Search NASA⌕ Search

SEARCH · Search NASA

Results for “radiative forcing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effective climate sensitivity distributions from a 1D model of global ocean and land temperature trends, 1970–2021

Abstract Current theoretically based Earth system models (ESMs) produce Effective Climate Sensitivities (EffCS) that range over a factor of three, with 80% of those models producing stronger global warming trends for 1970–2021 than do observations. To make a more observationally based estimate of EffCS, a 1D time-dependent forcing-feedback model of temperature departures from energy equilibrium is used to match measured ranges of global-average surface and sub-surface land and ocean temperature trends during 1970–2021. In response to two different radiative forcing scenarios, a full range of three model free parameters are evaluated to produce fits to a range of observed surface temperature trends (± 2σ) from four different land datasets and three ocean datasets, as well as deep-ocean temperature trends and borehole-based trend retrievals over land. Land-derived EffCS are larger than over the ocean, and EffCS is lower using the newer Shared Socioeconomic Pathways (SSP245, 1.86 °C global EffCS, ± 34% range 1.48–2.15 °C) than the older Representative Concentration Pathway forcing (RCP6, 2.49 °C global average EffCS, ± 34% range 2.04–2.87 °C). The strongest dependence of the EffCS results is on the assumed radiative forcing dataset, underscoring the role of radiative forcing uncertainty in determining the sensitivity of the climate system to increasing greenhouse gas concentrations from observations alone. The results are consistent with previous observation-based studies that concluded EffCS during the observational period is on the low end of the range produced by current ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Reduced Complexity Model Intercomparison Project Phase 1: introduction and evaluation of global-mean temperature response

Reduced-complexity climate models (RCMs) are critical in the policy and decision making space, and are directly used within multiple Intergovernmental Panel on Climate Change (IPCC) reports to complement the results of more comprehensive Earth system models. To date, evaluation of RCMs has been limited to a few independent studies. Here we introduce a systematic evaluation of RCMs in the form of the Reduced Complexity Model Intercomparison Project (RCMIP). We expect RCMIP will extend over multiple phases, with Phase 1 being the first. In Phase 1, we focus on the RCMs' global-mean temperature responses, comparing them to observations, exploring the extent to which they emulate more complex models and considering how the relationship between temperature and cumulative emissions of CO2 varies across the RCMs. Our work uses experiments which mirror those found in the Coupled Model Intercomparison Project (CMIP), which focuses on complex Earth system and atmosphere–ocean general circulation models. Using both scenario-based and idealised experiments, we examine RCMs' global-mean temperature response under a range of forcings. We find that the RCMs can all reproduce the approximately 1°C of warming since pre-industrial times, with varying representations of natural variability, volcanic eruptions and aerosols. We also find that RCMs can emulate the global-mean temperature response of CMIP models to within a root-mean-square error of 0.2°C over a range of experiments. Furthermore, we find that, for the Representative Concentration Pathway (RCP) and Shared Socioeconomic Pathway (SSP)-based scenario pairs that share the same IPCC Fifth Assessment Report (AR5)-consistent stratospheric-adjusted radiative forcing, the RCMs indicate higher effective radiative forcings for the SSP-based scenarios and correspondingly higher temperatures when run with the same climate settings. In our idealised setup of RCMs with a climate sensitivity of 3°C, the difference for the ssp585–rcp85 pair by 2100 is around 0.23°C(±0.12°C) due to a difference in effective radiative forcings between the two scenarios. Phase 1 demonstrates the utility of RCMIP's open-source infrastructure, paving the way for further phases of RCMIP to build on the research presented here and deepen our understanding of RCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Uncertainty in Simulating Twentieth Century West African Precipitation Trends: The Role of Anthropogenic Aerosol Emissions

