Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluating the effects of structural disorder on the magnetic properties of Nd 2 Zr 2 O 7

Motivated by the variation in reported lattice parameters of floating-zone-grown Nd 2 Zr 2 O 7 crystals, we have performed a detailed study of the relationship between synthesis environment, structural disorder, and magnetic properties. Using a combination of polycrystalline standards, electron-probe microanalysis, and scattering techniques, we show that crystals grown under atmospheric conditions have a reduced lattice parameter relative to pristine polycrystalline powders due to occupation of the Nd site by excess Zr (i.e., negative stuffing). In contrast, crystals grown under high-pressure Ar are nearly stoichiometric with an average lattice parameter approaching the polycrystalline value. While minimal disorder of the oxygen sublattices is observed on the scale of the average structure, neutron pair-distribution function analysis indicates a highly local disorder of the oxygen coordination, which is only weakly dependent on growth environment. Most importantly, our magnetization, heat capacity, and single-crystal neutron scattering data show that the magnetic properties of crystals grown under high-pressure Ar match closely with those of stoichiometric powders. Neutron scattering measurements reveal that the signature of magnetic moment fragmentation—the coexistence of all-in-all-out (AIAO) magnetic Bragg peaks and diffuse pinch-point scattering due to spin-ice correlations–persists in these nearly stoichiometric crystals. However, in addition to an increased AIAO transition temperature, the diffuse signal is seemingly stabilized and remains nearly unchanged upon warming to 800 mK. This behavior indicates that both the AIAO magnetic order and spin-ice correlations are sensitive to deviations of the Nd stoichiometry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Method to derive the infrared complex refractive indices n(λ) and k(λ) for organic solids from KBr pellet absorption measurements

Obtaining the complex refractive index vectors $n($$\tilde{v})$ and $k($$\tilde{v})$ allows calculation of the (infrared) reflectance spectrum that is obtained from a solid in any of its many morphological forms. Here, we report an adaptation to the KBr pellet technique using two gravimetric dilutions to derive quantitative $n($$\tilde{v})$/$k($$\tilde{v})$ for dozens of powders with greater repeatability. The optical constants of bisphenol A and sucrose are compared to those derived by other methods, particularly for powdered materials. The variability of the $k$ values for bisphenol A was examined by 10 individual measurements, showing an average coefficient of variation for $k$ peak heights of 5.6%. Though no established standards exist, the pellet-derived $k$ peak values of bisphenol A differ by 11% and 31% from their single-angle- and ellipsometry-derived values, respectively. These values provide an initial estimate of the precision and accuracy of complex refractive indices that can be derived using this method. Limitations and advantages of the method are discussed, the salient advantage being a more rapid method to derive $n$/$k$ for those species that do not readily form crystals or specular pellets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2026

Frustration-driven magnetic correlations in the spin-$\frac{5}{2}$ triangular lattice antiferromagnet RbFe⁢(HPO 3 ) 2

Here, a detailed study of the structural and magnetic properties of a spin-5/2 triangular lattice antiferromagnet RbFe⁢(HPO 3 ) 2 is presented using x-ray diffraction, magnetization, heat capacity, and 31 P nuclear magnetic resonance (NMR) experiments on a polycrystalline sample. The crystal structure features an equilateral triangular lattice of Fe 3+ ions. The thermodynamic measurements reveal the onset of a magnetic long-range order at 𝑇 N⁢1 ≃7.8K in zero field, followed by another low-temperature field-induced ordering at 𝑇 N⁢2 in higher fields. The transition at 𝑇 N⁢1 is further confirmed from the NMR spin lattice relaxation measurements. The value of the frustration ratio (𝑓≃7) implies moderate spin frustration in the compound. The 31 P NMR spectra exhibit two distinct spectral lines corresponding to two inequivalent phosphorus sites (P1 and P2), consistent with the crystal structure. The P1 site is strongly coupled with an isotropic hyperfine coupling of 𝐴$^{iso}_{hf}$ = 0.55⁢(2)⁢ T/𝜇 B while the P2 site is weakly coupled with 𝐴$^{iso}_{hf}$ = 0.25⁢(3)⁢ T/𝜇 B with the Fe 3+ ions. The magnetic susceptibility and NMR shift data are described well assuming a spin-5/2 isotropic triangular lattice antiferromagnetic model with an average exchange coupling of 𝐽/𝑘 B = 2.8⁢(2)⁢K. Below 𝑇 N⁢1 , the spectra evolve into a nearly rectangular powder pattern, indicating a commensurate antiferromagnetic type order. The 31 P spin-lattice relaxation rate well below 𝑇N⁢1 follows a 𝑇 3 temperature dependence, implying a two-magnon Raman scattering mechanism in the ordered state. Three well-defined phase regimes are clearly ascertained in the 𝐻−𝑇 phase diagram, reflecting a weak magnetic anisotropy in the compound.

