Search NASA⌕ Search

SEARCH · Search NASA

Results for “performance loss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The detection and measurement of microburst wind shear by an airborne lidar system

The NASA Lockheed Missiles and Space Company (LMSC) Coherent Lidar Airborne Shear Sensor (CLASS) employs coherent lidar technology as a basis for a forward-looking predictive wind shear detection system. Line of sight wind velocities measured ahead of the aircraft are combined with aircraft state parameters to relate the measured wind change (or shear) ahead of an aircraft to its performance loss or gain. In this way the system can predict whether a shear detected ahead of the aircraft poses a significant threat to the aircraft and provide an advance warning to the flight crew. Installed aboard NASA's Boeing 737 research aircraft, the CLASS system is flown through convective microburst wind shears in Denver, Co., and Orlando, Fl. Some preliminary flight test results are presented. It is seen that the system was able to detect and measure wind shears ahead of the aircraft in the relatively dry Denver environment, but its performance was degraded in the high humidity and heavy rain in Orlando.

Robinson, Paul A.↗
NASA NTRS2020

Improved State Estimation in Distorted Magnetic Fields

The magnetic field of the Earth – besides varying naturally – may be disturbed locally by the (man-made) environment. State estimation and corresponding navigation frameworks that use magnetometers on-board of mobile platforms suffer from severe performance loss or failure upon local magnetic distortions if these are not detected and mitigated adequately. Advanced estimators include the magnetic variation in the state vector. However, Cartesian coordinates, although widely used in the literature, suffer from observability issues when it comes to disturbance detection. This paper shows the importance of representing the magnetic variation in a spherical coordinate system and subsequent improvements with respect to the common representation in Cartesian coordinates. The spherical representation improves estimator consistency and allows for accurate and fast mitigation of magnetic disturbances through consistent statistical tests which leads to better system state estimates in magnetically distorted areas. The approach is validated by performing tests with simulated and real-world data on embedded hardware.

Brommer, Christian↗
NASA NTRS1992

Wind Tunnel Aerodynamic Characteristics of a Transport-type Airfoil in a Simulated Heavy Rain Environment

The effects of simulated heavy rain on the aerodynamic characteristics of an NACA 64-210 airfoil section equipped with leading-and trailing-edge high-lift devices were investigated in the Langley 14- by 22-Foot Subsonic Tunnel. The model had a chord of 2.5 ft, a span of 8 ft, and was mounted on the tunnel centerline between two large endplates. Aerodynamic measurements in and out of the simulated rain environment were obtained for dynamic pressures of 30 and 50 psf and an angle-of-attack range of 0 to 20 degrees for the cruise configuration. The rain intensity was varied to produce liquid water contents ranging from 16 to 46 gm/cu m. The results obtained for various rain intensity levels and tunnel speeds showed significant losses in maximum lift capability and increases in drag for a given lift as the liquid water content was increased. The results obtained on the landing configuration also indicate a progressive decrease in the angle of attack at which maximum lift occurred and an increase in the slope of the pitching-moment curve as the liquid water content was increased. The sensitivity of test results to the effects of the water surface tension was also investigated. A chemical was introduced into the rain environment that reduced the surface tension of water by a factor of 2. The reduction in the surface tension of water did not significantly alter the level of performance losses for the landing configuration.

Bezos, Gaudy M.↗
NASA NTRS1963

A VARIATIONAL LAUNCH WINDOW STUDY

Obtention of a launch window, as a function of allowable performance loss, for placing a saturn v in a circular orbit in a prespecified space-fixed plane

ORBITAL MECHANICS↗
NASA NTRS1971

Transpiration and film cooling boundary layer computer program. Volume 1: Numerical solutions of the turbulent boundary layer equations with equilibrium chemistry

