SEARCH · Search NASA

Results for “reheating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1985

A preliminary study of the modified Ericsson for space power

Simple modifications of the Ericsson cycle are analyzed for their application as high power, compact and reliable space power systems. They use the same components as the technologically advanced and reliable Brayton system. These modifications approximate the Ericsson cycle's isothermal expansion by several stages of expansion with reheat and the isothermal compression by several compression stages with intercooling. Preliminary cycle analysis including non-ideal components indicates potential advantages in both power per unit area and efficiency over the Brayton system. Evaluation of the system mass indicates a significant mass and radiator area advantage of a Modified Ericsson cycle using one reheat and one expansion stage when a high temperature titanium radiator is used. Whereas the configuration using one reheat and one intercooling with two stages of compression and expansion provided the lowest mass per unit power using a lower temperature aluminum radiator.

Berner, J.↗

NASA NTRS1985

Melting of Ni40Pd40P20 glass

Upon reheating, most glassy metal alloys crystallize at a temperature not far removed from the glass temperature Tg and far below the liquidus temperature T1. It has been reported by Kui et al. (1984) that the alloy Ni40Pd40P20, which exhibits a scaled glass temperature of about 0.68, has been melt quenched, under a flux of dehydrated B2O3, to a glass at rates as low as 1 deg/s. Here some specimens of this alloy, when similarly fluxed during reheating, have been reheated to temperatures within 50 deg of T1 and 280 deg above Tg at rates of about 2.5 deg/s, and then cooled again to Tg, without crystallization. From this behavior it is inferred that the steady frequency of homogeneous nucleation of crystals in the alloy is less than 0.1/cu cm s.

Kui, H. W.↗

DOE OSTI2021

Direct Numerical Simulation of hydrogen combustion at auto-ignitive conditions: Ignition, stability and turbulent reaction-front velocity

Direct Numerical Simulations (DNS) are performed to investigate the process of spontaneous ignition of hydrogen flames at laminar, turbulent, adiabatic and non-adiabatic conditions. Mixtures of hydrogen and vitiated air at temperatures representing gas-turbine reheat combustion are considered. Adiabatic spontaneous ignition processes are investigated first, providing a quantitative characterization of stable and unstable flames. Results indicate that, in hydrogen reheat combustion, compressibility effects play a key role in flame stability and that unstable ignition and combustion are consistently encountered for reactant temperatures close to the mixture’s characteristic crossover temperature. Furthermore, it is also found that the characterization of the adiabatic processes is also valid in the presence of non-adiabaticity due to wall heat-loss. Finally, a quantitative characterization of the instantaneous fuel consumption rate within the reaction front is obtained and of its ability, at auto-ignitive conditions, to advance against the approaching turbulent flow of the reactants, for a range of different turbulence intensities, temperatures and pressure levels.

42 ENGINEERING↗

DOE OSTI2024

Inflaton Decay in No-Scale Supergravity and Starobinsky-like Models

We consider the decay of the inflaton in Starobinsky-like models arising from either an R+R 2 theory of gravity or N = 1 no-scale supergravity models. If Standard Model matter is simply introduced to the R+R 2 theory, the inflaton (which appears when the theory is conformally transformed into the Einstein frame) couples to matter predominantly in Standard Model Higgs kinetic terms. This will typically lead to a reheating temperature of ~3 × 10 9 GeV. However, if the Standard Model Higgs is conformally coupled to curvature, the decay rate may be suppressed and vanishes for conformal coupling ζ = 1/6. Nevertheless, the inflaton decays through the conformal anomaly, leading to a reheating temperature of the order of 10 8 GeV. The Starobinsky potential may also arise in no-scale supergravity. In this case, the inflaton decays if there is a direct coupling of the inflaton to matter in the superpotential or to gauge fields through the gauge kinetic function. We also discuss the relation between the theories and demonstrate the correspondence between the no-scale models and the conformally coupled R+R 2 theory (with ζ = 1/6).

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Dark matter, dark radiation and gravitational waves from mirror Higgs parity

