Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Analysis of Moessbauer Data from Mars: A Database and Artificial Neural Network for Identification of Iron-bearing Phases

The exploration of the planet Mars is one of the major goals within the Solar system exploration programs of the US-American space agency NASA and the European Space Agency ESA. In particular the search for water and life and understanding of the history of the surface and atmosphere will be the major tasks of the upcoming space missions to Mars. The miniaturized Moessbauer spectrometer MIMOS II has been selected for the NASA Mars-Exploration-Rover twin-mission to Mars in 2003 and the ESA 2003 Mars-Express Beagle 2 mission. Reduced in size and weight, in comparison to ordinary laboratory setup, the sensor head just weights approximately 400 g, with a volume of (50x50x90) cu mm, and holds two gamma-ray sources: the stronger for experiments and the weaker for calibrations. The collimator (in sample direction) also shields the primary radiation off the detectors. Around the drive four detectors are mounted. The detectors are made of Si-PIN-photodiodes in chip form (100 sq mm, thickness of 0.5 mm). The control unit is located in a separate electronics board. This board is responsible for the power supply, generation of the drive's velocity reference signal, read of the detector pulses to record the spectrum, data storage and communication with the host computer. After more than four decades from the discovery of the Moessbauer effect, more than 400 minerals were studied at different temperatures. Their Moessbauer parameters were reported in the literature, and have been recently collected in a data bank. Previous Mars-missions, namely Viking and Mars Pathfinder, revealed Si, Al, Fe, Mg, Ca, K, Ti, S and Cl to be the major constituents in soil and rock elemental composition of the red planet. More than 200 minerals already studied by Moessbauer spectroscopy contain significant amounts of these elements. A considerable number of Moessbauer studies were also carried out on meteorites and on Moon samples. Looking backward in the studies of the whole Moessbauer community, we have built a specific library containing Moessbauer parameters of those possible Mars minerals. The selected minerals, their Moessbauer parameter values (min. max. s.d and number of available data), main site substitution, behavior as a function of temperature and a ranking as expected to be found on Mars were organized. Mars-analogue Fe-bearing minerals not studied by Moessbauer spectroscopy are being collected and investigated. In addition, it an identification system based on Artificial Neural Networks (ANN) was implemented which enables fast and precise mineral identification from the experimental Moessbauer parameters at a given temperature.

P A de Souza Jr.↗
DOE OSTI2025

Diffusion and phase formation in the γ-uranium-technetium system

Phase formation in the U-Tc binary system at 800 °C was investigated using a diffusion couple experiment. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) identified four novel potential intermetallic phases - U 7 Tc 3 , U 13 Tc 12 , U 3 Tc 5 , and UTc 4 . Diffusion coefficients were calculated for the intermetallic phases using the Boltzmann-Matano method and were respectively found to be – 120, 38.2, 15.6, and 1.51 × 10 −18 m 2 /s. Tc also exhibits a solid-solution phase with high penetration into the U with a diffusion coefficient of ∼ 10 −14 m 2 /s. Furthermore, these findings expand the number of known U-Tc phases and provide the first diffusion coefficients for the U-Tc system, and contribute valuable data to the broader field of actinide metallurgy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1989

The UV spectrum of Pluto-Charon - IUE observations from 2600 to 3100 A

Observations of the UV spectra of the Pluto-Charon system were obtained between 1987 and 1988 using the large aperture of the IUE long-wavelength prime spectrograph. At the resolution and SNR of the data, no gas-phase spectral identifications were made. The present data indicate a geometric albedo of 0.35 + or - 0.05. Curve fitting the geometric albedo from 2600-3100 A, a blue slope is found which corresponds to a decrease of about 12 percent per 1000 A. An albedo reversal or trough between about 3000 A and the shortest ground-based data (at about 3500 A) is noted which may be due to a spectral absorption feature on the surface.

