SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Here, understanding the nature of structural evolution of Cu nanocatalysts during CO 2 electroreduction is a long-standing question in catalysis science. Now, operando electron microscopy techniques correlated with X-ray spectroscopy and first-principles modelling demonstrate that the reaction products themselves drive the structural evolution in Cu nanocubes.
Cell-level degradation processes impact the economic viability and large-scale deployment prospects for both established and emerging photovoltaic (PV) technologies. This project addresses the need to develop experimental and device-modeling approaches for studying cell-level degradation processes in photovoltaic (PV) devices using a variety of characterization techniques that provide access to complementary material and device properties. Our results demonstrate that by coupling characterization results with device modeling it is possible to develop comprehensive understanding of processes leading to performance limitations and degradation. This project developed a suite of novel measurement techniques including pulsed-light-bias operando X-ray and photoelectron spectroscopy (popXPS), light-biased scanning microwave impedance microscopy (sMIM), and near-field transport imaging (TI). In addition, operando characterization methodologies and in situ stressing capabilities have been developed and applied for techniques including electron-beam-induced current (EBIC), cathodoluminescence (CL), and Kelvin probe force microscopy (KPFM). Device-physics models were developed and applied to simulate correlative, multi-mode measurements to extract material and device parameters that control performance degradation. These characterization and modeling techniques were applied in a multi-mode approach to probe cell-level degradation mechanisms in Cd(Se,Te) and hybrid perovskite PV devices. Together these efforts contribute to foundational PV degradation science by establishing a framework for understanding PV performance degradation at the cell level and benefit the U.S. PV industry by providing resources in the form of novel experimental capabilities, knowledge gained, and available expertise that can accelerate research and development of improved PV device materials and architectures. The project provided a comprehensive understanding of degradation in baseline Cd(Se,Te) solar cells provided by our collaborators at Colorado State University (CSU). EBIC and CL-based measurements and revealed unusual collection and recombination profiles in these devices, which underwent significant changes with during stressing. KPFM and operando XPS measurements showed that device stressing permanently alters energy-band alignments at the (Mg,Zn)O/Cd(Se,Te) interface, which in turn account for an observed loss in fill factor. Studies on hybrid perovskite devices were hampered to a significant extent by delays related to the pandemic. Nevertheless, a set of hybrid perovskite devices (supplied through an NREL-industry partnership) were stress tested and characterized with techniques including EBIC, sMIM, popXPS/popUPS and optically excited TI. Available results from these measurements informed the device modeling effort and suggest that defects and related band offsets at the C60/LiF/hybrid perovskite interface are the primary source of degradation in these devices.
Catalytic materials are an essential component of the chemical industry. They find applications in everything from fine chemical manufacturing to greenhouse gas mitigation. They are indispensable for developing a sustainable future. Their development has been continuous, from early trial and error efforts to the first fundamental insights gained through surface science, to modern in-situ characterization and computational predictions. The accumulation of knowledge on the working principles of catalytic surfaces allowed designing and producing better systems with improved performance. Even though tremendous progress has been made thanks to surface science techniques, these studies are usually performed under ultra-high vacuum and are therefore limited in their applicability to more relevant industrial conditions. The control over size, shape and composition in colloidal nanocrystals makes them formidable precursors for model heterogeneous catalysts. These model systems enable linking the insights from surface science studies via in-situ and operando studies to realistic catalytic reaction conditions. In this review, colloidal nanocrystals are presented as powerful building blocks for catalytic materials in the quest for fundamental understanding. A review of the principal methods to produce colloidal nanocrystals with a high level of control is reported, complemented by procedures for how to prepare active catalysts from these particles. Examples and guidelines for the catalytic applications of these materials revolve around the three guiding objectives in catalysis science: activity, selectivity and stability. This work will be limited to examples of this colloidal approach in the areas of thermal, electro- and photocatalysis. In conclusion, the exposed approaches can be used and extended to many other areas of catalysis science, thus providing a new avenue to explore fundamentals and applications of catalytic materials.
