Search NASA⌕ Search

SEARCH · Search NASA

Results for “monotone solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

82 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Surface Transfer Doping in MoO 3– x /Hydrogenated Diamond Heterostructure

Surface transfer doping is proposed to be a potential solution for doping diamond, which is hard to dope for applications in high-power electronics. While MoO 3 is found to be an effective surface electron acceptor for hydrogen-terminated diamond with a negative electron affinity, the effects of commonly existing oxygen vacancies remain elusive. We have performed reactive molecular dynamics simulations to study the deposition of MoO 3–x on a hydrogenated diamond (111) surface and used first-principles calculations based on density functional theory to investigate the electronic structures and charge transfer mechanisms. We find that MoO 3–x is an effective surface electron acceptor and the spatial extent of doped holes in hydrogenated diamond is extended, promoting excellent transport properties. Charge transfer is found to monotonically decrease with the level of oxygen vacancy, providing guidance for engineering of the surface transfer doping process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dynamics of poly[n]catenane melts

Inspired by advances in the chemical synthesis of interlocking polymer architectures, extensive molecular dynamics simulations have been conducted to study the dynamical properties of poly[n]catenanes-polymers composed entirely of interlocking rings-in the melt state. Both the degree of polymerization (number of links) and the number of beads per ring are systematically varied, and the results are compared to linear and ring polymers. Herein, a simple Rouse-like model is presented, and its analytical solution suggests a decomposition of the dynamics into "ring-like" and "linear-like" regimes at short and long times, respectively. In agreement with this picture, multiple sub-diffusive regimes are observed in the monomer mean-squared-displacements even though interchain entanglement is not prevalent in the system. However, the Rouse-type model does not account for the topological effects of the mechanical bonds, which significantly alter the dynamics at intermediate length scales both within the rings and at the chain segment scales. The stress relaxation in the system is extremely rapid and may be conveniently separated into ring-like and linear-like contributions, again in agreement with the Rouse picture. However, the viscosity has a non-monotonic dependence on the ring size for long chains, which disagrees strongly with theoretical predictions. This unexpected observation cannot be explained in terms of chain disentanglement and is inconsistent with other measures of polymer relaxation. Possible mechanisms for this behavior are proposed and implications for materials design are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Elucidating the temperature and density dependence of silver chloride hydration numbers in high-temperature water vapor: A first-principles molecular simulation study

Hydration numbers of metal complexes in low-density aqueous solutions are required for developing geochemical models for ore-forming metals and for designing supercritical desalination processes. In this study, we investigate the temperature and density dependence of the hydration numbers of silver chloride at 623 K, 673 K, and 713 K and densities of 10–100 kg/m 3 . Experimental estimates of the hydration number in the literature for AgCl at these conditions are inconclusive and possibly contradictory as to the temperature and density dependence. First-principles molecular simulation presents an attractive alternative to experimental measurements. Specifically, recent work shows that machine-learning-accelerated nested Monte Carlo simulations provide reliable estimates for the hydration numbers of CuCl at 623 K from 10 to 100 kg/m 3 . Using the same technique, we find a monotonic temperature dependence, with the hydration number decreasing slightly with increasing temperature. In addition, the simulation-predicted hydration numbers steadily increase with increasing density. These temperature and density trends are in agreement with certain experimental data sets. Therefore, this work demonstrates how first-principles Monte Carlo simulations assist in resolving discrepancies between experimental data sets. Our simulation results also correctly predict that the hydration number, and thus also the solubility, of AgCl is lower than that of CuCl under the same conditions. Furthermore, the bond length and angle formed between the water complex and AgCl differ from those for CuCl, consistent with the lower solubility of AgCl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Unexpected trends in the enhanced Ce 3+ surface concentration in ceria–zirconia catalyst materials

Despite the immense importance of ceria–zirconia solid solutions in heterogeneous catalysis, and the growing consensus that catalytic activity correlates with the concentration of reduced Ce 3+ species and accompanying oxygen vacancies, the extent of reduction at the surfaces of these materials, where catalysis occurs, is unknown. Using angle-resolved X-ray Absorption Near Edge Spectroscopy (XANES), we quantify under technologically relevant conditions the Ce 3+ concentration in the surface (2–3 nm) and bulk regions of ceria–zirconia films grown on single crystal yttria-stabilized zirconia, YSZ (001). In all circumstances, we observe substantial Ce 3+ enrichment at the surface relative to the bulk. Surprisingly, the degree of enhancement is highest in the absence of Zr. This behavior stands in direct contrast to that of the bulk in which the Ce 3+ concentration monotonically increases with increasing Zr content. Overall, these results suggest that while Zr enhances the oxygen storage capacity in ceria, undoped ceria may have higher surface catalytic activity. They further urge caution in the use of bulk properties as surrogate descriptors for surface characteristics and hence catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Geometric decoherence time in Lindbladian dynamics

