Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear pairing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Cosmogenic records in Antarctic meteorites

Aliquot samples of 29 Antarctic L and H chondrites are analyzed for their nuclear track records and Mn-53 activities. The track density in the analyzed samples ranges from 10 to the 4th to approximately 6 x 10 to the 6th per sq cm. A significant finding is the observation of track-rich grains in a set of four L3 chondrites (ALHA 77215, 77216, 77217, and 77252), suspected of belonging to the same fall based on petrographic observations. An additional sample, ALHA 78105, an L6 chondrite, also has track-rich grains. Mn-53 activity is at near saturation level in approximately 65 percent of the analyzed samples, suggesting exposure ages of greater than 10 m.y. in these cases. Very few H chondrites from the 7-m.y. exposure age peak are apparently sampled among the ones investigated in this study. Approximately 6 percent and 4 percent, respectively, of the Antarctic H and L chondrites analyzed thus far for their cosmogenic records have precompaction irradiation features. A combined analysis of Mn-53 and nuclear track data makes it possible to confirm or rule out the proposed pairing of several sets of Antarctic meteorites and to estimate the preatmospheric sizes of some of these meteorites. The results suggest that most of the small Antarctic meteorites (less than 1 kg) have suffered high (greater than 95 percent) ablation mass-loss.

Goswami, J. N.↗
DOE OSTI2024

Measurement of the impact-parameter dependent azimuthal anisotropy in coherent $ρ$ 0 photoproduction in Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

This Letter presents the first measurement of the impact-parameter dependent angular anisotropy in the decay of coherently photoproduced $ρ$ 0 mesons. The $ρ$ 0 mesons are reconstructed through their decay into pion pairs. The measured anisotropy corresponds to the amplitude of the cos(2φ) modulation, where φ is the angle between the two vectors formed by the sum and the difference of the transverse momenta of the pions, respectively. The measurement was performed by the ALICE Collaboration at the LHC using data from ultraperipheral Pb–Pb collisions at a center-of-mass energy of $\sqrt{s_{NN}}$ = 5.02 TeV per nucleon pair. Different impact-parameter regions are selected by classifying the events in nuclear-breakup classes. The amplitude of the cos(2φ) modulation is found to increase by about one order of magnitude from large to small impact parameters. Theoretical calculations describe the measured cos(2φ) anisotropy and its impact-parameter dependence as the result of a quantum interference effect at the femtometer scale, arising from the ambiguity regarding which of the nuclei is the photon source in the interaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Athermal phonon collection efficiency in diamond crystals for low mass dark matter detection

Here, we explored the efficacy of lab-grown diamonds as potential target materials for the direct detection of sub-GeV dark matter (DM) using metallic magnetic calorimeters (MMCs). Diamond, with its excellent phononic properties and the low atomic mass of the constituent carbon, can play a crucial role in detecting low mass dark matter particles. The relatively long electron-hole pair lifetime inside the crystal may provide discrimination power between the DM-induced nuclear recoil events and the background-induced electron recoil events. Utilizing the fast response times of the MMCs and their unique geometric versatility, we deployed a novel methodology for quantifying phonon dynamics inside diamond crystals. We demonstrated that lab-grown diamond crystals fabricated via the chemical vapor deposition (CVD) technique can satisfy the stringent quality requirements for sub-GeV dark matter searches. The high-quality polycrystalline CVD diamond showed a superior athermal phonon collection efficiency compared to that of the reference sapphire crystal, and achieved energy resolution 62.7 eV at the 8.05 keV copper fluorescence line. With this energy resolution, we explored the low-energy range below 100 eV and confirmed the existence of so-called low-energy excess (LEE) reported by multiple cryogenic experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Chandra Discovery of a Candidate Hyperluminous X-Ray Source in MCG+11-11-032