Stern, S. Alan↗
NASA NTRS1992

Microstructural transitions during containerless processing of undercooled Fe-Ni alloys

In order to identify the possible hierarchy of microstructural pathways and transitions, a systematic evaluation of the microstructural evolution in undercooled Fe-Ni alloys was performed on uniformly processed samples covering seven orders of magnitude in volume. At appropriate undercooling levels, alternate solidification pathways become thermodynamically possible and metastable product structures can result from the operation of competitive solidification kinetics. For thermal history evaluation, a heat flow analysis was applied and tested with large Fe-Ni alloy particles (1 to 3 mm) to assess undercooling potential. Alloy powders (10 to 150 microns), with large liquid undercoolings, were studied under the same composition and processing conditions to evaluate the solidification kinetics and microstructural evolution, including fcc/bcc phase selection and the thermal stability of a retained metastable bcc phase. The identification of microstructural transitions with controlled variations in sample size and composition during containerless solidification processing was used to develop a microstructure map which delineates regimes of structural evolutions and provides a unified analysis of experimental observations in the Fe-Ni system.

Thoma, D. J.↗
NASA NTRS2001

Supernova 1998bw In ESO 184-G82

Over the wavelength range 390-750 nm, we measure intrinsic linear polarization of 0.53 +/- 0.08 percent at position angle 49 +/- 3 deg, after correcting for Galactic interstellar polarization using the star HD 184100, which has polarization of 0.75 +/- 0.01 percent at p.a. 176.5 +/- 2.5 deg. This measured interstellar polarization is consistent with the Galactic extinction in this direction, estimated to be E(B-V) = 0.059 from IRAS maps, or E(B-V) = 0.079 from 21-cm H I. Interstellar polarization in the host galaxy ESO 184-G82 is expected to be negligible based on the relative absence of Na I D absorption at z = 0.00841 +/- 0.00005, the redshift of the environment of the supernova from narrow H II region emission lines in its spectrum. Polarization appears highest in between emission features in the total flux spectrum, which strengthens the interpretation of the polarization as intrinsic to the supernova. This modest polarization is less than that of some type-II supernovae, but greater than that of type-Ia supernovae, which are generally unpolarized. This supports the interpretation of SN 1998bw, a peculiar type-Ic supernova, as a core-collapse event in which the observed polarization is due to moderate asymmetry in either the photosphere of the ejecta or an overlying scattering envelope. However, this result does not strongly constrain arguments about whether some supernovae emit gamma-ray bursts, since such emission may come from a mildly relativistic shock associated with the radio emission and above the optical photosphere, without any requirements on beaming or orientation." A. V. Filippenko, University of California at Berkeley, comments on the total flux spectrum obtained above: "The spectrum most closely resembles those of the peculiar SN 1997ef, but perhaps evolving more slowly. It is not typical of type-Ic supernovae; indeed, the spectrum does not match any of the known spectral classes, but perhaps 'peculiar type Ic' is the best choice at this time. The object appears to be starting a transition to the nebular phase, but identifications of the broad emission features are uncertain. The feature at 650 nm is probably [Fe III], as is the one at 455 nm (perhaps with some contribution from Mg I]). That at 590 nm may be a mixture of [Co III] and Na D. The strongest feature, at 545 nm, may consist of Fe, Co, and Ti lines."

Kay, L. E.↗
NASA NTRS2001

Microstructure, Mechanical Properties, Hot-Die Forming, and Joining of 47XD Gamma TiAl Rolled Sheets

The microstructure and mechanical properties, along with the hot-die forming and joining of Ti-47Al-2Nb-2Mn-0.8 vol% TiB, sheets (known as 47XD), produced by a low-cost rolling process, were evaluated. A near-gamma microstructure was obtained in the as-rolled condition. The microstructures of heat-treated sheets ranged from a recrystallized equiaxed near-gamma microstructure at 1,200 to 1,310 C, to a duplex microstructure at 1,350 C, to a fully lamellar microstructure at 1,376 C. Tensile behavior was determined for unidirectionally rolled and cross-rolled sheets for room temperature (RT) to 816 C. Yield stress decreased gradually with increasing deformation temperature up to 704 C; above 704 C, it declined rapidly. Ultimate tensile strength exhibited a gradual decrease up to 537 C before peaking at 704 C, followed by a rapid decline at 816 C. The modulus showed a gradual decrease with temperature, reaching approximately 72% of the RT value at 816 C. Strain to failure increased slowly from RT to 537 C; between 537 C and 704 C it exhibited a phenomenal increase, suggesting that the ductile-brittle transition temperature was below 704 C. Fracture mode changed from transgranular fracture at low temperature, to a mixture of transgranular and intergranular fracture at intermediate temperature, to ductile fracture at 816 C, coupled with dynamic recrystallization at large strains. Creep rupture response was evaluated between 649 and 816 C over the stress range of 69 to 276 MPa. Deformation parameters for steady-state creep rate and time-to-rupture were similar: activation energies of approximately 350 kJ/mol and stress exponents of approximately 4.5. Hot-die forming of sheets into corrugations was done at elevated temperatures in vacuum. The process parameters to join sheets by diffusion bonding and brazing with TiCuNi 70 filler alloy were optimized for test coupons and successfully used to fabricate large truss-core and honeycomb structures. Nondestructive evaluation methods, e.g., ultrasonic C-scans and thermography along with metallography, were used to characterize bond quality. Microstructural evaluation during heat treatment, identification of phases at the braze/matrix interface, determination of shear strengths of brazed joints, and deformation mechanisms during tensile and creep processes will be discussed.