The onset of decoherence in open many-body systems lacks a dynamical timescale grounded in the loss of bipartite entanglement. Here, we introduce the geometric decoherence time, defined as the earliest moment the monotone relation between logarithmic negativity and Rényi-$\frac{1}{2}$ entropy—exactly equal across any bipartition for pure states—breaks down under open-system evolution, signaling entropy growth without accompanying entanglement growth. We establish this criterion in both single-particle Gaussian dynamics and many-body Lindbladian evolution. We show that quantum mutual information provides a complementary long-time diagnostic: Its asymptotic vanishing is equivalent to factorization of the steady state across the bipartition, a condition strictly stronger than separability, and whenever a product steady state is approached exponentially in trace norm, negativity and mutual information share the same decay rate. In the presence of a strong symmetry, this tracking can fail—residual classical correlations can survive after entanglement has vanished. In the Kitaev chain with balanced gain and loss, we derive a closed-form solution and show that the topological phase sustains longer coherence times than the trivial phase at identical dissipation, with a local minimum at the chiral-symmetric point. In the interacting XXZ chain, exact many-body evolution shows that local 𝑍 dephasing preserves residual classical correlations, whereas gain and loss restore the mutual-information tracking of negativity. Furthermore, our results establish the geometric decoherence time as a dynamical scale tracking the onset of decoherence.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Numerical Investigation of Two-Stage Vapor Compression System with Simultaneous Vapor and Liquid Injection

Two-stage vapor compression systems can be advantageous over single-stage systems by providing improved system performance, lower discharge temperature and reduced throttling losses. These systems employ various intermediate configurations, such as liquid injection and vapor injection. This paper presents a configuration for a R1234ze(E) two-stage air-conditioning system using a turbo compressor with two injection ports, one for vapor injection and the second for liquid injection. The liquid injection is used to cool the motor and electronics. A component-based representation and solution approach was used to simulate the two-stage compression system with simultaneous vapor and liquid injection at steady state. The turbo compressor was represented using a customized performance map. The condenser and the evaporator were modeled using finite-volume approach. A parametric study was conducted to assess the impact of the following three variables on the system performance: vapor injection ratio, condenser air flow rate, and discharge pipe pressure drop. The simulation results show that as the vapor injection ratio increased, the system performance undergoes a tradeoff between an enhanced subcooling effect (and thus enhanced unit refrigeration capacity) and a decreased suction mass flow rate. Maximum COP occurs when the vapor injection ratio was 0.1. The results also show that as the condenser air flow rate increased, both the capacity and power consumption (including fan power) increased monotonically, and COP increased first and then decreased. At 75% load, the COP improvement at the optimum flow rate was marginally less than 0.5%. Lastly, higher discharge pipe pressure drop increased the discharge pressure. It showed very small effect on the overall system performance at the condition selected for the current study.

component-based steady-state simulation↗
DOE OSTI2023

Mn(Pt 1–x Pd x ) 5 P: Isovalent tuning of Mn-sublattice magnetic order

Here, e report the growth and characterization of MnPd 5 P, a rare-earth-free ferromagnet, with T C ≈ 295 K and planar anisotropy, and conduct a substitutional study with its antiferromagnetic analogue MnPt 5 P. We provide a solution route to grow large single crystals of MnPd 5 P and the series Mn(Pt 1–x Pd x ) 5 P by adding Mn into Pd-P and (Pt 1–x Pd x )-P based melts. All compounds in the family adopt the layered anti-CeCoIn5 type structure with the space group P4/mmm, and EDS and X-ray diffraction results indicate that MnPt 5 P and MnPd 5 P form a complete solid solution. Based on measurements of the temperature- and field-dependent magnetization and resistance, we construct a temperature-composition (T-x) phase diagram for Mn(Pt 1–x Pd x ) 5 P and demonstrate that the initial antiferromagnetic order found in MnPt 5 P is extraordinarily sensitive to Pd substitution. At low Pd fractions (x < 0.010), the single antiferromagnetic transition in pure MnPt 5 P splits into a higher temperature ferromagnetic transition followed first, upon cooling, by a lower temperature ferromagnetic to antiferromagnetic transition and then by a re-entrant antiferromagnetic to ferromagnetic transition at even lower temperatures. The antiferromagnetic region makes up a bubble phase that persists up to x ≈ 0.008-0.009 for T ≈ 150 K, with all samples x < 0.008 recovering their initial ferromagnetic state upon further cooling to base temperature. Over the same low substitution range we find a non-monotonic change in the room temperature value of the unit cell volume, further suggesting that pure MnPt 5 P is very close to an instability. Once x > 0.010, Mn(Pt 1–x Pd x ) 5 P undergoes a only single transition into the ferromagnetic phase. The Curie temperature initially increases rapidly with x, rising from T C ≈ 197 K at x = 0.013 to a maximum of T C ≈ 312 K for x ≈ 0.62, and then falling back to T C ≈ 295 K for pure MnPd 5 P (x = 1.00). Given that Pt and Pd are isoelectronic, this work raises questions as to the origin of the extreme sensitivity of the magnetic ground state in MnPt 5 P upon introducing Pd.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