Gases are often by-products of battery materials during cell formation and degradation, affecting the cycle life and safety of rechargeable batteries. However, understanding gas-mediated (electro)-chemical reactions and nanoscale structural transformations during the synthesis of battery electrode materials remains challenging because of the lack of suitable characterization routes and the complexity of the interplay between thermodynamics and kinetics. Here, in this study, we use operando synchrotron X-ray diffraction, in situ transmission X-ray microscopy and multiscale modelling to elucidate the reaction pathways and microstructural defect development of earth-abundant Mn-rich layered oxides as positive electrode materials for sodium-based batteries. In particular, we demonstrate the dominant role of CO 2 over O 2 and H 2 O (g) in modulating the competition between entropy and enthalpy during solid-state synthesis. Using Ni 0.25 Mn 0.75 CO 3 as a model precursor, we reveal that CO 2 generation favours the formation of entropy-driven metastable intermediates, suppresses closed pore/nanovoids formation and decreases chemical heterogeneity and residual lattice strain of Mn-rich layered oxides during the synthesis. This result motivates a fast-sintering strategy to promote CO 2 release, which ultimately leads to improved chemo-mechanical and electrochemical stability of the Mn-rich positive electrodes when tested in non-aqueous Na metal coin cells.
Compounds of interest for ion storage in advanced batteries frequently exhibit phase transformations as the working ion concentration varies. Under large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium. This program combines experiments and theory to understand the phase transition behavior of ion insertion compounds when electrochemically driven far from equilibrium. As model systems, we focus on alkaline metal phosphates AMPO4 (A = alkali; M = first row transition metal) of olivine structure, which are both technologically interesting and ideally suited for fundamental study due to the ability to systematically tune transformation strain, and along with it, the phase transformation pathway. Behavior in compositions having large transformation strains (~15 vol%) requiring plasticity for strain accommodation is emphasized. Experimental techniques include operando characterization of structure while simultaneously varying electrokinetic parameters, and high resolution microscopy of nanoscale and interfacial phenomena. Phase-field modeling is used to model the thermodynamics and kinetics of competing transformation pathways, extended to include the effects of plasticity, and integrated with porous electrode kinetic theory to treat multi-particle effects. Success in this project will lead to an ability to design ion storage compounds with predictable transformation pathways, electrochemical kinetics, capacity utilization, and durability. New technologically important compounds may also be discovered.
Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.
Abstract In situ attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR‐SEIRAS) is often used to investigate the near‐surface electrocatalytic reaction environment. However, there is a gap in directly correlating the near‐surface reaction environment with electrocatalytic reaction rates. To that end, we designed an electrochemical flow reactor for operando electrochemical ATR‐SEIRAS and demonstrate its capability with the CO 2 reduction reaction (CO 2 RR). Roughened gold catalyst thin films are prepared on ATR silicon crystals as a model system to probe local species under CO 2 RR conditions in 0.1 M KHCO 3 . We measured changes in the interfacial CO 2 concentration as a function of applied potential and electrolyte flow rate in operando , allowing us to correlate the changes in reaction rates with the observed CO 2 concentration. Including the choice of the catalyst and electrolyte, coupling hydrodynamic control with ATR‐SEIRAS in this platform enables investigations of how the local microenvironment affects the activity and selectivity of electrochemical reactions.
Ion-insertion compounds for advanced batteries frequently exhibit phase transformations as the concentration of the working ion varies. Under the large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium and exhibit phase transition behavior not seen in other materials. An improved understanding of phase transformation pathways in electrode materials upon cycling will lead to new materials design concepts and electrochemical duty cycle management strategies that improve capacity utilization at high charge/discharge rates, reduce voltage and capacity hysteresis, and extend battery life. The main goal of this project is to develop a predictive understanding of the phase transition behavior of battery compounds when electrochemically driven far from equilibrium through a combined experimental- theoretical approach. Research focuses on elucidating how the phase transition behaviors in a diverse group of selected model systems (olivines, lithium metal, etc.) are regulated by various factors including transformation strains, plasticity, metastable transformation pathways, electrode microstructure, surface reaction and ion diffusion kinetics, and what are the unique features of phase transitions in battery compounds. To this end, operando X-ray-based characterization techniques are applied to interrogate the structure and composition evolution of electrode materials and interfaces at nano- and meso-scales. Mesoscale modeling techniques such as phase-field simulation are employed to shed light on the experimental observations and establish a unified framework for describing phase transition behaviors in battery compounds.
