Results for “mooring configuration” — Page 5

NASA NTRS2011

A Hybrid Parachute Simulation Environment for the Orion Parachute Development Project

A parachute simulation environment (PSE) has been developed that aims to take advantage of legacy parachute simulation codes and modern object-oriented programming techniques. This hybrid simulation environment provides the parachute analyst with a natural and intuitive way to construct simulation tasks while preserving the pedigree and authority of established parachute simulations. NASA currently employs four simulation tools for developing and analyzing air-drop tests performed by the CEV Parachute Assembly System (CPAS) Project. These tools were developed at different times, in different languages, and with different capabilities in mind. As a result, each tool has a distinct interface and set of inputs and outputs. However, regardless of the simulation code that is most appropriate for the type of test, engineers typically perform similar tasks for each drop test such as prediction of loads, assessment of altitude, and sequencing of disreefs or cut-aways. An object-oriented approach to simulation configuration allows the analyst to choose models of real physical test articles (parachutes, vehicles, etc.) and sequence them to achieve the desired test conditions. Once configured, these objects are translated into traditional input lists and processed by the legacy simulation codes. This approach minimizes the number of sim inputs that the engineer must track while configuring an input file. An object oriented approach to simulation output allows a common set of post-processing functions to perform routine tasks such as plotting and timeline generation with minimal sensitivity to the simulation that generated the data. Flight test data may also be translated into the common output class to simplify test reconstruction and analysis.

Moore, James W.↗

NASA NTRS1977

Effect of casing treatment of overall performance of axial-flow transonic fan stage with pressure ratio of 1.75 and tip solidity of 1.5

The effect of a number of casing treatments on the overall performance of a 1.75-pressure-ratio, 423-m/sec-tip-speed fan stage was evaluated. The skewed slot configuration with short-open slots over the midportion of the rotor had a stall margin of 23.5 percent, while the solid casing had a stall margin of 15.0 percent. The skewed slot configuration with long open slots extending ahead of and over portion of rotor displaced the stall line to the lowest flow at all speeds tested. At design speed, the peak efficiency for the long, forward open slots was 1 point less than that for the short midopen slots and 3 points less than that for the solid casing.

Osborn, W. M.↗

NASA NTRS1984

Observation of the impulse phase of a simple flare

The paper presents a broad range of complementary observations (SMM and ground-based) of the onset and impulsive phase of the fairly large (1B, M1.2) but simple two-ribbon flare which occurred at 19:15 UT on November 1, 1980 in the northern part of the active region Boulder No. AR2776. It is found that the overall magnetic field configuration in which the flare occurred was a fairly simple, closed arch containing nonpotential substructure; the flare occurred spontaneously within the arch (it was not triggered by emerging magnetic flux). The two major spikes of the impulsive energy release are examined, and the three immediate products of this energy release are discussed.

Tandberg-Hanssen, E.↗

NASA NTRS1974

Free-flying teleoperator for space missions

The design of a free-flying teleoperator (FFTO) intended to assist the Space Shuttle in performing its various missions is discussed, where FFTO is to be carried into earth orbit and returned to earth by the Shuttle. The FFTO system is described as to configuration, major subsystems, and mechanization concept. The kinematics of the manipulator and methods of sedating a satellite are discussed. Satellite equations of motion are provided, and cases of zero tumbling rate and non-zero tumbling rate are examined. Cases for which use of FFTO is compulsory are indicated, and the FFTO contributions to the Shuttle missions are analyzed.

Hung, J. C.↗

NASA NTRS2016

Non-Axisymmetric Inflatable Pressure Structure (NAIPS) Concept that Enables Mass Efficient Packageable Pressure Vessels with Sealable Openings

Achieving minimal launch volume and mass are always important for space missions, especially for deep space manned missions where the costs required to transport mass to the destination are high and volume in the payload shroud is limited. Pressure vessels are used for many purposes in space missions including habitats, airlocks, and tank farms for fuel or processed resources. A lucrative approach to minimize launch volume is to construct the pressure vessels from soft goods so that they can be compactly packaged for launch and then inflated en route or at the final destination. In addition, there is the potential to reduce system mass because the packaged pressure vessels are inherently robust to launch loads and do not need to be modified from their in-service configuration to survive the launch environment. A novel concept is presented herein, in which sealable openings or hatches into the pressure vessels can also be fabricated from soft goods. To accomplish this, the structural shape is designed to have large regions where one principal stress is near zero. The pressure vessel is also required to have an elongated geometry for applications such as airlocks.

