Elucidating the Influence of Side-Chain Circular Distribution on the Crack Onset Strain and Hole Mobility of Near-Amorphous Indacenodithiophene Copolymers
Abstract not provided
Sommerville, Parker J.W.↗
SEARCH · Search NASA
Results for “morphological changes”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Shape Dependence of Pressure-Induced Phase Transition in CdS Semiconductor Nanocrystals
Understanding structural stability and phase transformation of nanoparticles under high pressure is of great scientific interest, as it is one of the crucial factors for design, synthesis, and application of materials. Even though high-pressure research on nanomaterials has been widely conducted, their shape-dependent phase transition behavior still remains unclear. Examples of phase transitions of CdS nanoparticles are very limited, despite the fact that it is one of the most studied wide band gap semiconductors. Here we have employed in-situ synchrotron wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM) to investigate the high-pressure behaviors of CdS nanoparticles as a function of particle shapes. We observed that CdS nanoparticles transform from wurtzite to rocksalt phase at elevated pressure in comparison to their bulk counterpart. Phase transitions also vary with particle shape—rod-shaped particles show a partially reversible phase transition and the onset of the structural phase transition pressure decreases with decreasing surface-to-volume ratios, while spherical particles undergo irreversible phase transition with relatively low phase transition pressure. Additionally, TEM images of spherical particles exhibited sintering-induced morphology change after high-pressure compression. Calculations of the bulk modulus reveals that spheres are more compressible than rods in the wurtzite phase. These results indicate that the shape of the particle plays an important role in determining their high-pressure properties. Our study provides important insights into understanding of the phase-structure-property relationship, guiding future design and synthesis of nanoparticles for promising applications.
36 MATERIALS SCIENCE↗
Acetaminophen Interactions with Phospholipid Vesicles Induced Changes in Morphology and Lipid Dynamics
Not Available
59 BASIC BIOLOGICAL SCIENCES↗
Phase evolution and morphology in Cu-In-Ga sputtered precursors
The reaction of metallic precursors has become the primary method of industrial manufacturing for Cu(In,Ga)Se2. Commonly used Cu3Ga sputter targets have thus far dictated that the relative Ga composition of these precursors is Ga/(In+Ga) ≈ 0.25. Cu-In-Ga precursors are prepared with varying DC sputtering conditions and Ga compositions ranging from 0 ≤ Ga/(In+Ga) ≤ 0.75. The phase evolution and morphology of these precursors is characterized using x-ray diffraction (XRD) and scanning electron microscopy, including in situ annealing of precursors during XRD measurements. It is observed that the Ga composition of as-deposited precursors affects phase evolution with annealing. Consistent morphology changes were not observed with changing Ga, however, film morphology was controlled by adjusting In sputter conditions.
Lam, Isaac K. (ORCID:0000000198002765)↗
Utilization of the critic subnetwork of a generative adversarial network as detector of morphological material change in image data.
Abstract not provided.
Beste, Ariana↗
Remote sensing of changes in morphology and physiology of trees under stress
Results of continuing studies of forest trees subjected to varying types of stress are reported. Both greenhouse and field studies are included. Greenhouse work with tree seedlings exposed to varying levels of NaCl and CaCl2 in the soil indicated that, in the initial stages, palisade cells shrink and the amount of air space in the leaf increases. As the severity of damage increases, the cells of the spongy mesophyll shrink and flatten, and the amount of air space in the leaf decreases. Statistical analysis of foliar reflectance and associated moisture content data led to a series of regression equations for predicting foliar moisture content from reflectance data. Equations were calculated for three species, yellow birch (Betula alleghaniensis Britton), sugar maple (Acer saccharum Marsh.) and white ash (Fraxinus americana L.) having multiple correlation coefficients of 0.98, 0.94 and 0.93 respectively. Interpretation of multispectral imagery of the Ann Arbor Forestry Test Site (NASA Site 190) provided evidence that infections of Fomes annosus can be detected in the early stages. Infections of two needle cast diseases were also detected in conifer plantations in the test site. A study of automatic interpretation of multispectral scanner imagery for tree species recognition provided encouraging results.
Olson, C. E., Jr.↗
Remote sensing of changes in morphology and physiology of trees under stress
Measurements on foliage samples collected from several drought and salt treated plants revealed that leaf thickness decreased with increasing severity of the drought treatment and increased with increasing severity of treatment with NaCl, but remained essentially unaffected by treatment with CaCl2. Airborne data collected by multispectral scanner indicated that false color images provide selective enhancement of a diseased area. Comparison of simulated and actual aerial color and color IR photography revealed that the color renditions of the MSS simulations agreed closely with those of the actual photography.
