SEARCH · Search NASA

Results for “number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Effects of initial conditions and transport on ram pressure, Mach number, and uniformity for plasma liner formation and implosion

Plasma jet driven magneto-inertial fusion involves the merging of high Mach number plasma jets in a spherically converging geometry to form an imploding plasma liner. A three-dimensional smooth particle hydrodynamic simulation tool was used to study the number of plasma jets, jet density, and implosion velocity on the effects of formation and subsequent implosion of a plasma liner. The effects of different transport physics are presented. Thermal radiation and two-temperature modeling were found to have the most significant impact on the ram pressure. Solid angle averaged ram pressure and Mach number degradation were of particular interest in this study. Higher jet numbers were found to result in higher peak ram pressure. A spherical harmonic analysis was conducted for each case, providing a quantitative measure of the non-uniformity of the liner during the implosion process and how non-uniformities are affected by the different parameters explored in this study.

Schillo, Kevin↗

DOE OSTI2021

Staged Z-pinch modeling of high and low atomic number liners compressing deuterium targets using parameters of the Z pulsed power facility

The staged Z-pinch is a potentially transformative magneto-inertial fusion energy concept where a high atomic number liner implodes on a deuterium or deuterium-tritium target using multi-MA pulsed current. Over the past several years, this concept was studied experimentally on 1 MA facilities with argon or krypton gas puffs compressing a magnetized deuterium target. Consistent thermonuclear neutron yield of 1010 per shot was measured with krypton liners. In this paper, we investigate the fusion performance of deuterium targets of varying density undergoing compression with low (beryllium) and high atomic number liners (silver, tantalum) using parameters of the Z pulsed power facility. Silver and tantalum liners create strong shocks that preheat the target plasma above 100 eV and pile up liner material at the liner-target interface. The increased mass density at the interface creates strong ram pressure just before the pinch stagnation time. The target plasma is heated to 2–4 keV, in contrast to the < 0.5 kV temperature calculated for the beryllium case. The high atomic number liners produce neutron yield orders of magnitude higher than the yield from the low atomic number liner.

Ruskov, E. (ORCID:0000000336724580)↗

DOE OSTI2021

A dimensionless number for high-throughput design of multi-principal element alloys in directed energy deposition

The present study demonstrates the development of a dimensionless number to predict the build height in the additive manufacturing technique of directed energy deposition (DED). The build height can also be used to estimate the dendrite arm spacing and, thus, the cooling rate in the fabrication of samples. A baseline sample, 316L stainless steel, was used to fit the build height to the dimensionless number. A range of process parameters, including laser power, laser feed rate, powder flow rate, layer thickness, and hatch spacing, were varied. Based upon dendrite arm spacing, the estimated cooling rate varied between 102 and 104 K/s. Using the fitted relationship for the stainless steel, high-throughput (HT) processing of multi-principal element alloys (MPEAs) was performed. For this study, HT is the ability to fabricate a batch of 25 bulk samples (∼1 cm3) with different compositions within a 5-h period with ±10 at. % accuracy. A range of compositions using in situ alloying of elemental powders in the Fe–Ni–Cr–Mo system were made. The MPEAs' build height followed the same relationship to the dimensionless number as the 316L alloy. The dimensionless number predicts both macro and meso-scale features in HT processing, thus offering a design tool for choosing process parameters in DED additive manufacturing. Also, the ability to control or increase cooling rates can enhance the ability to promote metastability as well as control meso-scale chemical distributions of alloy samples.