Nagpal, V. [Indian Institute of Science Education ↗
DOE OSTI2020

Two-step route to size and shape controlled gibbsite nanoplates and the crystal growth mechanism

Mastery of gibbsite (α-Al(OH) 3 ) nucleation and crystal growth is significant in fundamental aluminum chemistry and also beneficial for industrial applications and the remediation of nuclear waste. Herein, we developed an additive-free two-step route to size and morphology controlled synthesis of gibbsite nanoplates. Independent temperature manipulation of nucleation and crystal growth regimes was used to control the efficacy and yield of the process, producing gibbsite nanoplates with tunable morphologies and sizes. We achieve morphologies ranging from hexagon, pseudo hexagon, truncated triangle to rhombic, and average basal plane diameters from 120 to 850 nm, with thicknesses between 8 and 45 nm. Analysis of gibbsite structure, size and morphology with techniques including powder X-ray diffraction (p-XRD), 27 Al magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR), scanning electron microscopy (SEM), and atomic force microscopy (AFM) provided key details on the nucleation and crystal growth mechanisms. The results indicate the temperature of the nucleation aging step is the most important factor controlling the final particle size. Particularly small nanoplates were obtained with a low nucleation aging temperature followed by high crystal growth temperature, suggesting that gibbsite growth can be approximated via a LaMer-type burst nucleation and crystal growth mechanism. Scalability was demonstrated by triplicate of 2 L experiments which prepared gibbsite nanoplates of ~200 nm size and with an average yield of ~55% after 84 h. Compared to existing techniques, this improved two-step route is cheaper, more efficient and environmentally friendly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

The Effects of Gravity on Combustion and Structure Formation During Combustion Synthesis in Gasless Systems

There have been relatively few publications examining the role of gravity during combustion synthesis (CS), mostly involving thermite systems. The main goal of this research was to study the influence of gravity on the combustion characteristics of heterogeneous gasless systems. In addition, some aspects of microstructure formation processes which occur during gasless CS were also studied. Four directions for experimental investigation have been explored: (1) the influence of gravity force on the characteristic features of heterogeneous combustion wave propagation (average velocity, instantaneous velocities, shape of combustion front); (2) the combustion of highly porous mixtures (with porosity greater than that for loose powders), which cannot be obtained in normal gravity; (3) the effect of gravity on sample expansion during combustion, in order to produce highly porous materials under microgravity conditions; and (4) the effect of gravity on the structure formation mechanism during the combustion synthesis of poreless composite materials.

