Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Correlation between the electron-phonon coupling and rectifying performance for poly(3-hexylthiophene)/n-type Si devices

A correlation between the electron-phonon coupling and rectifying performance is identified for poly(3-hexylthiophene) (P3HT)/n-type Si devices and an analysis using the temperature-dependent Hall-effect characteristics is presented. The carrier mobility in the P3HT film exhibits strong temperature dependence, indicating the dominance of tunneling. However, the incorporation of titanium oxide (TiO{sub 2}) nanoparticles into P3HT leads to the dominance of hopping. The results demonstrate that the incorporation of TiO{sub 2} nanoparticles into P3HT influences the electrical property of P3HT/n-type Si devices by the electron-phonon coupling modification and the increased spacing between molecules that serve to enhance the carrier mobility in P3HT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of inverse-spin Hall effect and spin-rectified voltage on tantalum thickness in Ta/CoFeB bilayer structure

Ta-layer thickness (t{sub Ta}) dependence of the measured DC voltage V from the inverse-spin Hall effect (ISHE) in Ta/CoFeB bilayer structure is experimentally investigated using the ferromagnetic resonance in the TE{sub 011} resonant cavity. The ISHE signals excluding the spin-rectified effect (SRE) were separated from the fitted curve of V against t{sub Ta}. For t{sub Ta} ≈ λ{sub Ta} (Ta-spin diffusion length = 2.7 nm), the deviation in ISHE voltage V{sub ISH} between the experimental and theoretical values is significantly increased because of the large SRE contribution, which also results in a large deviation in the spin Hall angle θ{sub SH} (from 10% to 40%). However, when t{sub Ta} ≫ λ{sub Ta}, the V{sub ISH} values are consistent with theoretical values because the SRE terms become negligible, which subsequently improves the accuracy of the obtained θ{sub SH} within 4% deviation. The results will provide an outline for an accurate estimation of the θ{sub SH} for materials with small λ value, which would be useful for utilizing the spin Hall effect in a 3-terminal spintronic devices in which magnetization can be controlled by in-plane current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First principles design of divacancy defected graphene nanoribbon based rectifying and negative differential resistance device

We have studied using density functional theory and non-equilibrium Green’s function based approach, the electronic structures of 555-777 divacancy (DV) defected armchair edged graphene nanoribbons (AGNR) as well as the transport properties of AGNR based two-terminal devices constructed with one defected electrode and one N doped electrode. Introduction of 555-777 DV defect into AGNR results in shifting of the π and π∗ bands towards the higher energy value indicating a downward shift of the Fermi level. Formation of a potential barrier, analogous to that of conventional p-n junction, has been observed across the junction of defected and N-doped AGNR. The two terminal devices show diode like property with high rectifying efficiency for a wide range of bias voltages. The devices also show robust negative differential resistance with very high peak-to-valley ratio. Shift of the electrode energy states and modification of the transmission function with applied bias have been analyzed, in order to gain an insight into the nonlinear and asymmetric behavior of the current-voltage characteristics. Variation of the transport properties on the width of the ribbons has also been discussed.

36 MATERIALS SCIENCE↗

Multifunctional BiFeO{sub 3}/TiO{sub 2} nano-heterostructure: Photo-ferroelectricity, rectifying transport, and nonvolatile resistive switching property

Multifunctional BiFeO{sub 3} nanostructure anchored TiO{sub 2} nanotubes are fabricated by coupling wet chemical and electrochemical routes. BiFeO{sub 3}/TiO{sub 2} nano-heterostructure exhibits white-light-induced ferroelectricity at room temperature. Studies reveal that the photogenerated electrons trapped at the domain/grain boundaries tune the ferroelectric polarization in BiFeO{sub 3} nanostructures. The photon controlled saturation and remnant polarization opens up the possibility to design ferroelectric devices based on BiFeO{sub 3.} The nano-heterostructure also exhibits substantial photovoltaic effect and rectifying characteristics. Photovoltaic property is found to be correlated with the ferroelectric polarization. Furthermore, the nonvolatile resistive switching in BiFeO{sub 3}/TiO{sub 2} nano-heterostructure has been studied, which demonstrates that the observed resistive switching is most likely caused by the electric-field-induced carrier injection/migration and trapping/detrapping process at the hetero-interfaces. Therefore, BiFeO{sub 3}/TiO{sub 2} nano-heterostructure coupled with logic, photovoltaics and memory characteristics holds promises for long-term technological applications in nanoelectronics devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current-driven antivortex core resonance measured by the rectifying effect

We demonstrate the current-driven resonance of a single antivortex core confined in a cross-shaped Ni{sub 81}Fe{sub 19} wire. The antivortex core dynamics can be excited purely by spin transfer torque; therefore, it is significant to understand the current-induced magnetization dynamics. The antivortex core resonance can be measured from the frequency dependence of a rectified voltage generated by an alternating current application. We found that the resonance frequency and peak amplitude greatly depend on the external magnetic field. This result is in good agreement with micromagnetic simulation.