Olson, C. E., Jr.↗
Remote sensing of changes in morphology and physiology of trees under stress
Previsual detection of Fomes annosus in pine plantations was studied. Detailed analyses of photographic imagery obtained over the Ann Arbor Test Site during 1969 and 1970 reveal that the Ektachrome Infrared film was superior to Ektachrome Aerographic, Infrared Aerographic, or Plus-X Aerographic films for detecting Fomes annosus damage. Of far more significance in controlling the accuracy of damage detection, however, was the experience of the photo interpreter. Ratio-processing of multispectral scanner data was investigated with data collected in June of 1970 and in June of 1972. Ratioing of the 1.5-1.8 and 1.0-1.4 micrometer channels gave good results at detecting openings in the crown canopy and adjacent infected trees. Combined level slicing of the 1.5-1.8 micrometer channel and the 1.5-1.8 to 1.0-1.4 micrometer ratio permitted separation and recognition of forest litter in the openings and stressed trees adjacent ot the openings.
Olson, C. F., Jr.↗
A strongly changing accretion morphology during the outburst decay of the neutron star X-ray binary 4U 1608−52
Explore the source record for details and available documents.
J van den Eijnden↗
3D Scanning System to Assess Gravity-Dependent Body Shape Changes
The human body shows unique morphological changes when exposed to different gravity conditions, including muscle atrophy, fluid shift, and spinal elongation. Such changes need to be incorporated for human-system integration in the vehicle habitat, garment, and spacesuit designs, as inaccurate body measurements can result in suboptimal crew protection that can potentially decrease injury tolerance. However, measurement tools have not been available for accurate assessments of body shape changes. This work aimed to develop a prototype 3-D body scanning system with the configuration and performance optimized for in-flight crewmember body scanning. A scan hardware system was developed using Intel RealSense commercial off-the-shelf 3D sensors. The sensor parameters were iteratively optimized and tested to obtain the performance level needed for body scanning. A scan booth structure was fabricated, with the overall size 4 x 4 x 8 feet. The specific number of sensors and mounting positions were determined by iterative simulations, which indicated that 16 cameras can capture 94% and 96% of body surface area from the 1st percentile female and 99th percentile male crew population subject. The mounted sensors were linked through a mix of USB-C and USB-3 cables and operated for data acquisition from a Linux laptop computer. A software prototype was developed using Python and Tkinter graphical user interface toolkit. A calibration procedure was also built using a panel of QR codes. A computer vision tool detected and decoded the unique ID and pattern locations of the QR codes. The calibration information determined the position and orientation of the 3D sensors with respect to each other. The scanner performance was assessed using a set of 3D printed custom manikins. The manikin size and shape were derived from the previous ISS study, which measured the crewmembers’ anthropometry changes across the different flight phases. The average anthropometric measurements at the pre-flight and flight day 15 were sampled and projected onto the 1st percentile female and 99th percentile male body shapes. Another pair of manikins were also 3D printed to simulate the neutral body posture, estimated from ISS microgravity environments. A preliminary analysis assessed the performance of the newly developed scanner against the reference scanner, which has been used at the NASA JSC for crew and test subject anthropometry. Although the new scanner data showed several artifacts and missing geometries in the occluded body areas such as armpits and crotch, overall shape matched with the reference scan. When the manikin surface coordinates were compared, a root mean square error of 1.3 cm was observed from the manikin torso segment. Linear measurements including the stature, knee height and circumference measurements at the chest and calf showed differences from the reference scan measurements, ranging between 0.3 and 0.9 cm. Overall, this work demonstrated a development framework for an in-flight scanner with design and operation optimized for crewmember body scanning. Further improvement can potentially provide previously unavailable anthropometric data from different gravitational environments, including 0-g, 1/6-g, and 1-g. Such data can improve suit fit, habitat design, exercise efficacy quantification and sizing of orthostatic intolerance garments.
K H Kim↗
Molecular imaging of plant-microbe interactions on the Brachypodium seed surface
Plant growth-promoting rhizobacteria (PGPR) play a crucial role in biological control and pathogenic defense on and with-in plant tissues, however the mechanism(s) by which plants associate with PGPR to elicit such beneficial effects needs further study. Here, we present high mass resolution time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging of Brachypodium distachyon (Brachypodium) seeds with and without exposure to two model PGPR, i.e., Gram-negative Pseudomonas fluorescens SBW25::GFP (P.) and Gram-positive Arthrobacter chlorophenolicus A6::GFP (A.). Delayed image extraction was used to image PGPB-treated seed sections to reveal morphological changes. ToF-SIMS spectral compari-son, principal component analysis (PCA), and two-dimensional (2D) imaging show that the selected PGPR have different effects on the host seed surface, resulting in changes in chemical composition and morphology. Metabolite prod-ucts and biomarkers, such as flavonoids, phenolic com-pounds, fatty acids, and indole-3-acetic acid (IAA), were ob-served on the PGPR-treated seed surfaces. These compounds had different distributions on the Brachypodium seed surface for the two PGPR, indicating that the different bacteria elicited distinct responses from the host. Our results illustrate that ToF-SIMS is an effective tool to study plant-microbe interac-tions and to provide insightful information with submicrome-ter lateral resolution of the chemical distributions associated with morphological features, potentially offering a new way to study the mechanisms underlying beneficial roles of PGPR.