A finite difference turbulent boundary layer computer program has been developed. The program is primarily oriented towards the calculation of boundary layer performance losses in rocket engines; however, the solution is general, and has much broader applicability. The effects of transpiration and film cooling as well as the effect of equilibrium chemical reactions (currently restricted to the H2-O2 system) can be calculated. The turbulent transport terms are evaluated using the phenomenological mixing length - eddy viscosity concept. The equations of motion are solved using the Crank-Nicolson implicit finite difference technique. The analysis and computer program have been checked out by solving a series of both laminar and turbulent test cases and comparing the results to data or other solutions. These comparisons have shown that the program is capable of producing very satisfactory results for a wide range of flows. Further refinements to the analysis and program, especially as applied to film cooling solutions, would be aided by the acquisition of a firm data base.

Levine, J. N.↗
NASA NTRS1972

Liquid rocket performance computer model with distributed energy release

Development of a computer program for analyzing the effects of bipropellant spray combustion processes on liquid rocket performance is described and discussed. The distributed energy release (DER) computer program was designed to become part of the JANNAF liquid rocket performance evaluation methodology and to account for performance losses associated with the propellant combustion processes, e.g., incomplete spray gasification, imperfect mixing between sprays and their reacting vapors, residual mixture ratio striations in the flow, and two-phase flow effects. The DER computer program begins by initializing the combustion field at the injection end of a conventional liquid rocket engine, based on injector and chamber design detail, and on propellant and combustion gas properties. It analyzes bipropellant combustion, proceeding stepwise down the chamber from those initial conditions through the nozzle throat.

Combs, L. P.↗
NASA NTRS1972

Space Storable Propellant Performance Gas/Liquid Like-Doublet Injector Characterization

A 30-month applied research program was conducted, encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space-storable propellants. The gas/liquid propellant combination selected for study was FLOX (82.6% F2)/ambient temperature gaseous methane. The injector pattern characterized was the like-(self)-impinging doublet. Program effort was apportioned into four basic technical tasks: injector and thrust chamber design, injector and thrust chamber fabrication, performance evaluation testing, and data evaluation and reporting. Analytical parametric combustion analyses and cold flow distribution and atomization experiments were conducted with injector segment models to support design of injector/thrust chamber combinations for hot fire evaluation. Hot fire tests were conducted to: (1) optimize performance of the injector core elements, and (2) provide design criteria for the outer zone elements so that injector/thrust chamber compatibility could be achieved with only minimal performance losses.

Falk, A. Y.↗
NASA NTRS1973

Optimum inclination for shuttle retrieval of inclination non-sensitive satellites

A study to identify the optimum inclination for a satellite when the satellite is inclination non-sensitive and is to be retrieved is reported. This inclination is such that it provides an opportunity for a retrieval flight at least once each day with minimal on-orbit phasing requirements and minimal ascent performance losses.

Blackwell, D. L.↗
NASA NTRS1973

An experimental investigation of two-phase liquid oxygen pumping

The results of an experimental program to explore the feasibility of pumping two-phase oxygen (liquid and gas) at the pump inlet are reported. Twenty-one cavitation tests were run on a standard J-2 oxygen pump at the MSFC Components Test Laboratory. All tests were run with liquid oxygen 5 to 10 K above the normal boiling point temperature. During ten tests run at approximately at the pump inlet were noted before complete pump performance 50 percent of the nominal operating speed, two phase conditions were achieved. Vapor volumes of 40 to 50 percent at the pump inlet were noted before complete pump performance loss. The experimental results compared to predictions. Nine cavitation tests run at the nominal pump speed over a 5 K temperature range showed progressively lower net positive suction head (NPSH) requirements as temperature was increased. Two-phase operation was not achieved. The temperature varying NPSH data were used to calculate thermodynamic effects on NPSH, and the results were compared to existing data.

Gross, L. A.↗
NASA NTRS1973

Solution of coupled and singular perturbation methods using duality theory.