Anthropogenic aerosol emissions from North America and Europe have strong effects on the decadal variability of the West African monsoon (WAM). Anthropogenic aerosol effective radiative forcing is model dependent, but the impact of such uncertainty on the simulation of long-term WAM variability is unknown. We use an ensemble of simulations with HadGEM3-GC3.1 that span the most recent estimates in simulated anthropogenic aerosol effective radiative forcing. We show that uncertainty in anthropogenic aerosol radiative forcing leads to significant uncertainty at simulating multi-decadal trends in West African precipitation. At the large scale, larger forcing leads to a larger decrease in the interhemispheric temperature gradients, in temperature over both the North Atlantic Ocean and northern Sahara. There are also differences in dynamic changes specific to the WAM (locations of the Saharan heat low and African Easterly Jet, of the strength of the West African westerly jet, and of African Easterly Wave activity). We also assess effects on monsoon precipitation characteristics and temperature. We show that larger aerosol forcing results in a decrease of the number of rainy days and of heavy and extreme precipitation events and warm spells. However, simulated changes in onset and demise dates do not appear to be sensitive to the magnitude of aerosol forcing. Our results demonstrate the importance of reducing the uncertainty in anthropogenic aerosol forcing for understanding and predicting multi-decadal variability in the WAM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Impact of biomass burning aerosols on radiation, clouds, and precipitation over the Amazon: relative importance of aerosol–cloud and aerosol–radiation interactions

Biomass burning (BB) aerosols can influence regional and global climate through interactions with radiation, clouds, and precipitation. Here, we investigate the impact of BB aerosols on the energy balance and hydrological cycle over the Amazon Basin during the dry season. We performed simulations with a fully coupled meteorology–chemistry model, the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem), for a range of different BB emission scenarios to explore and characterize nonlinear effects and individual contributions from aerosol–radiation interactions (ARIs) and aerosol–cloud interactions (ACIs). The ARIs of BB aerosols tend to suppress low-level liquid clouds by local warming and increased evaporation and to facilitate the formation of high-level ice clouds by enhancing updrafts and condensation at high altitudes. In contrast, the ACIs of BB aerosol particles tend to enhance the formation and lifetime of low-level liquid clouds by providing more cloud condensation nuclei (CCN) and to suppress the formation of high-level ice clouds by reducing updrafts and condensable water vapor at high altitudes (>8 km). For scenarios representing the lower and upper limits of BB emission estimates for recent years (2002–2016), we obtained total regional BB aerosol radiative forcings of –0.2 and 1.5 W m –2 , respectively, showing that the influence of BB aerosols on the regional energy balance can range from modest cooling to strong warming. We find that ACIs dominate at low BB emission rates and low aerosol optical depth (AOD), leading to an increased cloud liquid water path (LWP) and negative radiative forcing, whereas ARIs dominate at high BB emission rates and high AOD, leading to a reduction of LWP and positive radiative forcing. In all scenarios, BB aerosols led to a decrease in the frequency of occurrence and rate of precipitation, caused primarily by ACI effects at low aerosol loading and by ARI effects at high aerosol loading. The dependence of precipitation reduction on BB aerosol loading is greater in a strong convective regime than under weakly convective conditions. Overall, our results show that ACIs tend to saturate at high aerosol loading, whereas the strength of ARIs continues to increase and plays a more important role in highly polluted episodes and regions. This should hold not only for BB aerosols over the Amazon, but also for other light-absorbing aerosols such as fossil fuel combustion aerosols in industrialized and densely populated areas. The importance of ARIs at high aerosol loading highlights the need for accurately characterizing aerosol optical properties in the investigation of aerosol effects on clouds, precipitation, and climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Constraining aerosol–cloud adjustments by uniting surface observations with a perturbed parameter ensemble

