SEARCH · Search NASA

Results for “oxygen generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Detection of atomic oxygen and its electronic coherence decays using time-resolved ultrafast coherent Raman scattering

We report the detection of atomic oxygen and quantitative measurements of its electronic Raman coherence decays in flames and low-temperature plasmas using time-resolved hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (CARS). Atomic oxygen was detected using the Raman transitions between the spin–orbit coupled triplet ground states. Atomic oxygen was generated in an H 2 /O 2 /Ar diffusion flame and an O 2 /Ar pulsed plasma discharge. Single exponential decays were observed for the O( 3 P 2 )–O( 3 P 1 ) Raman transition at 158.3 cm −1 and the O( 3 P 2 )–O( 3 P 0 ) Raman transition at 227 cm −1 . From the decay measurements, the atomic O Raman linewidths were obtained from 25 to 150 Torr in non-equilibrium plasma and at 760 Torr in a flame. Enhanced signal-to-noise ratios (SNRs) of atomic oxygen and atomic to molecular oxygen signal contrasts were obtained by taking advantage of electronic triplet coherence beating. Enhancement of up to seven times in the atomic O SNR was observed. Furthermore, we also found that the dephasing rates of O 2 (v = 0–3, N = 37) were similar, which provides evidence for the assumption that vibrational excitation does not influence the dephasing of diatomic molecular rotational CARS transitions.

Atomic and molecular spectroscopy↗

DOE OSTI2023

Engineering of Grain Boundaries in CeO 2 Enabling Tailorable Resistive Switching Properties

Abstract Defect engineering in valence change memories aimed at tuning the concentration and transport of oxygen vacancies are studied extensively, however mostly focusing on contribution from individual extended defects such as single dislocations and grain boundaries. In this work, the impact of engineering large numbers of grain boundaries on resistive switching mechanisms and performances is investigated. Three different grain morphologies, that is, “random network,” “columnar scaffold,” and “island‐like,” are realized in CeO 2 thin films. The devices with the three grain morphologies demonstrate vastly different resistive switching behaviors. The best overall resistive switching performance is shown in the devices with “columnar scaffold” morphology, where the vertical grain boundaries extending through the film facilitate the generation of oxygen vacancies as well as their migration under external bias. The observation of both interfacial and filamentary switching modes only in the devices with a “columnar scaffold” morphology further confirms the contribution from grain boundaries. In contrast, the “random network” or “island‐like” structures result in excessive or insufficient oxygen vacancy concentration migration paths. The research provides design guidelines for grain boundary engineering of oxide‐based resistive switching materials to tune the resistive switching performances for memory and neuromorphic computing applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Reconstructing Oxygen-Deficient Zirconia with Ruthenium Catalyst on Atomic-Scale Interfaces toward Hydrogen Production

Downsizing a catalyst nanoparticle (NP) to a single atom (SA) has proven to be highly effective in increasing catalytic activity and decreasing the amount of catalyst required for various electrochemical reactions. However, insufficient stability of the single-atom site catalysts (SACs) is still a significant challenge for their practical application. Here, SACs firmly bound to stable metal oxide NPs are proposed to dramatically increase the electrochemical activity and stability of SA-based catalysts for hydrogen evolution reaction (HER). Starting from a Ru-infiltrated, Zr-based metal-organic framework (MOF), the tetragonal zirconium oxide (ZrO 2-x ) NPs-embedded carbon matrix is fabricated as support through facile pyrolysis. Simultaneously, Ru SAs as active sites are well dispersed on the surface of ZrO 2-x NPs due to the generation of oxygen vacancies in the tetragonal ZrO 2-x . Finally, the Ru-ZrO 2-x SAC exhibits a 4–5 times higher mass activity than commercial Pt and Ru catalysts and superior durability due to strong metal-support interaction (SMSI) between Ru atoms and ZrO 2-x substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Temporal multi-omic analysis uncovers sex-biased molecular programs underlying skeletal muscle adaptation to endurance training

