SEARCH · Search NASA
Results for “polymer nanocomposite”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Polymer Conformations and Diffusion Through a Monolayer of Confining Nanoparticles
We present coarse-grained molecular dynamics simulations to probe chain-scale polymer conformations and diffusion between confining nanoparticles (NPs). By constructing a monolayer of hexagonally-packed NPs in a polymer melt with athermal interactions, we observe the magnitude and length-scale over which homogeneously confining NPs impact the polymer behavior, which provides fundamental insights into more complex polymer nanocomposites. We show that polymer conformations are more perturbed under strong confinement (i.e. when the interparticle distance, ID, is less than twice the polymer radius of gyration, 2R g ) as compared to around an isolated NP, and the effect depends on the ratio of R NP /R g rather than either independently. In fact, these conformations can be quantitatively replicated by executing a simple random walk in a similarly confining environment. We also show that polymer diffusion is slowed by the presence of NPs and the slowing persists far beyond the length-scale over which polymer conformations are perturbed. Although the slowing is strongest ~R g from the NPs, the diffusion coefficient is slower even beyond ~5R g from the NPs. Furthermore, by analyzing the directional van Hove distributions, we show polymer diffusion away from the NP monolayer is bulk-like while diffusion through the monolayer is slower with increasing NP confinement. Furthermore, these molecular dynamics simulations provide fundamental insights into the temporal and spatial effect of confining, athermal NPs on chain-scale polymer conformations and diffusion.
Investigating the dielectric constant of barium titanate in a polymer-matrix nanocomposite
Barium titanate (BTO) is a ferroelectric material used in capacitors because of its high bulk dielectric constant. However, the impact of the size of BTO on its dielectric constant is not yet fully understood and is highly contested. Here, we present an investigation into the dielectric constant of BTO nanoparticles with diameters ranging between 50 and 500 nm. BTO nanoparticles were incorporated into acrylonitrile butadiene styrene and injection molded into parallel plate capacitors, which were used to determine nanocomposite dielectric constants. The dielectric constants of BTO nanoparticles were obtained by combining experimental measurements with computational results from COMSOL simulations of ABS-matrix nanocomposites containing BTO. The dielectric constant of BTO was observed to be relatively constant at nanoparticle diameters as small as 200 nm but sharply declined at smaller nanoparticle sizes. Overall, these results will be useful in the development of improved energy storage and power conditioning systems utilizing BTO nanoparticles.
Investigating Structure-Properties Relationships in Polymer-Matrix Nanocomposites Containing Barium Titanate Nanoparticles
Explore the source record for details and available documents.
Ultrathin corrosion barrier films enabled by layer-by-layer polymer clay nanocomposites.
Abstract not provided.
Critical Role of the Interfacial Layer in Associating Polymers with Microphase Separation
Polymers with dynamic (transient) bonds, often called associating polymers, have been attracting significant attention in recent years due to their unique viscoelastic properties, self-healing ability, and recyclability. Nevertheless, understanding the mechanisms and the factors controlling their macroscopic properties remains limited due to the higher complexity introduced by the dynamic bonds. Here in this study, small-angle X-ray scattering (SAXS), broadband dielectric spectroscopy (BDS), and rheology were applied to unravel the structure and dynamics of telechelic associating polymers with different molecular weights. SAXS measurements revealed phase separation of the functional end groups with an average cluster size of ~2–3 nm and the distance between clusters controlled by the chain length. Borrowing the interfacial layer model analysis of BDS data from the polymer nanocomposite field, we demonstrated the presence of an interfacial polymer layer with a thickness of ~0.7–0.9 nm surrounding these clusters. Rheological measurements showed quantitatively that the presence of the interfacial layer significantly alters the viscoelastic behavior of these materials, indicating the crucial role of the interfacial layer in defining the macroscopic mechanical properties of the studied telechelic materials. The presented results emphasize that phase separation of the functional groups in associating polymers leads to very significant changes of the viscoelastic properties, opening a promising avenue in the design of novel functional materials.
Direct ink writing of shear exfoliated two-dimensional nanomaterial- elastomeric multifunctional nanocomposite
Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman analysis. Incorporating exfoliated graphene (40 wt%) increased viscosity by ∼6 orders of magnitude due to enhanced particle–matrix interactions, leading to pronounced yield stress behavior and a yield stress of approximately 1598 Pa, which enabled excellent shape retention during extrusion. Using the DIW technique, porous structures such as desalination membranes, self-sensing bone scaffolds, thermal management coating, and serpentine strain sensors were fabricated. When tested in a direct contact membrane distillation setup, the fabricated membrane demonstrated a promising permeate flux of 21.85 Lm −2 h −1 and a salt rejection of 74.3 %. The fabricated serpentine sensor exhibited stable signal variations under cyclic tensile loading, with a working range of 0–200 % strain and a maximum gauge factor of 43,735. A cell culture test using the printed bone scaffold demonstrated promising cell attachment and proliferation. The DIW printed hBN nanocomposite exhibited reversible shape change under heat, demonstrating potential 4D printing capability and efficient thermal management when exposed to high heat or flame.
