Search NASA⌕ Search

SEARCH · Search NASA

Results for “reconfigurable design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Fast photodiode arrays for high frequency fluctuation measurements of reconnecting flux ropes

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1–5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented.

Instruments & Instrumentation↗
DOE OSTI2022

DRIPS: Dynamic Rebalancing of Pipelined Streaming Applications on CGRAs

Coarse-grained reconfigurable arrays (CGRAs) provide higher flexibility than application-specific integrated circuits (ASICs) and higher efficiency than fine-grained reconfigurable devices such as Field Programmable Gate Arrays (FPGAs). However, CGRAs are generally designed to support offloading of a single kernel. While their design, based on communicating functional units, appears to naturally suit data streaming applications composed of multiple cooperating kernels, current approaches only statically partition the resources across application kernels. However, emerging streaming applications at the edge (scientific instruments, sensor networks, network processing) perform much more than digital signal processing and often are data and input dependent. This leads to extremely variable kernel execution times, severely impacting the throughput of the entire pipeline if resources are only statically allocated. Therefore, in this paper, we propose DRIPS — a coarse-grained, dynamically, and partially reconfigurable array for data-dependent streaming applications. We present a unified compiler framework to facilitate the mapping of a given streaming application onto the DRIPS CGRA architecture. The experimental results show that DRIPS achieves an average throughput improvement of 1.46$\times$ across a set of representative applications over a statically partitioned solution. The additional area overhead to enable dynamic rebalancing consumes 16.34% of the entire area for a 5x5 CGRA prototype.

Tan, Cheng↗
DOE OSTI2024

Ferroelectric FET-based context-switching FPGA enabling dynamic reconfiguration for adaptive deep learning machines

Field programmable gate array (FPGA) is widely used in the acceleration of deep learning applications because of its reconfigurability, flexibility, and fast time-to-market. However, conventional FPGA suffers from the trade-off between chip area and reconfiguration latency, making efficient FPGA accelerations that require switching between multiple configurations still elusive. Here, we propose a ferroelectric field-effect transistor (FeFET)–based context-switching FPGA supporting dynamic reconfiguration to break this trade-off, enabling loading of arbitrary configuration without interrupting the active configuration execution. Leveraging the intrinsic structure and nonvolatility of FeFETs, compact FPGA primitives are proposed and experimentally verified. The evaluation results show our design shows a 63.0%/74.7% reduction in a look-up table (LUT)/connection block (CB) area and 82.7%/53.6% reduction in CB/switch box power consumption with a minimal penalty in the critical path delay (9.6%). Besides, our design yields significant time savings by 78.7 and 20.3% on average for context-switching and dynamic reconfiguration applications, respectively.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Ionic-content-driven restructuring of spirobisindane ionene networks: implications for mechanics, self-healing, and gas transport

Polymers of intrinsic microporosity (PIMs) offer exceptional gas permeability but remain brittle and susceptible to physical aging, limiting their durability in separation applications. Here, we introduce a reconfigurable microporous polymer network that uniquely integrates permanent PIM microporosity with autonomous, intrinsic self-healing driven by imidazolium-based ionic motifs. Spirobisindane units generate the intrinsic free-volume architecture, while an imidazolium-containing polyamide ionene supplies dynamic ionic and hydrogen-bonding interactions that reorganize under mild activation. Incorporation of imidazolium-based ionic liquids further tunes cohesion, mobility, and densification, enabling the network to relax, re-associate, and retain microporosity without structural collapse. Through a comprehensive multiscale approach combining spectroscopy, scattering, thermal and mechanical characterization with all-atom molecular dynamics and density functional theory calculations, we elucidate how ionic content, as a single control parameter that reshapes free-volume distributions, modulates local coordination environments, and governs relaxation and healing kinetics. At intermediate ionic loadings, the networks achieve rapid, repeatable self-healing while maintaining CO$_2$ selectivity, demonstrating an optimal balance between segmental mobility and structural integrity. By establishing how hierarchical ionic interactions couple structure, dynamics, and transport in microporous ionene networks, this work provides generalizable design rules for adaptive soft-matter systems that require simultaneous mechanical resilience, reconfigurability, and selective gas transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fail-Safe Logic Design Strategies Within Modern FPGA Architectures

