Search NASA⌕ Search

SEARCH · Search NASA

Results for “polycyclic aromatic hydrocarbons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Hybrid-Lipid Bilayers Induce n -Alkyl-Chain Order in Reversed-Phase Chromatographic Surfaces, Impacting their Shape Selectivity for Aromatic Hydrocarbon Partitioning

Shape selectivity is important in reversed-phase liquid chromatographic separations, where stationary phases are capable of separating geometric isomers, thereby resolving solutes based on their three-dimensional structure or shape rather than other chemical differences. Numerous chromatographic studies have been carried out using n-alkyl-chain-modified columns to understand how molecular shape affects retention. For polycyclic aromatic hydrocarbons (PAHs), it was found that planar compounds were selectively retained over non-planar structures of comparable molecular weight on surfaces with longer n-alkyl chains, higher chain-density, or at lower temperatures, where selectivity likely arises with greater ordering of the n-alkyl chains. A limitation of these studies, however, is the small range of chain ordering that can be achieved and lack of a direct measure of the n-alkyl-chain order of the stationary phases. In this work, we employ a C 18 stationary phase modified with a monolayer of phospholipid as a means of significantly varying the n-alkyl chain order. These hybrid-supported lipid bilayers, which have previously been employed as membrane-like stationary phases for measuring lipophilicity, provide a unique approach to control n-alkyl chain ordering by varying the acyl chain length and degree of unsaturation of the phospholipid modifier. The degree of alkyl-chain order of the resulting modified surfaces is determined from the ratio of trans- versus gauche-conformers, measured in situ within individual porous particles by confocal Raman microscopy. This methodology was also used to assess the affinity of these surfaces for planar versus non-planar PAH molecules. The retention selectivity for the planar versus non-planar compounds, thus determined, was found to vary significantly and systematically with the degree of order of the acyl/alkyl chains in the hybrid-supported lipid bilayers. Furthermore, the investigation also demonstrates the utility of confocal Raman microscopy for interrogating the impact of solute partitioning on stationary-phase structure within porous chromatographic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An experimental and kinetic modeling study of the pyrolysis of isoprene, a significant biogenic hydrocarbon in naturally occurring vegetation fires

Isoprene dominates the carbon flux emitted by vegetation and constitutes 40% of non-methane biogenic emissions worldwide. Despite pyrolysis experiments at temperatures above 1000 K showing a link between isoprene combustion and aromatic species formation, comprehensive mechanistic research on isoprene is scarce in the literature. Here, in this work, we carry out an experimental and theoretical study to build, for the first time, a chemical kinetic model describing isoprene pyrolysis. The formation of polycyclic aromatic hydrocarbon (PAH) precursor species, often observed in vegetation fire plumes, is partially explained by isoprene pyrolysis experiments and theoretical modeling. Molecular dynamics (MD) simulations unveil reaction pathways from allylic isoprenyl radicals to allene and cyclopentadiene (CPD) intermediates, two relevant species detected in the experiments. Rate constants for these identified pathways are calculated using variational transition state theory to update the kinetic model, which is validated against single-pulse shock tube (SPST), and jet-stirred reactor (JSR) experimental data in the temperature range of 850–1690 K. The kinetic model presents satisfactory agreement with the SPST experimental data, and a reaction pathway analysis shows that association of propargyl radicals results in benzene formation. The JSR pathway analysis also identifies the prominent reactions for CPD, benzene, styrene, and toluene formation. Our model does not reproduce the CPD experimental profiles, indicating that additional studies are necessary. Overall, our findings advance the understanding of isoprene pyrolysis and its related atmospheric pollutants in naturally occurring vegetation fires where smoldering and oxygen-deficient combustion processes are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Unified Mechanism on the Formation of Acenes, Helicenes, and Phenacenes in the Gas Phase

Abstract A unified low‐temperature reaction mechanism on the formation of acenes, phenacenes, and helicenes—polycyclic aromatic hydrocarbons (PAHs) that are distinct via the linear, zigzag, and ortho ‐condensed arrangements of fused benzene rings—is revealed. This mechanism is mediated through a barrierless, vinylacetylene mediated gas‐phase chemistry utilizing tetracene, [4]phenacene, and [4]helicene as benchmarks contesting established ideas that molecular mass growth processes to PAHs transpire at elevated temperatures. This mechanism opens up an isomer‐selective route to aromatic structures involving submerged reaction barriers, resonantly stabilized free‐radical intermediates, and systematic ring annulation potentially yielding molecular wires along with racemic mixtures of helicenes in deep space. Connecting helicene templates to the Origins of Life ultimately changes our hypothesis on interstellar carbon chemistry.

