Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiferroic coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Room temperature magnetoelectric coupling in BaTi{sub 1−x}Cr{sub x}O{sub 3} multiferroic thin films

We report on room temperature (RT) magnetoelectric coupling in tetragonal BaTi{sub 1−x}Cr{sub x}O{sub 3} thin film multiferroics (BTCO) sputter deposited on (100) SrTiO{sub 3} (where x = 0.005, 0.01, 0.02, and 0.03). As-deposited thin films are vacuum annealed by electron beam rapid thermal annealing technique. 50 nm thick BTCO with “x = 0.01” shows RT ferromagnetic and ferroelectric response with saturation magnetic moment of 1120 emu/cc and polarization of 14.7 microcoulomb/cm{sup 2}. Piezoresponse/magnetic force microscope images shows RT magnetoelectric coupling in BTCO with “x = 0.01,” which is confirmed using magnetocapacitance measurement where an increase in capacitance from 17.5 pF to 18.4 pF is observed with an applied magnetic field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetoelectric Composites: Applications, Coupling Mechanisms, and Future Directions

Multiferroic (MF)-magnetoelectric (ME) composites, which integrate magnetic and ferroelectric materials, exhibit a higher operational temperature (above room temperature) and superior (several orders of magnitude) ME coupling when compared to single-phase multiferroic materials. Room temperature control and the switching of magnetic properties via an electric field and electrical properties by a magnetic field has motivated research towards the goal of realizing ultralow power and multifunctional nano (micro) electronic devices. Here, some of the leading applications for magnetoelectric composites are reviewed, and the mechanisms and nature of ME coupling in artificial composite systems are discussed. Ways to enhance the ME coupling and other physical properties are also demonstrated. Finally, emphasis is given to the important open questions and future directions in this field, where new breakthroughs could have a significant impact in transforming scientific discoveries to practical device applications, which can be well-controlled both magnetically and electrically.

36 MATERIALS SCIENCE↗

Determination of the magnetoelectric coupling coefficient from temperature dependences of the dielectric permittivity for multiferroic ceramics Bi{sub 5}Ti{sub 3}FeO{sub 15}

In the multiferroic materials, the dielectric and magnetic properties are closely correlated through the coupling interaction between the ferroelectric and magnetic order. We attempted to determine the magnetoelectric coupling coefficient from the temperature dependences of the dielectric permittivity for multiferroic Bi{sub 5}Ti{sub 3}FeO{sub 15}. Multiferroic ceramics Bi{sub 5}Ti{sub 3}FeO{sub 15} belong to materials of the Aurivillius-type structure. Multiferroic ceramics Bi{sub 5}Ti{sub 3}FeO{sub 15} was synthesized via sintering the Bi{sub 2}O{sub 3} and Fe{sub 2}O{sub 3} mixture and TiO{sub 2} oxides. The precursor material was ground in a high-energy attritorial mill for 5 hours. This material was obtained by a solid-state reaction process at T = 1313 K. We investigated the temperature dependences of the dielectric permittivity for the different frequencies. From the dielectric measurements, we determined the temperature of phase transition of the ferroelectric-to-paraelectric type at about 1013 K. Based on dielectric measurements and theoretical considerations, the values of the magnetoelectric coupling coefficient were specified.

36 MATERIALS SCIENCE↗

Brillouin light scattering study of transverse mode coupling in confined yttrium iron garnet/barium strontium titanate multiferroic

Using the space-resolved Brillouin light scattering spectroscopy we study the transformation of dynamic magnetization patterns in a bilayer multiferroic structure. We show that in the comparison with a single yttrium iron garnet (YIG) film magnetization distribution is transformed in the bilayer structure due to the coupling of waves propagating both in an YIG film (magnetic layer) and in a barium strontium titanate slab (ferroelectric layer). We present a simple electrodynamic model using the numerical finite element method to show the transformation of eigenmode spectrum of confined multiferroic. In particular, we demonstrate that the control over the dynamic magnetization and the transformation of spatial profiles of transverse modes in magnetic film of the bilayer structure can be performed by the tuning of the wavevectors of transverse modes. The studied confined multiferroic stripe can be utilized for fabrication of integrated dual tunable functional devices for magnonic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and polaronic excitation in FeVO{sub 4}