Das, G.↗
NASA NTRS2007

Identification of Iron-Bearing Phases on the Martian Surface and in Martian Meteorites and Analogue Samples by Moessbauer Spectroscopy

The Moessbauer spectrometers on the Mars Exploration Rovers (MER) Spirit (Gusev Crater) and Opportunity (Meridiani Planum) have each analyzed more than 100 targets during their ongoing missions (>1050 sols). Here we summarize the Fe-bearing phases identified to date and compare the results to Moessbauer analyses of martian meteorites and lunar samples. We use lunar samples as martian analogues because some, particularly the low-Ti Apollo 15 mare basalts, have bulk chemical compositions that are comparable to basaltic martian meteorites [1,2]. The lunar samples also provide a way to study pigeonite-rich samples. Pigeonite is a pyroxene that is not common in terrestrial basalts, but does often occur on the Moon and is present in basaltic martian meteorites

Klingelhoefer, G.↗
NASA NTRS2007

Aqueous Alteration of Basalts: Earth, Moon, and Mars

The geologic processes responsible for aqueous alteration of basaltic materials on Mars are modeled beginning with our knowledge of analog processes on Earth, i.e., characterization of elemental and mineralogical compositions of terrestrial environments where the alteration and weathering pathways related to aqueous activity are better understood. A key ingredient to successful modeling of aqueous processes on Mars is identification of phases that have formed by those processes. The purpose of this paper is to describe what is known about the elemental and mineralogical composition of aqueous alteration products of basaltic materials on Mars and their implications for specific aqueous environments based upon our knowledge of terrestrial systems. Although aqueous alteration has not occurred on the Moon, it is crucial to understand the behaviors of basaltic materials exposed to aqueous environments in support of human exploration to the Moon over the next two decades. Several methods or indices have been used to evaluate the extent of basalt alteration/weathering based upon measurements made at Mars by the Mars Exploration Rover (MER) Moessbauer and Alpha Particle X-Ray Spectrometers. The Mineralogical Alteration Index (MAI) is based upon the percentage of total Fe (Fe(sub T)) present as Fe(3+) in alteration products (Morris et al., 2006). A second method is the evaluation of compositional trends to determine the extent to which elements have been removed from the host rock and the likely formation of secondary phases (Nesbitt and Young, 1992; Ming et al., 2007). Most of the basalts that have been altered by aqueous processes at the two MER landing sites in Gusev crater and on Meridiani Planum have not undergone extensive leaching in an open hydrolytic system with the exception of an outcrop in the Columbia Hills. The extent of aqueous alteration however ranges from relatively unaltered to pervasively altered materials. Several experimental studies have focused upon the aqueous alteration of lunar materials and simulants (e.g., Keller and Huang, 1971; Eick et al., 1996). Lunar basalts are void of water and highly reduced, hence, these materials are initially very reactive when exposed to water under oxidizing conditions.