Zhao, Long↗
DOE OSTI2020

A Free‐Radical Prompted Barrierless Gas‐Phase Synthesis of Pentacene

Abstract A representative, low‐temperature gas‐phase reaction mechanism synthesizing polyacenes via ring annulation exemplified by the formation of pentacene (C 22 H 14 ) along with its benzo[ a ]tetracene isomer (C 22 H 14 ) is unraveled by probing the elementary reaction of the 2‐tetracenyl radical (C 18 H 11 . ) with vinylacetylene (C 4 H 4 ). The pathway to pentacene—a prototype polyacene and a fundamental molecular building block in graphenes, fullerenes, and carbon nanotubes—is facilitated by a barrierless, vinylacetylene mediated gas‐phase process thus disputing conventional hypotheses that synthesis of polycyclic aromatic hydrocarbons (PAHs) solely proceeds at elevated temperatures. This low‐temperature pathway can launch isomer‐selective routes to aromatic structures through submerged reaction barriers, resonantly stabilized free‐radical intermediates, and methodical ring annulation in deep space eventually changing our perception about the chemistry of carbon in our universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unconventional Pathway in the Gas‐Phase Synthesis of 9 H ‐Fluorene (C 13 H 10 ) via the Radical–Radical Reaction of Benzyl (C 7 H 7 ) with Phenyl (C 6 H 5 )

Abstract The simplest polycyclic aromatic hydrocarbon (PAH) carrying a five‐membered ring—9 H ‐fluorene (C 13 H 10 )—is produced isomer‐specifically in the gas phase by reacting benzyl (C 7 H 7 ⋅) with phenyl (C 6 H 5 ⋅) radicals in a pyrolytic reactor coupled with single photon ionization mass spectrometry. The unconventional mechanism of reaction is supported by theoretical calculations, which first produces diphenylmethane and unexpected 1‐(6‐methylenecyclohexa‐2,4‐dienyl)benzene intermediates (C 13 H 12 ) accessed via addition of the phenyl radical to the ortho position of the benzyl radical. These findings offer convincing evidence for molecular mass growth processes defying conventional wisdom that radical‐radical reactions are initiated through recombination at their radical centers. The structure of 9 H ‐fluorene acts as a molecular building block for complex curved nanostructures like fullerenes and nanobowls providing fundamental insights into the hydrocarbon evolution in high temperature settings.

He, Chao↗
DOE OSTI2022

Unconventional Pathway in the Gas-Phase Synthesis of 9 H -Fluorene (C 13 H 10 ) via the Radical–Radical Reaction of Benzyl (C 7 H 7 ) with Phenyl (C 6 H 5 )

The simplest polycyclic aromatic hydrocarbon (PAH) carrying a five-membered ring - 9H-fluorene (C 13 H 10 ) - is produced isomer-specifically in the gas phase by reacting benzyl (C 7 H 7 •) with phenyl (C 6 H 5 •) radicals in a pyrolytic reactor coupled with single photon ionization mass spectrometry. The unconventional mechanism of reaction is supported by theoretical calculations, which first produces diphenylmethane and unexpectedly 1-(6-methylenecyclohexa-2,4-dienyl)benzene intermediates (C 13 H 12 ) accessed via addition of the phenyl radical to the ortho position of the benzyl radical. These findings offer convincing evidence for molecular mass growth processes defying conventional wisdom that radical–radical reactions are initiated through recombination at their radical centers. Furthermore, the structure of 9H-fluorene acts as a molecular building block for complex curved nanostructures like fullerenes and nanobowls providing fundamental insights into the hydrocarbon evolution in high temperature settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Gas–Phase Preparation of the 14π Hückel Polycyclic Aromatic Anthracene and Phenanthrene Isomers (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) Mechanism