36 MATERIALS SCIENCE↗

Electro-magnetic transport and rectifying property of Fe{sub 2.5}Mn{sub 0.5}O{sub 4}/p-Si heterojunction

Fe{sub 2.5}Mn{sub 0.5}O{sub 4}/p-Si heterojunction was fabricated using a pulsed laser deposition technique and investigated it’s structural and electrical transport properties. The high-resolution transmission electron microscopy results reveal the formation of a polycrystalline film on silicon substrate. The heterojunction shows good rectifying property and giant negative junction magnetoresistance especially in reverse bias condition at room temperature. The origin of this giant negative junction magnetoresistance may be attributing to the injection of electrons to the majority spin-up band of the Fe{sub 2.5}Mn{sub 0.5}O{sub 4} film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigations on rectifying behavior of Y{sub 0.95}Ca{sub 0.05}MnO{sub 3}/Si junction

In this communication, we report the rectifying properties observed across the junction, consists of Ca{sup +2} doped hexagonal YMnO{sub 3} manganite film, grown on n-type (100) Si single crystalline substrate. The junction was grown using cost effective chemical solution deposition (CSD) technique by employing spin coating method. Surface morphology of Y{sub 0.9}5Ca{sub 0.05}MnO{sub 3}/Si (YCMO/Si) film was carried out by atomic force microscopy and magnetic response of film was studied by magnetic force microscopy. Current – voltage characteristics of the junction was carried out by using Keithley source meter in current perpendicular to plane (CPP) mode at different temperatures. Rectification in I – V behavior has been observed for the junction at all the temperatures studied. With increase in temperature, rectification ratio, in the range of 10{sup 4}, increases across the junction. Results have been discussed in the context of thermal effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the band alignment in rectifying SrIrO 3 /Nb:SrTiO 3 heterostructures

Here, we have examined the band alignment in SrIrO 3 /Nb:SrTiO 3 (001) heterojunctions at room temperature using three independent techniques: current–voltage and capacitance–voltage measurements and internal photoemission spectroscopy. We find near-ideal rectifying behavior across the junction, which provides the opportunity to establish the band alignment via Schottky barrier height extractions in the metal-semiconductor junction approximation. The Schottky barrier height deduced from these measurements agrees well with each other within ~14%, with an average value of 1.44 ± 0.11 eV. These results provide a foundation for designing oxide heterostructures to harness the strong spin-orbit coupling and electrochemical properties of strontium iridate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic basis of opening and conduction in mammalian inward rectifier potassium (Kir2.2) channels

Potassium ion conduction through open potassium channels is essential to control of membrane potentials in all cells. To elucidate the open conformation and hence the mechanism of K + ion conduction in the classic inward rectifier Kir2.2, we introduced a negative charge (G178D) at the crossing point of the inner helix bundle, the location of ligand-dependent gating. This “forced open” mutation generated channels that were active even in the complete absence of phosphatidylinositol-4,5-bisphosphate (PIP 2 ), an otherwise essential ligand for Kir channel opening. Crystal structures were obtained at a resolution of 3.6 Å without PIP 2 bound, or 2.8 Å in complex with PIP 2 . The latter revealed a slight widening at the helix bundle crossing (HBC) through backbone movement. MD simulations showed that subsequent spontaneous wetting of the pore through the HBC gate region allowed K + ion movement across the HBC and conduction through the channel. Further simulations reveal atomistic details of the opening process and highlight the role of pore-lining acidic residues in K + conduction through Kir2 channels.

59 BASIC BIOLOGICAL SCIENCES↗

RECTIFIED ASTEROID ALBEDOS AND DIAMETERS FROM IRAS AND MSX PHOTOMETRY CATALOGS

Rectified diameters and albedo estimates of 1517 main-belt asteroids selected from IRAS and the Mid-Course Space Experiment asteroid photometry catalogs are derived from updated infrared thermal models, the Standard Thermal Model and the Near-Earth Asteroid Thermal Model (NEATM), and Monte Carlo simulations, using new Minor Planet Center compilations of absolute magnitudes (H values) constrained by occultation- and radar-derived parameters. The NEATM approach produces a more robust estimate of albedos and diameters, yielding albedos of p{sub v} (NEATM mean) =0.081 {+-} 0.064. The asteroid beaming parameter ({eta}) for the selected asteroids has a mean value of 1.07 {+-} 0.27, and the smooth distribution of {eta} suggests that this parameter is independent of asteroid properties such as composition. No trends in {eta} due to size-dependent rotation rates are evident. Comparison of derived values of {eta} as a function of taxonomic type indicates that the beaming parameter values for S- and C-type asteroids are identical within the standard deviation of the population of beaming parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Rectified Rotational Dynamics of Mobile Inclusions in Two-Dimensional Active Nematics

