SEARCH · Search NASA
Results for “photodetector”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Spectral Performance of Multilayer Amorphous Selenium and Selenium–Tellurium Photodetectors
The ability to robustly and with scalability detect single photons in the visible spectrum with wavelength resolution would transform many imaging applications. Theoretical studies propose an array of carbon nanotubes (CNTs) functionalized with semiconductor quantum dots (QDs) as a physical realization of such photon sensors. In this work, we report approaches to synthesize these CNT-QD nanostructures using DNA as a smart glue to connect CNTs to QDs.
Accelerated Discovery of Cost-Effective Photoabsorber Materials for Near-Infrared (λ = 1600 nm) Photodetector Applications
Current infrared sensing devices are based on costly materials with relatively few viable alternatives known. To identify promising candidate materials for infrared photodetection, we have developed a high-throughput screening methodology based on high-accuracy r 2 SCAN and HSE calculations in density functional theory. Using this method, we identify ten already synthesized materials between the inverse perovskite family, the barium silver pnictide family, the alkaline pnictide family, and ZnSnAs 2 as top candidates. Among these, ZnSnAs 2 emerges as the most promising candidate due to its experimentally verified band gap of 0.74 eV at 0 K and its cost-effective synthesis through Bridgman growth. BaAgP also shows potential with an HSE-calculated band gap of 0.64 eV, although further experimental validation is required. Lastly, we discover an additional material, Ca 3 BiP, which has not been previously synthesized, but exhibits a promising optical spectra and a band gap of 0.56 eV. The method applied in this work is sufficiently general to screen wider bandgap materials in high-throughput and now extended to narrow-band gap materials.
Single Metal Photodetectors Using Plasmonically-Active Asymmetric Gold Nanostructures
Not provided.
Strategy for Addressing the Low Quantum Efficiency of Nanowire Photodetectors
Not provided.
Dynamic-quenching of a single-photon avalanche photodetector using an adaptive resistive switch
One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al 2 O 3 /Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10× smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.
Customisable X-ray fluorescence photodetector with submicron sensitivity using a ring array of silicon p-i-n diodes
Explore the source record for details and available documents.
Air-transfer production method for large-area picosecond photodetectors
We have designed and prototyped the process steps for the batch production of large-area micro-channel-plate photomultipliers (MCPPMT) using the “air-transfer” assembly process developed with single LAPPD TM modules. Results are presented addressing the challenges of designing a robust package that can transmit large numbers of electrical signals for pad or strip readout from inside the vacuum tube and of hermetically sealing the large-perimeter window–body interface. We have also synthesized a photocathode in a large-area low-aspect-ratio volume and have shown that the micro-channel plates recover their functionality after cathode synthesis. These steps inform a design for a multi-module batch facility employing dual nested low-vacuum and ultra-high-vacuum systems in a small-footprint. The facility design provides full access to multiple MCP-PMT modules prior to hermetic pinch-off for leak-checking and real-time photocathode optimization.
Effects of 63 MeV proton irradiation on the performance of MWIR InGaAs/InAsSb nBn photodetectors
An investigation into the effects of 63 MeV proton irradiation on high-sensitivity mid-wave infrared InGaAs/InAsSb nBn devices is performed. Three different structures with various absorber region doping profiles are irradiated and characterized to assess their impact on performance degradation. Minority carrier lifetime is measured using time-resolved photoluminescence and lifetime damage factors are assessed. The majority carrier concentration is determined via capacitance–voltage measurements and dopant introduction rates are calculated. An analysis of dark current density is performed using these material parameters, revealing a reduction in mobility with proton fluence and the emergence of a proton-induced trap energy level. Quantum efficiency is calculated at each proton fluence, and quantum efficiency damage factors show that the graded doping structure exhibits the least reduction of quantum efficiency with dose, attributed to its effective mobility enhancement. Conclusively, detector sensitivity, assessed via shot-noise limited noise-equivalent irradiance, shows that the graded doping structure is the least susceptible to high energy proton irradiation-induced performance degradation.
Characterization of the DUNE photodetectors and study of the event burst phenomenon
The Deep Underground Neutrino Experiment (DUNE) is an upcoming neutrino physics experiment that will answer some of the most compelling questions in particle physics and cosmology. The DUNE far detectors employ silicon photomultipliers (SiPMs) to detect light produced by charged particles interacting in a large liquid argon time projection chamber (LArTPC). The SiPMs are photosensors consisting of an array of single-photon avalanche diodes (SPAD) operating in Geiger mode. Their high sensitivity and dynamic range, as well as the possibility to fill large surfaces with high-granularity sensors, makes them an ideal choice for DUNE. An international consortium of research groups is currently engaged in a systematic comparison of the performances of the SiPM models that have been custom developed for DUNE by two manufacturers. Such detailed studies, which include gain measurements and a structure study of the dark count rate at 77 K, are meant to determine the best choice of the photodetection system for DUNE, as well as characterize the response of the chosen detectors for the DUNE simulation. Moreover, an investigation of a newly observed phenomenon, in which quick bursts of tens of events at close range are collected in individual SiPMs, is being carried out, which potentially impacts the design of future models and their implementation in particle physics experiments.
Self-Biased Mo/n-4H-SiC Schottky Barriers as High-Performance Ultraviolet Photodetectors
Not provided.
Spectral kernel machines with electrically tunable photodetectors
Spectral machine vision collects spectral and spatial information as three-dimensional hypercubes and digitally processes them, which causes a data bottleneck, limiting power efficiency, frame rate, and spectral-spatial resolution. This work introduces spectral kernel machines (SKMs) to overcome these bottlenecks. SKM directly compresses spectral analysis through the output photocurrent and learns from example objects to identify and classify new samples in a "sniff-and-seek" mode. We experimentally demonstrated SKMs with electrically tunable bipolar black phosphorus-molybdenum disulfide (bP-MoS2) photodiodes in the near- and mid-infrared band and silicon photoconductors in the visible band, performing versatile intelligent tasks from chemometrics to semiconductor metrology. This architecture consumed substantially less power and was more than an order of magnitude faster than existing solutions for hyperspectral image analysis, defining an intelligent imaging and sensing paradigm with intriguing possibilities.
Low-Illumination Level Uni-Traveling Carrier Photodetectors for Quantum Information Science Applications (Final Technical Report)
Explore the source record for details and available documents.
Large Area Picosecond PhotoDetector (LAPPD) definitive tests
The goal of the project was to determine the optimal functional parameters for a new LAPPD, determine the cloud charge radius and test for gain variation due to pore sharing. Also, cosmics tests with C4F8 heavy gas of the new LAPPD were planned.
High Operating Temperature (HOT) InAsSb pBn mid wavelength infrared (MWIR) photodetector for fire flame and medical CO2 detection
Explore the source record for details and available documents.