Polycyclic aromatic hydrocarbons (PAHs) imply the missing link between resonantly stabilized free radicals and carbonaceous nanoparticles, commonly referred to as soot particles in combustion systems and interstellar grains in deep space. Whereas gas phase formation pathways to the simplest PAH – naphthalene (C 10 H 8 ) – are beginning to emerge, reaction pathways leading to the synthesis of the 14π Hückel aromatic PAHs anthracene and phenanthrene (C 14 H 10 ) are still incomplete. Here, by utilizing a chemical microreactor in conjunction with vacuum ultraviolet (VUV) photoionization (PI) of the products followed by detection of the ions in a reflectron time-of-flight mass spectrometer (ReTOF-MS), the reaction between the 1'- and 2'-methylnaphthyl radicals (C 11 H 9 •) with the propargyl radical (C 3 H 3 •) accesses anthracene (C 14 H 10 ) and phenanthrene (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) mechanism in conjunction with a hydrogen assisted isomerization. Furthermore, the preferential formation of the thermodynamically less stable anthracene isomer compared to phenanthrene suggests a kinetic, rather than a thermodynamics control of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formation of phenanthrene via H–assisted isomerization of 2–ethynylbiphenyl produced in the reaction of phenyl with phenylacetylene

Model chemistry G3(MP2,CC)//B3LYP/6–311G(d,p) calculations of the potential energy surface for the reaction of phenyl radical (C 6 H 5 ) with phenylacetylene (C 8 H 6 ) have been carried out and combined with Rice–Ramsperger–Kassel–Marcus/Master Equation calculations of temperature– and pressure–dependent rate constants. The results showed that the reaction can serve as a viable source for the formation of phenanthrene via an indirect route involving a primary reaction of phenyl addition to the ortho carbon in the ring of phenylacetylene and H elimination producing 2–ethynylbiphenyl followed by secondary H–assisted isomerization of 2–ethynylbiphenyl to phenanthrene. In the secondary reaction, the H atom adds to the α carbon of the ethynyl side chain, then a six–member ring closure takes place followed by aromatization via an H loss. The channel of H addition to the side chain of 2–ethynylbiphenyl appears to be much faster than H addition to the ortho carbon in the ethynyl–substituted ring leading back to the initial C 6 H 5 + C 8 H 6 reactants. Rate constants for the primary C 6 H 5 + C 8 H 6 ⇌2–ethynylbiphenyl (p1) + H and secondary p1 + H⇌phenanthrene (p2) + H reactions have been computed in the temperature range of 500–2500 K at pressures of 30 Torr, 1, 10, and 100 atm and fitted to modified Arrhenius expressions. Here, the suggested kinetic scheme and rate constants are proposed as a prototype for the modeling of the growth of polycyclic aromatic hydrocarbons via the phenyl addition–dehydrocyclization (PAC) mechanism involving an addition of a PAH radical to an ethynyl–substituted PAH molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modeling the infrared cascade spectra of small PAHs: the 11.2 μm band

The profile of the 11.2 μm feature of the infrared (IR) cascade emission spectra of polycyclic aromatic hydrocarbon (PAH) molecules is investigated using a vibrational anharmonic method. Several factors are found to affect the profile including: the energy of the initially absorbed ultraviolet (UV) photon, the density of vibrational states, the anharmonic nature of the vibrational modes, the relative intensities of the vibrational modes, the rotational temperature of the molecule, and blending with nearby features. Each of these factors is explored independently and influence either the red or blue wing of the 11.2 μm feature. The majority impact solely the red wing, with the only factor altering the blue wing being the rotational temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Burn parameters affect PAH emissions at conditions relevant for prescribed fires

Wildfire smoke is a health hazard as it contains carcinogenic volatile compounds and fine particulate matter. In particular, exposure to polycyclic aromatic hydrocarbons (PAHs) is a major concern, since these compounds have been recognized as important contributors to the overall carcinogenic risk. In this work, gas and particle-phase PAH emissions from combustion of Eastern White Pine (Pinus strobus) were quantified using time-of-flight mass spectrometry over a range of burn conditions representative of wildfires and prescribed fires, including fuel moisture, heat flux, and oxygen concentration. We found that changing the burn environment lead to a variability of up to 77% in phenanthrene/anthracene emissions. This could explain a large part of the variability in PAH emission factors from biomass combustion reported in the literature. Here, we found that optimal conditions for fuel moisture content of 20–30%, sample heat load of 60 - 70 kW m -2 , and oxygen concentrations of 5–15% can significantly reduce the emissions of heavy molar weight PAHs. Our analysis showed that the relative carcinogenic risk from PAH exposure can be reduced by more than 50% under optimal conditions. In light of the increasing use of prescribed fire for forest management, the relationship between emissions and burn conditions that we have established provides a guidance for assessing the expected health impact from prescription burns, and can inform strategies to reduce PAH emissions from prescribed fire activities.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Large-scale atomistic model construction of subbituminous and bituminous coals for solvent extraction simulations with reactive molecular dynamics

