Search NASA⌕ Search

SEARCH · Search NASA

Results for “monoclinic order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Carboxylic and dicarboxylic acids extracted from crushed magnesium oxide single crystals

Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THF) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and 1H-NMR. The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P21/c with ao = 5.543 A, bo = 8.845 A, co = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg g-1 MgO. The MgO crystals from which these organic acids were extracted grew from the 2860 degrees C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)n-. The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

NASA Discipline Exobiology↗
DOE OSTI2025

Colossal Cryogenic Electro‐Optic Response Through Metastability in Strained BaTiO 3 Thin Films

The search for thin film electro-optic materials that can retain superior performance under cryogenic conditions has become critical for quantum computing. Barium titanate thin films show large linear electro-optic coefficients in the tetragonal phase at room temperature, which is severely degraded down to ≈200 pm V −1 in the rhombohedral phase at cryogenic temperatures. There is immense interest in manipulating these phase transformations and retaining superior electro-optic properties down to liquid helium temperature. Utilizing the thermodynamic theory of optical properties, a large low-temperature electro-optic response is designed by engineering the energetic competition between different ferroelectric phases, leading to a low-symmetry monoclinic phase with a massive electro-optic response. The existence of this phase is demonstrated in a strain-tuned BaTiO 3 thin film that exhibits a linear electro-optic coefficient of 2516 ± 100 pm V −1 at 5 K, which is an order of magnitude higher than the best reported performance thus far. Importantly, the electro-optic coefficient increases by 100 × during cooling, unlike the conventional films, where it degrades. Further, at the lowest temperature, significant higher order electro-optic responses also emerge. These results represent a new framework for designing materials with property enhancements by stabilizing highly tunable metastable phases with strain.

barium titanate↗
DOE OSTI2021

Accelerated microwave-assisted synthesis and in situ X-ray scattering of tungsten-substituted vanadium dioxide (V 1-x W x O 2 )

Vanadium dioxide (VO 2 ) has been widely studied due to its metal-insulator phase transition at 68°C, below which it is a semiconducting monoclinic phase, P2 1 /c, and above it is a metallic tetragonal phase, P4 2 /mnm. Substituting vanadium with transition metals allows transition temperature tunability. An accelerated microwave-assisted synthesis for VO 2 and 5d tungsten substituted VO 2 presented herein decreased synthesis time by three orders of magnitude while maintaining phase purity, particle size, and transition character. Tungsten substitution amount was determined using inductively coupled plasma-optical emission spectroscopy. Differential scanning calorimetry, superconducting quantum interference device measurements, and in-situ heating and cooling experiments monitored through synchrotron x-ray diffraction (XRD) confirmed the transition temperature decreased with increased tungsten substitution. Scanning electron microscopy analyzed through the line-intercept method produced an average particle size of 3 – 5 μm. Average structure and local structure phase purity was determined through Rietveld analysis of synchrotron XRD and least-squares refinement of pair-distribution function data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure of triple perovskite BaSr 2 MgTa 2 O 9 revisited

An experimental investigation of the structure and crystal-chemistry of the triple perovskite BaSr 2 MgTa 2 O 9 is reported. Polycrystalline BaSr 2 MgTa 2 O 9 was synthesized via solid-state reaction and its structure quantitatively probed at 10 and 300 ​K using neutron diffraction. Monoclinic (A2/m, a 0 $\bar{b}$ – $b$ – ) and trigonal structural models (P$\bar{3}$c1, a – a – a – ) were fit to diffraction data. The former was found to correctly reproduce experimental intensities, while the latter failed to do so. This difference is attributed to the ability of the monoclinic model to accurately reflect octahedral tilting. BaSr 2 MgTa 2 O 9 features corner-sharing MgO 6 and TaO 6 octahedra with barium and strontium cations occupying cubooctahedral holes. Barium and strontium are disordered over the A site, whereas B site cations magnesium and tantalum are ordered. Finally, chemical substitution of strontium for barium in Ba 3 MgTa 2 O 9 induces tilting of MgO 6 and TaO 6 octahedra in two directions and geometric distortions of MgO 6 octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1998