We investigated the electronic properties of FeVO{sub 4} films using optical, valence band x-ray photoelectron, and infrared spectroscopies. These studies show that FeVO{sub 4} is a direct bandgap system with a 2.7 eV gap with the Fermi level in the middle of the valence band maximum and conduction band minimum. A polaronic excitation is also observed in the middle infrared, indicating the importance of charge-lattice coupling in this multiferroic material. Fits to a model for the optical response of large polarons yield a binding energy of approximately 130 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ scanning probe microscopy studies of cross-coupled domains and domain walls. Final technical report

The objective of this project is to explore the nanoscale emergent phenomena and to understand the unconventional properties of cross-coupled domains and domain walls in multiferroics, where both ferroelectricity and magnetism coexist. The giant magnetoelectric effect due to coupled ferroic orders in multiferroics is of both fundamental and technological interest and is promising for energy-efficient multifunctional applications. The presence of domains and domain walls is a distinguishing feature of any ferroic order; their responses to external stimuli determine the macroscopic properties and the functionalities of ferroic materials. To address the challenges and to directly visualize the cross-coupled domains and domain walls and their responses to the applied electric and magnetic fields, this project will develop a unique, high-resolution and high-sensitivity in situ scanning force microscopy (SFM). The real space imaging of domains and domain walls by SFM aims to fundamentally understand the nature of magnetoelectric cross-coupling in representative multiferroic and magnetoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using interfaces to: create strongly-coupled magnetic-ferroelectrics

Starting at the level of electrons and atoms our long-term goal is to rationally design complex oxide heterostructures and interface-materials with targeted emergent behaviors. This is not a matter of simply optimizing material parameters, but rather begins with understanding a mechanism to control the interplay between the diverse microscopic degrees of freedom prevalent in complex oxides in order to create targeted macroscopic phenomena and ends with the design of new material realizations. These realizations are in turn created with atomic-layer precision, structurally assessed to see that they are the intended realization, and finally their relevant properties are measured. During this program we have developed the scientific ideas necessary to apply this materials-by-design paradigm to the creation of materials offering electrical control of magnetism. At the heart of our approach lies a partnership between theory, synthesis, and characterization. These are the areas of expertise of the three co-PIs, who have worked closely together since their arrival at Cornell. During this project bold ideas on where to put the atoms to provide electrical control of magnetism were met with the latest methods of synthesis science and electron microscopy in an attempt create targeted new multiferroics. Our work applying this materials-by-design methodology to multiferroics has enjoyed multiple successes. The Co-PIs have invented new mechanisms for multiferroics, which provide strong coupling between polarization and magnetism, and reduced them to practice. Specifically, we pioneered multiferroics based on spin-phonon coupling, rotation-driven multiferroicity, and novel geometric multiferroics. Importantly, the latter two of these mechanisms enable the deterministic switching of magnetism by an applied electric field, which is key to the application of multiferroics to future device technologies. Most recently, we performed detailed theoretical analysis on a system involving the combination of magnetoelectric and colossal magnetoresistance behaviors and predict that electrical control of a metal-insulator transition is possible in appropriately strained SmBaMn2O6. The research enabled by this grant led to 63 publications in leading refereed journals including Nature, Nature Materials, Physical Review Letters, and Advanced Materials demonstrating a materials-by-design paradigm to the creation of materials offering electrical control of magnetism.