Islam, Zahabul (ORCID:0000000169613209)↗

DOE OSTI2024

Large eddy simulation of a supersonic lifted hydrogen flame: Impacts of Lewis, turbulent Schmidt and Prandtl numbers

Parametric large eddy simulations (LES) of a supersonic lifted hydrogen flame are reported. The emphases are on two aspects: impacts of (1) Lewis number (Lei of the ith species) and (2) turbulent Schmidt and Prandtl numbers (⁠Sc t and Pr t ⁠) on supersonic turbulent flame and flow structures. Five cases are considered: species-specific Le i , Sc t = Sr t = 1.0 (C 0 ); unity Le i , Sc t = Pr t = 1.0 (C 1 ); species-specific Sc t = 0.5, Pr t = 1.0 (C 2 ); species-specific Le i , Sc t = 1.0, Pr t = 0.5 (C 3 ); and species-specific Le i , Sc t = Pr t = 0.5 (C 4 ). Numerical results of instantaneous and/or time-averaged species mole fractions, mixture fraction, heat release rate, flame base location, and mixed modes of premixed and diffusion combustion are compared between cases C 0 and C 1 . Differences in auto-ignition locations and strengths and flame structures and stabilization specify the impacts of Lewis number. They are triggered by different predictions of species mass and thermal diffusions at fuel-coflow and/or coflow-ambient air mixing layers. These differences are rationalized by a scale analysis of mass/thermal diffusion and convection for case C 0 , which suggests the relatively low but non-negligible former against the latter. Cases C 0 and C 2 –C 4 barely see differences in terms of instantaneous and/or time-averaged temperature, velocity, and mixed combustion modes except for further downstream areas where combustion occurs. Both Sc t and Pr t impose less significant influences than Lewis number, as sub-grid scale mass/thermal diffusion is subordinate to its resolved counterpart according to their scale analysis for case C 4 .

42 ENGINEERING↗

DOE OSTI2024

Determination of the number of ψ(3686) events taken at BESIII*

Abstract The number ofψ(3686) events collected by the BESIII detector during the 2021 run period is determined to be (2259.3±11.1)×10 6 by counting inclusiveψ(3686) hadronic events. The uncertainty is systematic and the statistical uncertainty is negligible. Meanwhile, the numbers ofψ(3686) events collected during the 2009 and 2012 run periods are updated to be (107.7±0.6)×10 6 and (345.4±2.6)×10 6 , respectively. Both numbers are consistent with the previous measurements within one standard deviation. The total number ofψ(3686) events in the three data samples is (2712.4±14.3)×10 6 .

Physics↗

DOE OSTI2026

From Spin to Pseudospin Symmetry: The Origin of Magic Numbers in Nuclear Structure

Magic numbers lie at the heart of nuclear structure, reflecting enhanced stability in nuclei with closed shells. While the emergence of magic numbers beyond 20 is commonly attributed to strong spin-orbit coupling, the microscopic origin of the spin-orbit potential remains elusive, owing to its dependence on the resolution scale and renormalization scheme of nuclear forces. Here, we investigate the evolution of nuclear shell structure with varying momentum resolution in nuclear interactions derived from chiral effective field theory, using the similarity renormalization group to link different scales. We uncover a novel transition from spin symmetry to pseudospin symmetry as the resolution scale decreases, during which magic numbers emerge naturally. A similar pattern is found in calculations using relativistic one-boson-exchange potentials, underscoring the robustness of the phenomenon. This establishes a direct connection between realistic nuclear forces with a high resolution scale and effective nuclear forces at coarse-grained scales, offering a first-principles explanation for the origin of magic numbers and pseudospin symmetry in nuclear shell structure and new insights into the structure of exotic nuclei far from stability

Energy levels↗

DOE OSTI2022

Single-nucleon energies changing with nucleon number

The broad range of accumulated experimental data on the binding energies for single-particle states in nuclei is examined as a function of the constituent number of neutrons and protons and an unexpectedly simple pattern emerges. The dependence of the energies of neutron states on the number of constituent protons, or of proton states on the number of neutrons, are very similar to each other and the sign reflects the well-known strong attraction. For the same kind of nucleons changing as in the state – energies for neutron states with neutron number changing or proton states with protons – the dependence is at least a factor of four weaker in magnitude and slightly repulsive, except when the changing nucleons are only within the same orbit as the state. The systematics of the accumulated data are presented with a minimum of use made of model assumptions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Dark C P violation and gauged lepton or baryon number for electroweak baryogenesis