Carboxylic and Dicarboxylic Acids Extracted from Crushed Magnesium Oxide Single Crystals

Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THE) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and (sup 1)H-NMR (Nuclear Magnetic Resonance). The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS (Gas Chromatography - Mass Spectroscopy) analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P2(sub 1)/c with a(sub o) = 5.543 A, b(sub o) = 8.845 A, c(sub o) = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg/g MgO. The MgO crystals from which these organic acids were extracted grew from the 2360 C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H, and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)(sup n-). The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

Freund, Friedemann↗
DOE OSTI2021

Symmetry mismatch controlled ferroelastic domain ordering and the functional properties of manganite films on cubic miscut substrates

We have studied the magnetotransport properties and strain release mechanisms in ferroelastic La 0.9 Sr 0.1 MnO 3 (LSMO) epitaxial thin films on SrTiO 3 (STO)(001) substrates with different miscut angles. The substrate miscut angle plays a critical role in releasing shear strain and has a huge impact on the properties of the films. The strain relaxes by monoclinic distortion for films on low miscut substrates and for higher miscut substrates, the strain relaxation causes the formation of periodic twin domains with larger periodicities. Furthermore, we observe that the Curie temperature (T C ) decreases systematically, and magnetoresistance (MR) increases with increasing the miscut angle. Such changes in the magnetic and transport properties could be due to the increased density of phase boundaries (PBs) with the increase of miscut angle. This work provides a way to tailor film microstructures and subsequent functional properties of other complex oxide films on miscut substrates with symmetry mismatch.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Developing techniques for crystal growth synthesis and characterization of rare earth-silicon-germanium magnetoresponsive alloys

In this study, a crystal growth technique was developed for the family of intermetallic, magnetoresponsive RE 5 (Si 1-x Ge x ) 4 alloys in order to access the intrinsic and anisotropic properties. Initial bulk properties measured on polycrystalline samples alluded to the properties being obscured or averaged and high-quality, well-characterized, single crystals would clarify this. Successful crystal growth led to development of oriented sample preparation techniques specific for the crystal structures (monoclinic and orthorhombic) and mechanical properties (hard and brittle) of these alloys, and customized for the various measurement techniques undertaken. Here we describe our journey, sometimes circuitous, from crystal growth to sample preparation and cite the scientific discoveries that came about as a result.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-temperature superconductivity on the verge of a structural instability in lanthanum superhydride

Abstract The possibility of high, room-temperature superconductivity was predicted for metallic hydrogen in the 1960s. However, metallization and superconductivity of hydrogen are yet to be unambiguously demonstrated and may require pressures as high as 5 million atmospheres. Rare earth based “superhydrides”, such as LaH 10 , can be considered as a close approximation of metallic hydrogen even though they form at moderately lower pressures. In superhydrides the predominance of H-H metallic bonds and high superconducting transition temperatures bear the hallmarks of metallic hydrogen. Still, experimental studies revealing the key factors controlling their superconductivity are scarce. Here, we report the pressure and magnetic field dependence of the superconducting order observed in LaH 10 . We determine that the high-symmetry high-temperature superconducting Fm-3m phase of LaH 10 can be stabilized at substantially lower pressures than previously thought. We find a remarkable correlation between superconductivity and a structural instability indicating that lattice vibrations, responsible for the monoclinic structural distortions in LaH 10 , strongly affect the superconducting coupling.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Phase diagram and electrical behavior of silicon-rich iridium silicide compounds

