Results for “nrho” — Page 5

NASA NTRSDate not supplied

Investigating Solar Radiation Pressure Modeling for Operations in Near Rectilinear Halo Orbit

NASA’s Gateway program will build a crew-tended station in an Earth-Moon Near Rectilinear Halo Orbit (NRHO). Deep space operations differ considerably from Low Earth Orbit (LEO) operations in the environmental modeling, orbit geometry, and propagation timespans in operations. The cislunar environment, as opposed to the LEO environment, lacks atmospheric drag and is simultaneously affected by the gravity of both the Earth and the Moon, and solar radiation pressure (SRP) has a significant effect. This paper investigates the impacts of various SRP models on prediction accuracy, attitude control accuracy, orbit determination performance, and computational burden.

Guidance↗

NASA NTRSDate not supplied

Solar Absorptivity Degradation of Spacecraft Materials Due to UV and Charged Particles in the Gateway Environment

Gateway will be an outpost in cislunar space designed to survive a 15-year mission to support human Moon landings and future deep space exploration. The Gateway Passive Thermal Control System (PTCS) Group has identified charged particle and UV degradation of potential Gateway materials as a knowledge gap for the Near Rectilinear Halo Orbit (NRHO) and transit environment, especially the slow spiral transit planned for the first two modules. Solar absorptivity degradation is important to quantify because the end-of-life absorptivity impacts thermal performance of the system. To address this, ground testing has been completed at NASA Goddard Space Flight Center in which potential Gateway materials, including radiators, multi-layer insulation (MLI), and structural materials are subjected to the expected transit plus 15-year on-orbit charged particle fluence (9.86x1015 protons/cm2 at 2.5 keV and 3.1x1016 electrons/cm2 at 10 keV) and 5093 Equivalent Solar Hours (ESH). Reflectivity of a single sample of each material was measured in atmosphere and in vacuum inside the chamber after exposure to incremental levels of ESH and charged particle fluence. Increase in absorptivity of most samples were seen throughout the test including large differences in absorptivity of materials of the same category. Future planned testing will validate these results and include additional materials of interest.

Optical Property↗

NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being considered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗

NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being con- sidered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗

NASA NTRS2018

Disposal Trajectories from Near Rectilinear Halo Orbits

After completion of a resupply mission to NASA's proposed Lunar Orbital Platform - Gateway, safe disposal of the Logistics Module is required. One potential option is disposal to heliocentric space. This investigation includes an exploration of the trajectory escape dynamics from an Earth-Moon Near Rectilinear Halo Orbit (NRHO) and applies these insights to the design of a low-cost heliocentric Logistics Module disposal option. The effects of the solar gravitational perturbations are assessed in both the bicircular restricted 4-body problem and in an ephemeris force model.

Boudad, Kenza K.↗

NASA NTRS2019

Attitude Control and Orbit Determination of a Crewed Spacecraft with Lunar Lander in near Rectilinear Halo Orbit

NASA's Gateway program plans to place a crew-tended spacecraft in cislunar Near Rectilinear Halo Orbit (NRHO). The craft will support arrivals of crews in Orion and the undocking and return of a crewed lunar lander. The impact to at-titude control of a Gateway with the addition of a lunar lander is investigated. Perturbations from Orion and a lander's docking and undocking from the Gate-way are considered. Deep Space Network (DSN) tracking is supplemented with optical measurements to lunar north pole craters to analyze the possible benefit in solution accuracy and/or DSN scheduling relief.

Newman, Clark P.↗

NASA NTRS2019

GPS Based Autonomous Navigation Study for the Lunar Gateway

This paper describes and predicts the performance of a conceptual autonomous GPS-based navigation system for NASA's planned lunar Gateway. This system is based on the flight-proven Magnetospheric Multiscale (MMS) GPS navigation system, augmented with an earth-pointed high-gain antenna and with an option for an atomic clock. High-fidelity simulations, calibrated against MMS flight data and making use of GPS transmitter patterns from the GPS Antenna Characterization Experiment (ACE) project are developed for operation of the system in the Gateway Near-Rectilinear Halo Orbit (NRHO). The results indicate that GPS can provide an autonomous, realtime navigation capability with comparable, or superior, performance to traditional Deep Space Network approach with eight hours of tracking per day.

Winternitz, Luke B.↗

NASA NTRS2019

Heliocentric Escape and Lunar Impact from Near Rectilinear Halo Orbits

Spacecraft departing from the Gateway in a Near Rectilinear Halo Orbit (NRHO) experience gravitational forces from the Moon, the Earth, and the Sun, all of which can be simultaneously significant. These complex dynamics influence the post-separation risk of recontact with the Gateway and the eventual destinations of the departing spacecraft. The current investigation examines the flow of objects leaving NRHOs in the Bicircular Restricted Four-Body Problem, and results are applied to heliocentric escape and lunar impact trajectories in a higher-fidelity ephemeris model. Separation maneuver magnitude, direction, and location are correlated with risk of recontact with the Gateway and successful departure to various destinations.

