Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen evolution reaction catalyst activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Rapid microwave-assisted preparation of high-performance bifunctional Ni3Fe/Co-N-C for rechargeable Zn-air battery

Precious metal-free bifunctional catalysts offer scalable possibilities for achieving oxygen cathodes in rechargeable metal-air batteries. Literature thus far suggests that the oxygen reduction and evolution reactions (i.e ORR and OER) take place at different active sites. However, the design and preparation of oxygen electrocatalysts with high-performance is still a great challenge. This work develops a general approach to introduce a nanoparticle that offers oxygen evolution reaction sites onto an oxygen reduction reaction catalyst via rapid microwave treatment. The metal–organic frameworks (Co, ZIF-8) derived Co-N-C with high ORR performance is employed as a support to homogeneously disperse OER active Ni3Fe nanoparticles. Potentials of 1.54 V and 0.79 V have been achieved at current densities of 10 mA cm -2 for OER and 3 mA cm -2 toward ORR, respectively. The developed rechargeable Zn-air battery assembled with Ni 3 Fe/Co-N-C as an oxygen-electrode exhibits superior efficiency and robust durability, exceeding that of commercial Pt/C + IrO 2 . Furthermore, the satisfactory activity of our fabricated wristband shows the successfully practical application of flexible Zn-air batteries for wearable devices.

25 ENERGY STORAGE↗
DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxygen vacancy-rich amorphous FeNi hydroxide nanoclusters as an efficient electrocatalyst for water oxidation

Here, a one-pot strategy is presented to directly synthesize amorphous Fe x Ni y hydroxide nanoclusters (denoted as ANC-Fe x Ni y , <2 nm) with oxygen vacancies induced by ionic liquids. The ANC-Fe x Ni y catalyst presents abundant catalytic sites and high intrinsic conductivity. As such, the optimized ANC-Fe 1 Ni 2 exhibits high activity in oxygen evolution reaction (OER) with a Tafel slope of 39 mV dec –1 and an overpotential of 266 mV at 10 mA cm –2 . Notably, the optimized ANC-Fe 1 Ni 2 shows an extraordinarily large mass activity of 3028 A g FeNi –1 at the overpotential of 300 mV, which is ~24-fold of commercial RuO 2 catalyst. The superior activity of these Fe x Ni y hydroxide nanoclusters is ascribed to (i) the amorphous and distorted structure with abundant oxygen vacancies, and (ii) enhanced active site density by downsizing the ANC-Fe x Ni y clusters. This strategy provides a novel route for enhancing OER electrocatalytic performance and highly encouraging for the future application of amorphous metal hydroxides in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Graphene-supported single atom catalysts for high performance lithium-oxygen batteries

The optimal choice of d-block metals in single atom catalysts (SACs) is crucial for designing efficient electrocatalysts for activating the Oxygen reduction reaction (ORR)/ Oxygen evolution reaction (OER) in lithiumoxygen batteries (LOBs). Herein, we used the Quantum Mechanics methods to understand the origin of reactivity for a series of 16 d-block metals supported on nitrogen-doped graphene as SACs for ORR and OER in LOBs. Based on the Gibbs free energy calculations, we found that among the 16 SACs investigated, Zn-SAC exhibits the highest electrochemical activity with the lowest overpotential of 0.17 V. Here we then used machine learning (ML) to develop an intrinsic descriptor, phi, that correlates the catalytic activity with electronic and chemical properties of the catalytic centers at the M-N 4 active site on graphene surface. We established a linear relationship between phi and the catalytic activity that provides guidance for designing efficient SACs for electrocatalysis in LOBs. To validate these predictions, we report electrochemical measurements showing that Zn-SAC exhibits an ultra-stable cyclability with reduced overpotentials over Mo-SAC and nitrogen-doped graphene (NG), confirming our theoretical prediction. This fundamental work provides a deep understanding on the rational design of efficient SACs for OER/ ORR in LOBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Atomically Dispersed Silver Atoms Embedded in NiCo Layer Double Hydroxide Boost Oxygen Evolution Reaction

Abstract Bimetallic layered double hydroxides (LDHs) are promising catalysts for anodic oxygen evolution reaction (OER) in alkaline media. Despite good stability, NiCo LDH displays an unsatisfactory OER activity relative to the most robust NiFe LDH and CoFe LDH. Herein, a novel NiCo LDH electrocatalyst modified with single‐atom silver grown on carbon cloth (Ag SA ‐NiCo LDH/CC) that exhibits exceptional OER activity and stability in 1.0 m KOH is reported. The Ag SA ‐NiCo LDH/CC catalyst only requires a low overpotential of 192 mV to reach a current density of 10 mA cm −2 , obviously boosting the OER activity of NiCo LDH/CC (410 mV@10 mA cm −2 ). Inspiringly, Ag SA ‐NiCo LDH/CC can maintain its high activity for up to 500 h at a large current density of 100 mA cm −2 , exceeding most single‐atom OER catalysts. In situ Raman spectroscopy studies uncover that the in situ formed NiCoOOH during OER is the real active species. Hard X‐ray absorption spectrum (XAS) and density functional theory (DFT) calculations validate that single‐atom Ag occupying Ni site increases the chemical valence of Ni elements, and then weakens the adsorption of oxygen‐contained intermediates on Ni sites, fundamentally accounting for the enhanced OER performance.