The iridium-silicon phase diagram on the silicon-rich side was investigated by means of X-ray powder diffraction, density, differential thermal analysis, metalography, microprobe analysis, and electrical resistivity. Attempts were made to prepare eight previously reported silicon-rich iridium silicide compounds by arc melting and Bridgman-like growth. However, microprobe analysis identified only four distinct compositions: IrSi, Ir3Si4, Ir3Si5 and IrSi sub about 3. The existence of Ir4Si5 could not be confirmed in this study, even though the crystal structure has been previously reported. Differential thermal analysis (DTA) in conjunction with X-ray powder diffraction confirm polymorphism in IrSi sub about 3, determined to have orthorhombic and monoclinic unit cells in the high and low temperature forms. A eutectic composition alloy of 83 +/- 1 atomic percent silicon was observed between IrSi sub about 3 and silicon. Ir3Si4 exhibits distinct metallic behavior while Ir3Si5 is semiconducting. Both and IrSi and IrSi sub about 3 exhibit nearly temperature independent electrical resistivities on the order of 5-10 x 10 exp -6 ohms-m.

Allevato, C. E.↗
DOE OSTI2026

Pressure‐Induced Structural and Magnetic Evolution in Layered Antiferromagnet YbMn 2 Sb 2

Electronic states under pressure exhibit unconventional spin and charge dynamics that provide a powerful route to uncover exotic phases in quantum materials. Here, we present the structural, magnetic, and electronic evolution of YbMn 2 Sb 2 under pressure. Single-crystal X-ray diffraction reveals a pressure-induced structural transition from the space group trigonal P$\overline{3}$m1 to the monoclinic P2 1 /m phase near 3.5 GPa, which remains stable up to 10 GPa. Magnetization measurements display an anomalously weak net magnetic moment and the absence of Curie–Weiss behavior up to 400 K, suggesting the formation of short-range Mn moment pairs that cancel macroscopically and subsequently evolve into long-range order upon cooling. Temperature-dependent resistivity shows semiconducting behavior with a transition at ∼119 K at ambient pressure, while pressure induces a dramatic suppression of resistance and the emergence of metallic-like temperature dependence, stabilized beyond 5 GPa. This pressure-driven semiconductor-metal transition is consistent with our density functional theory calculations, confirming the closing of the band gap under compression. Neutron diffraction under pressure identifies an incommensurate magnetic structure with antiparallel correlations between paired spins. Together, these results demonstrate how pressure-driven structural tuning and competing exchange interactions stabilize unconventional magnetic states in this low-dimensional magnetic semiconductor.

antiferromagnetic semiconductor↗
DOE OSTI2026

A new layered kagome strip structure Na 2 Co 3 (AsO 4 ) 2 (OH) 2 : static and dynamic magnetic properties

One-dimensional kagome strip chains share much of the same frustrated structural motif as two-dimensional kagome antiferromagnets, making them valuable for deepening our understanding of kagome lattice magnetism. In this paper, we report the hydrothermal synthesis and detailed structural and property characterization of Na 2 Co 3 (AsO 4 ) 2 (OH) 2 , a striped kagome system. The crystal structure was characterized using single crystal X-ray diffraction which reveals that Na 2 Co 3 (AsO 4 ) 2 (OH) 2 crystallizes in monoclinic crystal system C2/m. The structure features a one-dimensional kagome strip lattice built from Co 2+ ions and undergoes an antiferromagnetic transition at T N = 14 K. The magnetic ground state at zero field was characterized using neutron powder diffraction. Below the magnetic transition, Na 2 Co 3 (AsO 4 ) 2 (OH) 2 orders into an antiferromagnetic structure with a k-vector (0.5, 0.5, 0.5). In the proposed model, the Co1 moment is predominantly confined to the ac-plane while the Co2 moment is primarily aligned along the b-axis. Two flat bands were observed in the inelastic neutron spectra below the magnetic transition, 5 and 10 meV. Inelastic neutron spectra were modeled with a Heisenberg Hamiltonian including three nearest-neighbor exchange interactions (J 1 , J 2 , J 3 ) and strong single-ion anisotropy to stabilize the observed magnetic structure. Our study highlights the complexity of Co 2+ -based kagome strip magnetic lattice compound Na 2 Co 3 (AsO 4 ) 2 (OH) 2 which provides an excellent platform to broaden our understanding of the frustrated kagome magnetic lattice space.