Doggett, William R.↗

NASA NTRS2018

Status Report on Aeroelasticity in the Vehicle Development for X-57 Maxwell

Risk reduction is the objective of the X-57 Maxwell aeroelasticity team. The X-57, NASA’s experimental electric propulsion aircraft, has a long thin wing with primary propulsion systems located at the wing tips and high lift motors distributed along the span. Many of the classical aeroelastic concerns associated with such a configuration were addressed through early design decisions. The as-designed intermediate flight vehicle configurations show flutter mechanisms associated with flexible models of control surface systems –the stabilator, flaps and ailerons. Improvements to the analytical models, based on ground test data and project decisions about flight operations, show improved prospects of the vehicle being aeroelastically stable throughout the flight envelope. On-going ground testing and further analyses will lend credibility to the flutter predictions and vehicle safety.

Heeg, Jennifer↗

NASA NTRSDate not supplied

Structural Dynamics Observations in Space Launch System Green Run Hot Fire Testing

The Space Launch System (SLS) Core Stage (CS) Thrust Vector Control (TVC) system is comprised of eight mechanical feedback Shuttle heritage Type III TVC actuators and four RS-25 engines, each attached to a Shuttle heritage gimbal block/bearing. Two actuators are used to move each engine in two planes perpendicular to one another (i.e., pitch and yaw). The TVC system design leverages hardware from the Space Shuttle program as well as new hardware designed specifically for the Core Stage. The Green Run Hot Fire (GRHF) of the SLS Core Stage provided a flight-like ground test environment for verification of integrated vehicle TVC performance. A TVC model coupled to a vehicle structural dynamic model has been developed previously and incrementally validated in subsystem tests and simulations. Still, some aspects of TVC performance in GRHF were not anticipated. The ensuing investigation demonstrated the need for well-instrumented test environments, various levels of modeling fidelity, test-representative structural models, and caution in reuse of legacy components. This paper is the sixth installment in a seven-paper series surveying the design, engineering, test validation, and flight performance of the Core Stage Thrust Vector Control system. It introduces the salient structural dynamic phenomena uncovered in ambient and hot fire testing. During the Green Run test campaign, a comparison of ambient and hot fire step responses showed a significant change in apparent damping due to the presence of friction, challenging long standing assumptions that friction could be neglected. Additionally, the characteristic response of the engine and thrust structure during GRHF proved to be more complex than anticipated, as evidenced by the available actuator, thrust structure, and engine measurements. While the string-potentiometer based test instrumentation was intended to allow for reconstruction of the engine angles along the two control axes, the geometric placement, location uncertainty, and responses in overlapping frequency spectra revealed additional phenomena requiring further analysis and post-processing. The observations from both modal and frequency response testing during the Green Run ambient and hot fire configurations led to Engine and Core Stage FEM (finite element model) updates. When evidence of unexpected engine motion was found in engine section accelerometer data, the authors pursued additional structural analysis leading to FEM updates associated with the TVC gimbal and thrust structure. Through collaboration between structures, TVC, and flight control disciplines, the test-informed models and root-cause analysis led to confident flight rationale for the first flight of the SLS launch vehicle.

Richard Moore↗

NASA NTRSDate not supplied

Structural Dynamics Observations in Space Launch System Green Run Hot Fire Testing

The Space Launch System (SLS) Core Stage (CS) Thrust Vector Control (TVC) system is comprised of eight mechanical feedback Shuttle heritage Type III TVC actuators and four RS-25 engines, each attached to a Shuttle heritage gimbal block/bearing. Two actuators are used to move each engine in two planes perpendicular to one another (i.e., pitch and yaw). The TVC system design leverages hardware from the Space Shuttle program as well as new hardware designed specifically for the Core Stage. The Green Run Hot Fire (GRHF) of the SLS Core Stage provided a flight-like ground test environment for verification of integrated vehicle TVC performance. A TVC model coupled to a vehicle structural dynamic model has been developed previously and incrementally validated in subsystem tests and simulations. Still, some aspects of TVC performance in GRHF were not anticipated. The ensuing investigation demonstrated the need for well-instrumented test environments, various levels of modeling fidelity, test-representative structural models, and caution in reuse of legacy components. This paper is the sixth installment in a seven-paper series surveying the design, engineering, test validation, and flight performance of the Core Stage Thrust Vector Control system. It introduces the salient structural dynamic phenomena uncovered in ambient and hot fire testing. During the Green Run test campaign, a comparison of ambient and hot fire step responses showed a significant change in apparent damping due to the presence of friction, challenging long standing assumptions that friction could be neglected. Additionally, the characteristic response of the engine and thrust structure during GRHF proved to be more complex than anticipated, as evidenced by the available actuator, thrust structure, and engine measurements. While the string-potentiometer based test instrumentation was intended to allow for reconstruction of the engine angles along the two control axes, the geometric placement, location uncertainty, and responses in overlapping frequency spectra revealed additional phenomena requiring further analysis and post-processing. The observations from both modal and frequency response testing during the Green Run ambient and hot fire configurations led to Engine and Core Stage FEM (finite element model) updates. When evidence of unexpected engine motion was found in engine section accelerometer data, the authors pursued additional structural analysis leading to FEM updates associated with the TVC gimbal and thrust structure. Through collaboration between structures, TVC, and flight control disciplines, the test-informed models and root-cause analysis led to confident flight rationale for the first flight of the SLS launch vehicle.

