Search NASA⌕ Search

SEARCH · Search NASA

Results for “parts program requirements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

TPSAS-NF1676L-30470-DND

Outside NASA: Single Agency document that can be referenced in NASA contracts (e.g. CCP) and used in NASA-ESA-JAXA Mutual Recognition of SMA Standards Within NASA: - Lists requirements from Center documents that must be addressed by Programs and Projects in their EEE Parts Management and Control Plan (EPMCP) - Tailor-able by Center/Project Technical Authority - Standardize requirements for “Low Risk” projects -not to overburden “Higher Risk” projects with excessive requirements

Peter J Majewicz↗
NASA NTRS1996

Program Calculates Current Densities Of Electronic Designs

PDENSITY computer program calculates current densities for use in calculating power densities of electronic designs. Reads parts-list file for given design, file containing current required for each part, and file containing size of each part. For each part in design, program calculates current density in units of milliamperes per square inch. Written by use of AWK utility for Sun4-series computers running SunOS 4.x and IBM PC-series and compatible computers running MS-DOS. Sun version of program (NPO-19588). PC version of program (NPO-19171).

Cox, Brian↗
NASA NTRS1972

The ATS F&G systems reliability program.

Assurance of reliability, quality, and proper testing requires a large coordinating effort and a means for connecting the various areas involved. All parts used on the spacecraft are required to meet strict specifications and consequently must be approved by the systems reliability manager. The parts program has access to a computer data bank into which all information concerning nonstandard parts approval requests has been stored. Through the data bank, the system collects and distributes timely information concerning quality and reliability to all departments that may be concerned.

Doyle, H.↗
NASA NTRS1976

Payload specialist station study: Volume 2, part 3: Program analysis and planning for phase C/D

The controls and displays (C&D) required at the Orbiter aft-flight deck (AFD) and the core C&D required at the Payload Specialist Station (PSS) are identified in this document. The AFD C&D Concept consists of a multifunction display system (MFDS) and elements of multiuse mission support equipment (MMSE). The MFDS consists of two CRTs, a display electronics unit (DEU), and a keyboard. The MMSE consists of a manual pointing controller (MPC), five digit numeric displays, 10 character alphanumeric legends, event timers, analog meters, rotary and toggle switches. The MMSE may be hardwired to the experiment, or interface with a data bus at the PSS for signal processing. The MFDS has video capability, with alphanumeric and graphic overlay features, on one CRT and alphanumeric and graphic (tricolor) capability on a second CRT. The DEU will have the capability to communicate, via redundant data buses, with both the spacelab experiment and subsystem computers.

Source record↗
NASA NTRS1989

A distributed program composition system

A graphical technique for creating distributed computer programs is investigated and a prototype implementation is described which serves as a testbed for the concepts. The type of programs under examination is restricted to those comprising relatively heavyweight parts that intercommunicate by passing messages of typed objects. Such programs are often presented visually as a directed graph with computer program parts as the nodes and communication channels as the edges. This class of programs, called parts-based programs, is not well supported by existing computer systems; much manual work is required to describe the program to the system, establish the communication paths, accommodate the heterogeneity of data types, and to locate the parts of the program on the various systems involved. The work described solves most of these problems by providing an interface for describing parts-based programs in this class in a way that closely models the way programmers think about them: using sketches of diagraphs. Program parts, the computational modes of the larger program system are categorized in libraries and are accessed with browsers. The process of programming has the programmer draw the program graph interactively. Heterogeneity is automatically accommodated by the insertion of type translators where necessary between the parts. Many decisions are necessary in the creation of a comprehensive tool for interactive creation of programs in this class. Possibilities are explored and the issues behind such decisions are presented. An approach to program composition is described, not a carefully implemented programming environment. However, a prototype implementation is described that can demonstrate the ideas presented.

Brown, Robert L.↗
NASA NTRS1994

Space Station Freedom secondary power wiring requirements

Secondary power is produced by DDCU's (direct current to direct current converter units) and routed to and through secondary power distribution assemblies (SPDA's) to loads or tertiary distribution assemblies. This presentation outlines requirements of Space Station Freedom (SSF) EEE (electrical, electronic, and electromechanical) parts wire and the approved electrical wire and cable. The SSF PDRD (Program Definition and Requirements Document) language problems and resolution are reviewed. The cable routing to and from the SPDA's is presented as diagrams and the wire recommendations and characteristics are given.

Sawyer, C. R.↗
NASA NTRS1975

Apollo experience report: Electrical wiring subsystem

The general requirements of the electrical wiring subsystems and the problem areas and solutions that occurred during the major part of the Apollo Program are detailed in this report. The concepts and definitions of specific requirements for electrical wiring; wire-connecting devices; and wire-harness fabrication, checkout, and installation techniques are discussed. The design and development of electrical wiring and wire-connecting devices are described. Mission performance is discussed, and conclusions and recommendations for future programs are presented.

White, L. D.↗
NASA NTRS1977

Meteorological support for remote sensing programs

Many earth-oriented remote sensing spacecraft and aircraft programs are affected by the presence of clouds. Like aerial photography, they require clear or mostly clear skies. To cope with the cloud problem, the National Weather Service through its Spaceflight Meteorology Group (SMG) of the Space Operations Support Division makes cloud cover forecasts, as part of its specialized weather service for various NASA remote sensing and other programs. Forecasting requirements vary in time from a few hours out to several days and in aerial extent from a particular locality to nearly global in coverage. Depending on the stage of program development, some remote sensing programs may involve special climatological studies for planning purposes or need ground-truth data for comparison with remotely sensed information. The importance of computer and weather satellite products to the SMG meteorologist is discussed and the nature of SMG's weather support of past, present, and future remote sensing programs is described.