We explore the generation of the baryon asymmetry in an extension of the standard model where the lepton number is promoted to a U(1)ℓ gauge symmetry with an associated Z' gauge boson. This is based on a novel electroweak baryogenesis mechanism first proposed by us in Ref. Extra fermionic degrees of freedom, including a fermionic dark matter χ, are introduced in the dark sector for anomaly cancellation. The lepton number is spontaneously broken at high scale and the effective theory, containing the standard model, the Z', the fermionic dark matter, and an additional complex scalar field S, violates CP in the dark sector. The complex scalar field couples to the Higgs portal and is essential in enabling a strong first order phase transition. Dark CP violation is diffused in front of the bubble walls and creates a chiral asymmetry for χ, which in turn creates a chemical potential for the standard model leptons. Weak sphalerons are then in charge of transforming the net lepton charge asymmetry into net baryon number. We explore the model phenomenology related to the leptophilic Z', the dark matter candidate, the Higgs boson, and the additional scalar, as well as implications for electric dipole moments. We also discuss the case when baryon number U(1)B is promoted to a gauge symmetry, and discuss electroweak baryogenesis and its corresponding phenomenology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Lepton and baryon numbers as local gauge symmetries

A simple theory where the total lepton number is a local gauge symmetry is proposed. In this context, the gauge anomalies are canceled with the minimal number of extra fermionic fields and one predicts that the neutrinos are Majorana fermions. The properties of the neutrino sector are discussed, showing that this theory predicts a 3 + 2 light neutrino sector. We show that using the same fermionic fields one can gauge the baryon number and define a simple theory where the lepton and baryon numbers can be spontaneously broken at the low scale in agreement with experiments. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2025

Tidal Love numbers of analog black holes

Tidal Love numbers quantify the conservative static response of compact objects to external tidal fields, and are found to vanish exactly for asymptotically flat black holes in four-dimensional general relativity. Many aspects of the physics of black holes have an analog in the theory of supersonic acoustic flows, including the existence of an event horizon and associated phenomena, such as quasinormal modes and superradiance. In this paper, we investigate the tidal Love numbers of acoustic black holes in different number of dimensions. We find that they exhibit a number of similar properties as higher-dimensional general relativistic black holes, such as logarithmic running with radial distance, and vanishing tidal response for special multipole moments. As a result, we show that the latter is a consequence of ladder symmetries, analogous to those identified for black holes.

Classical black holes↗

DOE OSTI2022

Dimensionless parameters for cloudy Rayleigh-Bénard convection: Supersaturation, Damköhler, and Nusselt numbers

In steady-state Rayleigh-Bénard convection, heat is transported by turbulent thermal convection from the bottom, hot surface to the top, cold surface, leading to a height-independent sensible heat flux. When water vapor is present and cloud formation occurs, there is also an additional latent heat flux. Heat transport in cloudy Rayleigh-Bénard convection depends on turbulent flow as well as the microphysical state of the clouds: specifically, whether substantial supersaturations exist and whether cloud liquid water is removed through sedimentation/precipitation. In this article we bridge between the Rayleigh-Bénard convection literature and the atmospheric literature. We express the governing equations for cloudy convection in dimensionless form, thereby explicitly identifying the governing parameters relevant to the cloudy case, including Schmidt, Damköhler, supersaturation, and sedimentation numbers. We further connect to the atmospheric literature by obtaining a Nusselt number (dimensionless heat flux) for a cloud-convection system, directly from the conservation equations for temperature and water vapor. This flux has the same form as that identified by Zhang et al. [L. Zhang, K. L. Chong, and K.-Q. Xia, J. Fluid Mech. 874, 1041 (2019)] for convection with water vapor, but is extended to the cloudy case. For equal thermal and water vapor diffusivities, the flux corresponds to the widely used atmospheric quantities equivalent temperature and moist static energy. Using large eddy simulation (LES) of an idealized cloudy Rayleigh-Bénard convection system with fixed boundary conditions, we find that the equivalent heat flux (Nusselt number) is only weakly dependent on the microphysical details of the system, such as liquid water mixing ratio and cloud droplet number concentration. Finally, from the results, we show the vertical profiles of sensible and latent heat fluxes depend on the liquid water content, whereas the equivalent heat flux remains a constant throughout the height of the chamber.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Comparing Cetane Number Measurement Methods

