SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Protective Polymer Coatings (PPCs) protect lithium metal anodes in rechargeable batteries to stabilize the Li/electrolyte interface and to extend the cycle life by reducing parasitic reactions and improving the lithium deposition morphology.
Interfacial instability between lithium metal and solid-state electrolytes limits the performance of all-solid-state lithium metal batteries (ASSLBs), leading to parasitic reactions, non-uniform Li+ flux, and dendrite growth. Here, we develop a composite interlayer composed of the anti-perovskite Li2OHCl0.75Br0.25 (AP) and carbon nanotubes (CNTs) to enhance both interfacial stability and ionic transport. The AP–CNT interlayer exhibits enhanced Li+ conductivity arising from interfacial electron transfer from AP to CNTs, which generates a built-in electric field that facilitates Li+ migration. Lithium symmetric cells incorporating this interlayer achieve a high critical current density of 2.4 mA cm−2 at 55 °C. This design integrates chemical robustness with coupled ion–electron transport, offering a generalizable strategy for safe, dendrite-free, and high-performance ASSLBs.
Rechargeable Zn metal batteries (RZMBs) may provide a more sustainable and lower-cost alternative to established battery technologies in meeting energy storage applications of the future. However, the most promising electrolytes for RZMBs are generally aqueous and require high concentrations of salt(s) to bring efficiencies toward commercially viable levels and mitigate water-originated parasitic reactions including hydrogen evolution and corrosion. Electrolytes based on nonaqueous solvents are promising for avoiding these issues, although full cell performance demonstrations with solvents other than water have been very limited. To address these challenges, we investigated MeOH as an alternative electrolyte solvent. These MeOH-based electrolytes exhibited exceptional Zn reversibility over a wide temperature range, with a Coulombic efficiency > 99.5% at 50% Zn utilization without cell short-circuit behavior for > 1,800 h. More important, this remarkable performance translates well to Zn || metal-free organic cathode full cells, supporting < 6% capacity decay after > 800 cycles at –40°C.
Nanosized silicon materials are being developed for use in the anodes of high-energy lithium-ion batteries. However, the high surface areas of these materials increase the rate of parasitic reactions in the electrode, which consume cyclable Li + and degrade battery performance. Prelithiation offers a realistic strategy to compensate for this reactivity, by injecting additional charge into the cell to counterbalance the Li + loss. Interestingly, the benefits offered by prelithiation extend beyond its more obvious purpose. Here, by using a reference electrode in NMC532//Si–Gr cells, we show how prelithiation alters the cycling potentials experienced by the Si-containing anode and how that translates into gains in cycle life. The rate of consumption of the prelithiated charge is lower than that expected from the behavior of non-prelithiated cells. Curiously, the Si particles become partially unresponsive during the C/3 cycling apparently because of kinetic constraints. Electrochemical studies on harvested electrodes in half-cells show that capacities are intact after the long-term cycling and that most of the lithium reservoir is still present in the anode. We conclude that the high capacity retention displayed by the prelithiated cells mainly results from a higher participation of graphite particles during the extended electrochemical cycling.
Nickel-rich single-crystal (SC) layered oxides are promising cathode candidates for next-generation lithium-ion batteries (LIBs) owing to their high energy density and structural robustness against intergranular cracking. However, their intrinsic surface reactivity with liquid electrolytes accelerates parasitic reactions at the cathode–electrolyte interphase (CEI), leading to transition-metal dissolution, gas generation, and impedance buildup. In this work, we synthesized SC-Li x Ni 0.9 Mn 0.05 Co 0.05 O 2 (NMC9055, 1 ≤ x ≤ 1.2) using a eutectic-assisted method and investigated interface stabilization strategies. A nickel-deficient Li x Ni 0.6 Mn 0.2 Co 0.2 O 2 (NMC622, 1 ≤ x ≤ 1.2) coating was applied via evaporation-based deposition to suppress CEI degradation pathways. Structural and compositional analyses confirmed uniform shell formation and preserved particle integrity. Half-cell electrochemical testing against lithium metal revealed ∼10% higher capacity retention and improved reversibility compared with pristine SC NMC9055, particularly under high-voltage operation. In conclusion, these results highlight the critical role of controlled surface chemistry in mitigating CEI instability in nickel-rich SC cathodes, offering a pathway toward enabling durable high-energy LIBs.