PGPR, Brachypodium distachyon, ToF-SIMS, metabolit↗
Effect of lateral accelerations on dog kidney histology
Injuries to vascular system and degenerative changes in renal tubules as morphological changes in dog kidney histology caused by lateral accelerations
DOG↗
3D Scanning System to Assess Gravity-Dependent Body Shape Changes
The human body shows unique physiological and morphological changes when exposed to different gravity conditions, including muscle atrophy, fluid shift, spinal elongation, and body posture adjustments. Such changes need to be incorporated for human-system integration in the vehicle habitat, garment, and spacesuit designs, as inaccurate body measurements can result in suboptimal crew protection that can potentially decrease injury tolerance. However, the traditional linear measurements, such as stature, segment lengths or circumferences measured using a caliper or tape measure, often show limited consistency and are unable to capture the nonlinear characteristics of the human body. While 3D body scanning can provide significant advantages over linear measurements, the technologies have not been fully developed or customized for in-flight scanning. For ground laboratory use, several different scanner types are commercially available. However, in-flight scanning requires additional technical considerations, such as minimal scan time, simplified calibration, and sufficient capture volume. This work aims to develop a prototype 3-D body scanning system that is customized for in-flight use to scan crewmembers, with the configuration and performance optimized for detecting known gravity-dependent body shape and posture changes. A hardware system will be custom built using a network of commercial off-the-shelf 3D sensors. The sensor parameters and settings will be optimized to detect the targeted body shape changes, specifically using body manikins of which the shape and size are iteratively permuted to simulate the known changes by fluid shift and spinal elongation. The capture volume will be also matched for a range of body sizes from a 1st percentile female to 99th percentile male. Unintentional body motions or floating in microgravity will be also simulated and incorporated. A data acquisition software will be developed for efficient in-flight operations with minimal overhead and easy-to-use user interface. A simplified calibration procedure will be designed for robust scanning against frequent vibration or unexpected sensor position shifts. The system will be tested in the ground laboratory for accuracy and reliability against a reference scanning system. New anthropometry measurements will be also identified to sensitively capture the gravity dependent body shape changes, in addition to the traditional anthropometry measurements. A novel landmark-based technique will be tested for consistent anthropometry measurements across posture variations. If successfully developed and deployed, the new system is expected to provide previously unavailable body shape and size data from different gravitational environments, including 0-g, 1/6-g, and 1-g. Such data can improve suit fit, habitat design, exercise efficacy quantification and sizing of orthostatic intolerance garments.
K H Kim↗
3D Scanning System to Assess Gravity-Dependent Body Shape Changes
The human body shows unique physiological and morphological changes when exposed to different gravity conditions, including muscle atrophy, fluid shift, spinal elongation, and body posture adjustments. Such changes need to be incorporated for human-system integration in the vehicle habitat, garment, and spacesuit designs, as inaccurate body measurements can result in suboptimal crew protection that can potentially decrease injury tolerance. However, the traditional linear measurements, such as stature, segment lengths or circumferences measured using a caliper or tape measure, often show limited consistency and are unable to capture the nonlinear characteristics of the human body. While 3D body scanning can provide significant advantages over linear measurements, the technologies have not been fully developed or customized for in-flight scanning. For ground laboratory use, several different scanner types are commercially available. However, in-flight scanning requires additional technical considerations, such as minimal scan time, simplified calibration, and sufficient capture volume. This work aims to develop a prototype 3-D body scanning system that is customized for in-flight use to scan crewmembers, with the configuration and performance optimized for detecting known gravity-dependent body shape and posture changes. A hardware system will be custom built using a network of commercial off-the-shelf 3D sensors. The sensor parameters and settings will be optimized to detect the targeted body shape changes, specifically using body manikins of which the shape and size are iteratively permuted to simulate the known changes by fluid shift and spinal elongation. The capture volume will be also matched for a range of body sizes from a 1st percentile female to 99th percentile male. Unintentional body motions or floating in microgravity will be also simulated and incorporated. A data acquisition software will be developed for efficient in-flight operations with minimal overhead and easy-to-use user interface. A simplified calibration procedure will be designed for robust scanning against frequent vibration or unexpected sensor position shifts. The system will be tested in the ground laboratory for accuracy and reliability against a reference scanning system. New anthropometry measurements will be also identified to sensitively capture the gravity dependent body shape changes, in addition to the traditional anthropometry measurements. A novel landmark-based technique will be tested for consistent anthropometry measurements across posture variations. If successfully developed and deployed, the new system is expected to provide previously unavailable body shape and size data from different gravitational environments, including 0-g, 1/6-g, and 1-g. Such data can improve suit fit, habitat design, exercise efficacy quantification and sizing of orthostatic intolerance garments.