Chemistry↗
DOE OSTI2022

Lithiation-Induced Defect Engineering to Promote Oxygen Evolution Reaction

Exploring efficient electrocatalysts for oxygen evolution reaction (OER) is an urgent need to advance the development of sustainable energy conversion. Though defect engineering is considered an effective strategy to regulate catalyst activity for enhanced OER performance, the controllable synthesis of defective oxides electrocatalysts remains challenging. Here, oxygen defects are introduced into NiCo 2 O 4 nanorods by an electrochemical lithiation strategy. By tuning in situ lithiation potentials, the concentration of oxygen defects and the corresponding catalytic activity can be feasibly regulated. In addition, the relationship between the changes in the defect density and electronic structure and the lithiation cut-off voltages is revealed. The results show that NiCo 2 O 4 nanorods undertook intercalation and two-step conversion reaction, in which the lithiation-induced conversion reaction gives rise to a CoO@NiO-based structure with higher defect density and lower oxidation states. As a result, the defective CoO@NiO-based catalyst exhibits exceptional OER activity with an overpotential of 270 mV at 10 mA cm -2 , which is about 74 mV below the pristine nanomaterials. In conclusion, this research proposes a novel strategy to explore high-performance catalysts with structural stability and defect control.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mitigating Hydrogen-Induced Degradation of Iridium Anodes in Proton Exchange Membrane Water Electrolyzers

One promising method for reducing precious metal usage in proton exchange membrane water electrolysis is lowering iridium (Ir) loading at the anode. However, low-loading Ir catalysts often suffer from poor stability under high current densities. In this study, hydrogen (H2) crossover from the cathode to the anode is identified as a key degradation pathway. Temperature-programmed reduction confirms the reduction of IrO2 at 80 °C in a hydrogen environment, highlighting the vulnerability of IrO2-based catalysts to H2 exposure. To mitigate this effect, palladium (Pd) is introduced as an anode additive, acting as an H2 oxidation catalyst and mitigating IrO2 reduction. This protective role is verified by inductively coupled plasma optical emission spectroscopy and in situ X-ray absorption spectroscopy, showing significantly suppressed Ir dissolution at 80 °C under H2 flow when an O-covered Pd surface is present at oxygen evolution reaction potentials. Results from the current study identify a new strategy in improving activity and durability of catalysts in electrolyzers.

58 GEOSCIENCES↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗
DOE OSTI2024

Probing the active sites of oxide encapsulated electrocatalysts with controllable oxygen evolution selectivity

Electrocatalysts encapsulated by nanoscopic overlayers can control the rate of redox reactions at the outer surface of the overlayer or at the buried interface between the overlayer and the active catalyst, leading to complex behavior in the presence of two competing electrochemical reactions. This study investigated oxide encapsulated electrocatalysts (OECs) comprised of iridium (Ir) thin films coated with an ultrathin (2–10 nm thick) silicon oxide (SiO x ) or titanium oxide (TiO x ) overlayer. The performance of SiO x |Ir and TiO x |Ir thin film electrodes towards the oxygen evolution reaction (OER) and Fe(II)/Fe(III) redox reactions were evaluated. An improvement in selectivity towards the OER was observed for all OECs. Overlayer properties, namely ionic and electronic conductivity, were assessed using a combination of electroanalytical methods and molecular dynamics simulations. SiO x and TiO x overlayers were found to be permeable to H 2 O and O 2 such that the OER can occur at the MO x |Ir (M = Ti, Si) buried interface, which was further supported with molecular dynamics simulations of model SiO 2 coatings. In contrast, Fe(II)/Fe(III) redox reactions occur to the same degree with TiO x overlayers having thicknesses less than 4 nm as bare electrocatalyst, while SiO x overlayers inhibit redox reactions at all thicknesses. This observation is attributed to differences in electronic transport between the buried interface and outer overlayer surface, as measured with through-plane conductivity measurements of wetted overlayer materials. These findings reveal the influence of oxide overlayer properties on the activity and selectivity of OECs and suggest opportunities to tune these properties for a wide range of electrochemical reactions.