Varma, Arvind↗
DOE OSTI2021

Crystal Structure of an Anisotropic Pyrope Garnet That Contains Two Cubic Phases

The crystal structure of two different samples of pyrope garnet, ideally Mg 3 Al 2 Si 3 O 12 , from South Africa was refined using the Rietveld method, space group Ia3¯d, and monochromatic synchrotron high-resolution powder X-ray diffraction (HRPXRD) data. Sample 1 from Wesselton Mine is a single cubic phase and is optically isotropic. Electron-probe microanalysis (EPMA) provided an average composition {Mg 2.30 Fe 2+ 0.26 Ca 0.42 Mn 2+ 0.02 } Σ3 [Al 1.53 Fe 3+ 0.06 Cr 3+ 0.40 Ti 4+ 0.01 Fe 2+ 0.01 ] Σ2 Si 3 O 12 , which contains a significant amount of Cr cations. The unit-cell parameter (Å) and bond distances (Å) are a = 11.56197(1) Å, average = 2.2985, Al-O = 1.9101(4), and Si-O = 1.6343(3) Å. Sample 2 from De Beers Diamond Mine has an average composition {Mg 2.33 Fe 2+ 0.33 Ca 0.33 Mn 2+ 0.01 } Σ3 [Al 1.73 Fe 3+ 0.12 Cr 3+ 0.06 Ti 4+ 0.05 Fe 2+ 0.05 ] Σ2 Si 3 O 12 and is a fine-scale intergrowth of two cubic phases. The weight percentage, unit-cell parameter (Å), and bond distances (Å) for phase 2a are 62.2(1)%, a = 11.56185(1) Å, average = 2.3006, Al-O = 1.9080(4), Si-O = 1.6334(4) Å. The corresponding values for phase 2b are 37.8(1)%, a = 11.53896(1) Å, average = 2.2954, Al-O = 1.9020(6), Si-O = 1.6334(6) Å. The two cubic phases in sample 2 cause the crystal to be optically anisotropic because of strain induce birefringence. The unit-cell parameter and bond distances for sample 1 are similar to those in phase 2a.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Comparative measurements using different particle size instruments

This paper discusses the measurement and comparison of particle size and velocity measurements in sprays. The general nature of sprays and the development of standard, consistent research sprays are described. The instruments considered in this paper are: pulsed laser photography, holography, television, and cinematography; laser anemometry and interferometry using visibility, peak amplitude, and intensity ratioing; and laser diffraction. Calibration is by graticule, reticle, powders with known size distributions in liquid cells, monosize sprays, and, eventually, standard sprays. Statistical analyses including spatial and temporal long-time averaging as well as high-frequency response time histories with conditional sampling are examined. Previous attempts at comparing instruments, the making of simultaneous or consecutive measurements with similar types and different types of imaging, interferometric, and diffraction instruments are reviewed. A program of calibration and experiments for comparing and assessing different instruments is presented.

Chigier, N.↗
NASA NTRS1986

Ultrasonic characterization of microstructure in powder metal alloy

The ultrasonic wave propagation characteristics were measured for IN-100, a powder metallurgy alloy used for aircraft engine components. This material was as a model system for testing the feasibility of characterizing the microstructure of a variety of inhomogeneous media including powder metals, ceramics, castings and components. The data were obtained for a frequency range from about 2 to 20 MHz and were statistically averaged over numerous volume elements of the samples. Micrographical examination provided size and number distributions for grain and pore structure. The results showed that the predominant source for the ultrasonic attenuation and backscatter was a dense (approx. 100/cubic mm) distribution of small micropores (approx. 10 micron radius). Two samples with different micropore densities were studied in detail to test the feasibility of calculating from observed microstructural parameters the frequency dependence of the microstructural backscatter in the regime for which the wavelength is much larger than the size of the individual scattering centers. Excellent agreement was found between predicted and observed values so as to demonstrate the feasibility of solving the forward problem. The results suggest a way towards the nondestructive detection and characterization of anomalous distributions of micropores when conventional ultrasonic imaging is difficult. The findings are potentially significant toward the application of the early detection of porosity during the materials fabrication process and after manufacturing of potential sites for stress induced void coalescence leading to crack initiation and subsequent failure.

Tittmann, B. R.↗
NASA NTRS1986

Improved consolidation of silicon carbide

Alpha silicon carbide powder was consolidated by both dry and wet methods. Dry pressing in a double acting steel die yielded sintered test bars with an average flexural strength of 235.6 MPa with a critical flaw size of approximately 100 micro m. An aqueous slurry pressing technique produced sintered test bars with an average flexural strength of 440.8 MPa with a critical flaw size of approximately 25 micro m. Image analysis revealed a reduction in both pore area and pore size distribution in the slurry pressed sintered test bars. The improvements in the slurry pressed material properties are discussed in terms of reduced agglomeration and improved particle packing during consolidation.