Background. Exercise training is known to benefit health and reduce disease risk. While adaptations in skeletal muscles are fundamental to many of the health benefits of exercise training, the common and sex-specific molecular regulators that mediate these adaptations remain to be fully elucidated. Methods. To this end, we leveraged skeletal muscle multi-omics data generated by the Molecular Transducers of Physical Activity Consortium (MoTrPAC), where 6 month-old male and female rats endurance trained for 1, 2, 4, or 8 weeks. Our objective was to identify shared and sex-specific multi-omic molecular responses to endurance training in skeletal muscle, and relate them to phenotypic adaptations. Results. We identified largely sexually-conserved transcriptomic and proteomic enrichments in the gastrocnemius, which correlated with skeletal muscle responses from a published exercise study in humans. We uncovered sex-consistent post-translational modifications, including decreased oxidation of MYH2 and deacetylation of the ß-oxidation enzyme HADHA. Pathway enrichment analyses revealed sex-specific remodeling across the acetylome, redox proteome, and phosphoproteome; females decreased mitochondrial protein oxidation and increased mitochondrial cristae proteins, indicative of enhanced redox buffering and mitochondrial efficiency. Despite observed decreases in the oxidation of key mitochondrial proteins, females displayed increases in the oxidation of proteins involved in glucose catabolism relative to males after 8 weeks of training, suggestive of sex-biased subcellular reactive oxygen species generation. Conclusions. This work shows a large portion of the adaptive response to endurance training in skeletal muscle is shared between females and males, while there are distinct and nuanced sex-specific adaptations that are evident, particularly at the level of post-translational regulation.

Many, Gina M.↗

DOE OSTI2025

An Active Oxygen Electrode for Proton-Conducting Solid Oxide Electrolysis Cells with High Faradaic Efficiency

Addressing the challenges posed by inferior electrochemical performance at low temperatures and the uncertain Faradaic efficiency (FE) represents a pivotal undertaking in the development of high performance and efficient proton-conducting solid oxide electrolysis cells (P-SOECs). In this work, a novel oxygen electrode material BaCo0.8Zr0.1Zn0.1O3-d (BCZZ) is first designed and synthesized. At 600 °C, P-SOECs with BCZZ oxygen electrode achieve an electrolysis current density of 1.98 A cm-2 with an ˜90% FE at 1.3 V. Utilizing 1-inch P-SOECs as a reliable platform, the effect of extrinsic operating conditions (i.e., steam concentration, voltage, current density, and temperature) and intrinsic properties of P-SOECs (i.e., electrolyte material and electrolyte thickness) on FE are further systemically investigated, both experimentally and theoretically.

08 - HYDROGEN↗

DOE OSTI2024

A hidden demethylation pathway removes mercury from rice plants and mitigates mercury flux to food chains

Dietary exposure to methylmercury (MeHg) causes irreversible damage to human cognition and is mitigated by photolysis and microbial demethylation of MeHg. Rice (Oryza sativa L.) has been identified as a major dietary source of MeHg. However, it remains unknown what drives the process within plants for MeHg to make its way from soils to rice and the subsequent human dietary exposure to Hg. Here we report a hidden pathway of MeHg demethylation independent of light and microorganisms in rice plants. This natural pathway is driven by reactive oxygen species generated in vivo, rapidly transforming MeHg to inorganic Hg and then eliminating Hg from plants as gaseous Hg°. MeHg concentrations in rice grains would increase by 2.4- to 4.7-fold without this pathway, which equates to intelligence quotient losses of 0.01–0.51 points per newborn in major rice-consuming countries, corresponding to annual economic losses of US$30.7–84.2 billion globally. Importantly, this discovered pathway effectively removes Hg from human food webs, playing an important role in exposure mitigation and global Hg cycling.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Regulating the Third Metal to Design and Engineer Multilayered NiFeM (M: Co, Mn, and Cu) Nanofoam Anode Catalysts for Anion-Exchange Membrane Water Electrolyzers