Abstract. Aerosol–cloud interactions (ACIs) are the largest source of uncertainty in inferring the magnitude of future warming consistent with the observational record. The effective radiative forcing due to ACI (ERFaci) is dominated by liquid clouds and is composed of two terms: the change in cloud albedo due to redistributing liquid over a larger number of cloud droplets (Nd) and the change in cloud macrophysical properties due to changes in cloud microphysics. These terms are, respectively, referred to as the radiative forcing due to ACI (RFaci) and aerosol–cloud adjustments. While the magnitude of RFaci is uncertain, its sign is confidently negative and results in a cooling in the historical record. In contrast, the adjustment of cloud liquid water path (LWP) to enhanced Nd and associated radiative forcing is uncertain in sign. Increased LWP in response to increased Nd is consistent with precipitation suppression, while decreased LWP in response to increased Nd is consistent with enhanced evaporation from cloud top. Observational constraints of these processes are poor in part because of causal ambiguity in the relationship between Nd and LWP. To better understand this relationship, precipitation (P), Nd, and LWP surface observations from the Eastern North Atlantic (ENA) atmospheric observatory are combined with the output from a perturbed parameter ensemble (PPE) hosted in the Community Atmosphere Model version 6 (CAM6). This allows for causal interpretation of observed covariability. Observations of precipitation and cloud from ENA constrain the range of possible LWP aerosol–cloud adjustments relative to the prior from the PPE by 15 %, resulting in a global value that is confidently positive (a historical cooling) ranging from 2.1 to 6.9 g m−2. It is found that observed covariability between Nd and LWP is dominated by coalescence scavenging and that this observed covariability is not strongly related to aerosol–cloud adjustments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Why the Forcing from Carbon Dioxide Scales as the Logarithm of Its Concentration

Abstract The radiative forcing from carbon dioxide is approximately logarithmic in its concentration, producing about 4 W m −2 of global-mean forcing for each doubling. Although these are basic facts of climate science, competing explanations for them have been given in the literature. Here, the reasons for the logarithmic forcing of carbon dioxide are explored in detail and a simplified model for the forcing is constructed. An essential component is the particular distribution of absorption coefficients within the 15- μ m band of carbon dioxide. An alternative explanation, which does not depend on the spectrum of carbon dioxide but instead hinges on the tropospheric lapse rate, is shown to be neither necessary nor sufficient to explain the logarithmic forcing of carbon dioxide and to be generally inapplicable to well-mixed greenhouse gases in Earth’s atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Constraining the Twomey effect from satellite observations: issues and perspectives

Abstract. The Twomey effect describes the radiative forcing associated with a change in cloud albedo due to an increase in anthropogenic aerosol emissions. It is driven by the perturbation in cloud droplet number concentration (ΔNd, ant) in liquid-water clouds and is currently understood to exert a cooling effect on climate. The Twomey effect is the key driver in the effective radiative forcing due to aerosol–cloud interactions, but rapid adjustments also contribute. These adjustments are essentially the responses of cloud fraction and liquid water path to ΔNd, ant and thus scale approximately with it. While the fundamental physics of the influence of added aerosol particles on the droplet concentration (Nd) is well described by established theory at the particle scale (micrometres), how this relationship is expressed at the large-scale (hundreds of kilometres) perturbation, ΔNd, ant, remains uncertain. The discrepancy between process understanding at particle scale and insufficient quantification at the climate-relevant large scale is caused by co-variability of aerosol particles and updraught velocity and by droplet sink processes. These operate at scales on the order of tens of metres at which only localised observations are available and at which no approach yet exists to quantify the anthropogenic perturbation. Different atmospheric models suggest diverse magnitudes of the Twomey effect even when applying the same anthropogenic aerosol emission perturbation. Thus, observational data are needed to quantify and constrain the Twomey effect. At the global scale, this means satellite data. There are four key uncertainties in determining ΔNd, ant, namely the quantification of (i) the cloud-active aerosol – the cloud condensation nuclei (CCN) concentrations at or above cloud base, (ii) Nd, (iii) the statistical approach for inferring the sensitivity of Nd to aerosol particles from the satellite data and (iv) uncertainty in the anthropogenic perturbation to CCN concentrations, which is not easily accessible from observational data. This review discusses deficiencies of current approaches for the different aspects of the problem and proposes several ways forward: in terms of CCN, retrievals of optical quantities such as aerosol optical depth suffer from a lack of vertical resolution, size and hygroscopicity information, non-direct relation to the concentration of aerosols, difficulty to quantify it within or below clouds, and the problem of insufficient sensitivity at low concentrations, in addition to retrieval errors. A future path forward can include utilising co-located polarimeter and lidar instruments, ideally including high-spectral-resolution lidar capability at two wavelengths to maximise vertically resolved size distribution information content. In terms of Nd, a key problem is the lack of operational retrievals of this quantity and the inaccuracy of the retrieval especially in broken-cloud regimes. As for the Nd-to-CCN sensitivity, key issues are the updraught distributions and the role of Nd sink processes, for which empirical assessments for specific cloud regimes are currently the best solutions. These considerations point to the conclusion that past studies using existing approaches have likely underestimated the true sensitivity and, thus, the radiative forcing due to the Twomey effect.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Distinct responses of Asian summer monsoon to black carbon aerosols and greenhouse gases