Despite its central role in photoelectrochemical (PEC) water splitting, the mechanistic pathway of water oxidation on metal oxides remains unresolved, with population-based and Butler–Volmer (BV) models offering distinct views on how surface valence band holes drive the reaction. Here, we bring together these two perspectives by combining operando photoinduced absorption (PIA) spectroscopy with photocurrent analyses on α-Fe 2 O 3 (hematite) photoanodes as a function of light intensity. We find a crossover from population-controlled, rate law water oxidation at low hole densities to a BV-like, potential driven regime at high densities, triggered by band edge unpinning once surface M–OH species are fully oxidized, and excess holes accumulate without compensation. This mechanistic transition unifies competing models of interfacial charge transfer and reveals design principles for optimizing water oxidation in metal oxide photoelectrodes.
Here, enabling practical utilization of layered R $\bar{3}$ m positive electrodes near full delithiation requires an enhanced understanding of the complex electrode–electrolyte interactions that often induce failure. Using Li[Ni 0.8 Co 0.15 Al 0.05 ]O 2 (NCA) as a model layered compound, the chemical and structural stability in a strenuous thermal and electrochemical environment was explored. Operando microcalorimetry and electrochemical impedance spectroscopy identified a fingerprint for a structural decomposition and transition-metal dissolution reaction that occurs on the positive electrode at full delithiation. Surface-sensitive characterization techniques, including X-ray absorption spectroscopy and high-resolution transmission electron microscopy, measured a structural and morphological transformation of the surface and subsurface regions of NCA. Despite the bulk structural integrity being maintained, NCA surface degradation at a high state of charge induces excessive transition-metal dissolution and significant positive electrode impedance development, resulting in a rapid decrease in electrochemical performance. Additionally, the impact of electrolyte salt, positive electrode surface area, and surface Li 2 CO 3 content on the magnitude and character of the dissolution reaction was studied.
Structural heterogeneity in solid-state batteries can impact material utilization and fracture mechanisms. Crystallographically oriented lithium cobalt oxide film cathodes serve as a model electrode system for exploring how void distribution contributes to stress relief and build up during cycling. Real- and reciprocal-space operando and ex situ synchrotron based experiments are utilized to understand structural changes across multiple length scales contribute to stress generation and fracture. Nanotomography uncovers a depth-dependent porosity variation in the pristine electrode and highlights preferential fracture in regions of lower porosity during delithiation. Energy-dispersive X-ray diffraction and 3D X-ray absorption near-edge spectroscopy (XANES) reveal the underutilization of cathode material in these regions. 3D XANES also confirms preferential delithiation near the sub-grain boundaries. Chemo-mechanical modeling coupled with site-specific mechanical characterization demonstrate how stress accumulation in dense regions of the electrode leads to fracture and underutilization of active material. In conclusion, our findings reveal the importance of materials design to alleviate stress in small-volume changing cathodes.
We developed a novel operando Raman spectroscopy method for investigation of hydrogen (H) isotope exchange reactions in the lithium aluminate (γ-LiAlO 2 ) that allows modeling of tritium behaviors in high temperature and in an irradiated environment. The lithium aluminate pellet is a main component in the Tritium-Producing Burnable Absorber Rod (TPBAR). We used deuterium ( 2 H or D) as a surrogate to simulate tritium ( 3 H or T). We used a surface analysis tools in situ/operando Raman spectroscopy to observe the transformation OH and OD compositional changes. We also used ToF-SIMS to analyze the lithium aluminate pellet control sample to build the base line for future in situ/operando analysis. To conduct operando Raman spectroscopy, we developed a custom reaction cell with a detachable micro heater using microelectromechanical systems (MEMS) and 3D printing techniques. Multiple versions were developed and tested. Using the new reaction cell, we demonstrated operando Raman spectroscopy of water (H 2 O) and deuterated water (D 2 O) with nitrogen (N 2 ) exposure onto the lithium aluminate (LiAlO2) pellet specimen, respectively, using a wet gas injection setup. We also successfully developed a detachable microheater that can heat up to ~250°C for ~90 mins. The Raman spectra did not show clear H 2 O and D 2 O characteristic peaks, which indicates that introducing H 2 O and D 2 O onto the surface of the pellet is challenging due to its dense structure nature. Our efforts suggest that various improvements are needed, such as increasing reaction cell operating gas pressure and thinning pellet sample thickness, to obtain meaningful measurements.