Large-scale atomistic models for complex polycyclic aromatic hydrocarbon systems help understand the chemical properties and behaviors of complex feedstocks such as coal or petroleum. However, the development and utilization of large-scale models remain limited due to the difficulty in achieving the varied structural characteristics necessary to capture stochastic nature of these feedstocks. Here we demonstrate a systematic workflow to construct stochastic molecular systems from a broad analytical suite: high-resolution transmission electron microscopy (HRTEM), carbon-13 nuclear magnetic resonance spectroscopy ( 13 C NMR), laser desorption ionization mass spectroscopy (LDI-MS), and elemental analysis. We present a model construction and analysis utility of a new Python-based module. We selected one subbituminous and three high-volatile bituminous coals to construct large-scale models (~40,000 atoms). The constructed models were utilized to examine the affinity for solvent extraction (naphthalene or tetralin) and the effect of structural properties (e.g., aromatic cluster size, functional groups, and cross-linking) in reactive molecular dynamics simulations. Complex chemical reactions were monitored with bond order transitions, intermediates formation, and mass distributions. Reactive molecular dynamics simulations suggest a plausible chemical extraction process and products for the complex fossil feedstocks. The results indicated that radical formations with bond breaking of bridging oxygens and carbons were required at high temperatures to facilitate hydrogeneration and extraction of gas molecules from radical-free molecules. We observed that aliphatic chains of tetralin were easily decomposed and combined with radicals to form small size of molecules with aryl bonding, mainly increasing molecules in the 500–1000 Da, while naphthalene had little impact on chemical extraction process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Planar, curved and twisted molecular nanographenes: Reduction-induced alkali metal coordination

Planar and curved polycyclic aromatic hydrocarbons (PAHs) attract significant attention as molecular models of fullerenes, carbon nanotubes, and graphene, thus stimulating broad investigation of chemical reactivity and materials applications of designed nanocarbon π-systems. Non-planar molecular nanographenes (NGs) recently emerge as advanced anode materials in energy storage, showing high reduction limits and enhanced alkali metal intercalation levels. However, the lack of direct structure–property correlations in such complex hybrid systems impedes their further development and utilization. With a focus on alkali-metal-induced reduction of selected PAHs, we herein review original metal binding and intercalation trends, site specific coordination, and distinct carbon framework responses to stepwise electron uptake. Small planar graphene fragments, like triphenylene and coronene, are compared to π-expanded hexabenzocoronenes, followed by the discussion of bowl-shaped corannulene, sumanene and other carbon bowls, as well as bent, warped, and twisted molecular nanographenes. The effect of size, symmetry, and framework topology along with the structural deformation of carbon backbones upon reduction are analyzed, using recent crystallographic examples of alkali-metal intercalated products. In conclusion, the revealed insights into the structures, binding, and metal intercalation in molecular nanographenes should stimulate their future applications as new functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Analysis of persistent contaminants and personal care products by dispersive liquid-liquid microextraction using hydrophobic magnetic deep eutectic solvents