Richard K. Moore↗

NASA NTRS2005

Fast Laser Shutters With Low Vibratory Disturbances

A prototype vacuum-compatible, fast-acting, long-life shutter unit that generates very little vibratory disturbance during switching is reviewed. This is one of a number of shutters designed to satisfy requirements specific to an experiment, to be performed aboard a spacecraft in flight, in which laser beams must be blocked rapidly and completely, without generating a vibratory disturbance large enough to adversely affect the power and frequency stability of the lasers. Commercial off-the-shelf laboratory shutter units -- typically containing electromagnet-coil-driven mechanisms -- were found not to satisfy the requirements because they are not vacuum-compatible, their actuators engage in uncompensated motions that generate significant vibrations, and their operational lifetimes are too short. Going beyond the initial outerspace application, the present vacuum-compatible, fast-acting, long-life shutter units could also be used in terrestrial settings in which there are requirements for their special characteristics. In designing these shutter units, unbalanced, electromagnetically driven mechanisms were replaced with balanced mechanisms that include commercial piezoelectric bending actuators. In each shutter unit, the piezoelectric bending actuators are configured symmetrically as opposing cantilever beams within a housing that contains integral mounts for lenses that focus a laser beam to a waist at the shutter location. In operation, the laser beam is blocked by titanium blades bonded near the free ends of the piezoelectric benders. The benders are driven by shaped electrical pulses with a maximum voltage differential of less than 60 V. Preliminary measurements indicate that rise and fall times are less than 1 ms.

Brinza, David↗

NASA NTRS1988

The Leading Edge 250: Oblique wing aircraft configuration project, volume 4

The design of a high speed transport aircraft using the oblique wing concept as a part of the High Speed Civil Transport (HSCT) aircraft study is the Leading Edge 250 capable of travelling at Mach 4 with 250 passengers and has a 6,500 nautical mile range. Its innovation lies within its use of the unconventional oblique wing to provide efficient flight at any Mach number. Wave drag is kept to a minimum at high speed, while high lift is attained during critical takeoff and landing maneuvers by varying the sweep of the wing.

Schmidt, Andre↗

NASA NTRS1975

Ultraviolet solar identifications based on extended absorption series observed in the laboratory spectrum of Si I

The absorption spectrum of Si I in the wavelength region between 1500 and 1900 A has been photographed at high resolution. The silicon vapor was produced in a 122-cm-long King furnace at 1800 to 2300 C. Forty-two Rydberg series have been observed from the ground state terms 3p(2)3P and 1D to terms associated with the 3pns and 3pnd configurations. All of the series from these configurations with J less than 4 have been extended with the 3pnd 3D(3) levels reaching n = 56. Numerous perturbations have been observed. This laboratory work has provided the basis for extending the identification of silicon lines in the solar spectrum. Nearly all lines found in the laboratory spectrum are also found in rocket spectrograms of the solar chromosphere. More than 300 lines have been attributed to Si I. The excellent correlation between laboratory and solar Si I lines is illustrated.

Moore, C. E.↗

NASA NTRS1990

Heat Shield And Axial Retainer For Turbopump Blade

Modified configuration for axial retention of blades of cryogenic turbopump expected to reduce dynamic and thermal stresses, thereby increasing operating life. Expected to overcome some of structural limitations in which various components of "fir-tree" blade/disk attachments shaped in such way as to concentrate stresses. Advantages include: No overhung loading on attachment faces of disk or blades; No additional stress concentrators added to attachment faces of disk or blades; and No large axial thermal gradients on edges of disk and blades.