We investigate the dynamics of mobile inclusions embedded in 2D active nematics. The interplay between the inclusion shape, boundary-induced nematic order, and autonomous flows powers the inclusion motion. Disks and achiral gears exhibit unbiased rotational motion, but with distinct dynamics. In comparison, chiral gear-shaped inclusions exhibit long-term rectified rotation, which is correlated with dynamics and polarization of nearby +1/2 topological defects. Furthermore, the chirality of defect polarities and the active nematic texture around the inclusion correlate with the inclusion’s instantaneous rotation rate. Inclusions provide a promising tool for probing the rheological properties of active nematics and extracting ordered motion from their inherently chaotic motion.

36 MATERIALS SCIENCE↗

Design Paradigm for Modular Multilevel Converter-Based Generator Rectifier Systems

Modular Multilevel Converters (MMC) are being widely considered for medium to high voltage DC applications. Designing such converters through multi-objective optimization is of interest because such an approach allows the trade-off between competing objectives (for example mass and loss) to be explicitly and quantitatively identified. In this work, an optimization based design paradigm for MMC based generator rectifier systems is proposed. Such development typically requires detailed component design and simulation models for the electric machine and converter which are computationally expensive. As an alternative, the proposed work utilizes an electric machine metamodel, inductor metamodel, and high-speed steady-state simulation model for the MMC to facilitate multi-objective optimization minimizing system metrics of interest while satisfying system constraints. A case study is undertaken to demonstrate the functionality of the proposed design paradigm.

42 ENGINEERING↗

Circuit Modelling of the Mechanical-Motion-Rectifier for Electrical Simulation of Ocean Wave Power Take-off

As is the case with several other mechanical power takeoffs (PTOs), the mechanical-motion-rectifier (MMR) based PTO consists of components such as one-way clutches, gears, a ball screw, mechanical couplings, and a generator. Equivalent circuit models have been created in this paper to describe the dry frictions, viscous damping, and mechanical compliances in these components, so the non-ideal efficiency and nonlinear force of the PTO can be predicted in electrical simulations by integrating these sub-circuit models. The circuit model is simplified, and its parameters are categorized as dc and ac unknowns. The dc and ac tests on the PTO are performed sequentially to extract two sets of parameters through linear regression or nonlinear curve fitting. Then, the model is validated through its prediction capability over 25 test conditions on input forces, output voltages, and efficiencies, with correlation coefficients of 0.9, 0.98, and 0.981, respectively.

42 ENGINEERING↗

Gas-enabled resonance and rectified motion of a piston in a vibrated housing filled with a viscous liquid

Herein, we show how introducing a small amount of gas can completely change the motion of a solid object in a viscous liquid during vibration. We analyze an idealized system exhibiting this behavior: a piston moving in a liquid-filled housing, where the gaps between the piston and the housing are narrow and depend on the piston position. Recent experiments have shown that vibration causes some gas to move below the piston and the piston to subsequently move downward and compress its supporting spring. Herein, we analyze the analogous but simpler situation in which the gas regions are replaced by bellows with similar pressure-volume relationships. We show that these bellows form a spring (analogous to the pneumatic spring formed by the gas regions) which enables the piston and the liquid to oscillate in a mode that does not exist without this spring. This mode is referred to here as the Couette mode because the liquid in the gaps moves essentially in Couette flow (i.e., with almost no component of Poiseuille flow). Since Couette flow by itself produces extremely low damping, the Couette mode has a strong resonance. We show that, near this resonance, the dependence of the gap geometry on the piston position produces a large rectified (net) force on the piston during vibration. As a result, this force can be much larger than the piston weight and the strength of its supporting spring and is in the direction that decreases the flow resistance of the gap geometry.

42 ENGINEERING↗

Thin-film semiconductor rectifier has improved properties

Cadmium selenide-zinc selenide film is used as a thin film semiconductor rectifier. The film is vapor-deposited in a controlled concentration gradient into a glass substrate to form the required junctions between vapor-deposited gold electrodes.

Source record↗

Substituting transistor for diode improves rectifying means

Unusual transistor connection that substitutes for a silicon diode and allows significantly higher repetition rates without increasing power loss rectifies an alternating current. Operation speed is improved by a factor of 10 or more when a given diode is replaced by this transistor circuit.

Muller, R. M.↗