In this study, alkaline anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant platinum group metal (PGM)-free catalysts. Herein, the third metal is incorporated into NiFe-based catalysts to regulate their electronic structures and morphologies, aiming to achieve sufficient oxygen evolution reaction (OER) activity and performance in AEMWEs. The ternary NiFeM (M: Cu, Co, or Mn) catalysts are featured with multiple layered structures and nanofoam network morphologies, consisting of highly OER-active amorphous Ni-rich oxide shells and electrically conductive metallic alloy cores. The physical and electronic perturbations to the NiFe induced by a third element lead to a fine-tuning of the redox ability of the metal sites at the reaction centers, which breaks the scaling relationship between OH* and O* intermediates at the reaction centers. Thus, the unique structural configuration and electronic regulation simultaneously benefit catalytic activity and performance improvements. These NiFeM nanofoam catalysts demonstrated promising anode performance in actual AEMWEs, comparable to the IrO 2 reference, especially at high current densities. Notably, using various electrolytes (e.g., KOH solution or pure water) for AEMWEs exhibited a different performance trend among studied NiFeM catalysts, likely due to dynamic changes of catalysts under various OER environments.

25 ENERGY STORAGE↗

DOE OSTI2022

Structurally Defined Water‐Soluble Metallofullerene Derivatives towards Biomedical Applications

Abstract Endohedral metallofullerenes (EMFs) are excellent carriers of rare‐earth element (REE) ions in biomedical applications because they preclude the release of toxic metal ions. However, existing approaches to synthesize water‐soluble EMF derivatives yield mixtures that inhibit precise drug design. Here we report the synthesis of metallobuckytrio (MBT), a three‐buckyball system, as a modular platform to develop structurally defined water‐soluble EMF derivatives with ligands by choice. Demonstrated with PEG ligands, the resulting water‐soluble MBTs show superb biocompatibility. The Gd MBTs exhibit superior T 1 relaxivity than typical Gd complexes, potentially superseding current clinical MRI contrast agents in both safety and efficiency. The Lu MBTs generated reactive oxygen species upon light irradiation, showing promise as photosensitizers. With their modular nature to incorporate other ligands, we anticipate the MBT platform to open new paths towards bio‐specific REE drugs.

Li, Yanbang↗

DOE OSTI2022

Structurally Defined Water‐Soluble Metallofullerene Derivatives towards Biomedical Applications

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Ozonolysis of selenium: an alternative oxidation method for radiochemical separations of arsenic and selenium

Many arsenic and selenium radiochemical separation methods use hydrogen peroxide (H 2 O 2 ) to oxidize selenite (Se(IV)) to selenate (Se(VI)), but this reaction is challenging to control and replicate. Here, this study introduces a simple ozonolysis apparatus with an in-line oxygen-ozone generator and impinger system for rapid selenium oxidation in aqueous samples as an alternative to H 2 O 2 . The system quickly converts Se(IV) to Se(VI), enabling successful separations of arsenic-73 and selenium-75 with high recoveries using ion-exchange chromatography (1-X8). Compared to traditional H 2 O2 treatment, ozone oxidation is a faster and more easily controlled method for selenium redox chemistry.

and nuclear chemistry↗

DOE OSTI2021

Sequential oxidation-depolymerization strategies for lignin conversion to low molecular weight aromatic chemicals

Lignin is the largest source of bio-derived aromatic chemicals, and oxidative conversion of this polymeric material can generate valuable oxygenated aromatic compounds. Oxidative depolymerization of lignosulfonate feedstocks under alkaline conditions is used commercially for vanillin production. Recent studies have led to other oxidation methods that access different aromatic products from lignin in good yields. A particularly effective strategy that accesses some of the highest yields of aromatic monomers to date features a two-step process in which the oxidation of specific alcohol groups in lignin is followed by an oxidative, reductive, or redoxneutral step that cleaves the polymer into aromatic monomers and oligomers. Studies of model compounds have provided crucial mechanistic insights and contributed to the development of effective lignin depolymerization methods. Furthermore, this review provides a general overview of lignin depolymerization methods, followed by a survey of oxidation-depolymerization methods that access oxygenated aromatic monomers in good yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Influence of fuel ash on the recoverability of copper from the spent material of chemical looping combustion