Moore, Jerry H.↗

NASA NTRS1982

Study of the post-flare loops on 29 July 1973. IV - Revision of T and n sub e values and comparison with the flare of 21 May 1980

Revised temperature and density estimates are provided in a synthesis of previous studies of the two-ribbon solar flare of July 29, 1973 and results are compared with observations of a similar event by the Solar Maximum Mission on May 21, 1980. Photographs taken through X ray filters permitted determination of the spatial distribution of temperature and density in the loop system and variations over time. The entire growth process of the flare is detailed, including the magnetic field configurations and the enlargement of the Halpha flare ribbon separation distance. The temperature is revised to 8.8 million K during maximum soft X ray emission and 6.8 million K at the appearance of the last Halpha loops. The 1973 flare is noted to have occurred in an old, decaying spotless region, producing higher loops at lower density than the 1980 flare, which displayed ribbons imbedded in a sunspot group.

Svestka, Z.↗

NASA NTRS1989

Partial gravity habitat study: With application to lunar base design

Comprehensive design requirements associated with designing habitats for humans in a partial gravity environment were investigated and then applied to a lunar base design. Other potential sites for application include planetary surfaces such as Mars, variable gravity research facilities, or a rotating spacecraft. Design requirements for partial gravity environments include: (1) locomotion changes in less than normal Earth gravity; (2) facility design issues, such as interior configuration, module diameter and geometry; and (3) volumetric requirements based on the previous as well as psychological issues involved in prolonged isolation. For application to a Lunar Base, it was necessary to study the exterior architecture and configuration to insure optimum circulation patterns while providing dual egress. Radiation protection issues were addressed to provide a safe and healthy environment for the crew, and finally, the overall site was studied to locate all associated facilities in context with the habitat. Mission planning was not the purpose of this study; therefore, a Lockheed scenario was used as an outline for the Lunar Base application, which was then modified to meet the project needs.

Capps, Stephen↗

NASA NTRS1985

Topographic Evidence for Shield Volcanism on Io

A volcano was identified whose morphology, especially topography, supports and extends current evidence that shield volcanoes occur on Io. The feature is centered at 30 deg. S, 246 deg w and lies in a region near the terminator. The presence of shield volcanism on Io was inferred from the planimetric configuration of flaws on such features as Ra Patera. A central edifice roughly 40 to 50 km in diameter is situated on intervent plains material, and a broad, slightly elliptical base 75 to 90 km across. The size of this feature is comparable to large shield volcanoes found on Earth. In addition, the topography is similar to some terrestrial shield volcanoes that exhibit a change in slope; the steepening may be explained by shorter and/or thicker flows emplaced during late stage eruptions.

Albin, E. F.↗

NASA NTRS1982

Multibody transport concept

Two baseline aircraft are configured in this study. The multibody aircraft has two fuselage bodies located at approximately 28% wing semispan. The single-body aircraft is configured in such a way as to provide a reference base with which the multibody aircraft can be compared. The aircraft are sized to provide the lowest direct operating cost configuration when transporting 771,620 lbs. over a distance of 3,500 nautical miles at a cruise speed of Mach 0.80. The aircraft are assumed to operate in the years 1990-1995, thus allowing for the incorporation of those technologies expected to be mature and available for production usage in 1985. In comparison with the single-body aircraft, the two-body aircraft shows reductions of 8.9% in wing weight, 7.7% in structural weight, 13.5% in block fuel weight, and 11.3% in direct operating cost.

Moore, J. W.↗

NASA NTRS1976

Lightweight Long Life Heat Exchanger

A shuttle orbiter flight configuration aluminum heat exchanger was designed, fabricated, and tested. The heat exchanger utilized aluminum clad titanium composite parting sheets for protection against parting sheet pin hole corrosion. The heat exchanger, which is fully interchangeable with the shuttle condensing heat exchanger, includes slurpers (a means for removing condensed water from the downstream face of the heat exchanger), and both the core air passes and slurpers were hydrophilic coated to enhance wettability. The test program included performance tests which demonstrated the adequacy of the design and confirmed the predicted weight savings.

Moore, E. K.↗

NASA NTRS1995

NASA wide electronic publishing system: Electronic printing and duplicating. Stage 3 evaluation report

The report is presented in four sections: The Introduction describes the duplicating configuration under evaluation and the Background contains a chronological description of the evaluation segmented by phases 1 and 2. This section includes the evaluation schedule, printing and duplicating requirements, storage and communication requirements, electronic publishing system configuration, existing processes and proposed processes, billing rates, costs and productivity analysis, and the return on investment based upon the data gathered to date. The third section contains the phase 1 comparative cost and productivity analysis. This analysis demonstrated that LaRC should proceed with a 90-day evaluation of the DocuTech and follow with a phase 2 cycle to actually demonstrate that the proposed system would meet the needs of LaRC's printing and duplicating requirements, benchmark results, cost comparisons, benchmark observations, and recommendations. These are documented after the recommendations.

Tuey, Richard C.↗