Black carbon (BC) aerosols emitted from natural and anthropogenic sources induce positive radiative forcing and global warming, which in turn significantly affect the Asian summer monsoon (ASM). However, many aspects of the BC effect on the ASM remain elusive and largely inconsistent among previous studies, which is strongly dependent on different low-level thermal feedbacks over the Asian continent and the surrounding ocean. This study examines the response of the ASM to BC forcing in comparison with the effect of doubled greenhouse gases (GHGs) by analyzing the Precipitation Driver Response Model Intercomparison Project (PDRMIP) simulations under an extremely high BC level (10 times modern global BC emissions or concentrations, labeled BC×10) from nine global climate models (GCMs). The results show that although BC and GHGs both enhance the ASM precipitation minus evaporation (P–E; a 13.6 % increase for BC forcing and 12.1 % for GHGs from the nine-model ensemble, respectively), there exists a much larger uncertainty in changes in ASM P–E induced by BC than by GHGs. The summer P–E is increased by 7.7 % to 15.3 % due to these two forcings over three subregions, including East Asian, South Asian and western North Pacific monsoon regions. Further analysis of moisture budget reveals distinct mechanisms controlling the increases in ASM P–E induced by BC and GHGs. The change in ASM P–E by BC is dominated by the dynamic effect due to the enhanced large-scale monsoon circulation, whereas the GHG-induced change is dominated by the thermodynamic effect through increasing atmospheric water vapor. Radiative forcing of BC significantly increases the upper-level atmospheric temperature over the Asian region to enhance the upper-level meridional land–sea thermal gradient (MLOTG), resulting in a northward shift of the upper-level subtropical westerly jet and an enhancement of the low-level monsoon circulation, whereas radiative forcing of GHGs significantly increases the tropical upper-level temperature, which reduces the upper-level MLOTG and suppresses the low-level monsoonal circulation. Hence, our results indicate a different mechanism of BC climate effects under the extremely high BC level: that BC forcing significantly enhances the upper-level atmospheric temperature over the Asian region, determining ASM changes, instead of low-level thermal feedbacks as indicated by previous studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Distinct responses of Asian summer monsoon to black carbon aerosols and greenhouse gases

Black carbon (BC) aerosols emitted from natural and anthropogenic sources induce positive radiative forcing and global warming, which in turn significantly affect the Asian summer monsoon (ASM). However, many aspects of the BC effect on ASM remain elusive and largely inconsistent among previous studies, which is strongly dependent on different low-level thermal feedbacks over the Asian continent and the surrounding ocean. This study examines the response of ASM to BC forcing in comparison with the effect of doubled greenhouse gases (GHGs) by analyzing the Precipitation Driver Response Model Intercomparison Project (PDRMIP) simulations under an extreme high BC level (10 times modern global BC emissions or concentrations, labeled by BC $\times$ 10) from nine global climate models (GCMs). The results show that although BC and GHGs both enhance the ASM precipitation minus evaporation (P–E) (a 13.6 % increase for BC forcing and 12.1 % for GHGs from the nine-model ensemble, respectively), there exists a much larger uncertainty in changes in ASM P–E induced by BC than by GHGs. The summer P–E is increased by 7.7 % to 15.3 % due to these two forcings over three sub-regions including East Asian, South Asian, and western North Pacific monsoon regions. Further analysis of moisture budget reveals distinct mechanisms controlling the increases in ASM P–E induced by BC and GHGs. The change in ASM P–E by BC is dominated by the dynamic effect due to the enhanced large-scale monsoon circulation, whereas the GHG-induced change is dominated by the thermodynamic effect through increasing atmospheric water vapor. Radiative forcing of BC significantly increases the upper-level atmospheric temperature over the Asian region to enhance the upper-level meridional land-sea thermal gradient (MLOTG), resulting in a northward shift of the upper-level subtropical westerly jet and an enhancement of the low-level monsoon circulation; whereas radiative forcing of GHGs significantly increases the tropical upper-level temperature, which reduces the upper-level MLOTG and suppresses the low-level monsoonal circulation. Hence, our results indicate a different mechanism of BC climate effects under the extreme high BC level, that BC forcing significantly enhances the upper-level atmospheric temperature over the Asian region, determining ASM changes, instead of low-level thermal feedbacks as indicated by previous studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A global study of hygroscopicity-driven light-scattering enhancement in the context of other in situ aerosol optical properties