Membrane capacitive deionization (MCDI) is a unique electrochemical separations platform that allows for energy recovery during electrode regeneration. Similar to other electrochemical separation technologies producing deionized water (e.g. electrodialysis), ohmic resistances in the spacer channel significantly hampers the performance and energy efficiency of the process. This work devised a series of ionomer coated nylon mesh nets to address spacer channel resistances in MCDI. Under constant current operation, the ionomer coated nylon meshes displayed a 300 mV lower cell voltage rise during deionization while sustaining the same deionization rate. Furthermore, energy recovery was improved by 1.4x to 5.5x depending on the saline feed concentration. The lower cell voltage rise during deionization combined with the greater energy recovery with ionomer coated meshes resulted in energy normalized adsorbed salt (ENAS) values that were 2x to 3x greater. Addressing the spacer channel resistances in MCDI allowed for 8% to 19% increase in current density without the cell voltage exceeding 1.6 V—the upper bound set for mitigating parasitic reactions. Operating at higher current density leads to smaller MCDI units for a given deionization requirement and has implications for reducing the capital costs of the MCDI unit.
Improved performance of lithium-ion batteries (LIBs) plays a critical role in the future of next- generation battery applications. Nickel-rich layered oxides such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC 811), are popular cathodes due to their high energy densities. However, they suffer from high surface reactivity, which results in the formation of Li 2 CO 3 passive layer. Herein, we show the role of nanosecond pulsed laser annealing (PLA) in improving the current capacity and cycling stability of LIBs by reducing the carbonate layer, in addition to forming a protective LiF layer and manipulating the NMC 811 microstructures. We use high-power nanosecond laser pulses in a controlled way to create nanostructured surface topography which has a positive impact on the capacity retention and current capacity by providing an increased active surface area, which influences the diffusion kinetics of lithium-ions in the electrode materials during the battery cycling process. Advanced characterizations show that the PLA treatment results in the thinning of the passive Li 2 CO 3 layer, which is formed on as-received NMC811 samples, along with the decomposition of excess polyvinylidene fluoride (PVDF) binder. The high-power laser interacts with the decomposed binder and surface Li + to form LiF phase, which acts as a protective layer to prevent surface reactive sites from initiating parasitic reactions. As a result, the laser treated cathodes show relative increase of the current capacity of up to 50%, which is consistent with electrochemical measurements of LiB cells.
High-Nickel layered oxides are being pursued for their high specific capacities. With increasing nickel content, the layered oxides also suffer from structural and morphological instabilities, which degrade the electrochemical performance. Single-crystalline morphology presents an attractive solution to these problems, simultaneously reducing surface area available for parasitic reactions and preventing electrolyte penetration into the bulk with the removal of grain boundaries. Single-crystal cathodes have already shown promising results with NMC composition cathodes, but there are still gaps in the fundamental understanding of how single-crystalline morphology alters electrochemical behavior. We attempt to fill some of these gaps by studying in detail the electrochemical operation of polycrystalline and single-crystalline LiNiO 2 (LNO). Single-crystal LNO is prepared through a molten salt method yielding high-quality, distinct crystals with comparable lattice chemistry to polycrystalline LNO. The single-crystal LNO achieves far greater stability during long-term cycling, reaching 500 cycles with 82.5% capacity retention. Interestingly, the single-crystalline LNO also displays superior rate performance, delivering 157 mA h g −1 at 10C discharge rate. Investigation of the phase evolution behavior during cycling strongly suggests that the absence of grain boundaries in single-crystalline LNO is responsible for the superior performance.
Silicon nanoparticles have emerged as a promising alternative to graphite to improve the energy density of next-generation lithium-ion battery anodes. Nano-sized Si domains facilitate rapid ion transport and minimize particle-scale mechanical degradation, but also exhibit increased (electro)chemical reactivity with Li-ion electrolyte components due to their high surface area. We have previously demonstrated that surface modification of Si nanoparticles with pitch-carbon is an effective strategy to reduce these parasitic reactions. In the present work, we holistically evaluate the mechanistic contribution of pitch-carbon coating to the observed stability improvement over uncoated Si. We utilize coupled in situ and ex situ methods to probe changes to solid-surface, volatile headspace, and gas-phase chemistry occurring during initial cycling. Measurements taken at targeted potentials associated with electrolyte species reduction enables the decoupling of specific reaction pathways tied to interfacial stability. Further, we demonstrate the non-trivial role of gas reconsumption in dictating the nature of the passivating surface layer evolved on both uncoated and pitch-coated Si. This multi-phase analysis offers insights into the mechanism of effective surface passivation, which may be applied to inform future Si material development.