Fail-safe computing refers to computing systems that revert to a non-operational safe state when a fault occurs. In this paper, we investigate a circuit level technique as mitigation for single event upsets (SEUs) and fault injection attacks on field programmable gate arrays (FPGAs), and analyze the effectiveness of the technique as a fail-safe monitor for an encryption algorithm. The propagation of fault effects through FPGA primitives including lookup tables (LUTs) and programmable interconnect points (PIPs) is assessed within an FPGA architecture created using an open source tool, and validated using fault injection experiments on an FPGA. The analysis reveals additional vulnerabilities exist within reconfigurable architectures over those in equivalent fail-safe application specific integrated circuit (ASIC), thus requiring a more elaborate network of redundant circuits and checking logic. The configuration memory bits (CMBs), which configure routing and designate logic functions within the LUTs of the FPGA, add complexity to fail-safe design strategies by introducing additional fault conditions and fault propagation paths. A resource-efficient fail-safe circuit design technique called DEsign for Fail-safe in reCONfigurable systems (DEFCON) is proposed. The benefits and limitations associated with DEFCON are described in the context of fault injection experiments carried out as simulations and in FPGA hardware.

Bhakta, Priya A. [Univ. of New Mexico, Albuquerque↗
DOE OSTI2024

Repairable and Reconfigurable Structured Liquid Circuits

The advance of printed electronics is significantly bolstered by the development of liquid-state electronics that overcome the inherent limitations in flexibility and reconfigurability of solid-state electronics. By integrating the biocompatibility and conductivity of sulfonated polyaniline (S-PANI) and phytic acid (PA) with the reconfigurability of structured liquids, highly conductive all-liquid threads are developed. The dense packing and overlap of PA/S-PANI complexes at an oil/water interface promotes in-plane electron transport, and standard four-point probe measurements of PA/S-PANI interfacial assemblies demonstrate enhanced electrical properties. Notably, the rapid jetting of the ink phase into the matrix phase allows for liquid threads to be printed, enabling the fabrication of large-scale, conductive pathways between two electrodes and liquid circuits. Upon mechanical cleavage of the liquid wires, circuits can be broken, but will easily self-repair using an electric field, making this motif useful in the design of switches as well as restoring conductive pathways in series or in parallel. In conclusion, the demonstrated flexibility and reconfigurability these PA/S-PANI wires possess hold significant promise for their practical use in the design of flexible and adaptive bioelectronics that can be repaired on demand, signifying a transformative step in the evolution of liquid electronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Space-Time Quantum Metasurfaces

Metasurfaces have recently entered the realm of quantum photonics, enabling manipulation of quantum light using a compact nanophotonic platform. Realizing the full potential of metasurfaces at the deepest quantum level requires the ability to tune coherent light-matter interactions continuously in space and time. Here, we introduce the concept of space-time quantum metasurfaces for arbitrary control of the spectral, spatial, and spin properties of nonclassical light using a compact photonic platform. We show that space-time quantum metasurfaces allow on-demand tailoring of entanglement among all degrees of freedom of a single photon. We also show that spatiotemporal modulation induces asymmetry at the fundamental level of quantum fluctuations, resulting in the generation of steered and vortex photon pairs out of vacuum. Space-time quantum metasurfaces have the potential to enable novel photonic functionalities, such as encoding quantum information into high-dimensional color qudits using designer modulation protocols, sculpting multispectral and multispatial modes in spontaneous emission, and generating reconfigurable hyperentanglement for high-capacity quantum communications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Resilient Hydrogels from the Nanoscale to the Macroscale