We present a multiwavelength analysis of MCG+11-11-032, a nearby active galactic nucleus (AGN), with a unique classification as being both a binary and a dual AGN candidate. With new Chandra observations, we aim to resolve any dual AGN system via imaging data and search for signs of a binary AGN via analysis of the X-ray spectrum. Analyzing the Chandra spectrum, we find no evidence of the previously suggested double-peaked Fe Kα lines; the spectrum is instead best fit by an absorbed power law with a single Fe Kα line, as well as an additional line centered at ≈7.5 keV. The Chandra observation reveals faint, soft, and extended X-ray emission, possibly linked to low-level nuclear outflows. Further analysis shows evidence for a compact hard source—MCG+11-11-032 X2—located 3.″3 from the primary AGN. Modeling MCG+11-11-032 X2 as a compact source, we find that it is relatively luminous (L2–10 keV=1.5−0.5+0.9×1041erg s$^{−1}$), and the location is coincident with a compact and off-nuclear source resolved in Hubble Space Telescope infrared (F105W) and optical (F621M, F547M) bands. Pairing our X-ray results with a 144 MHz radio detection at the host galaxy location, we observe X-ray and radio properties similar to those of ESO 243-49 HLX-1, suggesting that MCG+11-11-032 X2 may be a hyperluminous X-ray source. This detection with Chandra highlights the importance of a high-resolution X-ray imager as well as how previous binary AGN candidates detected with large-aperture instruments can benefit from high-resolution follow-up. Future spatially resolved optical spectra, and deeper X-ray observations, can better constrain the origin of MCG+11-11-032 X2.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A Review of Advanced Characterization Methods and Techniques for Amorphous and Poorly Crystalline Materials Applicable to Cementitious Waste Forms

This review covers advanced characterization methods of cementitious materials. The particular focus is to understand cementitious compositions with amorphous content because conventional techniques such as X-ray diffraction are more applicable to materials with long range order. Also of interest is advanced characterization that provides deeper insights into properties such as porosity. There are five groups of characterization methods discussed in this review which are: electron beam/microscopy, X-ray, neutron diffraction and scattering, nuclear magnetic resonance, and optical techniques. The techniques can be further grouped by the categories of nanoscale structural understanding (transmission electron microscopy and pair distribution function), microscale structural understanding (focused ion beam and x-ray tomography), microscopic elemental distributions (energy dispersive spectroscopy and X-ray fluorescence), and chemical binding information (electron energy loss spectroscopy, x-ray absorption spectroscopy, nuclear magnetic resonance, Raman spectroscopy, and infrared spectroscopy), with advantages and disadvantages of each method discussed. The recommendation for further research is to begin with techniques that are easier to prepare samples for, measure, and analyze, such as the optical techniques of Raman and infrared spectroscopy. If more information is needed, pursue collaborations, other techniques, or proposals for beam time at the synchrotron sources.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1992

A new method for internal calibration of nuclear track detectors

A new technique is proposed for an internal calibration of a two-layer detector assembly. Spatially coincident pairs of conical tracks on one surface and overetched tracks on the adjacent surface are selected for measurement. Both the etch rate ratio and the particle range can be obtained from the minor and major diameters of the elliptical track and the radii of the circular tracks for two etching steps. This technique was applied to CR-39 detectors exposed to fast neutrons and those flown on a high altitude balloon in order to evaluate the proton response. An improvement by using multi-step etching was also carried out. It was found that not only a single set of the etch rate ratio and the range but also the response curve could be estimated in an extended region by analyzing combined growth curves.

NASA Discipline Radiation Health↗
NASA NTRS1993

Pairing statistics for infrared-luminous galaxies

A knowledge of the pairing fraction of IR-selected galaxies is important in understanding the role of interactions in star formation and nuclear activity. It is clear that interactions are extremely common among the most IR-luminous systems, but results have been inconsistent for less luminous systems; this may result from using peculiar morphology as an indicator of an interaction. Since features associated with milder interactions (e.g., tidal tails) tend to be faint, their detection necessarily depends on the depth of the survey used to identify interacting pairs. We present a sample of IR- and optically-selected galaxies for which we have computed pairing fractions using strictly geometrical, quantitative criteria. For the analysis we used a likelihood ratio technique developed by Keel and van Soest (1992). We find that the pairing fraction for IR-selected galaxies is roughly 30 percent, comparable to that found by Keel and van Soest for optically-selected starbursts. We also detect a strong correlation (r above 0.99) between the 60 micron luminosity of a galaxy sample and its pairing fraction. We conclude that although tidal interactions do not guarantee enhanced activity (AGN or starburst), they can amplify internal properties that would feed such activity.