The integration of solid-polymer electrolytes into all-solid-state lithium batteries is highly desirable to overcome the limitations of current battery configurations that have a low energy density and severe safety concerns. Polyacrylonitrile is an appealing matrix for solid-polymer electrolytes; however, the practical utilization of such polymer electrolytes in all-solid-state cells is impeded by inferior ionic conductivity and instability against a lithium-metal anode. In this work, we show that a polymer-in-salt electrolyte based on polyacrylonitrile with a lithium salt as the major component exhibits a wide electrochemically stable window, a high ionic conductivity, and an increased lithium-ion transference number. The growth of dendrites from the lithium-metal anode was suppressed effectively by the polymer-in-salt electrolyte to increase the safety features of the batteries. In addition, we found that a stable interphase was formed between the lithium-metal anode and the polymer-in-salt electrolyte to restrain the uncontrolled parasitic reactions, and we demonstrated an all-solid-state battery configuration with a LiFePO 4 cathode and the polymer-in-salt electrolyte, which exhibited a superior cycling stability and rate capability.
In the search for efficient energy storage battery technologies, designing stable electrolytes has been a long-standing challenge. Electrolytes based on molten salt eutectics are known for their stability with minimum parasitic reactions when compared to their widely used organic counterparts. However, the operating temperatures of these molten salt electrolyte-based batteries are dictated by the melting point of the eutectic mixtures. Design and high throughput screening of low melting temperature eutectic molten salt mixtures have been hindered by the lack of computational models. In this work, we develop thermodynamic models to predict the eutectic points of several molten salt mixtures. The framework of the COSMO-SAC model is used for the predictions and is compared with experimental data and other thermodynamic approaches. Rapid thermodynamics-based approaches, as shown in this study, can accelerate the discovery of new materials, complementing experimental techniques.
Battery electrodes are typically prepared using a slurry-based method, where high boiling point organic solvents are typically used with a polymer binder to disperse active electrode materials and conductive carbon additives followed by casting into current collector sheets. In this process, the use of organic solvents are environmentally hazardous, energy intensive, and time-consuming, while polymeric binders add weight and can undergo parasitic reactions during battery cycling. Here we discuss the use of a unique conductive carbon nanomaterial, namely holey graphene, as a multifunctional host that can be processed via a facile, solvent-free, binder-free, cold pressing method to prepare electrodes with unique architectures. This approach can accommodate a broad range of battery chemistries, such as lithium oxygen/carbon dioxide (Li-O2/CO2), lithium sulfur/selenium (Li-S/Se), and various lithium ion chemistries. The successful use of dry, cold compression allows the convenient modification of electrode mass loading with unique architectures containing active materials randomly mixed or layered with single or multiple layers of one or more active materials. In the conventional slurry-based electrode fabrication method, it is difficult, if not impossible, to achieve such layered architectures. In particular, the layered electrode architectures from the dry, cold press approach are easy to fabricate without significantly sacrificing device performance, and are amenable to continuous roll-to-roll dry processing. In addition, these architectures offer unprecedented perspectives on the battery material loading vs. utilization efficiency, as well as enabling unique characterization opportunities to advance mechanistic understanding of various battery chemistries. Potential applications of this unique electrode fabrication approach for solid-state batteries will also be discussed.
Designing stable electrolytes with target properties is an important challenge in realizing next generation energy storage devices. Molten salt eutectics-based electrolytes are known for their stability with minimal parasitic reactions when compared to traditional organic electrolytes and are an attractive option for different battery chemistries. The operating temperature of the molten salt batteries depends on the melting temperature of the eutectic and hence there is a necessity to discover novel low melting temperature molten salt eutectic mixtures for energy storage applications. In this work we develop a high throughput computational screening approach for molten salt mixtures using thermodynamic modeling and machine learning (ML). COSMO-SAC model and ML approaches were independently developed based on the existing experimental data and these models were further used to predict the eutectic melting temperature and composition of several new binary, ternary, and quaternary mixtures. We show that combining ML and thermodynamic modeling strategies is effective in exploring the vast design space of molten salt mixtures.