Here, in this work, hydrophobic magnetic deep eutectic solvents (HMDESs) were used in the development of a simple and rapid dispersive liquid-liquid microextraction (DLLME) approach coupled to high performance liquid chromatography with UV detection (HPLC-UV) for the determination of ten organic contaminants including five polycyclic aromatic hydrocarbons, four UV filters, and a pesticide from water at trace levels. The HMDESs were prepared by mixing a hydrogen bond acceptor, metal halide salt, and hydrogen bond donor in suitable molar ratios. Two HMDESs, 2 tetraoctylammonium bromide ([N 8888 + ][Br - ]): cobalt chloride (CoCl 2 ): 4 octanoic acid (OA) and 3 trioctylphosphine oxide (TOPO): neodymium chloride (NdCl 3 ): 3 OA, offered the highest analyte extraction efficiency overall and were chosen as suitable solvents for validation of the microextraction method. Under optimized extraction conditions, the method required 30 µL of HMDES as extraction solvent, acetone (87.5 µL) as disperser solvent, a NaCl concentration of 30% (w/v), and an extraction time of 120 s at 20°C. Enrichment factors of the analytes ranged from 44.6 for 3-(4-methylbenzylindene) camphor to 66.0 for 2-ethylhexyl-4-(dimethyl)aminobenzoate. The method provided low limits of detection (LODs) ranging from 0.5 to 4.5 µg L -1 , and acceptable precision, with RSD values lower than 9.6%. Furthermore, the validated method was successfully applied for tap and lake water analysis, resulting in relative recoveries of spiked samples ranging between 94.7 and 119.2%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

PAH formation from jet stirred reactor pyrolysis of gasoline surrogates

Soot particles and their precursor polycyclic aromatic hydrocarbon (PAH) species, formed during combustion, are responsible for particulate emissions in gasoline direct injection (GDI) engines. To better understand the effects of fuel composition on formation of soot in GDI engines, the pyrolysis of several gasoline surrogates was studied in a jet-stirred reactor across a broad temperature range at atmospheric pressure and 1 s residence time. Fuel and intermediate species, including aromatics up to naphthalene, were measured using gas chromatography (GC). PAH concentrations from pyrolysis of surrogate fuels were compared to gain insight into the effects of fuel composition on PAH formation. In addition, synergistic effects were observed in pyrolysis experiments of binary blends. A detailed kinetic model, recently developed at Lawrence Livermore National Laboratory (LLNL), successfully captured the effects of blending and the concentration of major PAHs. Major reaction pathways are discussed, as well as the role of important intermediate species, such as acetylene, and resonantly stabilized radicals such as allyl, propargyl, cyclopentadienyl, and benzyl in the formation of PAH.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dedication to James A. Miller

This special memorial issue pays tribute to James (Jim) A. Miller, a giant of combustion science who died in 2021, with a celebration of his enormous influence on the field. We were touched by the responses we received after we sent out the invitations for it. Jim inspired several generations of scientists, who viewed him as a mentor, a father figure, and a friend. Together with Nils Hansen and Peter Glarborg, we have written a detailed account on his life and work. Furthermore, it appeared in this journal shortly after his death; and so here we focus on the scientific areas he had interest in and influence on, and how they relate to the 34 papers in this issue. The topics of these papers span a variety of Jim's interests including nitrogen chemistry, polycyclic aromatic hydrocarbon (PAH) chemistry, oxidation chemistry, energy transfer, prompt dissociations, and codes to facilitate combustion chemistry simulations.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Photodissociation dynamics of xylene isomers C 6 H 4 (CH 3 ) 2 at 157nm using an ultracompact velocity map imaging spectrometer – The C 7 H 7 channel

Here, we investigated the photodissociation dynamics of three xylene isomers C 6 H 4 (CH 3 ) 2 at 157nm. The center-of-mass translational energy distributions of C 7 H 7 radicals were found to peak at 26kJmol −1 . Although the ionization energy of the C 7 H 7 tolyl fragment exceeds the energy of a 157nm photon, C 7 H 7 + was observed as a result of the photoionization of vibrationally ‘hot’ tolyl (C 7 H 7 ) radicals and/or two-photon ionization. The formation of rovibrationally excited tolyl fragments was discussed. Our experiments suggest the presence of tolyl radicals in the interstellar medium as a precursor to methylated polycyclic aromatic hydrocarbons upon reaction with vinylacetylene (C 4 H 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The effect of wood composition and supercritical CO 2 extraction on charcoal production in ferroalloy industries