Davis, Diane C.↗

NASA NTRS2020

Power and Propulsion Element (PPE) Spacecraft Reference Trajectory Document

This document captures example reference trajectories for the PPE including a reference delivery orbit and orbit maintenance, an example cislunar orbit transfer and end-of-mission (EOM) disposal trajectory. The flexibility of electric propulsion offers, by its low thrust nature, multiple different trajectory options to transfer from one orbit to another. The trajectories captured in this document are representative examples of a low thrust transfer from the NRHO and to multiple cislunar orbits. This document provides a consistent set of data from mission design to be used in the design of the vehicle capable of flying the trajectory described. The data in this document will be used to create conference papers. In order to do so, we are ending this document through for external release.

Melissa L Mcguire↗

NASA NTRSDate not supplied

Human Landing System Storable Propellant Architecture: Mission Design, Guidance, Navigation, and Control

In preparation of the NextSTEP-2 Appendix H awards, NASA’s Human Landing System (HLS) Program (HLSP) went through an abbreviated Design Analysis Cycle (DAC), or miniDAC, to characterize and quantify how a storable propellant design would affect and improve overall system performance of the Government reference design. As part of that miniDAC, HLSP ran multiple trade studies and assessments, including aspects of Mission Design, Flight Mechanics (FM), and Guidance, Navigation, and Control (GN\&C). The storable propellant designs were assessed through the baseline mission targeting the Near Rectilinear Halo Orbit (NRHO) and several alternate staging orbits. This paper focuses on the FM and GN\&C trades and assessments completed as part of the miniDAC as well as the GN\&C elements of the miniDAC Master Equipment List (MEL) developed for the storable propellant lander configurations.

A S Craig↗

NASA NTRSDate not supplied

The Behavior of High-Velocity Dust Generated by Lander Plumes in the Lunar Environment

Lunar lander plumes are known to accelerate fine dust to speeds exceeding 2 km/s, and the resultant ejecta may remain in lunar orbit for extended periods of time. Such ejecta could become hazardous to objects in lunar orbit as well as systems on the surface. In order to understand the impact on orbiting lunar infrastructure such as Gateway, as well as assets on the lunar surface, here we consider the dynamics of the resultant high-velocity plume ejecta. Initial conditions were set by the expected near-term lunar activity and the known cone of accelerated dust generated by previous lunar landings. The effects of regular 3-body gravitation, solar radiation pressure, and electric field are included in the model. It is found that although the majority of sub-μm dust is carried away by solar wind and electric fields, about ~10% of the dust between 1.7 km/s and 2.3 km/s reimpacts the surface, much of it near the landing site. The hazard posed by that debris is a function of lander mass and distance from the landing site. The Gateway, when orbiting in the nominal NRHO at the time of a landing, is not expected to be significantly affected by the dust. However, other spacecraft in less elliptic orbits may be at greater risk.

Ejecta↗

NASA NTRSDate not supplied

Human Landing System Storable Propellant Architecture: Mission Design, Guidance, Navigation, and Control

In preparation of the NextSTEP-2 Appendix H awards, NASA’s Human Landing System (HLS) Program (HLSP) went through an abbreviated Design Analysis Cycle (DAC), or miniDAC, to characterize and quantify how a storable propellant design would affect and improve overall system performance of the Government reference design. As part of that miniDAC, HLSP ran multiple trade studies and assessments, including aspects of Mission Design, Flight Mechanics (FM), and Guidance, Navigation, and Control (GN&C). The storable propellant designs were assessed through the baseline mission targeting the Near Rectilinear Halo Orbit (NRHO) and several alternate staging orbits. This paper focuses on the FM and GN&C trades and assessments completed as part of the miniDAC as well as the GN\&C elements of the miniDAC Master Equipment List (MEL) developed for the storable propellant lander configurations.

Landers↗

NASA NTRS2021

Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE)