Biological systems illustrate how a material composed of fragile molecular components can collectively be highly resilient. While the average protein, cell, or even tissue may not last more than a few weeks, many animals and plants live for more than a century. Continual component regeneration and multiple systems to resist mechanical and chemical damage together make this longetivity possible. This project sought to develop biomimetic methods to enable a specific type of material, a hydrogel, to resist damage across multiple scales using distinct, modular damage protection mechanisms. Because hydrogels share many features with biological tissues, they are an ideal substrate for exploring biomimetic strategies for designing resilience and self-repair. We specifically focused in this study on DNA-crosslinked hydrogels, which contain DNA strands that can serve as material to link it together or to control its current state or properties. We investigated how new tools from dynamic DNA nanotechnology could make it possible to actively recover from damage by continually growing and forming a materials shape, or by identifying damage and directing an adaptive response to that damage involving chemical synthesis to reconstruct a structure. We developed embedded molecular sensors able to detect and strain of the gel before damage occurred and react to counteract damage. We also developed methods to continually create shapes and patterns using chemical processes that will allow those patterns to reform when they are damaged. The ability to design resilient materials capable of self-repair has important implications for materials engineering. Instead of designing a material to withstand the worst stresses it may encounter, we could instead design a material to survive under average conditions, but self-repair or reconfigure to resist impending damage. Resilient, self-repairing hydrogels will also have diverse applications such as sensors or actuators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transient Terahertz Oscillations During Photoinduced Polarization Topology Reconfiguration in Ferroelectric Superlattices

Terahertz resonances embedded in crystalline heterostructures could close a spectral gap between conventional electronics and photonics while opening new windows on non-equilibrium lattice dynamics. We show that femtosecond optical screening of the depolarization field in epitaxial PbTiO3/SrTiO3 superlattices launches a collective polar mode that oscillates near 1 THz and coherently spans the entire mini-Brillouin zone. Wave-vector-resolved pump–probe X-ray diffraction resolves a nearly dispersion-less oscillation at 0.87 THz and 0.94 THz at the zone boundary and zone center, respectively, persisting for ~2.5 ps, corresponding to a weakly damped resonance. Dynamical phase-field simulations reveal the origin of the mode to mesoscopic rotation of closure-domain textures during the photo-excited transition from an unscreened to a screened electrostatic state. Varying the PbTiO3 and SrTiO3 ratio tunes the mode frequency continuously from 0.9 to 1.4 THz, providing a quantitative design rule for frequency-selectable THz oscillators in ferroelectric heterostructures. By coupling nanoscale polarization reconfiguration to long-wavelength coherent dynamics, this work establishes depolarization-field engineering to topology-driven THz functionality and expanding the landscape of collective lattice dynamics.

Sri Gyan, Deepankar [Univ. of Wisconsin, Madison, ↗
DOE OSTI2025

Mechanisms enabling reconfigurability and long-term retention in vanadium oxide electrochemical memory

Phase coexistence in nanoscale electrochemical random-access memory (ECRAM) has recently been demonstrated to enable both information storage and extraordinary reconfigurability. These proof-of-principle demonstrations have left the mechanistic details of such a process unresolved. Particularly, the mechanisms that stabilize the multiple phases, and the underlying processes behind sustained memory retention, remain unclear, and are necessary to design such devices. Here we report microscale ECRAM devices composed of V⁢O𝑥, which enables us to directly probe the active region in an operando fashion using optical techniques. Using Raman mapping, we show the phase coexistence driven by the electrochemical injection of O vacancies to be spatially uniform (i.e., with no filaments). The stability was observed to be unusually long, with 1% loss over 14 years in ambient conditions. First-principles calculations of the oxygen vacancy formation energies in V⁢O 𝑥 further support the thermodynamic coexistence of multiple V⁢O 𝑥 phases and clarify the origin of the observed long-term retention in the ECRAM devices. Further, we demonstrate single devices that can be voltage programmed to exhibit synaptic, neuronal, and reconfigurable logic gate functionalities. Furthermore, we not only uncover the phase coexistence mechanism that may help device design, but also demonstrate the circuit-level applications of reconfigurability.

