Search NASA⌕ Search

SEARCH · Search NASA

Results for “multispectral”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

High resolution multispectral camera system for ERTS A & B

A very high resolution multispectral television camera system has been developed for NASA for use on the Earth Resources Technology Satellite (ERTS) program. There are three cameras in the system, each viewing the same area but operating in the blue-green, red, and near-infrared spectral bands. In the laboratory the cameras' limiting resolution is 4500 TV lines over the 25 x 25-mm image format of the Return Beam Vidicon (RBV). Analysis of typical ERTS scenes shows that actual contrast ratios will be much lower than those of laboratory test targets. A model was developed to predict the resolving power performance of the RBV camera under realistic conditions. To verify the model, tests were conducted using the RBV camera, a laser-beam image reproducer and a series of AF tribar test patterns of known values of contrast. As a more graphic demonstration, simulated multispectral images were generated using color-IR photographs from Apollo 9. The measured signal-to-noise, resolution, and spectral characteristics of the ERTS Flight A and Flight B three-camera systems are presented in conclusion.

Miller, B. P.↗
NASA NTRS1973

Transmissometry and suspended matter in lower Chesapeake Bay - Correlation with ERTS multispectral imagery

The use of multispectral imagery from the Earth Resources Technology Satellite to quantitatively monitor turbidity and suspended matter of estuarine waters is being evaluated in this study. Synoptic measurements of surface-water characteristics are being made on three baselines in lower Chesapeake Bay in synchrony with satellite overpasses. Turbidity is measured as transmittance by a continuously recording transmissometer, and suspended matter is collected by filtration. Preliminary correlations to ERTS multispectral imagery have been made by microdensitometry. Final correlations will be made from the bulk tape format.

Bowker, D. E.↗
NASA NTRS1974

Usefulness of Skylab color photography and ERTS-1 multispectral imagery for mapping range vegetation types in southwestern Wyoming

The author has identified the following significant results. Aerial photography at scales of 1:43,400 and 1:104,500 was used to evaluate the usefulness of Skylab color photography (scales of 1:477,979 and 1:712,917) and ERTS-1 multispectral imagery (scale 1:1,000,000) for mapping range vegetation types. The project was successful in producing a range vegetation map of the 68,000 acres of salt desert shrub type in southwestern Wyoming. Techniques for estimation of above-ground green biomass have not yet been confirmed due to the mechanical failure of the photometer used in obtaining relative reflectance measurement. However, graphs of log transmittance versus above-ground green biomass indicate that production estimates may be made for some vegetation types from ERTS imagery. Other vegetation types not suitable for direct ERTS estimation of green biomass may possibly be related to those vegetation types whose production has been estimated from the multispectral imagery.

Gordon, R. C.↗
NASA NTRS1975

A procedure for automated land use mapping using remotely sensed multispectral scanner data

A system of processing remotely sensed multispectral scanner data by computer programs to produce color-coded land use maps for large areas is described. The procedure is explained, the software and the hardware are described, and an analogous example of the procedure is presented. Detailed descriptions of the multispectral scanners currently in use are provided together with a summary of the background of current land use mapping techniques. The data analysis system used in the procedure and the pattern recognition software used are functionally described. Current efforts by the NASA Earth Resources Laboratory to evaluate operationally a less complex and less costly system are discussed in a separate section.

Whitley, S. L.↗
NASA NTRS1974

Investigation related to multispectral imaging systems

A summary of technical progress made during a five year research program directed toward the development of operational information systems based on multispectral sensing and the use of these systems in earth-resource survey applications is presented. Efforts were undertaken during this program to: (1) improve the basic understanding of the many facets of multispectral remote sensing, (2) develop methods for improving the accuracy of information generated by remote sensing systems, (3) improve the efficiency of data processing and information extraction techniques to enhance the cost-effectiveness of remote sensing systems, (4) investigate additional problems having potential remote sensing solutions, and (5) apply the existing and developing technology for specific users and document and transfer that technology to the remote sensing community.