An exact parity replicates the Standard Model giving a Mirror Standard Model, SM ↔ SM ' . This “Higgs Parity” and the mirror electroweak symmetry are spontaneously broken by the mirror Higgs, ( H ' ) = v ' >> ( H ), yielding the Standard Model Higgs as a Pseudo-Nambu-Goldstone Boson of an approximate SU (4) symmetry, with a quartic coupling λ SM ( v ' ) ~ 10 - 3 . Mirror electromagnetism is unbroken and dark matter is composed of e ' and $ {\overline{e}}^{\prime } $ . Direct detection may be possible via the kinetic mixing portal, and in unified theories this rate is correlated with the proton decay rate. With a high reheat temperature after inflation, the e t dark matter abundance is determined by freeze-out followed by dilution from decays of mirror neutrinos, ν ' → ℓH . Remarkably, this requires v ' ~ (10 8 –10 10 ) GeV, predicting a Higgs mass of 123 ± 3 GeV at 1 σ and a Standard Model neutrino mass of (10 - 2 –10 - 1 ) eV, consistent with observed neutrino masses. The mirror QCD sector exhibits a first order phase transition producing gravitational waves that may be detected by future observations. Mirror glueballs decay to mirror photons giving dark radiation with Δ N eff ~ 0 . 03–0 . 4. With a low reheat temperature after inflation, the e ' dark matter abundance is determined by freeze-in from the SM sector by either the Higgs or kinetic mixing portal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Light(ly)-coupled dark matter in the keV range: freeze-in and constraints

Dark matter produced from thermal freeze-out is typically restricted to have masses above roughly 1 MeV. However, if the couplings are small, the freeze-in mechanism allows for production of dark matter down to keV masses. We consider dark matter coupled to a dark photon that mixes with the photon and dark matter coupled to photons through an electric or magnetic dipole moment. We discuss contributions to the freeze-in production of such dark matter particles from standard model fermion-antifermion annihilation and plasmon decay. We also derive constraints on such dark matter from the cooling of red giant stars and horizontal branch stars, carefully evaluating the thermal processes as well as the bremsstrahlung process that dominates for masses above the plasma frequency. We find that the parameters needed to obtain the observed relic abundance from freeze-in are excluded below a few tens of keV, depending on the value of the dark gauge coupling constant for the dark photon portal model, and below a few keV, depending on the reheating temperature for dark matter with an electric or magnetic dipole moment. While laboratory probes are unlikely to probe these freeze-in scenarios in general, we show that for dark matter with an electric or magnetic dipole moment and for dark matter masses above the reheating temperature, the couplings needed for freeze-in to produce the observed relic abundance can be probed partially by upcoming direct-detection experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Gravitational waves from an inflation triggered first-order phase transition

Large excursion of the inflaton field can trigger interesting dynamics. One important example is a first-order phase transition in a spectator sector which couples to the inflaton. Gravitational waves (GWs) from such a first-order phase transition during inflation, an example of an instantaneous source, have an oscillatory feature. In this work, we show that this feature is generic for a source in an era of accelerated expansion. We also demonstrate that the shape of the GW signal contains information about the evolution of the early universe following the phase transition. In particular, the slope of the infrared part of the GW spectrum is sensitive to the evolution of the Hubble parameter when the GW modes reenter the horizon after inflation. The slope of the profile of the intermediate oscillatory part and the ultraviolet part of the GW spectrum depend on the evolution of the Hubble parameter when the modes exit horizon during the inflation and when they reenter the horizon during the reheating. The ultraviolet spectrum also depends on the details of the dynamics of the phase transition. We consider the GW signal in several models of evolution during and after inflation, and compare them with the minimal scenario of quasi- de Sitter inflation followed by radiation domination after a fast reheating, and demonstrate that the shape of the GW can be used to distinguish them. In this way, the GW signal considered in this paper offers a powerful probe to the dynamics of the early universe which is otherwise difficult to explore directly through CMB, large scale structure, big bang nucleosynthesis (BBN), and other well-studied cosmological observables.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

A closer look in the mirror: reflections on the matter/dark matter coincidence

We argue that the striking similarity between the cosmic abundances of baryons and dark matter, despite their very different astrophysical behavior, strongly motivates the scenario in which dark matter resides within a rich dark sector parallel in structure to that of the standard model. The near cosmic coincidence is then explained by an approximate ℤ$_{2}$ exchange symmetry between the two sectors, where dark matter consists of stable dark neutrons, with matter and dark matter asymmetries arising via parallel WIMP baryogenesis mechanisms. Taking a top-down perspective, we point out that an adequate ℤ$_{2}$ symmetry necessitates solving the electroweak hierarchy problem in each sector, without our committing to a specific implementation. A higher-dimensional realization in the far UV is presented, in which the hierarchical couplings of the two sectors and the requisite ℤ$_{2}$-breaking structure arise naturally from extra-dimensional localization and gauge symmetries. We trace the cosmic history, paying attention to potential pitfalls not fully considered in previous literature. Residual ℤ$_{2}$-breaking can very plausibly give rise to the asymmetric reheating of the two sectors, needed to keep the cosmological abundance of relativistic dark particles below tight bounds. We show that, despite the need to keep inter-sector couplings highly suppressed after asymmetric reheating, there can naturally be order-one couplings mediated by TeV scale particles which can allow experimental probes of the dark sector at high energy colliders. Massive mediators can also induce dark matter direct detection signals, but likely at or below the neutrino floor.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Infrared freeze-in of magnetic dipole dark matter