NASA has partnered with Advanced Space to develop and build the Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE) mission which will serve as a pathfinder for Near Rectilinear Halo Orbit (NHRO) operations around the Moon. The NHRO, (Perilune = 3,200 km; Apolune = 70,000 km) will be the intended orbit for the NASA’s Artemis Gateway lunar orbital platform. The CAPSTONE mission will validate simulations and confirm operational planning for Gateway while also validating performance of navigation and station-keeping requirements for the Power and Propulsion Element. Thus, this mission will provide operational experience to NASA, commercial, and international missions for operations in a demanding orbital regime. The baseline for CAPSTONE is to fly a 12U cubesat developed, integrated, and tested by Tyvak Nanosatellite Systems carrying a payload communications system capable of cross-link ranging with the Lunar Reconnaissance Orbiter (LRO), a dedicated payload flight computer for software demonstration, and a camera. The launch, coordinated by NASA Launch Services Program, will be provided by a Rocket Lab launch vehicle utilizing their new Proton upper stage to deploy the CAPSTONE spacecraft into the lunar orbit. The CAPSTONE mission is targeting a launch no earlier than September 23, 2021. Upon launch, the spacecraft will traverse a highly efficient transfer taking approximately three months to enter a primary demonstration phase in an NRHO for six months followed by a twelve month technology enhancement operations phase. The CAPSTONE Project is lead by Advanced Space, LLC of Boulder Colorado. Spacecraft development and mission operations will be conducted by Tyvak Nanosatellite Systems of Irvine, California. Noted objectives for the CAPSTONE mission will be to demonstrate the accessibility of NHROs, validate key operational concepts in the NHRO environment, lay a foundation for commercial support of future lunar operations and accelerate the availability of peer-to-peer navigation capabilities provided by the Cislunar Autonomous Positioning System (CAPS). The CAPSTONE mission is funded through NASA's Small Spacecraft Technology Program (SSTP), which is one of several programs in NASA’s Space Technology Mission Directorate. SSTP is chartered to develop and demonstrate technologies to enhance and expand the capabilities of small spacecraft with a particular focus on enabling new mission architectures through the use of small spacecraft, expanding the reach of small spacecraft to new destinations, and augmenting future missions with supporting small spacecraft. The launch for the CAPSTONE Mission is provided by Human Exploration & Operations Missions Directorate Advanced Exploration Systems Division. Coordination and Acquisition of the Launch is managed by NASA’s Launch Services Program. The CAPSTONE Mission and project status will be presented.

CAPSTONE↗

NASA NTRS2021

Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE) Mission

NASA has partnered with Advanced Space to develop and build the Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment (CAPSTONE) mission which will serve as a pathfinder for Near Rectilinear Halo Orbit (NHRO) operations around the Moon. The NHRO, (Perilune = 3,200 km; Apolune = 70,000 km) will be the intended orbit for the NASA’s Artemis Gateway lunar orbital platform. The CAPSTONE mission will validate simulations and confirm operational planning for Gateway while also validating performance of navigation and station-keeping requirements for the Power and Propulsion Element. Thus, this mission will provide operational experience to NASA, commercial, and international missions for operations in a demanding orbital regime. The baseline for CAPSTONE is to fly a 12U cubesat developed, integrated, and tested by Tyvak Nanosatellite Systems carrying a payload communications system capable of cross-link ranging with the Lunar Reconnaissance Orbiter (LRO), a dedicated payload flight computer for software demonstration, and a camera. The launch, coordinated by NASA Launch Services Program, will be provided by a Rocket Lab launch vehicle utilizing their new Proton upper stage to deploy the CAPSTONE spacecraft into the lunar orbit. The CAPSTONE mission is targeting a launch no earlier than September 23, 2021. Upon launch, the spacecraft will traverse a highly efficient transfer taking approximately three months to enter a primary demonstration phase in an NRHO for six months followed by a twelve month technology enhancement operations phase. The CAPSTONE Project is lead by Advanced Space, LLC of Boulder Colorado. Spacecraft development and mission operations will be conducted by Tyvak Nanosatellite Systems of Irvine, California. Noted objectives for the CAPSTONE mission will be to demonstrate the accessibility of NHROs, validate key operational concepts in the NHRO environment, lay a foundation for commercial support of future lunar operations and accelerate the availability of peer-to-peer navigation capabilities provided by the Cislunar Autonomous Positioning System (CAPS). The CAPSTONE mission is funded through NASA's Small Spacecraft Technology Program (SSTP), which is one of several programs in NASA’s Space Technology Mission Directorate. SSTP is chartered to develop and demonstrate technologies to enhance and expand the capabilities of small spacecraft with a particular focus on enabling new mission architectures through the use of small spacecraft, expanding the reach of small spacecraft to new destinations, and augmenting future missions with supporting small spacecraft. The launch for the CAPSTONE Mission is provided by Human Exploration & Operations Missions Directorate Advanced Exploration Systems Division. Coordination and Acquisition of the Launch is managed by NASA’s Launch Services Program. The CAPSTONE Mission and project status will be presented.

CAPSTONE↗

NASA NTRSDate not supplied

Relative Navigation for Spacecraft in Nearly Rectilinear Halo Orbits

Lunar orbit missions are of great interest to the space exploration community. This paper is focused on the research, development, and feasibility of spacecraft docking within Nearly Rectilinear Halo Orbits (NRHO). In this work, a proximity estimation algorithm is developed using the Circular Restricted Three Body Problem (CR3BP) equations of motion, which can be used to estimate the proximity between a follower spacecraft and leader spacecraft while docking in NRHOs around the Moon. Promising initial simulation results are provided and discussed. This proximity estimation algorithm is shown to to provide useful tracking estimates which can be fed to the spacecraft control system and will help ensure mission success.