The scattering and backscattering enhancement factors (ƒ(RH) and ƒ b (RH)) describe how aerosol particle light scattering and backscattering, respectively, change with relative humidity (RH). They are important parameters in estimating direct aerosol radiative forcing (DARF). In this study we use the dataset presented in Burgos et al. (2019) that compiles ƒ(RH) and ƒ b (RH) measurements at three wavelengths (i.e., 450, 550 and 700 nm) performed with tandem nephelometer systems at multiple sites around the world. We present an overview of ƒ(RH) and ƒ b (RH) based on both long-term and campaign observations from 23 sites representing a range of aerosol types. The scattering enhancement shows a strong variability from site to site, with no clear pattern with respect to the total scattering coefficient. In general, higher ƒ(RH) is observed at Arctic and marine sites, while lower values are found at urban and desert sites, although a consistent pattern as a function of site type is not observed. The backscattering enhancement ƒ b (RH) is consistently lower than ƒ(RH) at all sites, with the difference between ƒ(RH) and ƒ b (RH) increasing for aerosol with higher ƒ(RH). This is consistent with Mie theory, which predicts higher enhancement of the light scattering in the forward than in the backward direction as the particle takes up water. Our results show that the scattering enhancement is higher for PM 1 than PM 10 at most sites, which is also supported by theory due to the change in scattering efficiency with the size parameter that relates particle size and the wavelength of incident light. At marine-influenced sites this difference is enhanced when coarse particles (likely sea salt) predominate. For most sites, ƒ(RH) is observed to increase with increasing wavelength, except at sites with a known dust influence where the spectral dependence of ƒ(RH) is found to be low or even exhibit the opposite pattern. The impact of RH on aerosol properties used to calculate radiative forcing (e.g., single-scattering albedo, ω 0 , and backscattered fraction, b) is evaluated. The single-scattering albedo generally increases with RH, while b decreases. The net effect of aerosol hygroscopicity on radiative forcing efficiency (RFE) is an increase in the absolute forcing effect (negative sign) by a factor of up to 4 at RH = 90 % compared to dry conditions (RH < 40 %). Because of the scarcity of scattering enhancement measurements, an attempt was made to use other more commonly available aerosol parameters (i.e., ω 0 and scattering Ångström exponent, α sp ) to parameterize ƒ(RH). The majority of sites (75 %) showed a consistent trend with ω 0 (higher ƒ(RH = 85 %) for higher ω 0 ), while no clear pattern was observed between ƒ(RH = 85 %) and αsp. This suggests that aerosol ω 0 is more promising than α sp as a surrogate for the scattering enhancement factor, although neither parameter is ideal. Nonetheless, the qualitative relationship observed between ω 0 and ƒ(RH) could serve as a constraint on global model simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Explaining Forcing Efficacy With Pattern Effect and State Dependence

The magnitude of global surface temperature change in response to unit radiative forcing depends on the type and magnitude of forcing agent—a concept known as a “forcing efficacy.” However, the mechanisms behind the forcing efficacy are still unclear. In this study, we perform a set of simulations using CESM1 to calculate the efficacy of 10 different forcing agents defined in terms of fixed-SST effective radiative forcing, and then use a Green's function approach to show that each forcing efficacy can be largely understood in terms of the radiative feedbacks associated with the different surface temperature patterns induced by the forcing agents (a pattern effect). We also quantify how the state dependence of feedbacks on global mean surface temperature anomalies impacts forcing efficacies. The results show that the forcing efficacy can be well reconstructed with a combination of pattern effect and state dependence.