Cetane number is one of the most important fuel performance metrics for mixing controlled compression-ignition “diesel” engines, quantifying a fuel’s propensity for autoignition when injected into end-of-compression-type temperature and pressure conditions. The historical default and referee method on a Cooperative Fuel Research (CFR) engine configured with indirect fuel injection and variable compression ratio is cetane number (CN) rating. A subject fuel is evaluated against primary reference fuel blends, with heptamethylnonane defining a low-reactivity endpoint of CN = 15 and hexadecane defining a high-reactivity endpoint of CN = 100. While the CN scale covers the range from zero (0) to 100, typical testing is in the range of 30 to 65 CN. Alternatively, several constant-volume combustion chamber (CVCC)-based cetane rating devices have been developed to rate fuels with an equivalent derived cetane number (DCN) or indicated cetane number (ICN). These devices measure ignition delay for fuel injected into a fixed volume of high-temperature and high-pressure air to simulate end-of-compression-type conditions. In this study, a range of novel fuel compounds are evaluated across three CVCC methods: the Ignition Quality Tester (IQT), Fuel Ignition Tester (FIT), and Advanced Fuel Ignition Delay Analyzer (AFIDA). Resulting DCNs and ICNs are compared for fuels within the normal diesel fuel range of reactivity, as well as very high (~100) and very low DCNs/ICNs (~5). Distinct differences between results from various devices are discussed. This is important to consider because some new, high-efficiency advanced compression-ignition (CI) engine combustion strategies operate with more kinetically controlled distributed combustion as opposed to mixing controlled diffusion flames. These advanced combustion strategies may benefit from new fuel chemistries, but current rating methods of CN, DCN, and ICN may not fully describe their performance. In addition, recent evidence suggests ignition delay in modern on-road diesel engines with high-pressure common rail fuel injection systems may no longer directly correlate to traditional CN fuel ratings. Simulated end-of-compression conditions are compared for CN, DCN, and ICN and discussed in the context of modern diesel engines to provide additional insight. Results highlight the potential need for revised and/or multiple fuel test conditions to measure fuel performance for advanced CI strategies.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

Probabilistic picture for particle number densities in stretched tips of the branching Brownian motion

Abstract In the framework of a stochastic picture for the one-dimensional branching Brownian motion, we compute the probability density of the number of particles near the rightmost one at a time T , that we take very large, when this extreme particle is conditioned to arrive at a predefined position x T chosen far ahead of its expected position m T . We recover the previously conjectured fact that the typical number density of particles at a distance Δ to the left of the lead particle, when both Δ and are large, is smaller than the mean number density by a factor proportional to , where ζ is a constant that was so far undetermined. Our picture leads to an expression for the probability density of the particle number, from which a value for ζ may be inferred.

Physics↗

DOE OSTI2022

Proposal for a quantum random number generator using coherent light and a non-classical observable

The prototype quantum random number (random bit) generator (QRNG) consists of one photon at a time falling on a 50:50 beam splitter followed by random detection in one or the other output beams due to the irreducible probabilistic nature of quantum mechanics. Due to the difficulties in producing single photons on demand, in practice, pulses of weak coherent (laser) light are used. In this paper, we take a different approach, one that uses moderate coherent light. It is shown that a QRNG can be implemented by performing photon-number parity measurements. For moderate coherent light, the probabilities of obtaining even or odd parity in photon counts are 0.5 each. Photon counting with single-photon resolution can be performed through use of a cascade of beam splitters and single-photon detectors, as was done recently in a photon-number parity-based interferometry experiment involving coherent light. We highlight the point that unlike most quantum-based random number generators, our proposal does not require the use of classical de-biasing algorithms or post-processing of the generated bit sequence.