Luke J. Miller↗

NASA NTRSDate not supplied

Evaluating Lunar Descent and Landing Performance From a Near Rectilinear Halo Orbit Using Linear Covariance Resetting Techniques

Upcoming lunar programs are striving the achieve precision landing in a safe and robust manner. Various elements impact this mission objective ranging from on-orbit operations with ground station tracking to incorporating relative sensors with hazard detection and avoidance (HDA) to support the final approach and landing phase. Modeling the impacts of ground tracking, trajectory replanning, relative navigation sensors, and particularly a potential HDA system on the integrated closed-loop GN\&C system performance poses a unique challenge due to the complexity and interaction with multiple facets of the vehicle including the trajectory design, sensing hardware, navigation system, guidance and targeting, and the overall mission concept of operations. This paper outlines techniques to systematically analyze and compare the performance impacts of ground tracking and replanning and an HDA system where the onboard navigation errors are reset or uploaded from an external source and the vehicle's reference trajectory is regenerated requiring the system dispersions to also be reset to reflect this in-flight profile adjustment. To illustrate the application of these general techniques for analyzing the performance impacts due to incorporating these resetting events, they are demonstrated with a human lunar descent and landing scenario starting from a near rectilinear halo orbit (NRHO) until the vehicle precisely reaches its predetermined landing site on the lunar surface. Performance metrics such as inertial and relative navigation errors, trajectory dispersions, footprint dispersions, and propellant usage are provided.

GN&C↗

NASA NTRSDate not supplied

Attitude Profile Reference for the Earth Orbit Raising Phase of NASA Gateway’s Co-Manifested Vehicle

As part of NASAs lunar exploration Artemis program, the agency is designing a Gateway to orbit8near the moon and provide long term support of a sustained lunar presence at the moon’s south pole.9The first element launched for the Gateway is the Co-Manifested Vehicle (CMV), comprised of the10Power and Propulsion Element (PPE) and Habitation and Lunar Outpost (HALO). The PPE Mission11Design team of McGuire & et. al (2021) has developed a Design Reference Mission (DRM) trajectory12for CMV’s Earth Orbit Raising (EOR) mission phase, which provides the vehicle’s 3 degrees of freedom13(DoF) trajectory information during the approximately yearlong spiral out from low Earth orbit and14into the lunar near-rectilinear halo orbit (NRHO). In tandem, the PPE GN&C team is developing a15high-fidelity and fine temporal resolution 6DoF model of the CMV spacecrafts GN&C performance16for delivery to the Gateway team; this work acts to bridge the gap between Mission Designs 3DoF17reference and detailed GN&Cs attitude simulation.

Guidance Navigation and Control↗

NASA NTRS2020

Feasibility of “Weak GPS” Real-Time Positioning/Timing at Lunar Distance

There are multiple Global Navigation Satellite Systems (GNSS’s), comprising over 100 navigation satellites in the Earth’s medium and high orbits. Most of these satellites have antennas that point Nadir to earth, and transmit navigation signals so vehicles on Earth’s surface and in its vicinity can perform trilateration and estimate its 3-dimenional (3D) positioning. The sidelobes of these antennas can occasionally point to the Moon. It is postulated that a lunar vehicle carrying a large enough receiving antenna can occasionally detects and receives four or more sidelobes of these weak GNSS signals, thus enabling the vehicle to perform 3D positioning using an onboard GNSS receiver. We propagate the orbits of the GNSS satellites from United States’ Global Positioning Satellite (GPS) constellation, the Europe’s Galileo constellation, and the Russia’s GLONASS constellation, a total of 81 satellites. We simulate the visibility of these satellites by a lunar vehicle in a Near Rectilinear Halo Orbit (NRHO), based on the assumption that the lunar vehicle is “in-view” of a GNSS satellite as long as it falls within the 40- degree beam-width of the satellite. We also simulate the 3D positioning performance as a function of satellites’ ephemeris errors and pseudo-range errors. The preliminary results show that the lunar vehicle can “see” 5 – 13 satellites, and achieve a 3D positioning error (one-sigma) of 200 – 300 meters based on reasonable ephemeris and pseudo- range error assumptions. We also consider the case of using relative positioning to mitigate the GNSS satellites’ ephemeris biases. That is, by assuming a reference receiver with accurately known positioning that is close to the lunar vehicle, and computing the relative position of the lunar vehicle relative to the reference.

Cheung, Kar-Ming↗