36 MATERIALS SCIENCE↗

Interband electronic transitions and phase transformation of multiferroic Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ceramics revealed by temperature-dependent spectroscopic ellipsometry

Optical properties and phase transition of Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} (BLFTO) ceramics with different composition (0.02 ≤ x ≤ 0.10, 0.01 ≤ y ≤ 0.06) have been investigated by spectroscopic ellipsometry (SE) in the temperature range of −70–450 °C. The real part of the complex dielectric function ε{sub 1} increases with the temperature. Meanwhile, the imaginary part ε{sub 2} in the low-energy region decreases with the temperature and has an opposite trend in the high-energy side. Four typical interband transitions (E{sub a} ∼ 2.50 eV, E{sub b} ∼ 2.70 eV, E{sub c} ∼ 3.60 eV, and E{sub d} ∼ 4.25 eV) can be observed from the second derivative of the complex dielectric functions with aid of the standard critical point model. The critical point (CP) transition becomes broadening and shifts to a lower energy side as La and Ti compositions increase. Moreover, the CP transition energies show a red-shift trend with increasing the temperature until 320 °C, due to the lattice thermal expansion and electron-phonon interaction. The typical interband transitions and partial spectral weight present anomalies in the proximity of antiferromagnetic transition owing to the coupling between magnetic and ferroelectric order parameters and spin-lattice coupling for BLFTO multiferroic materials. It was found that the Néel temperature of BLFTO ceramics decreases from 364 to 349 °C with increasing doping composition of La and Ti elements. These phenomena can be attributed to the modification of electronic structure and magnetic order because the differences of electronegativity and ionic radii between Bi and La, Fe and Ti induce the variations on the bond angle and bond length between cations and anions. Moreover, the substitution for magnetic Fe{sup 3+} ions with nonmagnetic Ti{sup 4+} ions can reduce the exchange interaction between adjacent magnetic moments. Therefore, SE technique can be sensitive for detecting the phase/structural transitions of multiferroic oxides.

36 MATERIALS SCIENCE↗

Magnetic Structure of Multiferroic BiFeO3 Film with Engineered Ferroelectric Domains

We report on neutron scattering and piezoresponse force microscopy studies of multiferroic BiFeO{sub 3} films epitaxially grown on vicinal SrTiO{sub 3} substrates. We find that these BiFeO{sub 3} films exhibit a G-type antiferromagnetic structure modulated with cycloidal spiral magnetic ordering with the features of magnetic domains depending upon the ferroelectric domain states: a single antiferromagnetic domain for the films with a ferroelectric monodomain while two- or multiantiferromagnetic domains existing in the films displaying two- or four-ferroelectric variants, respectively. These results imply the correlation between ferroelectric and magnetic order parameters in the BiFeO{sub 3} films and the expected strong magnetoelectric coupling makes these multiferroic films promising candidates for device applications with the capability to tune the magnetism using an electric field.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Symmetries and multiferroic properties of novel room-temperature magnetoelectrics: Lead iron tantalate – lead zirconate titanate (PFT/PZT)

Mixing 60-70% lead zirconate titanate with 40-30% lead iron tantalate produces a single-phase, low-loss, room-temperature multiferroic with magnetoelectric coupling: (PbZr₀.₅₃Ti₀.₄₇O₃) (1-x) - (PbFe₀.₅Ta₀.₅O₃) x . The present study combines x-ray scattering, magnetic and polarization hysteresis in both phases, plus a second-order dielectric divergence (to epsilon = 6000 at 475 K for 0.4 PFT; to 4000 at 520 K for 0.3 PFT) for an unambiguous assignment as a C 2v -C 4v (Pmm2-P4mm) transition. The material exhibits square saturated magnetic hysteresis loops with 0.1 emu/g at 295 K and saturation polarization Pr = 25 μC/cm², which actually increases (to 40 μC/cm²) in the high-T tetragonal phase, representing an exciting new room temperature oxide multiferroic to compete with BiFeO₃. Additional transitions at high temperatures (cubic at T>1300 K) and low temperatures (rhombohedral or monoclinic at T<250 K) are found. These are the lowest-loss room-temperature multiferroics known, which is a great advantage for magnetoelectric devices.