Cox, J. L.↗
NASA NTRS1994

Design and construction of a remote piloted flying wing

Currently, there is a need for a high-speed, high-lift civilian transport. Although unconventional, a flying wing could fly at speeds in excess of Mach 2 and still retain the capacity of a 747. The design of the flying wing is inherently unstable since it lacks a fuselage and a horizontal tail. The project goal was to design, construct, fly, and test a remote-piloted scale model flying wing. The project was completed as part of the NASA/USRA Advanced Aeronautics Design Program. These unique restrictions required us to implement several fundamental design changes from last year's Elang configuration including wing sweepback and wingtip endplates. Unique features such as a single ducted fan engine, composite structural materials, and an electrostatic stability system were incorporated. The result is the Banshee '94. Our efforts will aid future projects in design and construction techniques so that a viable flying wing can become an integral part of the aviation industry.

Costa, Alfred J.↗
NASA NTRS2020

Missed Thrust Requirements for Psyche Mission

The Psyche Mission, part of NASA’s Discovery Mission Program, will explore the metal asteroid (16) Psyche which orbits the sun at ~3 AU. The spacecraft uses solar electric propulsion (SEP) as its primary propulsion system during the ~3.5 year trajectory to (16) Psyche and 21 month orbital operations period around the asteroid. As the first NASA mission to use Hall thrusters for deep space exploration, unique challenges have been identified and resolved in how we plan to accommodate unplanned coast (missed thrust time) during the trajectory and orbital operations and still meet the mission objectives. This paper describes the projects missed thrust requirements in detail, along with the accompanying rationale and analysis plan for the Psyche mission.

Snyder, John Steven↗
NASA NTRS1977

Space station analysis study. Part 2, Volume 1: Executive summary

Objectives of the space station program requiring the support of man in space, either in the shuttle sortie mode or in extended duration facilities are identified and analyzed. A set of functional requirements was derived to identify specific technology advancement needs, tests to be conducted, and processes to be developed. Program options are summarized for: (1) satellite power system; (2) earth services; (3) space cosmological research and development; (4) space processing and manufacturing; (5) multidiscipline science laboratory; (6) sensor development facility; (7) living and working in space; and (8) orbital depot.

Source record↗
NASA NTRS1978

Design and operating experience on the U.S. Department of Energy Experimental Mod-O 100 kW Wind Turbine

The Mod-O 100 kW Experimental Wind Turbine was designed and fabricated by NASA, as part of the Federal Wind Energy Program, to assess technology requirements and engineering problems of large wind turbines. The machine became operational in October 1975 and has demonstrated successful operation in all of its design modes. During the course of its operations the machine has generated a wealth of experimental data and has served as a prototype developmental test bed for the Mod-OA operational wind turbines which are currently used on utility networks. This paper describes the mechanical and control systems as they evolved in operational tests and describes some of the experience with various systems in the downwind rotor configuration.

Glasgow, J. C.↗
NASA NTRS1985

Space missions for automation and robotics technologies (SMART) program

The motivations, features and expected benefits and applications of the NASA SMART program are summarized. SMART is intended to push the state of the art in automation and robotics, a goal that Public Law 98-371 mandated be an inherent part of the Space Station program. The effort would first require tests of sensors, manipulators, computers and other subsystems as seeds for the evolution of flight-qualified subsystems. Consideration is currently being given to robotics systems as add-ons to the RMS, MMU and OMV and a self-contained automation and robotics module which would be tended by astronaut visits. Probable experimentation and development paths that would be pursued with the equipment are discussed, along with the management structure and procedures for the program. The first hardware flight is projected for 1989.

Ciffone, D. L.↗
NASA NTRS1988

Measurement and prediction of propeller flow field on the PTA aircraft at speeds of up to Mach 0.85

High speed subsonic transports powered by advanced propellers provide significant fuel savings compared to turbofan powered transports. Unfortunately, however, propfans must operate in aircraft-induced nonuniform flow fields which can lead to high blade cyclic stresses, vibration and noise. To optimize the design and installation of these advanced propellers, therefore, detailed knowledge of the complex flow field is required. As part of the NASA Propfan Test Assessment (PTA) program, a 1/9 scale semispan model of the Gulfstream II propfan test-bed aircraft was tested in the NASA-Lewis 8 x 6 supersonic wind tunnel to obtain propeller flow field data. Detailed radial and azimuthal surveys were made to obtain the total pressure in the flow and the three components of velocity. Data was acquired for Mach numbers ranging from 0.6 to 0.85. Analytical predictions were also made using a subsonic panel method, QUADPAN. Comparison of wind-tunnel measurements and analytical predictions show good agreement throughout the Mach range.

Aljabri, Abdullah S.↗
NASA NTRS1993

A Generalized-Compliant-Motion Primitive

Computer program bridges gap between planning and execution of compliant robotic motions developed and installed in control system of telerobot. Called "generalized-compliant-motion primitive," one of several task-execution-primitive computer programs, which receives commands from higher-level task-planning programs and executes commands by generating required trajectories and applying appropriate control laws. Program comprises four parts corresponding to nominal motion, compliant motion, ending motion, and monitoring. Written in C language.

Backes, Paul G.↗
NASA NTRS1995

Program Estimates Areas Required By Electronic Designs

PSIZE computer program calculates space required for electronic design. Reads in parts-list file and file containing required area for each type of part. Both unit areas of components and inherent additional space requirements taken into account. Written by use of AWK utility for Sun4-series computers running SunOS 4.x and IBM PC-series and compatible computers running MS-DOS. Sun version (NPO-19589). PC version (NPO-19065).

Cox, Brian↗