Dual variational techniques developed by Chan and Leininger (1972) are summarized, and duality theory in the form of the Complementary Variational Principle is employed to provide a suboptimal measure for the singular and epsilon-coupled perturbation methods proposed by Kokotovic and Cruz. The suboptimal measure is independent of any a priori knowledge of the optimal solution, thereby providing an absolute estimate of the performance loss rather than an estimate relative to the unknown optimal solution.

Chan, W. L.↗
NASA NTRS1973

Design, capability, and cost of a Versatile Upper Stage /VUS/ family of vehicles.

Trade-off studies and a preliminary design were accomplished to investigate the Versatile Upper Stage (VUS) concept. This concept entails the development by one contractor of a family of stages with a great deal of commonality to perform a spectrum of potential unmanned automated missions planned through 1990. The trade studies and analyses revealed areas where the penalty for commonality between stages was excessive in weight and performance loss. This occurred in the selection of the vehicle structural shell. In many of the expensive subsystems, especially astrionics, it was found that establishing the requirements for all family members and the application of commonality in subsystem selection could result in significant savings.

Haltermann, R. L.↗
NASA NTRS1973

Program on ground test of modified quiet, clean, JT3D and JT8D turbofan engines in their respective nacelles

A program to reduce the community noise levels of commercial jet aircraft is summarized. The program objective is the development of three acoustically treated nacelle configurations for the 707, 727, and 737 series aircraft to provide maximum noise reduction with minimum performance loss, modification requirements, and economic impact. The preliminary design, model testing, data analyses, and economic studies of proposed nacelle configurations are discussed.

Source record↗
NASA NTRS1973

A procedure for calculation of boundary layer trip protuberances in overexpanded rocket nozzles

A procedure is described for sizing, scaling, positioning and performance loss calculation of a boundary layer trip protuberance. The theoretical results are compared with some experimental data. The application of boundary layer trips, such as secondary injection, wall angle discontinuities, circumferential grooves, and circumferential trip protuberances for reducing side loads on rocket nozzle walls is discussed.

Schmucker, R. H.↗
NASA NTRS1972

Acoustic attenuation design requirements established through EPNL parametric trades

An optimization procedure for the provision of an acoustic lining configuration that is balanced with respect to engine performance losses and lining attenuation characteristics was established using a method which determined acoustic attenuation design requirements through parametric trade studies using the subjective noise unit of effective perceived noise level (EPNL).

Veldman, H. F.↗
NASA NTRS1974

Status of flow separation prediction in liquid propellant rocket nozzles

Flow separation which plays an important role in the design of a rocket engine nozzle is discussed. For a given ambient pressure, the condition of no flow separation limits the area ratio and, therefore, the vacuum performance. Avoidance of performance loss due to area ratio limitation requires a correct prediction of the flow separation conditions. To provide a better understanding of the flow separation process, the principal behavior of flow separation in a supersonic overexpanded rocket nozzle is described. The hot firing separation tests from various sources are summarized, and the applicability and accuracy of the measurements are described. A comparison of the different data points allows an evaluation of the parameters that affect flow separation. The pertinent flow separation predicting methods, which are divided into theoretical and empirical correlations, are summarized and the numerical results are compared with the experimental points.

Schmucker, R. H.↗
NASA NTRS1975

Attitude control requirements for an earth-orbital solar electric propulsion stage

Solar Electric Propulsion Stage (SEPS) application in earth orbit requires considerably more maneuvering for thrust vector steering and solar array pointing than planetary missions. Attitude maneuver requirements for geosynchronous and low earth-orbital missions are presented. Situations which result in optimum steering torque requirements exceeding the capability of current SEPS configurations are defined. Sub-optimal steering techniques are defined which reduce the geosynchronous mission torque requirements to acceptable levels with negligible performance penalties. Some low earth-orbital flight regimes with earth shadowing are found to result in much larger torque requirements and impose significant mechanization penalties if serious performance losses are to be avoided. Alternative attitude control mechanization techniques are defined for these cases.

Oglevie, R. E.↗