Liurukara, Duminda S. [Oak Ridge National Laborato↗
DOE OSTI2024

The self-annealing of irradiation induced defects in magnetite Fe 3 O 4 : Revealing reversible irradiation-induced disorder transformation through in situ TEM

This work reports heavy ion-irradiation effects in polycrystalline Fe 3 O 4 . For this matter, Fe/Fe 3 O 4 heterostructures were irradiated in situ in a transmission electron microscopy with 1 MeV Kr ions at 50 K. Evidence of cubic to monoclinic transformation (a.k.a Verwey transition) was recorded in some magnetite grains upon cooling the sample (around 90 K); however, most of the oxide grains retain their cubic spinel structure. Irradiation effects were analyzed in the cubic phase up to a maximum dose of 38 dpa without the sign of amorphization. The extinction of first-order reflections was recorded at doses below 1 dpa, indicating the formation of a new (metastable) phase with half of the lattice parameters compared to the unirradiated Fe 3 O 4 crystal. The formation of the new crystalline phase, which also presents a high resistance to amorphization, is related to the disordering of the cation lattice and the high mobility of the cation interstitials. The metastable phase readily recovers around 225 K during the natural warming of the sample from 50 K to room temperature.

Atom irradiation effects↗
DOE OSTI2020

Effect of heating/cooling dynamics in the hysteresis loop and tunable IR emissivity of VO 2 thin films

We experimentally investigate the semiconductor-to-metal transition (SMT) in vanadium dioxide thin films using an infrared thermographic technique. During the semiconductor to metal phase change process, VO 2 optical properties dynamically change and infrared emission undergoes a hysteresis loop due to differences between heating and cooling stages. The shape of the hysteresis loop was accurately monitored under different dynamic heating/cooling rates. In order to quantify and understand the effects of different rates, we used a numerical modelling approach in which a VO 2 thin layer was modeled as metamaterial. The main experimental findings are interpreted assuming that both the rate of formation and shape of metallic inclusions are tuned with the heating/cooling rate. The structural transition from monoclinic to tetragonal phases is the main mechanism for controlling the global properties of the phase transition. However, our experimental results reveal that the dynamics of the heating/cooling process can become a useful parameter for further tuning options and lays out a macroscopic optical sensing scheme for the microscopic phase change dynamics of VO 2 . Our study sheds light on phase-transition dynamics and their effect on the infrared emission spectra of VO 2 thin films, therefore enabling the heating/cooling rate to be an additional parameter to control infrared emission characteristics of thermal emitters. The hysteresis loop represents the phase coexistence region, thus being of fundamental importance for several applications, such as the operation of radiative thermal logic elements based on phase transition materials. For such applications, the phase transition region is shifted for heating and cooling processes. We also show that, depending on the way the phase change elements are heated, the temperature operation range will be slightly modified.

42 ENGINEERING↗
NASA NTRS1998

Determination of Stress Coefficient Terms in Cracked Solids for Monoclinic Materials with Plane Symmetry at x3 = 0

Determination of all the coefficients in the crack tip field expansion for monoclinic materials under two-dimensional deformation is presented in this report. For monoclinic materials with a plane of material symmetry at x(sub 3) = 0, the in-plane deformation is decoupled from the anti-plane deformation. In the case of in-plane deformation, utilizing conservation laws of elasticity and Betti's reciprocal theorem, together with selected auxiliary fields, T-stress and third-order stress coefficients near the crack tip are evaluated first from path-independent line integrals. To determine the T-stress terms using the J-integral and Betti's reciprocal work theorem, auxiliary fields under a concentrated force and moment acting at the crack tip are used respectively. Through the use of Stroh formalism in anisotropic elasticity, analytical expressions for all the coefficients including the stress intensity factors are derived in a compact form that has surprisingly simple structure in terms of the Barnett-Lothe tensors, L. The solution forms for degenerated materials, orthotropic, and isotropic materials are presented.

