Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiobjective optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

83 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Bayesian optimization of dynamic Ce( III ) electrooxidation

Abstract Cerium(III/IV) is a redox couple with promising applications in redox flow batteries and redox‐mediated water electrolyzers, but due to its high oxidation potential, parasitic oxygen evolution can occur and decrease the Faradaic efficiency (FE) of the oxidation reaction. Dynamic potential dosing can help balance the transport limitations and the electrooxidation rates, allowing for control over the cerium(III) concentration near the electrode, enhancing FE. Due to the large number of possible pulsing operating conditions, Bayesian optimization (BO) was used to rapidly identify the optimal potential pulses. With an active pulse voltage of 2.5 V vs. Ag/AgCl, the maximum FE achieved was 0.91 (active pulse time = 5 ms, resting pulse time = 136 ms), underscoring the need for long inactive times for cerium(III) diffusion to the electrode. Furthermore, a multiobjective BO was performed to identify optimal trade‐offs between FE and the partial current density to achieve improvements over constant current operation.

Engineering↗
DOE OSTI2023

Evolutionary Architecture Search for Generative Adversarial Networks Based on Weight Sharing

Generative adversarial networks (GANs) are a powerful generative technique but frequently face challenges with training stability. Network architecture plays a significant role in determining the final output of GANs, but designing a fine architecture demands extensive domain expertise. This article aims to address this issue by searching for high-performance generator’s architectures through neural architecture search (NAS). The proposed approach, called evolutionary weight sharing GANs (EWSGAN), is based on weight sharing and comprises two steps. First, a supernet of the generator is trained using weight sharing. Second, a multiobjective evolutionary algorithm (MOEA) is employed to identify optimal subnets from the supernet. These subnets inherit weights directly from the supernet for fitness assessment. Two strategies are used to stabilize the training of the generator supernet: 1) a fair single-path sampling strategy and 2) a discarding strategy. Experimental results indicate that the architecture searched by our method achieved a new state-of-the-art among NAS–GAN methods with a Fréchet inception distance (FID) of 9.09 and an inception score (IS) of 8.99 on the CIFAR-10 dataset. Finally, it also demonstrates competitive performance on the STL-10 dataset, achieving FID of 21.89 and IS of 10.51.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Microgrid Assisted Design for Remote Areas

In this work, we present a three-stage multiobjective mixed-integer linear programming (MILP) for the optimal expansion planning and operation of isolated multienergy microgrids in remote areas. By selecting the optimal distributed generators (DGs) and energy storage systems (ESSs) mix selection, siting, sizing, and scheduling in the remote microgrid, the proposed model is targeted to minimize the annualized total cost of microgrids while enhancing the performance of the system, i.e., minimizing the voltage deviations and line power loss. To represent the electricity and heat flow between generation resources and various electrical, heating, and cooling loads in the isolated microgrid, linearized power flow, and heat flow constraints are employed in the proposed optimization model. The available capacity of DGs and ESSs are modeled as discrete constants instead of continuous variables for practical purpose. Numerical simulation results on a remote microgrid consisting of DGs, ESSs, and various loads validate the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Data-driven analysis to understand GPU hardware resource usage of optimizations

With heterogeneous systems, the number of GPUs per chip increases to provide computational capabilities for solving science at a nanoscopic scale. However, low utilization for single GPUs defies the need to invest more money in expensive accelerators. Although related work develops optimizations to improve application performance, none studies how these optimizations impact hardware resource usage or average GPU utilization. Here, this paper takes a data-driven analysis approach in addressing this gap by (1) characterizing how hardware resource usage affects device utilization, execution time, or both, (2) presenting a multiobjective metric to identify important application-device interactions that can be optimized to improve device utilization and application performance jointly, (3) studying hardware resource usage behaviors of several optimizations for a benchmark application, and finally (4) identifying optimization opportunities for several scientific proxy applications based on their hardware resource usage behaviors. Furthermore, we demonstrate the applicability of our methodology by applying the identified optimizations to a proxy application, which improves the execution time, device utilization, and power consumption by up to 29.6%, 5.3% and 26.5% respectively.

Computer science↗
DOE OSTI2024

User-Centric Communication With Aerial Network for 6G: A Reinforcement Learning Approach

Meeting the diverse needs of user verticals requires innovative cellular architectures that can offer additional degrees of freedom to provide on-demand services. The terrestrial user-centric radio access network (UC-RAN) stands out as an excellent choice for this purpose. However, a drawback of UC-RAN is its tendency to prioritize high-priority verticals, often resulting in a subpar quality of experience for low-priority verticals. This issue is particularly exacerbated in hotspot areas. Here, to address this problem, we introduce an aerial network integrated with terrestrial UC-RAN to provide coverage to users which are not served by the terrestrial network. Furthermore, we analyze the impact of key configuration and optimization parameters (COPs), such as location, transmit power, altitude, and beamwidth of aerial base stations (ABSs) on system key performance indicators (KPIs), such as coverage, latency satisfaction, average spectral efficiency, and energy efficiency. We formulate a robust multiobjective function to maximize these KPIs without biasing toward any specific KPI(s). Finally, we propose a deep reinforcement learning optimization framework based on the state-of-the-art soft actor-critic algorithm to control ABS COPs and optimize system KPIs. Experimental evaluations demonstrate that the proposed optimization framework can converge to near-optimal solutions derived from the pseudo brute force in a few thousand epochs.