58 GEOSCIENCES↗
DOE OSTI2023

Why Does E3SMv2 Have High Aerosol Sensitivity?

The Energy Exascale Earth System Model’s (E3SM) high aerosol effective radiative forcing (ERF) is evaluated against results from the Radiative-Forcing-Model-Intercomparison-Project (RFMIP). ERF is decomposed into aerosol susceptibility and aerosol optical depth change (Δτ). E3SM’s Δτ is found to be larger than that of any RFMIP model – particularly over the ocean - while its radiative response to anthropogenic aerosol change is unremarkable. Sensitivity simulations which reduce E3SM’s unrealistically large Δτ are effective at damping E3SM’s unusually strong ERF and improve agreement with the historical temperature record but have little impact on present-day climatology. These results suggest that reducing anthropogenic aerosol concentrations is an essential ingredient in any plan to fix E3SM’s high ERF.

58 GEOSCIENCES↗
DOE OSTI2021

Biased Estimates of Equilibrium Climate Sensitivity and Transient Climate Response Derived From Historical CMIP6 Simulations

Abstract This study assesses the effective climate sensitivity (EffCS) and transient climate response (TCR) derived from global energy budget constraints within historical simulations of eight CMIP6 global climate models (GCMs). These calculations are enabled by use of the Radiative Forcing Model Intercomparison Project (RFMIP) simulations, which permit accurate quantification of the radiative forcing. Long‐term historical energy budget constraints generally underestimate EffCS from CO 2 quadrupling and TCR from CO 2 ramping, owing to changes in radiative feedbacks and changes in ocean heat uptake efficiency. Atmospheric GCMs forced by observed warming patterns produce lower values of EffCS that are more in line with those inferred from observed historical energy budget changes. The differences in the EffCS estimates from historical energy budget constraints of models and observations are traced to discrepancies between modeled and observed historical surface warming patterns.

Dong, Yue↗
DOE OSTI2024

Aerosol-Cloud Interactions From Aviation Soot Emissions

Current models estimate global aviation contributes approximately 5% to the total anthropogenic climate forcing, with aerosol-cloud interactions having the greatest effect. However, radiative forcing estimates from aviation aerosol-cloud interactions remain undetermined. There is an expected significant increase in aircraft emissions with aviation demand expected to rise by over 4% per year. Soot may play an important role in the ice nucleation of aircraft-induced cirrus formation due to a high emission rate, but the ice nucleating properties are poorly constrained. Understanding the microphysical processes leading to atmospheric ice crystal formation is crucial for the reliable parameterization of aerosol-cloud interactions in climate models due to their impact on precipitation and cloud radiative properties. Ice nucleation of aircraft-emitted soot is potentially affected by particle morphology with condensation of supercooled water occurring in pores followed by ice nucleation. However, soot has heterogeneous properties and undergoes atmospheric aging and oxidation that could change surface properties and contribute to complex ice nucleation processes. Further, this review synthesizes current knowledge of ice nucleation catalyzed by aviation in the cirrus regime and its effects on global radiative forcing. Further research is required to determine the ice nucleation and microphysical processes of cirrus cloud formation from aviation emissions in both controlled laboratory and field investigations to inform models for more accurate climate predictions and to provide efficient mitigation strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhanced Convective Microphysics Scheme and Its Impacts on Mean Climate in E3SM