Tuning the Properties of Nanocomposites by Trapping Them in Deep Metastable States
We report the interfacial region formed in a polymer matrix around nanoparticles (NPs) controls many macroscopic properties of polymer nanocomposites (PNCs). However, understanding the factors controlling structure and properties of interfacial region remains a challenge. We demonstrated that the initial trapping of polymer chains at surfaces of NPs in solution strongly affects the macroscopic properties of PNCs. The most surprising result is that the differences in properties of PNCs persist even after an extremely long thermal annealing time. We ascribe the observed changes to the formation of interfacial layer that is trapped in a deep metastable state already in solution. Furthermore, presented analysis suggests that PNC equilibration time is defined by the chain desorption time that can be extremely long and, in some cases, even not accessible on a reasonable experimental time scale. These results highlight the importance of polymer solution concentrations on the formation of interfacial layer and the macroscopic properties of PNCs.
Sulfides mediate the migration of nanoparticle mass out of nanocomposite plastics and into aqueous environments
We show that inorganic sulfides strongly influence transfer (migration) of nanoparticle mass out of polymer nanocomposites (PNCs) and into aqueous environments. We first manufactured two families of PNCs: one incorporating silver nanoparticles (AgNPs) and one incorporating CdSe quantum dots (QDs). Then, we assessed migration out of these PNCs and into aqueous media containing Na 2 S at concentrations ranging from 0 to 10 -4 M. Results show that Na 2 S strongly suppressed migration of Ag from AgNP-based PNCs: the migration into water spiked with 10 -6 M Na 2 S was 79% less than migration into water without Na 2 S, and no migration was detected (LOD ≈ 0.01 ng/cm 2 ) in water spiked with Na 2 S at 10 -5 M or 10 -4 M. With CdSe QD-based PNCs, Na 2 S suppressed Cd migration but enhanced Se migration, resulting in only a small net effect on the total QD migration but a large shift of the leachate composition (from favoring Cd by an average of 5.8 to 1 in pure water to favoring Se 9.4 to 1 when Na 2 S was present at 10 -4 M). These results show that common inorganic substances like sulfides may play a strong role in determining the environmental fate of polymer-dispersed nanoparticles and imply that migration tests conducted in purified water may not always accurately reflect migration into real environments.
Nonlinear Architectures Can Alter the Dynamics of Polymer–Nanoparticle Composites
Polymer nanocomposites exhibit remarkable physical properties that are attractive for many applications. These systems have been so far investigated by using linear polymer chains; the role of polymer matrix architecture on local dynamics, bulk rheology and nanoparticle motion remains unexplored. Here, using quasielastic neutron scattering, bulk rheology and x-ray photon correlation spectroscopy, we investigated nanocomposites with spherical silica nanoparticles well dispersed in poly (ethylene oxide) matrices having different architectures (specifically linear, stars and hyperbranched). The results reveal that the mechanical reinforcement of the nanocomposites with the nonlinear polymers can be altered by orders of magnitude with respect to the conventional nanocomposite with the linear polymer. Additionally, the polymer compactness and inter-penetrability are found to play crucial roles in determining their bulk rheology. At microscopic level, average segmental dynamics is remarkably slowed down by the attractive NPs in the matrices of high degree of branching whereas no significant effect is observed in linear polymer matrix at the same NP loading. In addition, the nanoscale dynamics of particles in the compact nonlinear matrices exhibit strong decoupling from the bulk viscoelasticity, allowing their fast relaxation even at ≈ 30% by volume. These results provide an experimental evidence that macromolecular architecture is a powerful new tool for tuning the bulk rheological properties as well as the nanoscale dynamics of PNCs without the need for changing polymer molecular weight, nanoparticle size, shape, loading or dispersion state.
Topological structure enhanced nanostructure of high temperature polymer exhibiting more than ten times enhancement of dipolar response
Nanofillers in polymer composites will induce interface regions in the polymer with non-uniform nanostructures which can be approximated as multilayer shells surrounding nanofillers. This paper studies topological nanostructures in polymers that interface with one-dimensional (1-D) and zero-dimensional (0-D) nanofillers. This new class of dielectric polymer nanocomposites involves nanofillers at ultra-low volume loading (< 1 vol percent) that generate large dielectric enhancement. The results show that the dipolar response of polyetherimide, a high temperature dielectric polymer, is increased by more than ten times with ultra-low (0.75 vol %) loading of 1-D nanofillers. The results reveal that 1-D nanofillers induce cylindrical shell-topology in the polymer matrix which is more effective in enhancing the high dielectric constant interfacial region than the spherical shell-topology generated by 0-D fillers. Furthermore, the cylindrical shells generated by 1-D fillers provide much higher dielectric enhancement over a broader interfacial region in the polymer matrix, as compared to the spherical shells induced by 0-D nanofillers.
Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics
Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C 8 ) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C 18 ) and shorter (C 8 ) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C 8 -grafting allows for a more progressive tuning, which goes beyond a pure mass effect.
Nanoparticle Assembly in High Polymer Concentration Solutions Increases Superlattice Stability
Explore the source record for details and available documents.
Bridging-Controlled Network Microstructure and Long-Wavelength Fluctuations in Silica-Poly(2-vinylpyridine) Nanocomposites: Experimental Results and Theoretical Analysis
Explore the source record for details and available documents.
Localized and Collective Dynamics in Liquid-like Polyethylenimine-Based Nanoparticle Organic Hybrid Materials
In this work, broadband dielectric spectroscopy, rheology, and nuclear magnetic resonance spectroscopy are employed to study molecular dynamics in a nanoparticle organic hybrid materials(NOHMs)system comprising 20 wt% silica nanoparticles ionically-bonded to a polyethylenimine canopy. By comparing the neat polymer (used as a canopy) to the derivative NOHMs, we find that timescales characterizing segmental dynamics in the NOHM are identical to those for the neat polymer. Detailed analysis of the carbon-spin lattice relaxation times yields mechanistic insights into localized and collective dynamics, in quantitative agreement with dielectric results. Interestingly, the NOHMs retain liquid-like characteristics unlike conventional polymer nanocomposites but exhibit higher viscosity due to additional contributions from tethered polymer chains, and mesoscopic structuring. These findings demonstrate the potential of achieving unique and desired material properties via NOHMs by an informed choice of the canopy material.
Fundamentals of Scalable Nanoparticle Assembly in Engineering Polymres
Systematically improving the properties of polymer nanocomposites is contingent on effectively controlling nanoparticle (NP) dispersion; further, it is necessary to attain this at scale if these methods are to impact practical applications. While most past work has focused on amorphous polymers, ≈ 70% of all polymers sold annually are semicrystalline. Inspired by this apparent disconnect, our work in the current DOE funded grant and this renewal proposal employs a novel handle, polymer crystallization, to organize NPs into the various amorphous zones of the lamellar semicrystalline morphology (interlamellar, interfibrillar and interspherulitic domains) of stereoregular polymers. We hypothesize that the isothermal crystallization rate of a polymer host, G, and NP diffusivity, are the two relevant control parameters in this context. In the case where the NPs are miscible in the melt, they remain spatially well-dispersed when the polymer is crystallized at a rate that is fast relative to NP diffusion. In contrast, monolayer-thick NP sheets with intersheet spacing of ~10-100nm form in slowly crystallized samples. This sheet stacking is remarkably similar to that seen in natural materials, e.g., Nacre. There is also ordering of the NPs at the larger interfibrillar scale. Importantly, the relative fraction of engulfed, interlamellar and interfibrillar NPs is determined by G. Further, the modulus of these materials can increase by a factor of 2-3 due to the organization state of the NPs, while leaving fracture toughness unaffected. We have established the broad applicability of this approach in two polymers, polyethylene (PE) and polyethyleneoxide (PEO). To achieve this goal we developed a method for grafting long PE chains from NPs with controlled graft density and molecular weight, giving us the ability to tailor their dispersion in the PE melt prior to crystallization. In this renewal proposal, we will develop the fundamental, quantitative understanding that will allow us to independently tailor polymer crystallization rate, NP diffusivity and NP agglomeration state in semicrystalline polymers so as to facilely control NP ordering and hence properties. A program that tightly integrates experiment and theory is proposed, and a key outcome of this research will be a three-dimensional design map for different regimes of NP organization (and hence properties) that can be achieved by polymer crystallization. A second independent outcome is the role of directional solidification and how it competes with the rates of polymer crystallization and NP mobility to affect the organization of the NP.
High performance polymers for oil and gas applications
Proper material selection has been one of the most important aspects in the design of chemical process equipment. In particular, the oil and gas industry has transitioned from using metals to non-metals (e.g. advanced and high performance polymeric materials) in most of their structural components, coatings, equipment parts, and the like. It is therefore imperative to understand the advantages and limitations of these polymer materials before they can be effectively used for a specific application. This review article aims to provide an overview of the properties, applications, and durability against reactivity and degradation of high performance polymers commonly used in the oil and gas industry. These include polysulfone, polyetherimide, polyphenylene sulfide, polyetheretherketone, fluoropolymers, and other high performance thermosets, elastomers, and polymer nanocomposites. Further, this article covers the current research efforts in improving the properties of high performance polymers and expanding their applications (including 3D printing or additive manufacturing) in the oil and gas industry.