$${\mathcal{P}}{\mathcal{T}}$$-Symmetric Effective Model for Nonequilibrium Phase Transitions in a Dissipative Fermionic Mott Insulator Chain

Nonequilibrium phase transitions in open dissipative systems can be described as instabilities in the spectra and wavefunctions of effective non-Hermitian Hamiltonians invariant under simultaneous parity (P) and time-reversal (T) transformations. The degree of non-Hermiticity reflects the strength of the external drive and dissipation, and the transition is described as a loss of the PT symmetry of the solutions corresponding to stationary low-drive dynamics. This approach has been successfully applied to spin, superconducting, and Mott insulator systems. However, the microscopic foundations for the employed phenomenological models are currently lacking. Here we propose a microscopic mechanism leading to the PT-symmetric effective model in the context of the nonequilibrium Mott transition in a dissipative Hubbard chain. Our model comprises a half-filled fermionic Hubbard chain subject to a constant electric field. The dissipation is introduced via the electron-phonon coupling. We obtain the explicit expressions for the non-Hermitian parameter in terms of the electron-phonon coupling strength and driving field. Analyzing the implications of microscopic model, we find a re-entrant Mott insulator with the increasing electric field for phonon density of states that increases slower than the square of the energy (such as in one or two dimensions), or varies non-monotonously with energy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Extended Barton–Bandis model for rock joints under cyclic loading: Formulation and implicit algorithm

In this paper, the Barton–Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an implicit solution algorithm for the extended Barton–Bandis model, which can also be used for the original Barton–Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton–Bandis model into an incremental elasto-plastic framework, deriving an expression for the elastic shear stiffness being consistent with the original model formulation. We then extend the model formulation to cyclic loading conditions, incorporating the dependence of shear stress and dilation on the joint position and the shearing direction. The extension is achieved by introducing a few state-dependent variables which can be calculated with the existing material parameters. For robust and accurate utilization of the model, we also develop an implicit algorithm based on return mapping, which is unconditionally stable and guarantees the satisfaction of the strength criterion. We verify that the proposed model formulation and algorithm produce virtually the same results as the original Barton–Bandis model under monotonic shearing conditions. Here, we then validate the extended Barton–Bandis model against experimental data on natural rock joints under cycling loading conditions. The present work thus enables the Barton–Bandis model, which has been exceptionally popular in research and practice, to be applicable to a wider range of problems in rock mechanics and rock engineering.

58 GEOSCIENCES↗
DOE OSTI2022

MECHANICAL PERFORMANCE EVALUATION OF THE PRINTED CIRCUIT HEAT EXCHANGER CORE EXPERIMENTS UNDER TENSION AND PRESSURE LOADING

The printed circuit heat exchanger (PCHE) has small channels with high surface area, making them an efficient solution for next-generation nuclear plants (NGNPs). These PCHEs are fabricated through a diffusion bonding process. This fabrication step changes the microstructure of wrought metal plates. The current ASME design code does not support the PCHE design for NGNPs due to a lack of test data. Hence, there has been initiative towards elevated temperature mechanical property characterization of the diffusion bonded material. One of the most common channel shapes is a semicircular channel with sharp corners. These corners act as a stress riser at the diffusion bonding interface. Evaluating elevated temperature mechanical performance of diffusion bonded material in the presence of stress risers is an essential step towards the ASME code development of PCHE design. This study selected two specimen geometries: the first is a PCHE bar specimen for tensile loading with three rows and three columns of channels, and the second is a lab-scaled PCHE with six rows and eight columns of channels. A set of elevated temperature monotonic and cyclic tests were conducted on the PCHE bar specimen to evaluate the mechanical performance under axial tensile loadings to study the failure mechanism. The lab-scaled PCHE specimens were tested under overpressure loads at room temperature, and pressure creep and pressure creep-fatigue loadings to mimic the realistic loading conditions observed in typical NGNPs. The X-ray scans of channeled specimens show interesting observations. The test results and observations are presented in the paper.

36 MATERIALS SCIENCE↗