Rapid, in-situ Li-ion battery state-of-health (SOH) quantification is challenging. Li-ion battery aging can vary significantly with chemistry, operating conditions, cycling demands, electrode design, and operation history. As a cell ages, optimal and safe operating conditions need to be adapted to account for battery degradation by tracking critical aging modes such as loss-of-lithium-inventory (LLI), loss-of-active-material (LAM) in either electrode, and/or impedance rise. This manuscript describes a framework for identifying battery aging modes in-operando using fast-rate voltage charge/discharge responses. The framework uses a physically based Li-ion battery model to produce synthetic high-rate responses at aged states. The aging model is calibrated against experimental data from cells with different electrode loadings and cycled under a variety of fast-charging conditions (1 h, 15 min, 10 min, and 7 min charging). The synthetically generated high-rate responses at aged states are then used to train a deep-learning model to identify real cell state-of-health from fast charge/discharge battery voltage responses. The synthetically trained deep-learning model performance is validated by comparing to standard incremental capacity analysis and half-cell measurements. Finally, the framework demonstrates the benefits of using high-rate physics-based models to generate synthetic data for training deep-learning models.
Ammonia (NH 3 ) is being considered as a practical means to transport hydrogen (H 2 ) because of its higher volumetric energy density for the same temperature and pressure. Thermodynamics suggest high temperature is needed to decompose NH 3 to nitrogen (N 2 ) and H 2 . Furthermore, overcoming decomposition kinetic barriers requires a catalyst. Via density functional theory, we study this reaction on a model catalyst: the close-packed (110) facet of α-Fe. Specifically, we predict detailed in-operando temperature- and pressure-dependent surface phase diagrams on this benchmark catalyst that offer insights for the design of optimal NH 3 decomposition catalysts. Here, we explore the equilibrium composition(s) of the Fe(110) surface when exposed to NH 3 –H 2 mixtures. Further, we predict that both N and NH partially cover the Fe(110) surface at 300–400 °C (far above the NH 3 decomposition-formation coexistence temperature at standard partial pressures of 1 bar: ~ 180 °C) and 2–4 bar of total reactor pressure. At the equilibrium N/NH coverage, these species inhibit coadsorption of H, indicating that direct H 2 production may occur. However, from thermodynamics alone, removal of N/NH as N 2 (g) is extremely unfavorable even at these elevated temperatures–effectively deactivating the surface toward further NH 3 decomposition. Thus, catalysts that remain active toward N–H bond breaking but with weakened N binding relative to Fe are needed to enable high-turnover catalytic NH 3 decomposition to release H 2 .
Ammonia (NH 3 ) is an energy-rich molecule that is routinely synthesized from nitrogen (N 2 ) and hydrogen (H 2 ). NH 3 ’s more favorable physical properties compared to H 2 suggests it may offer a way to more conveniently store, transport, and, when needed, extract H 2 via thermal decomposition. However, the high kinetic barrier and endoergicity to decompose to H 2 and N 2 require high temperatures. The standard reaction free energy indicates nearly 100% thermodynamic conversion to the diatomic molecules only at ~673 K and higher. However, even at these temperatures, a catalyst, e.g., iron (Fe), is needed for favorable kinetic conversion. Here, in this study, we explore via density functional theory the kinetics of NH 3 decomposition on the most stable facet of body-centered cubic Fe, namely, (110), under typical high-temperature and finite-pressure operando conditions. We predict coverage-dependent energetics of elementary surface reactions, often neglected in atomic-scale modeling. From these models, we find the recombinative desorption of adsorbed N as N 2 is rate-determining at 573.15–773.15 K and even at an extreme case of 1173.15 K. From microkinetic modeling, we find that the steady-state turnover frequencies (TOFs) for N 2 and H 2 generation rates (r$_{H_2}$) depend exponentially on temperature. The catalyst achieves a steady-state TOF of 36.4 s –1 and an r$_{H_2}$ of 0.107 μmol cm –2 s –1 for a feed of 1.8 bar NH 3 with 0.2 bar H 2 at 1173.15 K. However, at 773.15 K, with the same feed composition and velocity, the steady-state TOF and r$_{H_2}$ decrease to 0.14 s –1 and 4.10 × 10 –4 μmol cm –2 s –1 , respectively, as the process is significantly hindered by slow N 2 desorption. Although at first glance counterintuitive, our simulations suggest that surface modifications that reduce Fe’s reactivity toward NH x species should enhance its overall NH 3 decomposition activity.