Chemical looping combustion (CLC) is an advanced energy production technology that inherently separates the CO 2 generated. The oxygen needed for fuel conversion is supplied by the oxygen carrier. When using copper-based oxygen carriers, oxygen carrier attrition is a challenge to the process economics, unless the attrited copper that is mixed with fuel ash in the spent material can be recovered by, for instance, acid leaching. However, fuel ash may transform the attrited copper into certain complexes of low leachability (e.g., CuAl 2 O 4 ), hindering the copper recovery. In this study, the copper content in the spent material was first evaluated. The effects of ash composition and copper content on the occurrence mode of copper in spent material were predicted by thermodynamic modeling. Redox cycles of simulated spent materials based on various coal ashes were performed to reveal the characteristics of CuAl 2 O 4 /CuFe 2 O 4 formation. The CuO-Al 2 O 3 reaction was investigated under the temperatures and solid residence times experienced in CLC. The materials were analyzed by X-ray diffraction. The results suggest that the fuel ash with a high Al/Ca ratio may lower the recoverability of copper when the temperature is above 925 °C. The slow formation of CuFe 2 O 4 is not expected to affect the copper recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Oxidation states of iron and manganese in lignocellulose altered by the brown rot fungus Gloeophyllum trabeum measured in-situ using X-ray absorption near edge spectroscopy (XANES)

Brown rot fungi utilize iron as part of a chelator-mediated Fenton (CMF) reaction during wood biodegradation. Research suggests these fungi reduce Fe 3+ to promote oxygen radical generation resulting in depolymerization of the wood cell wall. High levels of Mn are also found in wood decayed by brown rot fungi. However, little is known about the oxidation states of Fe and Mn during the decay process. X-ray absorption near edge spectroscopy (XANES) can be used to examine metal oxidation states and coordination chemistry. In this work, XANES experiments were conducted on wood decayed by Gloeophyllum trabeum over 2–8 weeks with results showing that Mn 2+ and Fe 3+ predominated for metal oxidation states. However, Fe 2+ was present at sites of greater fungal growth In certain cases, the μXANES measurements showed that the fraction of Fe 2+ in the wood samples was as high as 50%. Localized areas of reduced iron corresponded with areas of greater fungal hyphal mass which is in agreement with how brown rot fungi decay wood via the CMF reaction. The limited change in oxidation state of Mn observed in wood with active fungal activity suggests that the role of manganese in CMF biodegradation chemistry should be further explored.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

NO 2 Interactions with MoO 3 and CuO at Atmospherically Relevant Pressures

NO x concentrations in some geographic regions are harmful to human health. Gas filters to trap NO x and other toxic chemicals contain metal oxides, including MoO 3 and CuO. These materials are also being investigated for NO x gas sensors. In a step to understand the fundamental adsorption mechanism in sensors and the effect on binding site availability in gas filters, ambient-pressure X-ray photoelectron spectroscopy (APXPS) was used to study the interaction of NO 2 with polycrystalline MoO 3 and CuO surfaces under pressures up to 0.01 Torr (14 parts per million volume (ppmv)). Density functional theory-based computational modeling was performed to reveal the mechanisms of NO 2 interactions with the MoO 3 (010) and CuO(111) surfaces to aid interpretation of the experimental results. With pressure dependence, NO 2 interacts with reduced Mo 5+ atoms generated by oxygen vacancies and abstracts hydrogen atoms from hydroxyl groups on MoO 3 without accumulating N-containing species on the surface; vacancy-induced electronic states in the band gap are also removed, hinting toward an increase in the resistivity of the material. N-containing species begin accumulating on the CuO surface at atmospherically relevant pressures of 140 ppbv. NO 2 only decomposes at oxygen vacancy sites of CuO. The nitrogen species leave the CuO surface upon evacuation, highlighting the importance of in situ surface characterization when studying gas sensing and adsorption mechanisms. Finally, these results imply that NO 2 removes hydroxyl and O vac binding sties on these materials when used in gas filtration and sensing applications. Furthermore, the results show the key role of O vac sites in the gas sensing mechanism of MoO 3 and highlight the potential of APXPS for further studies of gas sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Aliovalent Doping of CeO 2 Improves the Stability of Atomically Dispersed Pt

