Search NASA⌕ Search

SEARCH · Search NASA

Results for “propagation delay”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Identification and measurement of combustion noise from a turbofan engine using correlation and coherence techniques

Fluctuating pressure measurements within the combustor and tailpipe of a turbofan engine are made simultaneously with far field acoustic measurements. The pressure measurements within the engine are accomplished with cooled semi-infinite waveguide probes utilizing conventional condenser microphones as the transducers. The measurements are taken over a broad range of engine operating conditions and for 16 far field microphone positions between 10 deg and 160 deg relative to the engine inlet axis. Correlation and coherence techniques are used to determine the relative phase and amplitude relationships between the internal pressures and far field acoustic pressures. The results indicate that the combustor is a low frequency source region for acoustic propagation through the tailpipe and out to the far field. Specifically, it is found that the relation between source pressure and the resulting sound pressure involves a 180 deg phase shift. The latter result is obtained by Fourier transforming the cross correlation function between the source pressure and acoustic pressure after removing the propagation delay time. Further, it is found that the transfer function between the source pressure and acoustic pressure has a magnitude approximately proportional to frequency squared. These results are shown to be consistent with a model using a modified source term in Lighthill's turbulence stress tensor, wherein the fluctuating Reynolds stresses are replaced with the pressure fluctuations due to fluctuating entropy.

Karchmer, A. M.↗

Sound-producing dune and beach sands

Acoustic and seismic outputs of booming sands and singing (squeaking) sands in response to shearing are investigated, with samples of silent sands studied for controls. A vertical-axis geophone buried at shallow depth and an air microphone were used in the studies. The frequency spectra of the acoustic and seismic responses, propagation delays, comparison of acoustic and seismic traces, grain size and grain surface texture, particle morphology, coherent behavior of grains in assemblages, and relation to prevalent local winds were studied. Mechanisms are still obscure and disputed; slumping and avalanches were induced artificially in some studies. Existence of booming dune phenomena on Mars or on the moon is conjectured.

Lindsay, J. F.↗

Compensated time of flight telescope for spaceborne cosmic ray measurements

A large area time-of-flight telescope has been studied for future application in space-borne cosmic ray experiments. A new compensation technique for propagation delays inside the scintillators has been applied, which is operative in two perpendicular directions. This technique, superior to conventional one-dimensional compensations, allows high rejection probability for upward moving single particles at very short counter distances. Besides mechanical advantages a short counter distance is desirable because it permits a large field of view for the detector. A measurement of light transit times in scintillators is presented and based on it, directionality for shower events is discussed.

Rothermel, H.↗

The binary pulsar - Post-Newtonian timing effects

Certain post-Newtonian effects may be observable in the arrival times of pulses from the binary pulsar PSR 1913+16. Such effects include the gravitational propagation delay and the post-Newtonian corrections to the elliptical binary orbit. Fitting a model of these effects as they are predicted by general relativity to the pulse arrival times permits the estimation of more parameters than are necessary to determine the orbit and masses of the system. This redundancy provides an important check of the assumption that the observed periastron precession rate is entirely due to the effect of general relativity on compact masses.

Epstein, R.↗

System for synchronizing synthesizers of communication systems

Frequency synthesizers at first and second stations that communicate with each other via a transmission link having a constant propagation delay time are started and synchronized by transmitting a tone from the first station to the second station via the link. The frequencies derived from the synthesizer at the second station are received at the first station and are combined with the frequencies derived from the synthesizer at the first station to derive a constant beat frequency as the two synthesizers are stepped.

Enriquez, E. A.↗

Time synchronization via the transit satellite at Mizusawa

Time signals emitted from Transit satellites and received by the NAVICODE type receiver at Mizusawa, Japan are presented. The International Latitude Observatory of Mizusawa and the U. S. Naval Observatory were compared using the time signals. Propagation delays, a receiver delay, effects of relative motion of satellites, and effects of the ionosphere are discussed.

Hara, J.↗

CADAT logic simulation program

CADAT Logic Simulation Program (LOGSIM) checks functional correctness of electronic logic circuit by simulating circuit at logic gate level. LOGSIM also checks propagation delay through logic nets and indicates any timing or "race" problems.

Mitchell, C. L.↗

Satellite time transfer via Tracking and Data Relay Satellite System (TDRSS) and applications

With two geosynchronous relay satellites the tracking and data relay satellite system (TDRSS) can provide nearly worldwide coverage for communication between all near orbiting satellites and the satellite control center at Goddard Space Flight Center. Each future NASA satellite will carry a TDRSS transponder with which the satellite can communicate through a TDRSS to the ground station at White Sands, New Mexico. It is using this system that the ground station master clock time signal can be transmitted to the near Earth orbiting satellite in which a clock may be maintained independently to the accuracy required by the experimenters. The satellite time transfer terminal design concept and the application of the time signal in autonomously operated spacecraft clock are discussed. Some pertinent TDRSS parameters and corrections for the propagation delay measurement as well as the time code used to transfer the time signal are given.

Chi, A. R.↗

Satellite time transfer via TDRSS and applications

The satellite time transfer terminal design concept for the Tracking and Data Relay Satellite System (TDRSS) and the application of the time signal in autonomously operated spacecraft clock are presented. Some pertinent TDRSS parameters and corrections for the propagation delay measurement as well as the time code used to transfer the time signal are given.