Solar-driven water splitting requires sufficient photovoltage to drive both water oxidation and proton reduction. Understanding the factors driving and limiting photovoltage generation is therefore crucial to optimizing photoelectrode design but has proven challenging to determine under operando conditions for photoanodes driving slow multiredox reactions such as water oxidation. In this work, operando optical spectroscopy is employed to measure the hole quasi-Fermi level (E F,p ) position in model hematite photoanodes as a function of applied bias and light intensity. The quasi-Fermi level splitting determined from these data are shown be in excellent agreement with the directly measured photovoltages, demonstrating the primarily electrochemical rather than primarily electrostatic origin of photovoltage in these photoelectrodes. E F,p pinning is observed at low light intensities and biases, indicative of hole trap states lying ∼0.2 eV above the valence band edge with a density of ∼1 nm −2 . Hole accumulation in these trap states is correlated with first order water oxidation. At higher light intensities and/or more anodic bias, E F,p becomes unpinned, assigned to saturation of these trap states, and correlated with the onset of third order water oxidation to molecular oxygen. Comparison with rate law analyses for other photoanodes indicates that such hole trap states may be a ubiquitous feature of metal oxides and suggests that materials processing strategies to suppress the density of such states would be a promising strategy to enhance photoanode performance.
Graphene oxide (GO) is a two-dimensional, mechanically strong, and chemically tunable material for separations. Elucidating GO–ion–water interactions at the molecular scale is highly important for predictive understanding of separation systems. However, direct observations of the nanometer region by GO surfaces under operando conditions are not trivial. Therefore, thin films of GO at the air/water interface can be used as model systems. With this approach, we study the effects of alkali metal ions on water organization near graphene oxide films at the air/water interface using vibrational sum frequency generation (SFG) spectroscopy. Here, we also use an arachidic acid Langmuir monolayer as a benchmark for a pure carboxylic acid surface. Theoretical modeling of the concentration-dependent sum frequency signal from graphene oxide and arachidic acid surfaces reveals that the adsorption of monovalent ions is mainly controlled by the carboxylic acid groups on graphene oxide. An in-depth analysis of sum frequency spectra reveals at least three distinct water populations with different hydrogen bonding strengths. The origin of each population can be identified from concentration dependent variations of their SFG signal. Interestingly, an interfacial water structure seemed mostly insensitive to the character of the alkali cation, in contrast to similar studies conducted at the silica/water interface. However, we observed an ion-specific effect with lithium, whose strong hydration prevented direct interactions with the graphene oxide film.
Here, the structure of pristine AgFeO 2 and phase makeup of Ag 0.2 FeO1.6 (a one-pot composite comprised of nanocrystalline stoichiometric AgFeO 2 and amorphous γ-Fe 2 O 3 phases) was investigated using synchrotron x-ray diffraction. A new stacking-fault model was proposed for AgFeO2 powder synthesized using the co-precipitation method. The lithiation/de-lithiation mechanisms of silver ferrite, AgFeO 2 and Ag 0.2 FeO 1.6 were investigated using ex-situ, in-situ, and operando characterization techniques. An amorphous γ-Fe 2 O 3 component in the Ag 0.2 FeO 1.6 sample is quantified. Operando XRD of electrochemically reduced AgFeO 2 and Ag 0.2 FeO 1.6 composites demonstrated differences in the structural evolution of the nanocrystalline AgFeO 2 component. As complimentary techniques to XRD, ex-situ x-ray Absorption Spectroscopy (XAS) provided insight into the short-range structure of the (de)lithiated nanocrystalline electrodes, and a novel in-situ high energy x-ray fluorescence nanoprobe (HXN) mapping measurement was applied to spatially resolve the progression of discharge. Based on the results, a redox mechanism is proposed where the full reduction of Ag + to Ag0 and partial reduction of Fe 3+ to Fe 2+ occur on reduction to 1.0 V, resulting in a Li 1+y Fe III Fe II yO 2 phase. The Li 1+y Fe III Fe II yO 2 phase can then reversibly cycle between Fe 3+ and Fe 2+ oxidation states, permitting good capacity retention over 50 cycles. In the Ag 0.2 FeO 1.6 composite, a substantial amorphous γ-Fe 2 O 3 component is observed which discharges to rock salt LiFe 2 O 3 and Fe 0 metal phase in the 3.5 – 1.0 V voltage range (in parallel with the AgFeO 2 mechanism), and reversibly reoxidizes to a nanocrystalline iron oxide phase.