Nalepka, R. F.↗
NASA NTRS1975

Atmospheric effects in multispectral remote sensor data

The problem of radiometric variations in multispectral remote sensing data which occur as a result of a change in geometric and environmental factors is studied. The case of spatially varying atmospheres is considered and the effect of atmospheric scattering is analyzed for realistic conditions. Emphasis is placed upon a simulation of LANDSAT spectral data for agricultural investigations over the United States. The effect of the target-background interaction is thoroughly analyzed in terms of various atmospheric states, geometric parameters, and target-background materials. Results clearly demonstrate that variable atmospheres can alter the classification accuracy and that the presence of various backgrounds can change the effective target radiance by a significant amount. A failure to include these effects in multispectral data analysis will result in a decrease in the classification accuracy.

Turner, R. E.↗
NASA NTRS1975

A technique for constructing spectral reflectance curves from Viking lander camera multispectral data

A technique for evaluating the construction of spectral reflectance curves from multispectral data obtained with the Viking lander cameras is presented. The multispectral data is limited to 6 channels in the wave-length range 0.4 to 1.1 microns, and several of the channels suffer from appreciable out-of-band response. The technique represents the estimated reflectance curves as a linear combination of known basic functions with coefficients determined to minimize the error in the representation, and it permits all channels, with and without out-of-band response, to contribute equally valid information. The technique is evaluated for known spectral reflectance curves of 8 materials felt likely to be present on the Martian surface. The technique provides an essentially exact fit if the the reflectance curve has no pronounced maxima and minima. Even if the curve has pronounced maxima and minima, the fit is good and reveals the most dominant features. Since only 6 samples are available some short period features are lost. This loss is almost certainly due to undersampling rather than out-of-band channel response.

Park, S. K.↗
NASA NTRS1974

Sensor performance evaluation of the Skylab multispectral photographic facility

Results of resolution tests for multispectral imagery from Skylabs 2, 3, and 4 are presented. Methods employed were visual edge matching and edge slope analysis, and resolution was evaluated as a function of spectral band, EREP pass, target orientation, field of view, exposure, and contrast. Preflight and postflight image quality data were compared. The multispectral image quality has equaled or slightly exceeded design predictions.

Corbett, F. J.↗
NASA NTRS1974

The use of multispectral difference data for urban change detection

The current work describes an experiment in which ERTS-1 digital multispectral scanner data from two times was used to detect change in an urban scene. The computer analysis implementation approach explored here was to register image data from the two times and to subtract the data to form multispectral difference images. The difference imagery was then analyzed using statistical pattern recognition to separate and classify different types of change. Construction was successfully detected.

Anuta, P. E.↗
NASA NTRS1975

The use of ERTS-1 multispectral imagery for crop identification in a semi-arid climate

Crop identification using multispectral satellite imagery and multivariate pattern recognition was used to identify wheat accurately in Greeley County, Kansas. A classification accuracy of 97 percent was found for wheat and the wheat estimate in hectares was within 5 percent of the USDA's Statistical Reporting Service estimate for 1973. The multispectral response of cotton and sorghum in Texas was not unique enough to distinguish between them nor to separate them from other cultivated crops.

Stockton, J. G.↗
NASA NTRS1975

IMAGE 100: The interactive multispectral image processing system

The need for rapid, cost-effective extraction of useful information from vast quantities of multispectral imagery available from aircraft or spacecraft has resulted in the design, implementation and application of a state-of-the-art processing system known as IMAGE 100. Operating on the general principle that all objects or materials possess unique spectral characteristics or signatures, the system uses this signature uniqueness to identify similar features in an image by simultaneously analyzing signatures in multiple frequency bands. Pseudo-colors, or themes, are assigned to features having identical spectral characteristics. These themes are displayed on a color CRT, and may be recorded on tape, film, or other media. The system was designed to incorporate key features such as interactive operation, user-oriented displays and controls, and rapid-response machine processing. Owing to these features, the user can readily control and/or modify the analysis process based on his knowledge of the input imagery. Effective use can be made of conventional photographic interpretation skills and state-of-the-art machine analysis techniques in the extraction of useful information from multispectral imagery. This approach results in highly accurate multitheme classification of imagery in seconds or minutes rather than the hours often involved in processing using other means.