Freedman, M. R.↗
NASA NTRS1986

Improved consolidation of silicon carbide

Alpha silicon carbide powder was consolidated by both dry and wet methods. Dry pressing in a double acting steel die yielded sintered test bars with an average flexural strength of 235.6 MPa with a critical flaw size of approximately 100 micro m. An aqueous slurry pressing technique produced sintered test bars with an average flexural strength of 440.8 MPa with a critical flaw size of approximately 25 micro m. Image analysis revealed a reduction in both pore area and pore size distribution in the slurry pressed sintered test bars. The improvements in the slurry pressed material properties are discussed in terms of reduced agglomeration and improved particle packing during consolidation.

Freedman, M. R.↗
DOE OSTI2023

Synthesis and characteristics of porous ceramic tubes: a comparison of centrifugal casting and cold isostatic pressing methods

Short porous ceramic tubes in small quantities are needed for membrane-related research and development efforts and can be synthesized by centrifugal casting (CC) or cold isostatic pressing (CIP) methods. Here, this work evaluates the characteristics of porous ceramic tubes prepared by both methods and provides a strategy for selecting the proper method for ceramic tube fabrication, depending on its application. Samarium-doped ceria (SDC) with an average crystallite size of 10 nm was synthesized by a citrate method and used to make porous SDC tubes by the CC and CIP methods under different conditions. Porous SDC tubes were prepared from an aqueous suspension of the SDC powder with polyvinyl alcohol (PVA) using a cylindrical metallic mold, centrifugated at 4000–6000 rpm, followed by sintering in 1200–1500 °C. SDC tubes were also made by the CIP method from the SDC powder placed inside a cylindrical rubber bag followed by isostatic compression at 1379 bar. The pore structure of the SDC tubes was characterized by helium permeation and liquid nitrogen Archimedes method. Due to high compression pressure giving a low porosity green tube, the CIP method with lower sintering temperature produces SDC tubes with much lower porosity and average pore size and similar tortuosity compared to the CC methods. The CIP method should be used to prepare low porosity or dense ceramic tubes, and the CC method should be used for preparing high-porosity ceramic tubes or tubes with pore gradient tube wall.

36 MATERIALS SCIENCE↗
NASA NTRS1978

The effect of microstructure on hydrogen embrittlement of the nickel-base superalloy, Udimet 700

Material from a single heat of cast and wrought Udimet 700 was processed and/or heat treated to produce five material conditions with identical chemical compositions but with distinct microstructural variations, and then evaluated for susceptibility to hydrogen embrittlement. Two prealloyed powder conditions exhibited significantly improved resistance to hydrogen embrittlement, as compared to wrought material. No degradation in notch or smooth tensile strengths occurred, and average ductilities of 25 percent reduction of area were determined for 2 hydrogen evaluation procedures. For the most severe hydrogenation procedure, ductility levels were reduced to 15 percent. These improvements were attributed to cleaner grain boundaries and decreases grain size.

Gray, H. R.↗
NASA NTRS1978

The effect of microstructure on hydrogen embrittlement of the nickel base superalloy, Udimet 700

Material from a single heat of cast and wrought Udimet 700 was processed and/or heat treated to produce five material conditions with identical chemical compositions but with distinct microstructural variations, and then evaluated for susceptibility to hydrogen embrittlement. Two prealloyed powder conditions exhibited significantly improved resistance to hydrogen embrittlement, as compared to wrought material. No degradation in notch or smooth tensile strengths occurred, and average ductilities of 25 percent reduction of area were determined for 2 hydrogen evaluation procedures. For the most severe hydrogenation procedure, ductility levels were reduced to 15 percent. These improvements were attributed to cleaner grain boundaries and decreased grain size.

Gray, H. R.↗
NASA NTRS1973

Cavity temperature and flow characteristics in a gas-core test reactor

A test reactor concept for conducting basic studies on a fissioning uranium plasma and for testing various gas-core reactor concepts is analyzed. The test reactor consists of a conventional fuel-element region surrounding a 61-cm-(2-ft-) diameter cavity region which contains the plasma experiment. The fuel elements provide the neutron flux for the cavity region. The design operating conditions include 60-MW reactor power, 2.7-MW cavity power, 200-atm cavity pressure, and an average uranium plasma temperature of 15,000 K. The analytical results are given for cavity radiant heat transfer, hydrogen transpiration cooling, and uranium wire or powder injection.