36 MATERIALS SCIENCE↗

Target Configuration Effect on Microstructures and Properties of Vertically Aligned Nanocomposites

Vertically aligned nanocomposites (VANs) are unique thin films with vertical nanostructures embedded in a matrix material, allowing for the integration of two distinct materials. These nanocomposites offer novel combined physical properties, such as nanocomposite-based multiferroics and strongly coupled physical properties, such as magneto-optic coupling. Much work has been conducted in exploring different two-phase combinations and various processing conditions to achieve novel tunable properties that cannot be obtained by any single-phase material alone. Here, in this work, the target configuration effects are explored for the growth of LaFeO 3 –CoNi 2 O 4 VANs. Both mixed and pie-shaped targets are utilized to compare the target configuration effects on the phase separation, morphology tuning, and their resulting physical properties, including optical and magnetic properties. This work suggests that the target configuration is another important parameter for achieving the desired VAN morphology and can be used to design different two-phase VANs with tailorable properties.

36 MATERIALS SCIENCE↗

Engineering exchange bias at the interface of self-polarized ultrathin ferroelectric Ba⁢Ti⁢O 3 and ferromagnetic La 0.67⁢ Sr 0.33 ⁢Mn⁢O 3

We investigate the emergence and optimization of conventional exchange bias (EB) in ultrathin (<10 nm) ferroelectric (FE) Ba⁢Ti⁢O 3 (BTO)/ferromagnetic (FM) La 0.67 ⁢Sr 0.33⁢ Mn⁢O 3 (LSMO) epitaxial bilayers without an antiferromagnetic (AFM) material. The EB originates from the electronic orbital reconstruction at the FE-FM interface due to the ferroelectric polarization. We achieve maximum EB of approximately 42 Oe with single-domain polarization in nine-unit-cell-thick BTO, setting the BTO thickness above the critical threshold for ferroelectricity yet below the thickness of strain relaxation and multidomain breakdown. Furthermore, the LSMO layer needs to be thick enough to sustain both the FM layer and polarization-induced AFM spin configuration at the LSMO/BTO interface, yet as thin as possible to enable the EB loop shift. The temperature, training, field, and thickness dependence of the EB confirm that the LSMO/BTO interface exhibits conventional EB despite its unconventional origin. Using x-ray magnetic circular dichroism, scanning transmission electron microscopy, and density-functional-theory calculations, we confirm that the macroscopic EB effect originates from the interfacial AFM spin configuration in LSMO driven by FE-induced d-orbital modifications in interfacial Mn ions. Thus, we engineer strong interfacial EB coupling in artificial multiferroics without a conventional AFM material by controlling FE polarization, highlighting the potential for advanced spintronic applications.

exchange bias↗

Origin of spin-driven ferroelectricity and effect of external pressure on the complex magnetism of the 6⁢ H perovskite Ba 3 ⁢Ho⁢Ru 2⁢ O 9

