical depth and a measure of aerosol absorptivity, generally expressed as single scattering albedo. The main sources of error of the TOMS aerosol products are sub-pixel cloud contamination and uncertainty on the height above the surface of UV-absorbing aerosol layers. The first error source is related to the large footprint (50 x 50 km at nadir) of the sensor, and the lack of detection capability of sub-pixel size clouds. The uncertainty associated with the height of the absorbing aerosol layers, on the other hand, is related to the pressure dependence of the molecular scattering process, which is the basis of the near-UV method of absorbing aerosol detection. The detection of non-absorbing aerosols is not sensitive to aerosol layer height. We will report on the ongoing work to overcome both of these difficulties. Coincident measurements of high spatial resolution thermal infrared radiances are used to address the cloud contamination issue. Mostly clear scenes for aerosol retrieval are selected by examining the spatial homogeneity of the IR radiance measurements within a TOMS pixel. The approach to reduce the uncertainty associated with the height of the aerosol layer by making use of a chemical transport model will also be discussed.

Torres, O.↗

Performance of the Lidar Design and Data Algorithms for the GLAS Global Cloud and Aerosol Measurements

The Geoscience Laser Altimeter System (GLAS) launched in early 2003 is the first polar orbiting satellite lidar. The instrument design includes high performance observations of the distribution and optical scattering cross sections of atmospheric clouds and aerosol. The backscatter lidar operates at two wavelengths, 532 and 1064 nm. For the atmospheric cloud and aerosol measurements, the 532 nm channel was designed for ultra high efficiency with solid state photon counting detectors and etalon filtering. Data processing algorithms were developed to calibrate and normalize the signals and produce global scale data products of the height distribution of cloud and aerosol layers and their optical depths and particulate scattering cross sections up to the limit of optical attenuation. The paper will concentrate on the effectiveness and limitations of the lidar channel design and data product algorithms. Both atmospheric receiver channels meet and exceed their design goals. Geiger Mode Avalanche Photodiode modules are used for the 532 nm signal. The operational experience is that some signal artifacts and non-linearity require correction in data processing. As with all photon counting detectors, a pulse-pile-up calibration is an important aspect of the measurement. Additional signal corrections were found to be necessary relating to correction of a saturation signal-run-on effect and also for daytime data, a small range dependent variation in the responsivity. It was possible to correct for these signal errors in data processing and achieve the requirement to accurately profile aerosol and cloud cross section down to 10-7 llm-sr. The analysis procedure employs a precise calibration against molecular scattering in the mid-stratosphere. The 1064 nm channel detection employs a high-speed analog APD for surface and atmospheric measurements where the detection sensitivity is limited by detector noise and is over an order of magnitude less than at 532 nm. A unique feature of the GLAS is a full acquisition of the surface return pulse, which has important application to the atmospheric transmission retrieval.

Spinhirne, James D.↗

Visible region remote spectroscopy of polluted water

The use of an airborne spectrometer for measuring the amount of pollutants under the surface of a body of water is discussed. Difficulties created by high water absorption, atmospheric absorption, molecular scattering by water, and atmospheric scattering for the range of wavelengths from 0.2 to 20.0 microns are described. It was determined that some form of quantitative measurement of subsurface pollutants is possible using an airborne spectrometer.

White, P. G.↗

Large-scale reflection and absorption of solar radiation by clouds as influencing earth radiation budgets - New aircraft measurements.

Discussion of the first results of extensive recent aircraft measurements, in the short wavelengths, of the reflection and absorption properties of clouds and their impact on radiation budget studies. From the data obtained, the albedo of typical cloud types was determined integrally and spectrally. Some preliminary results are also offered for short-wave absorption and the apparent transmission of clouds. The effect of the atmospheric pathlength between sensor and target, exhibited through molecular scattering and aerosol scattering and absorption, is included in the data analysis. Results are also presented on vertical (short-wave) radiative flux profiles, within specific wavelength intervals, from near sea level to altitudes of about 40,000 ft over relatively short time intervals.

Drummond, A. J.↗

Doppler broadening effect on collision cross section functions - Deconvolution of the thermal averaging

The surprising feature of the Doppler problem in threshold determination is the 'amplification effect' of the target's thermal energy spread. The small thermal energy spread of the target molecules results in a large dispersion in relative kinetic energy. The Doppler broadening effect in connection with thermal energy beam experiments is discussed, and a procedure is recommended for the deconvolution of molecular scattering cross-section functions whose dominant dependence upon relative velocity is approximately that of the standard low-energy form.

Bernstein, R. B.↗

The imaging photopolarimeter experiment on Pioneer 11

For 2 weeks continuous imaging, photometry, and polarimetry observations were made of Jupiter and the Galilean satellites in red and blue light from Pioneer 11. Measurements of Jupiter's north and south polar regions were possible because the spacecraft trajectory was highly inclined to the planet's equatorial plane. One of the highest resolution images obtained is presented here along with a comparison of a sample of our photometric and polarimetric data with a simple model. The data seem consistent with increased molecular scattering at high latitudes.