08 HYDROGEN↗
DOE OSTI2022

Breaking $\mathrm{OER}$ and $\mathrm{CER}$ scaling relations via strain and its relaxation in $\mathrm{RuO}$ 2 (101)

Green hydrogen production from abundant water sources is an important component of renewable energy storage. Water oxidation catalysts are typically considered bound by adsorbate scaling relations, limiting their activity for the oxygen evolution reaction (OER) as well as selectivity between OER and the chlorine evolution reaction (CER) that compete in saline water streams. RuO 2 is highly active for both reactions, and recent measurements have shown the OER activity is greater on undercoordinated, high index facets compared to the lowest-energy (110) facet often studied. The growth of such orientations as epitaxial films, however, can result in appreciable strain and potential surface faceting via its relaxation. Here, we find the activity and selectivity towards OER and CER vary with thickness in epitaxial (101) RuO 2 thin films: OER activity decreases 4x as film thickness increases from 8 nm to 48 nm, while CER activity is comparable. Thus, strain and its relaxation can be used to break scaling relationships between OER and CER, highlighting the important role that defects play in selective oxidation processes on RuO 2 in chloride-containing media.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A first principles analysis of potential-dependent structural evolution of active sites in Fe-N-C catalysts

Fe-N-C (iron–nitrogen–carbon) electrocatalysts have emerged as potential alternatives to precious metal-based materials for the oxygen reduction reaction (ORR). However, the structure of these materials under electrochemical conditions is not well understood, and their poor stability in acidic environments poses a formidable challenge for successful adoption in commercial fuel cells. To provide molecular-level insights into these complex phenomena, we combine periodic density functional theory (DFT) calculations, exhaustive treatment of coadsorption effects for ORR reaction intermediates, including O and OH, and comprehensive analysis of solvation stabilization effects to construct voltage-dependent ab initio thermodynamic phase diagrams that describe the in situ structure of the active sites. These structures are further linked to activity and stability descriptors that can be compared with experimental parameters such as the half-wave potential for ORR and the onset potential for carbon corrosion and CO 2 evolution. The results indicate that pyridinic Fe sites at zigzag carbon edges, as well as other edge sites, exhibit high activity for ORR compared to sites in the bulk. However, edges neighboring the active sites are prone to instability via overoxidation and consequent site loss. The results suggest that it could be beneficial to synthesize Fe-N-C catalysts with small sizes and large perimeter edge lengths to enhance ORR activity, while voltage fluctuations should be limited during fuel cell operation to prevent carbon corrosion of overoxidized edges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Active Phase on SrCo 1–x Fe x O -δ (0 ≤ x ≤ 0.5) Perovskite for Water Oxidation: Reconstructed Surface versus Remaining Bulk

Perovskite oxides based on earth-abundant transition metals have been extensively explored as promising oxygen evolution reaction (OER) catalysts in alkaline media. The (electro)chemically induced transformation of their initially crystalline surface into an amorphous state has been reported for a few highly active perovskite catalysts. However, little knowledge is available to distinguish the contribution of the amorphized surface from that of the remaining bulk toward the OER. In this work, we utilize the promoting effects of two types of Fe modification, i.e., bulk Fe dopant and Fe ions absorbed from the electrolyte, on the OER activity of SrCoO 3-δ model perovskite to identify the active phase. Transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the surface amorphization of SrCoO 3-δ as well as SrCo 0.8 Fe 0.2 O 3-δ after potential cycling in Fe-free KOH solution. By further cycling in Fe-spiked electrolyte, Fe was incorporated into the amorphized surface of SrCoO 3-δ (SrCoO 3-δ + Fe 3+ ), yielding approximately sixfold increase in activity. Despite the difference in remaining perovskites, SrCoO 3-δ + Fe 3+ and SrCo 0.8 Fe 0.2 O 3-δ exhibited remarkably similar activity. These results reflect that the in situ developed surface species are directly responsible for the measured OER activity, whereas the remaining bulk phases have little impact.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Rationalizing Acidic Oxygen Evolution Reaction over IrO 2 : Essential Role of Hydronium Cation

The development of active, stable, and more affordable electrocatalysts for acidic oxygen evolution reaction (OER) is of great importance for the practical application of electrolyzers and the advancement of renewable energy conversion technologies. Currently, IrO 2 is the only catalyst with high stability and activity, but a high cost. Further optimization of the catalyst is limited by the lack of understanding of catalytic behaviors at the acid-IrO 2 interface. Here, in strong interaction with the experiment, we develop an explicit model based on grand-canonical density function theory (GC-DFT) calculations to describe acidic OER over IrO 2 . Compared to the explicit models reported previously, hydronium cations (H 3 O + ) are introduced at the electrochemical interface in the current model. As a result, a variation in stable IrO 2 surface configuration under the OER operating condition from previously proposed complete *O-coverage to a mixture coverage of *OH and *O is revealed, which is well supported by in situ Raman measurements. In addition, the accuracy of predicted overpotential is increased in comparison with the experimentally measured. More importantly, in this study, an alteration of the potential limiting step from previously identified *O→*OOH to *OH→*O is observed, which opens new opportunities to advance the IrO 2 -based catalysts for acidic OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Perovskite-Type Solid Solution Nano-Electrocatalysts Enable Simultaneously Enhanced Activity and Stability for Oxygen Evolution