The compound Ba 3 HoRu 2 O 9 magnetically orders at 50 K (T N1 ), followed by another complex magnetic ordering at 10.2 K (T N2 ). The second magnetic phase transition was characterized by the coexistence of two competing magnetic ground states associated with two different magnetic wave vectors (K 1 = 0.5 0 0 and K 2 = 0.25 0.25 0). The multiferroicity and magnetoelectric coupling were predicted below T N2 in these 4d-based materials. Here, in this work, we have discussed the origin of spin-driven ferroelectricity, which is not known yet, and the nature of magnetoelectric domains. We have investigated the compound through time-of-flight neutron diffraction, synchrotron x-ray diffraction (XRD), ac susceptibility, frequency-dependent complex dielectric spectroscopy, and dc magnetization under external pressure. We have demonstrated that the noncollinear structure involving two different magnetic ions, Ru (4d) and Ho (4f), breaks the spatial inversion symmetry via inverse Dzyaloshinskii-Moriya (DM) interaction through strong 4d-4f magnetic correlation, which shifts the oxygen atoms and results in nonzero polarization. Such an observation of inverse DM interaction from two different magnetic ions which cause ferroelectricity is rarely observed. The stronger spin-orbit coupling of 4d orbital might play a major role in creating DM interaction of noncollinear spins. We have systematically studied the spin and dipolar dynamics, which exhibit intriguing behavior with shorter coherence lengths of second magnetic phase associated with the k 2 wave vector. The results manifest the development of finite-size magnetoelectric domains instead of true long-range ordering, which justifies the experimentally obtained low value of ferroelectric polarization. The lattice parameters and volume show a sharp anomaly at T N2 obtained by analyzing the temperature-dependence XRD, which is consistent with the ferroelectric transition, predicting a noncentrosymmetric space group, $P\bar{6}2c$, for this compound. Furthermore, we have investigated the effect of external pressure on this complex magnetism. The result reveals an enhancement of ordering temperature by the application of external pressure (~1.6 K/GPa). The external pressure might favor stabilizing the magnetic ground state associated with second magnetic phase. Our study shows an unconventional mechanism of spin-driven ferroelectricity involving inverse DM interaction between Ru (4d) and Ho (4f) magnetic ions due to strong 4d-4f cross coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron inelastic scattering measurements of low-energy phonons in the multiferroic BiFeO 3

In this study, we present neutron inelastic scattering measurements of the low-energy phonons in single crystal BiFeO 3 . The dispersions of the three acoustic phonon modes (LA along [100], TA 1 along [010], and TA 2 along [110]) and two low-energy optic phonon modes (LO and TO 1 ) have been mapped out between 300 and 700 K. Elastic constants are extracted from the phonon measurements. The energy linewidths of both TA phonons at the zone boundary clearly broaden when the system is warmed toward the magnetic ordering temperature T N =640 K. In conclusion, this suggests that the magnetic order and low-energy lattice dynamics in this multiferroic material are coupled.

36 MATERIALS SCIENCE↗

Ultrafast control and monitoring of material properties using terahertz pulses

These are a set of slides on ultrafast control and monitoring of material properties using terahertz pulses. A few of the topics covered in these slides are: How fast is a femtosecond (fs), Different frequencies probe different properties of molecules or solids, What can a THz pulse do to a material, Ultrafast spectroscopy, Generating and measuring ultrashort THz pulses, Tracking ultrafast spin dynamics in antiferromagnets through spin wave resonances, Coherent two-dimensional THz spectroscopy, and Probing vibrational dynamics at a surface. Conclusions are: Coherent two-dimensional THz spectroscopy: a powerful approach for studying coherence and dynamics of low energy resonances. Applying this to graphene we investigated the very strong THz light mater interaction which dominates over scattering. Useful for studying coupled excitations in multiferroics and monitoring chemical reactions. Also, THz-pump, SHG-probe spectoscopy: an ultrafast, surface sensitive probe of atomic-scale symmetry changes and nonlinear phonon dymanics. We are using this in Bi 2 Se 3 to investigate the nonlinear surface phonon dynamics. This is potentially very useful for studying catalysis.

36 MATERIALS SCIENCE↗

Ultrafast optical pump-probe spectroscopy is used to reveal the coexistence of coupled antiferromagnetic (AFM)/ferroelectric (FE) and ferromagnetic (FM) orders in multiferroic TbMnO3 films, which can guide researchers in creating new kinds of multiferroic materials.