Baker, A. L.↗

The use of lidar for atmospheric measurements

The present work discusses basic lidar theory and the analysis of lidar return signals in tropospheric and stratospheric measurements. An example of the determination of water vapor mixing height through aerosol and molecular scattering functions is given.

Mccormick, M. P.↗

An estimate of the influence of sediment concentration and type on remote sensing penetration depth for various coastal waters

Under the assumptions of collimated light, a homogenous water column, zero molecular scattering, and constant ratio of volume scattering function to scattering coefficient, estimates of the remote sensing depth parameter, Z90, are made for various coastal waters at 540 nm. Calculations indicate that sediment concentration and type have a strong influence on remote sensing depth when concentrations are below 5 mg/theta. Above 5 mg/theta, the absorption coefficient of the sediments becomes large in comparison to that of water, causing Z90 values to be less than 2 m with only small differences between various sediment types.

Whitlock, C. H.↗

Semiclassical theory of electronically nonadiabatic transitions in molecular collision processes

An introductory account of the semiclassical theory of the S-matrix for molecular collision processes is presented, with special emphasis on electronically nonadiabatic transitions. This theory is based on the incorporation of classical mechanics with quantum superposition, and in practice makes use of the analytic continuation of classical mechanics into the complex space of time domain. The relevant concepts of molecular scattering theory and related dynamical models are described and the formalism is developed and illustrated with simple examples - collinear collision of the A+BC type. The theory is then extended to include the effects of laser-induced nonadiabatic transitions. Two bound continuum processes collisional ionization and collision-induced emission also amenable to the same general semiclassical treatment are discussed.

Lam, K. S.↗

Model studies of nitric oxide fluorescence in the earth's backscattered spectrum

Fluorescent emissions from nitric oxide appear imposed upon the Rayleigh backscattered spectrum of the earth's atmosphere between 250 and 300 nm in wavelength. Satellite instruments designed to monitor the global ozone distribution can routinely observe these signals although techniques for exploiting the data are not yet available. Application of a radiative transfer equation developed for an atmosphere including absorption by ozone, molecular scattering, and nitric oxide fluorescence shows the three most prominent NO emissions relative to the 250-300 nm backscattered sunlight to be the (1,4), (1,6), and (0,3) gamma bands. Analysis of the contribution function for each emission band indicates that the fluorescent signals can provide useful information on the magnitude and variability of nitric oxide between 40 and 140 km in altitude.

Frederick, J. E.↗

Shuttle measured contaminant environment and modeling for payloads. Preliminary assessment of the space telescope environment in the shuttle bay

A baseline gaseous and particulate environment of the Shuttle bay was developed based on the various measurements which were made during the first four flights of the Shuttle. The environment is described by the time dependent pressure, density, scattered molecular fluxes, the column densities and including the transient effects of water dumps, engine firings and opening and closing of the bay doors. The particulate conditions in the ambient and on surfaces were predicted as a function of the mission time based on the available data. This basic Shuttle environment when combined with the outgassing and the particulate contributions of the payloads, can provide a description of the environment of a payload in the Shuttle bay. As an example of this application, the environment of the Space Telescope in the bay, which may be representative of the environment of several payloads, was derived. Among the many findings obtained in the process of modeling the environment, one is that the payloads environment in the bay is not substantially different or more objectionable than the self-generated environment of a large payload or spacecraft. It is, however, more severe during ground facilities operations, the first 15 to 20 hours of the flight, during and for a short period after ater was dumped overboard, and the reaction control engines are being fired.

Scialdone, J. J.↗

Rotational inelastic cross sections for OCS-Ar, OCS-He, OCS-H2 collisions - A comparison between theory and experiment

The experimental determination of absorption line profiles for OCS nu3 vibrational transitions broadened by collisions with Ar, He, and H3 buffer gases is reported. The experimental method using diode laser spectroscopy in the five micron region is described. The data are compared with theoretical values obtained using intermolecular potentials previously suggested for these systems and infinite order sudden approximation molecular scattering calculations.

Broquier, M.↗

Mobile lidar system for measurement of water vapor mixing ratio and ozone number density

The Water Vapor Lidar was modified and extended to make differential absorption measurements of ozone. Water vapor measurements make use of a weak molecular scattering process known as Raman scattering. It is characterized by a shift in wavelength of the scattered beam of light relative to the incident one. Some of the energy of the incident photon is converted to vibrational or rotational energy within the molecule leaving the scattered photon shifted to a slightly longer wavelength. When performing water vapor measurements, profiles are acquired of water vapor mixing ratio from near the ground to beyond 7 km every 2 minutes. By forming a color composite image of the individual profiles, the spatial and temporal evolution of water vapor is visible with vertical resolution of 75 to 150m and temporal resolution of 2 minutes. The ozone lidar is intended for use as a cross calibration facility for other stationary ozone lidar systems. The ozone measurement employs the technique known as differential absorption. The backscattered laser radiation from two different wavelengths is measured. Successful measurements of 308 nm returns were made from 80 km with an averaging period of 6 hours. Using these data and a standard atmosphere density curve, an ozone number density profile was made which agrees very well with the standard ozone curve between 20 and 40 km.

Whiteman, D.↗