Gerry, Christopher C.↗

DOE OSTI2023

Complexity-theoretic foundations of BosonSampling with a linear number of modes

BosonSampling is the leading candidate for demonstrating quantum computational advantage in photonic systems. While we have recently seen many impressive experimental demonstrations, there is still a formidable distance between the complexity-theoretic hardness arguments and current experiments. One of the largest gaps involves the ratio of {particles} to modes -- all current hardness evidence assumes a dilute regime in which the number of linear optical modes scales at least quadratically in the number of particles. By contrast, current experiments operate in a saturated regime with a linear number of modes. In this paper we bridge this gap, bringing the hardness evidence for experiments in the saturated regime to the same level as had been previously established for the dilute regime. This involves proving a new worst-to-average-case reduction for computing the Permanent which is robust to both large numbers of row repetitions and also to distributions over matrices with correlated entries. We also apply similar arguments to give evidence for hardness of Gaussian BosonSampling in the saturated regime.

Computational Complexity (cs.CC)↗

DOE OSTI2023

Method of coating high atomic number metals onto oxygen or hydroxyl rich surfaces

Methods for making layered materials and layered materials including high atomic number metals and metal alloys adhered to surfaces are provided. Such surfaces may be oxygen or hydroxyl rich surfaces. Certain methods include depositing a tie down layer of a first metal or metal alloy particles onto a first surface of base material and depositing a high atomic number metal or metal alloy layer onto the first surface after depositing the tie down layer, wherein particles comprising the high atomic number metal or metal alloy layer have a higher atomic number than the first metal or metal alloy particles.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Measurement of Spray Chamber Ignition Delay and Cetane Numbers for Aviation Turbine Fuels

Experiments using pure compounds, National Jet Fuels Combustion Program (NJFCP) test fuels, and commercial jet fuels were conducted to demonstrate the equivalence of the indicated cetane number (ICN) and derived cetane number (DCN) for jet fuels. The calibrated range for ICN was also extended to lower cetane number (CN) values (5 to 35) to allow CN quantification for jet fuel synthetic blending components (SBCs) with low CN. ICN and DCN were shown to be highly correlated for values above about 30. This study presents the most comprehensive comparison of these two methods published to date. Because of the importance of low-volume test methods for early-stage SBC production process development, we demonstrated that ICN and DCN can be accurately measured with 15 mL of fuel, well below 40 to 100 mL required by standard methods. ICN or DCN is important for jet fuels because fuels with lower CN are more prone to lean blowout (LBO), an undesirable operational failure in a jet engine. Comparing data on a fuel-to-air ratio (Φ) at LBO for the NJFCP fuels shows similar linear correlations for ICN and DCN. Ignition delay measurements at lower-pressure and higher-temperature conditions may be more directly relevant to LBO. At 675 °C, 0.5 MPa, and a global Φ of roughly 0.68, ignition delay time correlations to LBO were similar to those produced from DCN and ICN. A much weaker correlation was obtained with a global Φ value of 0.34.

09 BIOMASS FUELS↗

DOE OSTI2025

Foaming prediction in pure liquids from dimensionless numbers inspired by the theory of fluid behavior for drops

Foaming prediction is critical for selecting materials and designing processes in industries such as bioprocessing and gas processing. Existing models lack the generality needed for a wide range of materials and overlook the foaming behavior in pure liquids. Here, this work presents a novel method for predicting foaming in pure liquids based on their density, surface tension, and viscosity, using Reynolds ( Re ) and Ohnesorge ( Oh ) numbers. A foaming prediction map, leveraging the theory of fluid drop behavior, was developed by plotting these numbers. This map delineates distinct non-foaming and foaming regions, functioning as a binary classifier for foaming predictions. The map was fitted and validated through shake test experiments on 46 liquids, demonstrating reliable predictions, except for a specific region characterized by small Oh and large Re numbers. This region corresponded to relatively low foam stability and high turbulence, making foaming predictions challenging for liquids in this category.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