Electrical conductivity↗
DOE OSTI2023

Secondary Frequency Control for Reconfigurable Interconnecting Microgrids

Microgrids and microgrid technologies offer an operations and control framework for realizing the needed aggregation of a growing share of distributed energy resources. As the number of microgrids increases, so will the incentive to interconnect them, leading to a combinatorial growth of potential operating states. At the same time, their growing complexity nudges interconnected microgrids conceptually closer to balancing authorities in the bulk power system. This paper focuses on secondary frequency control and leverages the conceptual similarity between balancing authorities and interconnected microgrids to adopt an automatic generation control design with some adaptations. Frequency control and restoration is demonstrated via several use-cases with switching and reconfiguration events.

Schweitzer, Eran↗
DOE OSTI2026

Universal Injector at LERF – Baseline Design

A new electron injector complex has been proposed within the Low Energy Recirculating Facility (LERF) vault, which would serve both the 22 GeV CEBAF and the positron programs, while being compatible with the electron source required to produce positrons for Ce+BAF. The baseline design of a 3-pass recirculator features a main linac configured with three cryomodules, five isochronous arcs and three straight sections, allowing electron beam acceleration up to 650 MeV. The injector offers the flexibility to extract 1-pass and 2-pass energy electrons, as needed for positron production, with final reconfiguration to a 3-pass 650 MeV injector for 22 GeV CEBAF. This paper provides an overview of the baseline design of the Universal injector complex, including the 8 MeV injector and the recirculator. A comprehensive suite of beam dynamics studies to validate our design is being launched, starting with start-to-end tracking with Elegant followed by the orbit correction and error mitigation.

Bogacz, A. [Thomas Jefferson National Accelerator ↗
DOE OSTI2021

Spontaneous Reorganization of DNA-Based Polymers in Higher Ordered Structures Fueled by RNA

We demonstrate a strategy that allows for the spontaneous reconfiguration of self-assembled DNA polymers exploiting RNA as chemical fuel. To do this, we have rationally designed orthogonally addressable DNA building blocks that can be transiently deactivated by RNA fuels and subtracted temporarily from participation in the self-assembly process. Through a fine modulation of the rate at which the building blocks are reactivated we can carefully control the final composition of the polymer and convert a disordered polymer in a higher order polymer, which is disfavored from a thermodynamic point of view. We measure the dynamic reconfiguration via fluorescent signals and confocal microscopy, and we derive a kinetic model that captures the experimental results. Our approach suggests a novel route toward the development of biomolecular materials in which engineered chemical reactions support the autonomous spatial reorganization of multiple components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Auxetic Two‐Dimensional Nanostructures from DNA**

Abstract Architectured materials exhibit negative Poisson's ratios and enhanced mechanical properties compared with regular materials. Their auxetic behaviors emerge from periodic cellular structures regardless of the materials used. The majority of such metamaterials are constructed by top‐down approaches and macroscopic with unit cells of microns or larger. There are also molecular auxetics including natural crystals which are not designable. There is a gap from few nanometers to microns, which may be filled by biomolecular self‐assembly. Herein, we demonstrate two‐dimensional auxetic nanostructures using DNA origami. Structural reconfigurations are performed by two‐step DNA reactions and complemented by mechanical deformation studies using molecular dynamics simulations. We find that the auxetic behaviors are mostly defined by geometrical designs, yet the properties of the materials also play an important role. From elasticity theory, we introduce design principles for auxetic DNA metamaterials.