Abstract To improve the representation of microphysical processes in convective clouds and their interaction with aerosol and stratiform clouds, a two‐moment convective microphysics parameterization (CMP) scheme developed by Song and Zhang (2011, https://doi.org/10.1029/2010jd014833 ) is upgraded and implemented in E3SM. The new developments include: (a) implementing a parameterization for graupel to enhance the representation of ice‐phase microphysical processes; (b) representing the impact of spatial inhomogeneity of cloud droplets in cumulus ensembles on autoconversion and accretion processes to improve the representation of warm‐rain microphysical processes; (c) implementing a comprehensive Bergeron process parameterization to better represent mixed‐phase microphysical processes; and (d) representing the interactions between ice‐phase microphysics and cloud thermodynamics. Simulations show that the cloud microphysical properties simulated by the CMP are generally in good agreement with observations. It reasonably simulates the changes in droplets effective radius related to precipitation formation in convective clouds, as identified from satellite observations. It also successfully simulates the contrast in these processes between maritime and continental clouds, demonstrating its capability to simulate the impact of aerosols on convection. Analyses of the impact of CMP on climate mean state simulation demonstrate that the CMP slightly improves the simulations of precipitation, cloud macrophysical properties, longwave cloud radiative forcing, zonal wind, and temperature. However, a degradation in shortwave cloud radiative forcing occurs.

GCM↗
DOE OSTI2020

Attribution of NAO Predictive Skill Beyond 2 Weeks in Boreal Winter

Weeks 3–6 averaged winter North Atlantic Oscillation (NAO) predictive skill in a state-of-the-art coupled climate prediction system is attributed to two principle sources: upper and lower boundary conditions linked to the stratosphere and El Niño-Southern Oscillation (ENSO), respectively. A 20-member ensemble of 45-day reforecasts over 1999–2015 is utilized, together with uninitialized simulations with the atmospheric component of the prediction system forced with observed radiative forcing and lower boundary conditions. NAO forecast skill for lead times out to 6 weeks is higher following extreme stratospheric polar vortex conditions (weak and strong vortex events) compared to neutral states. Enhanced weeks 3-6 NAO predictive skill for weak vortex events results primarily from stratospheric downward coupling to the troposphere, while enhanced skill for strong vortex events can be partly attributed to lower boundary forcing related to the ENSO phenomenon. Implications for forecast system development and improvement are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Global source apportionment of aerosols into major emission regions and sectors over 1850–2017

Anthropogenic emissions of aerosols and precursor gases have changed significantly in the past few decades around the world. In this study, the Explicit Aerosol Source Tagging (EAST) system is merged into the Energy Exascale Earth System Model version 1 (E3SMv1) to quantify the variations in anthropogenic aerosol concentrations, source contributions, and their subsequent radiative impact in four major emission regions across the globe during 1850–1980, 1980–2010, and 2010–2017. In North America and Europe, changes in anthropogenic PM 2.5 were mainly caused by changes in emissions from local energy and industrial sectors. The local industrial sector caused the largest increase in PM 2.5 in East Asia during 1980–2010 and decrease during 2010–2017. In South Asia, the increase in energy-related emissions dominated the rise in PM 2.5 levels during 1980–2017. During 1850–1980, the increases in emissions from North America contributed to the increase in the European PM 2.5 burden by 1.7 mg m -2 and the sources from the Europe were also responsible for the PM 2.5 burden increase in East Asia and South Asia by about 1.0 mg m -2 . During 1980–2010, East Asia contributed to an increase of 0.4–0.6 mg m -2 in the PM 2.5 burden in North America and Europe, while South Asia contributed about 0.3 mg m -2 . During 2010–2017, the contributions from East Asia to the PM 2.5 burdens in the North America, Europe, and South Asia declined by 0.3–0.6 mg m -2 due to the clean air actions in China, while the contributions from South Asia still increased due to the continuous increase in emissions in South Asia. The historical changes in aerosols had an impact on effective radiative forcing through aerosol–radiation interactions (ERF ari ). During 1980–2010, a decline in North American aerosols resulted in a positive ERF ari change (warming effect) in Europe and a decline in aerosols in Europe caused a warming effect in Russia and northern China. The changes in ERF ari from the increase and decrease in aerosols in China during 1980–2010 and 2010–2017, respectively, are comparable in magnitude. The continuous aerosol increases in South Asia from 1980 to 2017 resulted in negative ERF ari (cooling) changes in South Asia, Southeast Asia, and southern China.

54 ENVIRONMENTAL SCIENCES↗