6G↗
DOE OSTI2023

Joint Optimization for Transport and Bucket Loading Phases of Automated Wheel Loaders

This article investigates optimization of fuel-efficiency and productivity for automated wheel loaders. A control-oriented model for both the transport phase and bucket loading phase is proposed. Here, the vehicle model includes an automatic gear shift schedule that can be incorporated into the optimization problem. Based on the model, the multistage optimization problem is formulated to simultaneously consider all phases of a short cycle with physical constraints. Cycle time and fuel efficiency are used as the weighted performance indexes in a multiobjective cost function. Bucket fill factor is included as a constraint during the bucket loading phase. A nonlinear programming problem is created with collocation using MATLAB and CasADi. The optimization solver IPOPT solves the problem to obtain the optimal state and control trajectories, which can be used as a reference for automated wheel loaders or even as a driver advisory for human-driven wheel loaders.

42 ENGINEERING↗
DOE OSTI2021

Bias free multiobjective active learning for materials design and discovery

The design rules for materials are clear for applications with a single objective. For most applications, however, there are often multiple, sometimes competing objectives where there is no single best material and the design rules change to finding the set of Pareto optimal materials. In this work, we leverage an active learning algorithm that directly uses the Pareto dominance relation to compute the set of Pareto optimal materials with desirable accuracy. We apply our algorithm to de novo polymer design with a prohibitively large search space. Using molecular simulations, we compute key descriptors for dispersant applications and drastically reduce the number of materials that need to be evaluated to reconstruct the Pareto front with a desired confidence. This work showcases how simulation and machine learning techniques can be coupled to discover materials within a design space that would be intractable using conventional screening approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Comparison of CCM- and CRM-Based Boost Parallel Active Power Decoupler for PV Microinverter

Single-phase inverter or rectifier systems often make use of an active power decoupler (APD) to balance the mismatch between constant dc power and fluctuating ac power. This article deals with the comparison of continuous conduction mode (CCM) and critical conduction mode (CRM) operation-based design of a parallel boost-type APD for photovoltaic microinverter applications. From a design perspective, multiobjective analysis of efficiency, volume, and cost is explored within a decision space including planar inductors, gallium nitride based devices, film capacitors, switching frequency, and modulation (CCM vs. CRM). The theoretical study analyzes all possible design configurations within CCM and CRM and identifies Pareto-optimal designs, from which the selected CRM design can achieve reduced system volume and lower cost with the use of smaller inductor core, while operating with similar California Energy Commission efficiency drop as the selected CCM design. From a control perspective, a pulsewidth modulation based control strategy is proposed to implement closed-loop CRM modulation that does not rely on zero-crossing detection. Furthermore, closed-loop systems are designed for the optimal CCM and CRM realizations, and the final system characteristics are compared. Experimental results, obtained using two separate 40-V, 400-W hardware prototypes for CCM and CRM, are presented to verify the analyses.

42 ENGINEERING↗
DOE OSTI2019

Models and methods for assessing the value of HVDC adn MVDC technologies in modern power grids (Annual Report, Executive Summary)

Evolution of today’s predominantly alternating current (ac) transmission grid in to mixed ac transmission – high-voltage direct current (HVdc) systems is expected with the decreasing costs of and advancements in power electronics technologies. The recent technological advancements include the development of more efficient and compact voltage source converters (VSCs) that can provide fast response. Because of their controllability and fast response, HVdc systems provide the ability to enhance reliability of the ac transmission grid through frequency support, voltage control, and congestion relief. The HVdc systems can also provide other ancillary services to enhance the economics and reliability of the ac transmission grids, and to optimize their performance. The tools, models, and methods developed to evaluate their benefits will be key enablers to understanding the value proposition introduced by the fast-acting HVdc systems. The main motivation of this work was to develop models and methods to explore and quantify the technical and economic benefits of HVdc systems and fast response VSC technologies in the future grid of United States. The models and methods explore the benefits of HVdc systems through provision of controlled active/reactive power and fast response. The fast response can provide much-needed multiobjective services to the grid (e.g., frequency response, voltage control) while moving blocks of energy. The models and methods can be applied to study other power electronics technologies and scenarios such as those undertaken in ongoing studies led by the North American Electric Reliability Corporation (NERC) Inverter-based Resource Performance Task Force (IRPTF). The IRPTF studies identify the problems associated with power electronics-based technologies as they are integrated in to the bulk power system (or the ac transmission system).

24 POWER TRANSMISSION AND DISTRIBUTION↗