Li, Ruixin↗
DOE OSTI2020

CQNN: a CGRA-based QNN Framework

We propose a novel Coarse-Grained Reconfigurable Architecture-based (CGRA) QNN acceleration framework, CQNN. CQNN has a large number of basic components for binary functions. By programming CQNN at runtime according to the target QNN models, these basic components are integrated efficiently to support QNN functions with any data-width and hyper-parameter requirements and CQNN is reconfigured to have the optimal architecture for the target models. The framework includes compiler, architecture design, simulator and RTL generator. Experimental results show CQNNs can complete the inference of AlexNet and VGG-16 within 0.13ms and 2.63ms.

Geng, Tong↗
DOE OSTI2024

A Low-Cost, Reconfigurable UWB Microwave Radar Front-End for Fine Resolution Nadir-Looking Measurements of Snow and Layered Media

This paper presents a reconfigurable, low-cost ultra-wideband microwave radar front-end and radar demonstrator designed for nadir-looking measurements of layered media (e.g. snow or vegetation) from either a fast-moving ground-based platform or a C-3 class unmanned aerial system (UAS). The radar demonstrator uses a frequency modulated continuous-wave (FMCW) architecture and can be configured to operate in either the 2-8 GHz or in the 12-18 GHz range, providing fine vertical resolution while offering a significantly reduced weight, size, and power consumption with respect to prior implementations. We have demonstrated the operation of the system in the 2-8 GHz and 12-18 GHz bands in the laboratory; in the 2-8 GHz band using a surface-based setup in Antarctica; and in the 2.6-7 GHz band on local flight tests onboard an Aurelia X6 Pro UAS equipped with 3-D printed antennas. This paper provides an overview of the radar front-end and demonstrator design and implementation and a summary of the different tests completed to document their performance.

UWB radar, UAS-borne radar, snow-probing radar.↗
DOE OSTI2024

Reconfigurable droplet networks

Droplet networks stabilized by lipid interfacial bilayers or colloidal particles have been extensively investigated in recent years and are of great interest for compartmentalized reactions and biological functions. However, current design strategies are disadvantaged by complex preparations and limited droplet size. Here, by using the assembly and jamming of cucurbit[8]uril surfactants at the oil-water interface, we show a novel means of preparing droplet networks that are multi-responsive, reconfigurable, and internally connected over macroscopic distances. Openings between the droplets enable the exchange of matter, affording a platform for chemical reactions and material synthesis. Our work requires only a manual compression to construct complex patterns of droplet networks, underscoring the simplicity of this strategy and the range of potential applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

RAFT: Reconfigurable Array of High-Efficiency Ducted Turbines for Hydrokinetic Energy Harvesting

Diversifying the energy harvesting portfolio is crucial to achieving the ambitious goal of transitioning to clean energy by 2030. Marine hydrokinetic energy has garnered renewed interest due to its high harvesting potential in the U.S., and the resource's reliability and predictability—remaining relatively constant on a daily basis and available 24/7. However, there are currently few commercial devices capable of harnessing the energy from flowing water. This project aims to bridge that gap by designing and evaluating a novel hydrokinetic turbine concept that can efficiently harvest energy from both rivers and tidal streams. The RAFT (Reconfigurable Array of High-Efficiency Ducted Turbines) concept introduces a duct surrounding the turbine rotor and creates an array of small 5-kW units. The duct serves two primary purposes: (1) it enhances hydrodynamic efficiency by accelerating flow to the rotor, and (2) it functions as a structural component, facilitating the formation of modular arrays that lower costs. This project focuses on demonstrating this concept and validating these benefits through simulations and scaled prototype testing. The project team includes 8 faculty members and over 20 students from 3 universities, organized into three core areas: hydrodynamics, electrical systems, and structural analysis, with additional teams dedicated to system integration, environmental assessment and risk management, and tech-to-market strategy. The team successfully demonstrated the increased hydrodynamic efficiency of a ducted turbine compared to an unducted version using high-fidelity simulations and prototype tests. Moreover, design optimization efforts led to surpassing the SHARKS program's goal of 60% reduction of the levelized cost of energy with a significant margin.

13 HYDRO ENERGY↗