A trade-off between catalytic activity and structural stability generally exists in oxygen evolution electrocatalysis, especially in acidic environment. This dilemma limits the development of higher-performance electrocatalysts that are required by next-generation electrochemical technologies. In this work it is demonstrated that the inverse catalytic activity–structural stability relation can be broken by alloying catalytically inert strontium zirconate with the other catalytically active perovskite, strontium iridate. This strategy results in an alloyed perovskite electrocatalyst with simultaneously improved iridium mass activity and structural stability, by about five times, for the oxygen evolution reaction under acidic conditions. The experimental and theoretical results suggest that the alloying strategy generates multiple positive effects, mainly including the reduction of catalyst size, the decrease of catalyst covalency, and the weakening of surface oxygen-binding ability. The synergistic optimization of bulk and surface properties, as a result, enhances the intrinsic activity and availability of surface iridium sites, whilst significantly inhibiting the surface cation corrosion during electrocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Wood Carbon Based Single-Atom Catalyst for Rechargeable Zn–Air Batteries

Low-cost and efficient oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) bifunctional electrocatalysts are vital for the applications of rechargeable Zn-air batteries (ZABs). Given the high catalytic activity of single-atom catalysts (SACs), preparing SACs on a large scale for ZABs is desirable but remains challenging. Herein, in situ formation of single-atom Fe-N-C catalysts on plate wood-based porous carbon is achieved via a facile Lewis acid pretreatment and carbonization process. Lewis acid FeCl3 pretreatment on the cell wall of wood not only produces abundant microchannels but also successfully introduces atomically dispersed Fe-N active species into the hierarchical structure. Such uniformly dispersive SACs on the hierarchical structure enhance the ORR/OER performance and durability. A ZAB using the catalyst in the cathode shows a high power density (70.2 mW cm -2 , at quasi solid state) and long-term stability. This work provides a new path for the large-scale preparation of high-performance SACs.

25 ENERGY STORAGE↗
DOE OSTI2021

Heterostructured Au–Ir Catalysts for Enhanced Oxygen Evolution Reaction

Electrochemical water splitting operated under acidic conditions provides a clean approach to generate hydrogen fuels. Currently, the sluggish kinetics of oxygen evolution reaction (OER) at the anode is a bottleneck limiting the acidic water splitting. Here, we report that the OER activity of Ir, one of the most commonly used OER catalysts, can be boosted by forming phase boundaries with Au. Mixed Au and Ir catalysts were synthesized on carbon paper electrodes, which underwent structural evolution under the OER environment to form an Au-Ir interface-rich structure. Compared with Ir catalyst, which requires an overpotential of ~393 mV to achieve a current density of 10 mA/cm 2 in 0.1 M HClO 4 electrolyte, the evolved Au-Ir catalyst shows a lower overpotential at ~351 mV. X-ray photoelectronic spectrum (XPS) study, in conjunction with electrochemical analysis on the surface-site-normalized activity, reveals that the improved OER performance is due to the presence of Au/Ir interfaces in the catalysts. In addition to Ir, the strategy of accelerating OER via Au/Ir interfaces has been further applied to IrCo, IrNi, and IrCu alloy catalysts. Here, with the broad applicability of the strategy demonstrated, this study opens a new route to design OER catalysts for efficient acidic water splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

LixNiO/Ni Heterostructure with Strong Basic Lattice Oxygen Enables Electrocatalytic Hydrogen Evolution with Pt-like Activity

The low-cost hydrogen production from water electrolysis is crucial for practical deployment of sustainable hydrogen economy, but is often constrained by the lack of active and robust electrocatalysts from Earth-abundant materials. We describe here an unconventional heterostructure composed of strongly coupled Ni-deficient LixNiO nanoclusters and polycrystalline Ni nanocrystals, and its exceptional activities toward hydrogen evolution reaction (HER) in aqueous electrolytes. The presence of unique lattice oxygen species with strong Brønsted basicity is a significant feature, which spontaneously split water molecules and effectively accelerate the sluggish Volmer H-OH dissociation step in neutral and alkaline HER. In combination with the unpreceded level of intimate LixNiO and Ni interfacial junctions that produces abundant “hotspots” for promoted hydride coupling, the catalyst exhibited kinetic activities almost identical as Pt/C and decent long term stability in universal pH.

Lu, Ke↗