Yuan, F. G.↗
DOE OSTI2022

Nanoscale chemistry and ion segregation in zirconia-based ceramic at grain boundaries by atom probe tomography

In this work nanoscale features that are of importance in the stability of yttria-stabilized tetragonal zirconia (Y-TZP) are quantified through atom probe tomography. In-depth analysis of grain boundary chemistry revealed preferential segregation of lighter and smaller ions towards specific grain boundaries. The relationship between elemental segregation and the local atomistic structure is investigated at the sub-nanometer level to gain insights on nanoscale features associated with the tetragonal-monoclinic phase transformation in Y-TZP through grain boundary characterization. Furthermore, principal component analysis was implemented to reveal any potential biases from varied field evaporation across stabilizer-rich grain boundaries. The observed variations in ion density across different grains suggested a variation in field which was attributed to potential variations in grain crystal orientation. In order to reveal the subtle depletion of oxygen atoms within grain boundaries a new methodology to map oxygen vacancies is proposed, utilizing the relative neighborhood chemistry of individual yttrium atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Powder X-ray diffraction of fluorometholone, C 22 H 29 FO 4

Commercial fluorometholone, CAS #426-13-1, crystallizes in the monoclinic space group P 2 1 (#4) with a = 6.40648(2), b = 13.43260(5), c = 11.00060(8) Å, β = 92.8203(5)°, V = 945.517(5) Å 3 , and Z = 2. A reduced cell search in the Cambridge Structural Database yielded one previous structure determination, using single-crystal data at 292 K. In this work, the sample was ordered from the United States Pharmacopeial Convention (Lot # R032K0) and analyzed as-received. The room temperature (295 K) crystal structure was refined using synchrotron ( λ = 0.412826 Å) powder diffraction data and optimized using density functional theory (DFT) techniques. Hydrogen positions were included as a part of the structure and were re-calculated during the refinement. The diffraction data were collected on beamline 11-BM at the Advanced Photon Source, Argonne National Laboratory, and the powder X-ray diffraction pattern of the compound has been submitted to ICDD® for inclusion in the Powder Diffraction File™. The agreement of the Rietveld-refined and DFT-optimized structures is excellent; the root-mean-square Cartesian displacement is 0.060 Å. In addition to the O–H⋯O hydrogen bonds observed by Park et al. (Park, Y. J., Lee, M. Y., and Cho, S. I. ( 1992 ). “Fluorometholone,” J. Korean Chem. Soc. 36 , 812–817), C–H⋯O hydrogen bonds contribute to the crystal energy.

Gonzalez, Diana↗
DOE OSTI2026

Reconfigurable self-assembly of porous anisotropic colloids in nematic liquid crystals

Dispersions of anisotropic nanoparticles in liquid crystalline hosts recently yielded new soft condensed matter states, like the thermally reconfigurable monoclinic and orthorhombic biaxial nematic liquid crystals, with a plethora of unusual phases and phase transformations. Our current study shows that the nanoscale porous nature of colloids with micrometer-range overall dimensions also enables highly reconfigurable orientations and assemblies of the microparticles, allowing for realization of condensed matter states with unusual combinations of low-symmetry nematic or smectic order and fluidity. Much like the anisotropic nanoparticles studied previously, these nanoporous anisotropic colloids exhibit thermally reconfigurable oriented alignment with respect to the far-field director, as well as diverse low-symmetry liquid crystalline phase behaviors. Furthermore, our findings open doors to fundamental and applied uses of low-symmetry molecular-colloidal orientationally ordered states of matter with uninhibited fluidity, as well as liquid crystals with partial positional ordering, like low-symmetry smectics, which could lead to applications in metamaterial designs, electro-optics, photonics, etc.

colloidal dispersion↗