K H Kim↗
Advanced Laser Processing of Materials--Fundamentals and Applications
Preparation of amorphous thin films in semiconductors and their transition to the crystalline phase may apply to switching devices. Surfaces of single crystal samples of bulk In2Se3 and thin films of InSe were treated using an excimer laser, and microscopic examination showed the treated portions of the surface had become amorphous. Film samples of InSe were laser-treated like the bulk samples. Examination of these treated flims showed shifts in the optical transmittance spectra as well as surface morphology changes.
amorphous thin films semiconductors crystalline ph↗
Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions
Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.
36 MATERIALS SCIENCE↗
Decoupling Li out-diffusion and surface diffusion in the lithiation-assisted epitaxial growth of lithium tungstate
Lithiation-assisted epitaxy offers a flexible and robust approach for synthesizing high-quality Li-containing materials and interfaces with precise control. Here, in this study, we use lithium tungstate (Li x WO 3+x/2 , where x = 0 to 2) as a model system to investigate the intertwined effects of Li out-diffusion-induced compositional changes and surface-diffusion-induced morphological changes. By systematically varying synthesis and processing conditions, we uncover their impact on lithium tungstate film formation. Comprehensive characterizations, including X-ray diffraction, atomic force microscopy, X-ray photoemission spectroscopy and time-of-flight secondary ion mass spectrometry, reveal that low-temperature growth (< 300 °C) followed by high-temperature annealing yields continuous lithium tungstate films with significantly reduced surface roughness. In contrast, high-temperature deposition (≥ 300 °C) accelerates surface diffusion and Li out-diffusion, leading to island formation. Furthermore, in situ scanning transmission electron microscopy demonstrates the beam sensitivity of Li 2 WO 4 and reveals a phase transition from Li 2 WO 4 to LiWO 3.5 under prolonged electron beam exposure. These findings deepen our understanding of how to control composition and morphology of Li-containing films, providing valuable insights for the design and integration of energy materials.
Shi, Jueli [Pacific Northwest National Laboratory ↗
Structural Transformation and Degradation of Cu Oxide Nanocatalysts during Electrochemical CO 2 Reduction
The electrochemical CO 2 reduction reaction (CO 2 RR) holds enormous potential as a carbon-neutral route to the sustainable production of fuels and platform chemicals. The durability for long-term operation is currently inadequate for commercialization, however, and the underlying deactivation process remains elusive. A fundamental understanding of the degradation mechanism of electrocatalysts, which can dictate the overall device performance, is needed. In this work, we report the structural dynamics and degradation pathway of Cu oxide nanoparticles (CuO x NPs) during the CO 2 RR by using in situ small-angle X-ray scattering (SAXS) and X-ray absorption spectroscopy (XAS). The in situ SAXS reveals a reduction in the size of NPs when subjected to a potential at which no reaction products are detected. At potentials where the CO 2 RR starts to occur, CuO x NPs are agglomerated through a particle migration and coalescence process in the early stage of the reaction, followed by Ostwald ripening (OR) as the dominant degradation mechanism for the remainder of the reaction. As the applied potential becomes more negative, the OR process becomes more dominant, and for the most negative applied potential, OR dominates for the entire reaction time. The morphological changes are linked to a gradual decrease in the formation rate for multicarbon products (C 2 H 4 and ethanol). Other reaction parameters, including reaction intermediates and local high pH, induce changes in the agglomeration process and final morphology of the CuO x NPs electrode, supported by post-mortem ex situ microscopic analysis. The in situ XAS analysis suggests that the CuO x NPs reduced into the metallic state before the structural transformation was observed. The introduction of high surface area carbon supports with ionomer coating mitigates the degree of structural transformation and detachment of the CuO x NPs electrode. These findings show the dynamic nature of Cu nanocatalysts during the CO 2 RR and can serve as a rational guideline toward a stable catalyst system under electrochemical conditions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