Schaller, E. S.↗
NASA NTRS1975

M-DAS: System for multispectral data analysis

M-DAS is a ground data processing system designed for analysis of multispectral data. M-DAS operates on multispectral data from LANDSAT, S-192, M2S and other sources in CCT form. Interactive training by operator-investigators using a variable cursor on a color display was used to derive optimum processing coefficients and data on cluster separability. An advanced multivariate normal-maximum likelihood processing algorithm was used to produce output in various formats: color-coded film images, geometrically corrected map overlays, moving displays of scene sections, coverage tabulations and categorized CCTs. The analysis procedure for M-DAS involves three phases: (1) screening and training, (2) analysis of training data to compute performance predictions and processing coefficients, and (3) processing of multichannel input data into categorized results. Typical M-DAS applications involve iteration between each of these phases. A series of photographs of the M-DAS display are used to illustrate M-DAS operation.

Johnson, R. H.↗
NASA NTRS1976

Urban land use monitoring from computer-implemented processing of airborne multispectral data

Machine processing techniques were applied to multispectral data obtained from airborne scanners at an elevation of 600 meters over central Indianapolis in August, 1972. Computer analysis of these spectral data indicate that roads (two types), roof tops (three types), dense grass (two types), sparse grass (two types), trees, bare soil, and water (two types) can be accurately identified. Using computers, it is possible to determine land uses from analysis of type, size, shape, and spatial associations of earth surface images identified from multispectral data. Land use data developed through machine processing techniques can be programmed to monitor land use changes, simulate land use conditions, and provide impact statistics that are required to analyze stresses placed on spatial systems.

Todd, W. J.↗
NASA NTRS1976

Digital computer processing of peach orchard multispectral aerial photography

Several methods of analysis using digital computers applicable to digitized multispectral aerial photography, are described, with particular application to peach orchard test sites. This effort was stimulated by the recent premature death of peach trees in the Southeastern United States. The techniques discussed are: (1) correction of intensity variations by digital filtering, (2) automatic detection and enumeration of trees in five size categories, (3) determination of unhealthy foliage by infrared reflectances, and (4) four band multispectral classification into healthy and declining categories.

Atkinson, R. J.↗
NASA NTRS1975

Cropland acreage estimates from temporal, multispectral ERTS-1 data

Temporal, multispectral Earth Resources Technology Satellite (ERTS-1) images as pertinent to cropland acreage estimates are illustrated and discussed. A cropland classifier is described that evaluates approximately registered, temporal, and multispectral digital ERTS-1 data acquired over a 14 section test site in central Iowa during 1973. Satellite-derived acreage estimates are compared with estimates derived from low-level images. Discrepancies between these estimates are discussed. Satellite coverage critically timed with a crop development calendar is noted to improve classifier effectiveness.

Carlson, R. E.↗
NASA NTRS1975

Advances in automatic extraction of information from multispectral scanner data

The state-of-the-art of automatic multispectral scanner data analysis and interpretation is reviewed. Sources of system variability which tend to obscure the spectral characteristics of the classes under consideration are discussed, and examples of the application of spatial and temporal discrimination bases are given. Automatic processing functions, techniques and methods, and equipment are described with particular attention to those that are applicable to large land surveys using satellite data. The development and characteristics of the Multivariate Interactive Digital Analysis System (MIDAS) for processing aircraft or satellite multispectral scanning data are discussed in detail. The MIDAS system combines the parallel digital implementation capabilities of a low-cost processor with a general purpose PDP-11/45 minicomputer to provide near-real-time data processing. The preprocessing functions are user-selectable. The input subsystem accepts data stored on high density digital tape, computer compatible tape, and analog tape.

Erickson, J. D.↗
NASA NTRS1977

Multispectral data analysis

LARSYS III.1 program is designed for remote-sensing research and application. Pattern recognition and interaction data handling techniques analyze remotely-sensed multispectral and multitemporal data. Primary inputs are multispectral data in image orientation.

Source record↗
NASA NTRS1977

Remote sensing operations (multispectral scanner and photographic) in the New York Bight, 22 September 1975

Ocean dumping of waste materials is a significant environmental concern in the New York Bight. One of these waste materials, sewage sludge, was monitored in an experiment conducted in the New York Bight on September 22, 1975. Remote sensing over controlled sewage sludge dumping included an 11-band multispectral scanner, fiver multispectral cameras and one mapping camera. Concurrent in situ water samples were taken and acoustical measurements were made of the sewage sludge plumes. Data were obtained for sewage sludge plumes resulting from line (moving barge) and spot (stationary barge) dumps. Multiple aircraft overpasses were made to evaluate temporal effects on the plume signature.

Johnson, R. W.↗