Chi, A. R.↗

High speed CMOS/SOS standard cell notebook

The NASA/MSFC high speed CMOS/SOS standard cell family, designed to be compatible with the PR2D (Place, Route in 2-Dimensions) automatic layout program, is described. Standard cell data sheets show the logic diagram, the schematic, the truth table, and propagation delays for each logic cell.

Source record↗

Stabilizing Fiber-Optic Transmission Lines

Voltage-controlled optical phase shifter is key. Optical phase shifter stabilizes propagation delay of fiber-optic transmission line by compensating for temperature and pressure effects. Applicable to phased array antenna systems and very-long-baseline interferometer distribution systems.

Lutes, G. F.↗

The time and frequency comparisons via Loran-C and National TV Network in Yugoslavia

Time comparisons were made between cesium clocks in Yugoslavia and other cesium clocks in the country by the Laboratory of Federal Bureau of Measures and Precious Metals. Regional standard frequency and time signals dissemination is over National TV network by so called active TV system. International comparisons are performed via Loran-C system and by clock transportation. The method of calculation and approximation of the time signal propagation delays is given. Settled comparison results of the cesium clocks via TV network, Loran-C, and by clock transportation are also discussed in this paper.

Markovic, Z. M.↗

Landsat-4 on-board ephemeris determination utilizing the Global Positioning System

The Global Positioning System (GPS) is a worldwide system of navigation data satellites currently being deployed by the United States for land, sea, air and space-borne users. Currently several development satellites have been launched for system evaluation. Eventually the system will include 18 operational satellites. The GPS system utilizes precision clocks to allow users to measure the one-way propagation delay of navigational signals from the satellites, so that users can infer their position by decoding the navigation signal and observing the delay from several satellites. Landsat-4 is the first spacecraft to carry a GPS navigation system into orbit. This paper describes the Landsat-4 GPS experiment, Landsat-4 requirements for ephemeris data and the in-flight performance of the system.

Korenstein, D. A.↗

Precision of vertical position estimates from very long baseline interferometry

It is found that the precision of VLBI measurements of vertical crustal motions is limited by errors in the modeling of the propagation delay through the earth's neutral atmosphere, and by errors in finding the orientation of a fixed crust coordinate system in the VLBI reference frame. The repeatability of baseline length measurements study indicates a vertical position precision of about 8 cm, averaged over 13 sites and 4.5 years of data, while the repeatability of vertical position estimates for a Richmond, FL site is found to yield a precision of about 7 cm for 42 observations made over an 11-month period. An overall precision of 8 cm for a 24-hour VLBI observing session is obtained, and the effects of earth orientation parameter errors is contingent on the distances between the VLBI sites.

Herring, T. A.↗

Persistence of solar wind features

Using data from the plasma and magnetometer experiments on board the Voyagers 1 and 2 during the approach to Jupiter, solar wind persistence is investigated over the period from January 1978 (Voyager 1 passing by Voyager 2) through February 1979. The trajectories of both spacecraft provided a unique opportunity to study the radial evolution and variation of the solar wind over about 3 AU, and to analyze the persistence of solar wind features along the radially increasing separation distance of both Voyagers. Some emphasis is placed on a period of DOY (day of year) 152 through 212, 1978, in which the observed propagation delay time of solar wind signatures between both Voyagers significantly deviates from the expected delay time. A decrease in the correlation coefficient of the corresponding Voyager 1 and 2 data profiles indicates a remarkable change of the solar wind flow. This period in question coincides to a great extent with the interval V of June-July 1978, selected by STIP (Study of Travelling Interplanetary Phenomena).

Rucker, H. O.↗

Relating polarization phase difference of SAR signals to scene properties

This paper examines the statistical behavior of the phase difference Delta-phi between the HH-polarized and VV-polarized backscattered signals recorded by an L-band SAR over an agricultural test site in Illinois. Polarization-phase difference distributions were generated for about 200 agricultural fields for which ground information had been acquired in conjunction with the SAR mission. For the overwhelming majority of cases, the Delta-phi distribution is symmetric and has a single major lobe centered at the mean value of the distribution Delta-phi. Whereas the mean Delta-phi was found to be close to zero degrees for bare soil, cut vegetation, alfalfa, soybeans, and clover, a different pattern was observed for the corn fields; the mean Delta-phi increased with increasing incidence angle Theta = 35 deg. The explanation proposed for this variation is that the corn canopy, most of whose mass is contained in its vertical stalks, acts like a uniaxial crystal characterized by different velocities of propagation for waves with horizontal and vertical polarization. Thus, it is hypothesized that the observed backscatter is contributed by a combination of propagation delay, forward scatter by the soil surface, and specular bistatic reflection by the stalks. Model calculations based on this assumption were found to be in general agreement with the phase observations.

Ulaby, Fawwaz T.↗

Performance analysis of replication ALOHA for fading mobile communications channels

This paper describes an ALOHA random access protocol for fading communications channels. A two-state Markov model is used for the channel error process to account for the channel fading memory. The ALOHA protocol is modified to send multiple contiguous copies of a message at each transmission attempt. Both pure and slotted ALOHA channels are considered. The analysis is applicable to fading environments where the channel memory is short compared to the propagation delay. It is shown that smaller delay may be achieved using replications and, in noisy conditions, can also improve throughput.

Yan, Tsun-Yee↗