Gallimore, J. F.↗
DOE OSTI2025

Across the Scales of the Nucleus: Understanding Short Range Correlations from Medium Modification to Probe Independence

The atomic nucleus presents an intricate system due to the non-linear forces described by Quantum Chromodynamics (QCD) that govern its structure. The range of scales involved is remarkable; the most massive nuclei weigh approximately five orders of magnitude more than the quarks that compose them. The nucleus can be analyzed at various levels, from quarks to hadrons to the nucleus as a whole. Short-Range Correlations (SRCs) within the nucleus play a significant role that spans these diverse scales. At the most fundamental level, SRCs influence the interaction between nucleons. The nucleon-nucleon (NN) interaction, arising from QCD, is crucial in determining nuclear properties. SRCs serve as valuable probes for measuring this NN interaction, as the nucleons within SRCs become effectively decoupled from the rest of the nucleus. Multiple experimental techniques, including electron scattering, have been employed to investigate the NN interaction through SRCs. However, our first project demonstrates that inclusive measurements alone are inadequate to constrain this interaction fully. Moving to the scale of the nucleus, SRCs contribute to the high-momentum tail of the nuclear spectral function. While the low-momentum region is characterized by nucleons exhibiting bulk properties, nucleons begin to pair into SRCs at higher momenta. Our research aims to bridge the understanding between the mean-field portion of the nucleus and its high-momentum SRC components. Additionally, SRCs affect the quark structure of protons, as evidenced by the EMC effect, which indicates that quarks behave differently when protons are embedded within a nucleus—an effect referred to as medium modification. This thesis explores the correlation between SRCs and medium modification across various experimental setups. Finally, we seek to establish an interpretation of the nuclear ground state. Accomplishing this requires demonstrating that our SRC observables are independent of the probe’s scale and scheme. The concluding project of this thesis illustrates how we utilize triple coincidence quasi-elastic scattering across a range of (Q2) values to develop a model-dependent framework for understanding SRC distributions within the nucleus’s ground-state wavefunction.

Denniston, A. W. Denniston [University of Tel Aviv↗
DOE OSTI2024

Exclusive J / ψ , ψ ( 2 s ) , and e + e - pair production in Au + Au ultraperipheral collisions at the BNL Relativistic Heavy Ion Collider

Measurements of exclusive J/ψ, ψ(2⁢s), and electron-positron (e + ⁢e - ) pair photoproduction in Au+Au ultraperipheral collisions are reported by the STAR experiment at $\sqrt{s_{NN}}$ = 200GeV. Here, we report several first measurements at the BNL Relativistic Heavy Ion Collider, which are (i) J/ψ photoproduction with large momentum transfer up to 2.2⁢(GeV/c) 2 , (ii) coherent J/ψ photoproduction associated with neutron emissions from nuclear breakup, (iii) the rapidity dependence of incoherent J/ψ photoproduction, (iv) the ψ⁡(2⁢s) photoproduction cross section at midrapidity, and (v) e + ⁢e - pair photoproduction up to high invariant mass of 6GeV/c 2 . For measurement (ii), the coherent J/ψ total cross section of γ + Au → J/ψ + Au as a function of the center-of-mass energy W γN has been obtained without photon energy ambiguities. The data are quantitatively compared with the Monte Carlo models STARlight, Sartre, BeAGLE, and theoretical calculations of gluon saturation with color glass condensate, nuclear shadowing with leading twist approximation, quantum electrodynamics, and the next-to-leading-order perturbative QCD. At the photon-nucleon center-of-mass energy of 25.0 GeV, the coherent and incoherent J/ψ cross sections of Au nuclei are found to be 71% ± 10% and 36% ± 7%, respectively, of that of free protons. These data provide an important experimental constraint for nuclear parton distribution functions and a unique opportunity to advance the understanding of the nuclear modification effect at the top RHIC energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Tetraquark Production by Intrinsic Charm

A number of new four-quark states containing from one to four c or ̅c quarks have been observed recently. Many of these new states have been discovered at the LHC. The production of these states via intrinsic charm in the proton is investigated. The tetraquark masses obtained in this approach, agree well with the measured masses. These calculations can provide some insight into the nature of the tetraquark candidates, whether as a bound meson pair or as a looser configuration of four individual partons which can influence their interactions in nuclear medium, such as in heavy-ion collisions. The kinematic distributions of these states as a function of y and pT are also studied. The possible cross sections for these states are also considered.