Putre, H. A.↗
NASA NTRS1984

The 'North American shale composite' - Its compilation, major and trace element characteristics

North American shale composite (NASC) major element composition and compilation are presented, together with rare earth element (REE) redeterminations obtained by high precision analytical methods. The major element composition of the NASC compares closely with other average shale compositions, and significant portions of the REE and some other trace elements are contained in minor phases. The uneven REE distribution in NASC powder appears to yield the heterogeneity in analyzed aliquants. REE distributions of detrital sediments may to some extent be dependent on their minor mineral assemblages and the sedimentological factors controlling these assemblages.

Gromet, L. P.↗
NASA NTRS1995

Combustion of solid fuel slabs with gaseous oxygen in a hybrid motor analog

Using a high-pressure, two-dimensional hybrid motor, an experimental investigation was conducted on fundamental processes involved in hybrid rocket combustion. HTPB (Hydroxyl-terminated- Polybutadiene) fuel cross linked with diisocyanate was burned with GOX under various operating conditions. Large amplitude pressure oscillations were encountered in earlier test runs. After identifying the source of instability and decoupling the GOX feed line system and combustion chamber, the pressure oscillations were drastically reduced from +/- 20% of the localized mean pressure to an acceptable range of +/- 1.5%. Embedded fine-wire thermocouples indicated that the surface temperature of the burning fuel was around 1000 K depending upon axial locations and operating conditions. Also, except near the leading-edge region, the subsurface thermal wave profiles in the upstream locations arc thicker than those in the downstream locations since the solid-fuel regression rate, in general, increases with distance along the fuel slab. The recovered solid fuel slabs in the laminar portion of the boundary layer exhibited smooth surfaces, indicating the existence of a liquid melt layer on the burning fuel surface in the upstream region. After the transition section, which displayed distinct transverse striations, the surface roughness pattern became quite random and very pronounced in the downstream turbulent boundary-layer region. Both real time X-ray radiography and ultrasonic pulse-echo techniques were used to determine the instantaneous web thicknesses and instantaneous solid-fuel regression rates over certain portions of the fuel slabs. Globally averaged and axially dependent but time-averaged regression rates were also obtained and presented. Several tests were conducted using, simultaneously, one translucent fuel slab and one fuel slab processed with carbon black powder. The addition of carbon black did not affect the measured regression rates or surface temperatures in comparison to the translucent fuel slabs.

Chiaverini, Martin J.↗
NASA NTRS1995

Combustion of solid fuel slabs with gaseous oxygen in a hybrid motor analog

Using a high-pressure, two-dimensional hybrid motor, an experimental investigation was conducted on fundamental processes involved in hybrid rocket combustion. HTPB (Hydroxyl-terminated Polybutadiene) fuel cross-linked with diisocyanate was burned with gaseous oxygen (GOX) under various operating conditions. Large-amplitude pressure oscillations were encountered in earlier test runs. After identifying the source of instability and decoupling the GOX feed-line system and combustion chamber, the pressure oscillations were drastically reduced from plus or minus 20% of the localized mean pressure to an acceptable range of plus or minus 1.5%. Embedded fine--wire thermocouples indicated that the surface temperature of the burning fuel was around 1000 K depending upon axial locations and operating conditions. Also, except near the leading edge region, the subsurface thermal wave profiles in the upstream locations are thicker than those in the downstream locations since the solid-fuel regression rate, in general, increases with distance along the fuel slab. The recovered solid fuel slabs in the laminar portion of the boundary layer exhibited smooth surfaces, indicating the existence of a liquid melt layer on the burning fuel surface in the upstream region. After the transition section, which displayed distinct transverse striations, the surface roughness pattern became quite random and very pronounced in the downstream turbulent boundary-layer region. Both real-time X-ray radiography and ultrasonic pulse echo techniques were used to determine the instantaneous web thicknesses and instantaneous solid-fuel regression rates over certain portions of the fuel slabs. Globally averaged and axially dependent but time-averaged regression rates were also obtained and presented. Several tests were conducted using, simultaneously, one translucent fuel slab and one fuel slab processed with carbon black powder. The addition of carbon black did not affect the measured regression rates or surface temperatures in comparison to the translucent fuel slabs.

Chiaverini, Martin J.↗