Designing stable electrolytes with target properties is an important challenge in realizing next generation energy storage devices. Molten salt eutectics-based electrolytes are known for their stability with minimal parasitic reactions when compared to traditional organic electrolytes and are an attractive option for different battery chemistries. The operating temperature of the molten salt batteries depends on the melting temperature of the eutectic and hence there is a necessity to discover novel low melting temperature molten salt eutectic mixtures for energy storage applications. In this work we develop a high throughput computational screening approach for molten salt mixtures using thermodynamic modeling and machine learning (ML). COSMO-SAC model and ML approaches were independently developed based on the existing experimental data and these models were further used to predict the eutectic melting temperature and composition of several new binary, ternary, and quaternary mixtures. We show that combining ML and thermodynamic modeling strategies is effective in exploring the vast design space of molten salt mixtures.
The drastic environmental and economic costs of global warming have driven the necessity to reduce, if not eliminate, a dependency on oil and gas for energy applications. Alternative clean energy reliance has been initiated as a global investment for a more sustainable future. Part of this transitional effort is focused on energy storage via a rechargeable battery. High energy density storage is necessary for utilizing non-dispatchable green energy technologies, as well in the electric transition of our vehicle fleet. Further, understanding methods of extracting, manufacturing, and recycling lithium is necessary to lessen environmental impact. Lithium metal is often considered the “Holy Grail” of battery technology, due to its high theoretical capacity (3,860 mAh/g) and low electrochemical potential (-3.04 V vs. SHE). However, parasitic reactions lead to rapid and dangerous battery failure. Therefore, determining methods of stabilizing lithium metal is paramount for the transition to a greener future.
Silicon-based anodes for Li-ion batteries (LIB) have the potential to increase the energy density over graphite-based LIB anodes. However, silicon anodes exhibit poor cycle and calendar lifetimes due to mechanical instabilities and high chemical reactivity with the carbonate-based electrolytes that are typically used in LIBs. In this work, we synthesize a pitch-carbon coated silicon nanoparticle composite active material for LIB anodes that exhibits reduced chemical reactivity with the carbonate electrolyte compared to an uncoated silicon anode. Silicon primary particle sizes <10 nm minimize micro-scale mechanical degradation of the anode composite, while conformal coatings of pitch-carbon minimized the parasitic reactions between the silicon and the electrolyte. When matched with a high voltage NMC622 cathode, the pitch-carbon coated Si anode retains -75% of its initial capacity over 1000 cycles. Efforts to increase the areal loading of the pitch-carbon coated silicon anodes to realize real energy density improvements over graphite anodes results in severe mechanical degradation on the electrode level. Developing procedures to engineer the architecture of the composite silicon anode may be a solution to this mechanical challenge.
An interfacial understanding is necessary for developing strategies to commercialize high-energy density rechargeable lithium metal anode batteries, as currently, the lithium anode/electrolyte interface is unstable with prolonged cycling. We have used several strategies to improve the cycling performance of lithium metal anodes, including reducing the parasitic reactions between lithium metal and the electrolyte, and improving the electrodeposited lithium metal morphology. These strategies have generated unconclusive electrochemical data, that has required the need for nanoscale interfacial characterization of these solid-liquid interfaces. Our team has used the cryogenic transfer workflow developed by Leica in collaboration with cryo-SEM/FIB tools by Thermo Fisher Scientific to cross-section lithium metal anodes and intact coin cell batteries to observe the interfacial structures, lithium morphology, and failure mechanisms relative to changes in electrode contract pressure and electrolyte chemistry. Cross-sectional SEM images and EDS maps of the lithium metal anodes have provided a better understanding of the electrodeposited lithium morphology, quantity of 'dead' lithium metal, and quantity of solid electrolyte interphase material that has formed alongside the lithium metal. In understanding lithium metal battery failure at the system level, we used a cryogenic stage in a laser plasma FIB to cross-section through the coin cell's cap for imaging/mapping the entire battery stack under cryogenic conditions. The tools, methods, and results of these studies will be detailed in this presentation.
Aqueous zinc-ion batteries (AZIBs) offer a combination of safety and low cost, but they suffer from dynamic pH fluctuations that drive parasitic reactions and capacity fading. In this review, we report the current mechanistic understanding of the dynamic pH evolution across the electrolyte-electrode interface and its role in triggering interphase instability. We summarize advanced strategies to regulate pH, including electrolyte engineering, electrode surface modification, and interphase construction. We further discuss current methods for probing pH dynamics and outline potential future approaches for gaining deeper mechanistic and design insights.