Multiferroic materials have attracted much interest in the past decade, due not only to their novel device applications, but also their manifestations of coupling and interactions between different order parameters (particularly electric polarization and magnetic order). Recently, much attention has been focused on perovskite manganites, RMnO{sub 3} (R = rare earth ions), due to the discovery of a large magnetoelectric effect in these materials. The first member of this family to be discovered was TbMnO{sub 3} (TMO), which is now well established as a typical magnetoelectric multiferroic. Extensive experimental and theoretical studies have already been done on single crystal TMO (SC-TMO). In brief, SC-TMO, with a distorted orthorhombic perovskite structure, has an antiferromagnetic (AFM) phase transition at T{sub N} {approx}40 K with sinusoidally ordered Mn moments. Below T{sub FE} {approx} 28 K, ferroelectric (FE) order develops owing to the appearance of cycloidal spiral spin structure. In contrast, there are relatively few reports describing the properties of TMO thin films (typically grown on SrTiO{sub 3} (STO) substrates). In general, thin films can enable new functionality in materials, as their physical parameters can be changed by modifying their structure via strain imposed by the substrate. Strain in particular has the potential to directly couple FE and FM orders, which is very rare. This could benefit electronic device applications by providing low power consumption, high speed operation, and greater electric/magnetic field controllability. Previous investigations of magnetic properties in TMO films revealed an unexpected ferromagnetic (FM) order, in contrast to SC-TMO. However, several important questions regarding these films are still unanswered for instance: (1) What mechanism induces FM order? (2) Can FM, sinusoidal AFM and spiral AFM (or FE) orders coexist? (3) Can FM order be coupled to FE order? To fully understand these unique materials, experimental techniques capable of dynamically unraveling the interplay between these degrees of freedom on an ultrafast timescale are needed. Here, we use ultrafast optical pump-probe spectroscopy to reveal coexisting coupled magnetic orders in epitaxial TMO thin films grown on (001)-STO, which were not observed in previous work. Our temperature (T)-dependent transient differential reflectivity ({Delta}R/R) measurements show clear signatures of sinusoidal AFM, spiral AFM (FE) and FM phases developing as the film thickness changes. We carry out first-principle density functional theory (DFT) calculations to explain the coupling between AFM/FE and FM orders. These results reveal that the coupling between different magnetic orders observed in our multiferroic TMO thin films may offer greater control of functionality as compared to bulk single crystal multiferroics.

36 MATERIALS SCIENCE↗

A strong ferroelectric ferromagnet created by means of spin-lattice coupling.

Ferroelectric ferromagnets are exceedingly rare, fundamentally interesting multiferroic materials that could give rise to new technologies in which the low power and high speed of field-effect electronics are combined with the permanence and routability of voltage-controlled ferromagnetism. Furthermore, the properties of the few compounds that simultaneously exhibit these phenomena are insignificant in comparison with those of useful ferroelectrics or ferromagnets: their spontaneous polarizations or magnetizations are smaller by a factor of 1,000 or more. The same holds for magnetic- or electric-field-induced multiferroics. Owing to the weak properties of single-phase multiferroics, composite and multilayer approaches involving strain-coupled piezoelectric and magnetostrictive components are the closest to application today. Recently, however, a new route to ferroelectric ferromagnets was proposed by which magnetically ordered insulators that are neither ferroelectric nor ferromagnetic are transformed into ferroelectric ferromagnets using a single control parameter, strain. The system targeted, EuTiO{sub 3}, was predicted to exhibit strong ferromagnetism (spontaneous magnetization, {approx}7 Bohr magnetons per Eu) and strong ferroelectricity (spontaneous polarization, {approx}10 {micro}C cm{sup -2}) simultaneously under large biaxial compressive strain. These values are orders of magnitude higher than those of any known ferroelectric ferromagnet and rival the best materials that are solely ferroelectric or ferromagnetic. Hindered by the absence of an appropriate substrate to provide the desired compression we turned to tensile strain. Here we show both experimentally and theoretically the emergence of a multiferroic state under biaxial tension with the unexpected benefit that even lower strains are required, thereby allowing thicker high-quality crystalline films. This realization of a strong ferromagnetic ferroelectric points the way to high-temperature manifestations of this spin-lattice coupling mechanism. Our work demonstrates that a single experimental parameter, strain, simultaneously controls multiple order parameters and is a viable alternative tuning parameter to composition for creating multiferroics.

36 MATERIALS SCIENCE↗