Vogt, Ramona [Lawrence Livermore National Laborato↗
DOE OSTI2025

Measurement of the branching ratio of 16 N , 15 C , 12 B , and 13 B isotopes through the nuclear muon capture reaction in the Super-Kamiokande detector

The Super-Kamiokande detector has measured solar neutrinos for more than 25 years. The sensitivity for solar neutrino measurement is limited by the uncertainties of energy scale and background modeling. Decays of unstable isotopes with relatively long half-lives through nuclear muon capture, such as 16 N, 15 C, 12 B, and 13 B, are detected as background events for solar neutrino observations. Here, in this study, we developed a method to form a pair of stopping muon and decay candidate events and evaluated the production rates of such unstable isotopes. We then measured their branching ratios considering both their production rates and the estimated number of nuclear muon capture processes as Br⁡( 16 N) = (9.0 ± 0.1)%, Br⁡( 15 C) = (0.6 ± 0.1)%, Br⁡( 12 B) = (0.98 ± 0.18)%, Br⁡( 13 B) = (0.14 ± 0.12)%, respectively. The result for 16 N has world-leading precision at present and the results for 15 C, 12 B, and 13 B are the first branching ratio measurements for those isotopes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRSDate not supplied

Evaluating the Performance of Hybrid Vehicles between LEO, Cislunar Space, and Mars

Nuclear power and electric propulsion technologies can enable a broad range of existing and future space mission concepts. This paper evaluates how these two technology classes, when combined into systems with various performance levels (and paired with a chemical propulsion system) affect vehicle sizing and mission feasibility for round-trip, opposition-class, crewed missions to Mars. The technology trade-space evaluated in this paper encompasses: various nuclear power system mass-efficiency levels (or power-specific mass), a range of output power levels available to the electric propulsion system, two electric propulsion thruster technologies (Hall and Magnetoplasmadynamic) at various characteristic specific impulse levels, and a range of propellant tank mass sizing coefficient. Each combination of the technologies is evaluated for the 2039 and the 2042 Mars mission opportunities for a range of imposed total mission duration constraints. The results show that synergies between technology performance levels exist and that increasing the performance of some parameters might have undesired consequences for the trajectory and vehicle. It was found that increasing the mass-efficiency of the nuclear power system is broadly beneficial, resulting in lower vehicle masses and enabling shorter mission durations. However, increasing the specific impulse of a thruster or increasing the available power level do not always yield a net benefit to the vehicle or mission; since increasing the specific impulse or power level (holding power system mass-efficiency constant) tends to decrease the vehicle thrust-to-mass ratio. Furthermore, the results show that mission feasibility is highly dependent on the mission duration; the required technology performance level to enable a mission is relaxed as the mission duration increases. Given the optimally sized vehicles resulting from the trade-space for a crewed mission to Mars, this paper also evaluates the impact of aggregating the Mars mission vehicle in Low-Earth Orbit and transferring it to the Mars mission departure node (using the on-board power and propulsion systems). The trade-space for this portion of the analysis includes the option of in-space vehicle refueling at the Mars mission departure node. The results show that on-orbit refueling can relax the required technology performance levels to achieve lower launch masses and orbit-raising durations at the cost of increased architecture complexity and risk.

Nuclear Electric Propulsion↗
NASA NTRSDate not supplied

Thermoradiative Conversion for Space Power Systems

The thermoradiative cell is a new method for converting heat energy to electrical power, first detailed by Strandberg in 2015. The cell is structurally similar to a photovoltaic cell, in that it is a p-n junction semiconductor device, but thermodynamically operates in the reverse direction, converting the thermal dark current into electrical power by utilizing the recombination radiation from thermally-generated electron hole pairs to radiate waste heat to space. This technology may have application for space missions in converting thermal energy produced by a radioisotope source or from a nuclear reactor into power. The power and efficiency can be calculated as a function of bandgap in the detailed-balance case (the Shockley-Queisser limit), in which all of the thermal emissivity of the cell is due to the recombination of thermally generated electron-hole pairs, and all other recombination losses are ignored. The current produced is directly proportional to the recombination radiation, and thus the more thermally generated pairs, the higher the current. The voltage is proportional to the external bias. These two constraints allow optimization of the optimum bias point for maximum power, and allow calculation of the efficiency at maximum power point. Unlike photovoltaic cells, the maximum power operating point is not the same as the maximum efficiency point, and higher efficiency can be achieved at a higher (negative) bias in the ideal case. Incorporating non-ideal losses, however, shifts the maximum efficiency point toward lower bias. Since a thermoradiative cell operates by radiating directly to space, the current produced by a themoradiative cells will increase with the Stefan-Boltzman radiative efficiency; roughly the fourth power of the temperature. Thus, in contrast to a photovoltaic converter, the power produced is highest at high operating temperatures. Likewise, in contrast to conventional thermal conversion, high radiator temperature increases, rather than decreases the efficiency. Thus, the thermoradiative conversion may fill a mission niche in which small radiator size is required. The basic operation will be summarized, applications to space power discussed, and the requirements for further research outlined.