Ming, Douglas W.↗
DOE OSTI2025

Learning to classify quantum phases of matter with a few measurements

We study the identification of quantum phases of matter, at zero temperature, when only part of the phase diagram is known in advance. Following a supervised learning approach, we show how to use our previous knowledge to construct an observable capable of classifying the phase even in the unknown region. By using a combination of classical and quantum techniques, such as tensor networks, kernel methods, generalization bounds, quantum algorithms, and shadow estimators, we show that, in some cases, the certification of new ground states can be obtained with a polynomial number of measurements. An important application of our findings is the classification of the phases of matter obtained in quantum simulators, e.g. cold atom experiments, capable of efficiently preparing ground states of complex many-particle systems and applying simple measurements, e.g. single qubit measurements, but unable to perform a universal set of gates.

quantum machine learning↗
NASA NTRS1974

Role of man in flight experiment payloads, phase 1

The identification of required data for studies of Spacelab experiment functional allocation, the development of an approach to collecting these data from the payload community, and the specification of analytical methods necessary to quantitatively determine the role of man in specific Spacelab experiments are presented. A generalized Spacelab experiment operation sequence was developed, and the parameters necessary to describe each signle function in the sequence were identified. A set of functional descriptor worksheets were also drawn up. The methodological approach to defining the role of man was defined as a series of trade studies using a digial simulation technique. The tradeoff variables identified include scientific crew size, skill mix, and location. An existing digital simulation program suitable for the required analyses was identified and obtained.

Malone, T. B.↗
NASA NTRS1990

MEASURE: An integrated data-analysis and model identification facility

The first phase of the development of MEASURE, an integrated data analysis and model identification facility is described. The facility takes system activity data as input and produces as output representative behavioral models of the system in near real time. In addition a wide range of statistical characteristics of the measured system are also available. The usage of the system is illustrated on data collected via software instrumentation of a network of SUN workstations at the University of Illinois. Initially, statistical clustering is used to identify high density regions of resource-usage in a given environment. The identified regions form the states for building a state-transition model to evaluate system and program performance in real time. The model is then solved to obtain useful parameters such as the response-time distribution and the mean waiting time in each state. A graphical interface which displays the identified models and their characteristics (with real time updates) was also developed. The results provide an understanding of the resource-usage in the system under various workload conditions. This work is targeted for a testbed of UNIX workstations with the initial phase ported to SUN workstations on the NASA, Ames Research Center Advanced Automation Testbed.

Singh, Jaidip↗
NASA NTRS1971

IMBLMS phase B4, additional tasks 5.0. Microbial identification system

A laboratory study was undertaken to provide simplified procedures leading to the presumptive identification (I/D) of defined microorganisms on-board an orbiting spacecraft. Identifications were to be initiated by nonprofessional bacteriologists, (crew members) on a contingency basis only. Key objectives/constraints for this investigation were as follows:(1) I/D procedures based on limited, defined diagnostic tests, (2) testing oriented about ten selected microorganisms, (3) provide for definitive I/D key and procedures per selected organism, (4) define possible occurrences of false positives for the resulting I/D key by search of the appropriate literature, and (5) evaluation of the I/D key and procedure through a limited field trial on randomly selected subjects using the I/D key.

Source record↗
NASA NTRS1972

Study for identification of beneficial uses of space, phase 1. Volume 1: Executive summary

The technological effects of the Space Shuttle Program are considered in terms of the development of improved products, processes, and services aimed at benefitting the public from economic and sociological points of view. As such, an outline is provided for a large number of private organizations to suggest and identify specific areas of research and development which can most effectively be exploited in an extraterrestrial environment.

Source record↗
NASA NTRS1973

Study for identification of beneficial uses of space, phase 1. Volume 2, book 1: Technical report, introduction, methodology, results

A study was conducted to determine the beneficial uses of space and to identify the products, processes, or services that will be best developed or produced in the unique environment offered by spacecraft. The subjects discussed are: (1) review of study background, (2) specific users and uses, (3) methodology, and (4) basic data generated and significant results.

Source record↗
NASA NTRS1973

Study for identification of beneficial uses of Space, phase 1. Volume 2, book 2: Technical report: results, conclusions and recommendations

A variety of technologies were investigated to determine the benefits to be derived from space activities. The subjects accepted for product development are: (1) eutectics for cold cathodes, (2) higher putiry fiber optics, (3) fluidic wafers, (4) large germanium wafers for gamma ray camera, (5) improved batteries and capacitors, (6) optical filters, (7) corrosion resistant electrodes, (8) high strength carbon-based filaments for plastic reinforcement, and (9) new antibiotics. In addition, three ideas for services, involving disposal of radioactive wastes, blood analysis, and enhanced solar insolation were proposed.

Source record↗