Atomically dispersed supported catalysts hold considerable promise as catalytic materials. The ability to employ and stabilize them against aggregation in complex process environments remains a key challenge to the elusive goal of 100% atom utilization in catalysis. In this work, using a Gd-doped ceria support for atomically dispersed surface Pt atoms, we establish how the combined effects of aliovalent doping and oxygen vacancy generation provide dynamic mechanisms that serve to enhance the stability of supported single atom configurations. Using correlated, in situ X-ray absorption, photoelectron and vibrational spectroscopies for analysis of the samples on the two types of support (with and without Gd doping), we establish that the Pt atoms locate proximal to Gd dopants, forming a speciation that serves to enhance the thermal stability of Pt atoms against aggregation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Tandem Catalytic Antioxidant Nanoparticles Comprising Cerium Carbonate and Photoactive Metal Oxides

While photoactive metal oxides such as TiO 2 find widespread use in paints and coatings as well as cosmetics and suncare products, they also generate reactive oxygen species (ROS), which degrade materials and are associated with human-health pathologies. Here, we demonstrate a robust and potent catalytic antioxidant consisting of earth-abundant cerium carbonate nanoparticles and micron-size Ce 2 (CO 3 ) 3 . 8H 2 O, which are characterized by powder X-ray diffraction and scanning nanobeam electron diffraction. When dispersed with photoactive metal oxides, these cerium carbonate catalysts decrease the photodecomposition rate of organic dyes and commercial pigment colorants in aqueous media by up to 820-fold, as well as in acrylic coatings. X-ray photoelectron spectroscopy and kinetic experiments support the same tandem catalysis mechanism of photoprotection when using both micron-size Ce 2 (CO 3 ) 3 . 8H 2 O and cerium carbonate nanoparticles. This mechanism involves ROS disproportionation (catalyzed by cerium carbonate) and H 2 O 2 decomposition (partially catalyzed by TiO 2 ) pathways, both of which cerium carbonate also catalyzes on its own, crudely mimicking the function of the cascade system of superoxide dismutase and catalase enzymes. When cerium carbonate nanoparticles were dispersed at 2 wt % in polymethylmethacrylate, the transparency of the polymer film was preserved and the photo-oxidative degradation of the polymer was prevented following UV irradiation at 254 nm, which otherwise resulted in the loss of optical properties and hydroxylation as characterized by ATR-FTIR spectroscopy, in the control polymer lacking cerium carbonate. Similar observations were made regarding color preservation in paint films comprising dye and insoluble commercial colorant pigments. The material chemistry associated with this photoprotection catalysis is subtle and emphasizes the importance of both Ce(III) and carbonate together, as both CePO 4 and Na 2 CO 3 are inactive. In conclusion, this emphasis is also apparent in comparisons of photoprotection catalysis with previously reported cerium oxide nanoparticles, which are significantly less active compared with Ce 2 (CO 3 ) 3 . 8H 2 O under the same conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Development of Half-Sandwich Ru, Os, Rh, and Ir Complexes Bearing the Pyridine-2-ylmethanimine Bidentate Ligand Derived from 7-Chloroquinazolin-4(3H)-one with Enhanced Antiproliferative Activity

Kinesin spindle protein (KSP) inhibitors are one of the most promising anticancer agents developed in recent years. Herein, we report the synthesis of ispinesib-core pyridine derivative conjugates, which are potent KSP inhibitors, with half-sandwich complexes of ruthenium, osmium, rhodium, and iridium. Conjugation of 7-chloroquinazolin-4(3H)-one with the pyridine-2-ylmethylimine group and the organometallic moiety resulted in up to a 36-fold increased cytotoxicity with IC 50 values in the micromolar and nanomolar range also toward drug-resistant cells. All studied conjugates increased the percentage of cells in the G 2 /M phase, simultaneously decreasing the number of cells in the G 1 /G 0 phase, suggesting mitotic arrest. Additionally, ruthenium derivatives were able to generate reactive oxygen species (ROS); however, no significant influence of the organometallic moiety on KSP inhibition was observed, which suggests that conjugation of a KSP inhibitor with the organometallic moiety modulates its mechanism of action.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