Photovoltaic Cell↗
DOE OSTI2025

Observation of nuclear modification of energy-energy correlators inside jets in heavy ion collisions

Energy-energy correlators are constructed by averaging the number of charged particle pairs within jets, weighted by the product of their transverse momenta, as a function of the angular separation of the particles within a pair. They are sensitive to a multitude of perturbative and nonperturbative quantum chromodynamics phenomena in high-energy particle collisions. Using lead-lead data recorded with the CMS detector, energy-energy correlators inside high transverse momentum jets are measured in heavy ion collisions for the first time. The data are obtained at a nucleon-nucleon center-of-mass energy of 5.02 TeV and correspond to an integrated luminosity of 1.70 nb −1 . A similar analysis is done for proton-proton collisions at the same center-of-mass energy to establish a reference. The ratio of lead-lead to proton-proton energy-energy correlators reveals significant jet substructure modifications in the quark-gluon plasma. The results are compared to different models that incorporate either color coherence or medium response effects, where the two effects predict similar substructure modifications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1987

Induced star formation in interacting galaxies

Measurements of H alpha emission line fluxes and FIR fluxes in approx. 100 interacting spirals were used to investigate the effects of close tidal interactions on the disk and nuclear star formation rates in galaxies. Two samples of interacting spirals were studied, a complete sample of close pairs, and a set of strongly perturbed systems from the Arp atlas. Both the integrated H alpha luminosities and FIR luminosities are enhanced in the interacting galaxies, indicating that the encounters indeed trigger massive star formation in many cases. The response of individual galaxies is highly variable, however. A majority of the interacting spirals exhibit normal star formation rates, while a small fraction are undergoing bursts with luminosities which are rarely, if ever, observed in noninteracting systems. Virtually all of the latter are in the Arp sample, indicating that the Arp atlas is heavily biased to the most active star forming systems.

Kennicutt, R. C.↗
NASA NTRS1990

Neutral hydrogen in the starburst galaxy NGC3690/IC694

Researchers made observations of the neutral hydrogen (HI) emission structure surrounding the very deep absorption peak (observed earlier by Dickey (1986)) in the galaxy pair NGC3690/IC694. This galaxy pair is highly luminous in the far infrared, and known to exhibit extensive star formation as well as nuclear activity. Knowledge of the spatial distribution and velocity structure of the HI emission is of great importance to the understanding of the dynamics of the interaction and the resulting environmental effects on the galaxies.

Tolstoy, E.↗
DOE OSTI2025

Machine Learning Analysis of Temperature-Strain Relationships for Structural Health Monitoring of Pipes: Self-powered wireless sensor system for health monitoring of liquid-sodium cooled fast reactors

This report presents machine learning (ML) analysis of temperature-strain relationships for structural health monitoring of nuclear reactor stainless steel (SS) pipes with the strain gauge sensor directly printed on the pipe with a 3D conformal aerosol jet printer. We investigate correlations for two sensor pairs installed on the same SS304 pipe: commercial K-type thermocouple with a printed gold strain gauge (TC3-SG3), and commercial K-type thermocouple with commercial Kyowa strain gauge (TC0-SG0). The temperature ranges for the sensor pairs TC0-SG0 and TC3-SG3 are 20.00°C to 266.37°C and 39.95°C to 219.28°C respectively. ML algorithms in this study include Linear Regression (baseline method), Ridge Regression, Lasso Regression, and Gradient Boosting. Performance evaluation metrics include Root Mean Square Error (RMSE), Mean Square Error (MSE), Mean Absolute Error (MAE), R 2 Score, and Explained Variance. Using advanced feature engineering techniques, we extracted 27 temperature-based features and 30 strategic inclusion features. The best performance was obtained with the Gradient Boosting method, which achieves prediction accuracy of R 2 = 0.9999 and RMSE = 7.69 μStrain for TC0-SG0, and R 2 = 0.9998 and RMSE = 18.03 μStrain for TC3-SG3. While the temperature-strain correlations are weaker for the gauge directly printed on the pipe than for the commercial strain gauge, deployment-ready performance exceeding industry standards is achieved for both sensor pairs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