This work demonstrates that the integration of supercritical carbon dioxide extraction with slow pyrolysis is an effective method for the production of value-added chemicals and charcoal that is an attractive alternative to coke for industry. Integration of technologies is key for the development of holistic biorefineries that exploit all parts of the biomass feedstock and generate little or ideally no waste. In fact, the use of waste or low valued wood fractions is attractive due to their plentiful abundance and lack of exploitation. Supercritical carbon dioxide has been demonstrated to be effective at the removal of over half of extractives from low quality wood and forestry wastes, which can account for up to 11 wt %, of the dried biomass in waste needles. High extractive yields by supercritical carbon dioxide extraction illustrates the potential of utilizing low quality wood as an alternative feedstock for the sustainable production of value-added chemicals. We report high yields of steroids and derivatives, terpenes and other plant metabolites were obtained in the extracts of needles, branches and bark. Importantly, supercritical carbon dioxide extraction had little impact neither on the physical properties of original wood nor on the yield of solid charcoal. This indicates that extraction by supercritical carbon dioxide can be used as a method for adding further value to the process by removal of bio-based chemicals, whilst still maintaining the yield of the solid fuel product. Moreover, the heat treatment temperature and supercritical carbon dioxide extraction had a significant impact on the tar yields during pyrolysis, leading to an increase in naphthalene, polycyclic aromatic hydrocarbons, aromatic and phenolic fractions with greater temperature. These results are promising as they show that the charcoal obtained from this renewable feedstock could be used as an alternative to fossil-based coke in applications including ferroalloy industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chemical changes in thirdhand smoke associated with remediation using an ozone generator

Ozonation is a common remediation approach to eliminate odors from mold, tobacco and fire damage in buildings. Little information exists to: 1) assess its effectiveness; 2) provide guidance on operation conditions; and 3) identify potential risks associated with the presence of indoor ozone and ozonation byproducts. The goal of this study is to evaluate chemical changes in thirdhand smoke (THS) aerosols induced by high levels of ozone, in comparison with THS aerosols aged under similar conditions in the absence of ozone. Samples representing different stages of smoke aging in the absence of ozone, including freshly emitted secondhand smoke (SHS) and THS, were collected inside an 18-m 3 room-sized chamber over a period of 42 h after six cigarettes were consumed. The experiments involved collection and analysis of gas phase species including volatile organic compounds (VOCs), volatile carbonyls, semivolatile organic compounds (SVOCs), and particulate matter. VOC analysis was carried out by gas chromatography/mass spectrometry with a thermal desorption inlet (TD-GC/MS), and volatile carbonyls were analyzed by on-line derivatization with dinitrophenylhydrazine (DNPH), followed by liquid chromatography with UV/VIS detection. SVOCs were extracted from XAD-coated denuders and Teflon-coated fiberglass filters in the absence of ozone. In those extracts, tobacco-specific nitrosamines (TSNAs) and other SVOCs were analyzed by gas chromatography with positive chemical ionization-triple quadrupole mass spectrometric detection (GC/PCI-QQQ-MS), and polycyclic aromatic hydrocarbons (PAHs) were quantified by gas chromatography with ion trap mass spectrometric detection (GC/IT-MS) in selected ion monitoring mode. Particulate matter concentration was determined gravimetrically. In a second experiment, a 300 mg h -1 commercial ozone generator was operated during 1 h, one day after smoke was generated, to evaluate the remediation of THS by ozonation. VOCs and volatile carbonyls were analyzed before and after ozonation. Extracts from fabrics that were exposed in the chamber before and after ozonation as surrogates for indoor furnishings were analyzed by GC/IT-MS, and aerosol size distribution was studied with a scanning mobility particle sizer. Ozone concentration was measured with a photometric detector. An estimated 175 mg ozone reacted with THS after 1 h of treatment, corresponding to 58% of the total O 3 released during that period. Fabric-bound nicotine was depleted after ozonation, and the surface concentration of PAHs adsorbed to fabric specimens decreased by an order of magnitude due to reaction with ozone, reaching pre-smoking levels. These results suggest that ozonation has the potential to remove harmful THS chemicals from indoor surfaces. However, gas phase concentrations of volatile carbonyls, including formaldehyde, acetaldehyde and acetone were higher immediately after ozonation. Ultrafine particles (UFP, in most cases with size <60 nm) were a major ozonation byproduct. UFP number concentrations peaked shortly after ozonation ended, and remained at higher-than background levels for several hours. Based on these results, minimum re-entry times after ozone treatment were predicted for different indoor scenarios. Clearly defining re-entry times can serve as a practical measure to prevent acute exposures to ozone and harmful ozonation byproducts after treatment. This study evaluated potential benefits and risks associated with THS remediation using ozone, providing insights into this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