We propose a novel mechanism for the cosmological production of keV–GeV mass dark matter that interacts with the Standard Model through a small effective magnetic dipole moment. Such an interaction can be radiatively generated if dark matter couples to heavier charged particles. Previous studies have focused on the case where these charged states are much heavier than the reheat temperature, such that freeze-in production of dark matter is sensitive to the ultraviolet details of reheating. Here, we instead consider the possibility that these heavy states have masses comparable to the dark matter mass and are charged under a new kinetically-mixed U (1)$^{′}$. As a result, dark matter production is dominated by the infrared freeze-in of the heavy charged states that subsequently thermalize the rest of the dark sector to a temperature much below that of the visible bath. We delineate regions of parameter space consistent with cosmological and astrophysical constraints and identify benchmark scenarios that can guide the next generation of direct detection experiments searching for spin-dependent scattering of sub-GeV dark matter.

Berlin, Asher [Fermilab] (ORCID:0000000211561482)↗

DOE OSTI2025

Printed circuit primary heat exchanger for power conversion in heat pipe microreactor applications

Here, in the present study, a model was developed for a recuperated air Brayton cycle for heat pipe microreactors, and the effect of the primary heat exchanger type assessed. An annular flow heat exchanger and a printed circuit heat exchanger (PCHE) were evaluated. A sub-sized diffusion bonded, PCHE test specimen was manufactured and tested with nitrogen as the working fluid to validate and improve the PCHE model. A comparison of the thermal cycle efficiency for the Brayton cycle coupled to a heat pipe microreactor using each of the two primary heat exchangers showed competitive performance for both options, with achievable cycle efficiencies of 34 % and 35 % for the annular and printed circuit heat exchangers, respectively. The impact of heat pipe length and additional reheating stages on cycle efficiency was studied. Increasing the heat pipe condenser length from 0.8 to 2.0 m resulted in an increase in cycle efficiency of 3.5 % and 3.2 % for the annular and printed circuit heat exchangers, respectively. The use of additional reheating stages showed a reduction in cycle efficiency since the heat pipe surface area limits the primary heat exchanger size and effectiveness. These results highlight the importance of the primary heat exchanger on the performance of a heat pipe microreactor. Overall, the cycle model, testing, and heat exchanger model showed the potential for the PCHE to improve the economics of a heat pipe microreactor relative to the annular flow heat exchanger, which also opens the possibility to use different heat transfer fluids such as supercritical CO 2 .

PCHE↗

DOE OSTI2022

Review of liquid desiccant air dehumidification systems coupled with heat pump: System configurations, component design, and performance

Vapor Compression Systems (VCS) are the most common air conditioning technology. VCS cool the air to its dew point temperature (overcooling) to remove water vapor in the air through condensation and then reheats the air back to the comfort temperature for direct use. The VCS process is inefficient due to overcooling and reheating. Liquid Desiccant Dehumidification (LDD) is a potentially energy-efficient air conditioning. LDD removes water vapor in the process air using liquid desiccant’s high-water affinity. It hybrids with sensible cooling to control temperature and humidity separately. The LD in the LDD becomes weak after dehumidification. The LDD needs additional heating to regenerate the weak Liquid Desiccant (LD) to a high concentration for dehumidification. Earlier versions of the LDD systems use highly concentrated liquid desiccant (large water removal capability) to dehumidify the air by only dealing with latent load. It leads to highly elevated temperatures above 60 °C of heat sources (combustion or electric resistance-based heating) for regeneration. The energy needed for the elevated temperature heat resource significantly reduces or demolishes the benefit of LDD systems. In the recent two decades, researchers have investigated a new configured LDD system that couples an LDD with a heat pump at both dehumidification and regeneration sides for better efficiency. The heat pump provides cooling (from the evaporator) for both dehumidification and sensible cooling and simultaneous heating from the condenser for regeneration. The highly integrated system (HP-LDD) with improved efficiency enables the LDD to operate at lower concentrations and temperatures in dehumidification and regeneration. This paper depicts the working principle behind HP-LDD and its heating and cooling requirements. It reviews the comparison between the HP-LDD systems and the conventional LDD systems regarding system configurations, component design, energy efficiency, and dehumidification performance characteristics. The main findings from the review include the preferred use of packed bed over membrane-based dehumidifiers, the use of internally cooled dehumidifiers enabled by the HP cooling capacity, the high dispersion of HP operation conditions, and the dependence of dehumidification performance on various dehumidifiers. Finally, an outlook for future research on HP-LDD strategies is presented based on the reviewed works and their limitations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

A data-driven model for thermodynamic properties of a steam generator under cycling operation

The varying electricity demand from coal power plants due to the intermittent nature of renewable sources leads to load-follow and on/off operations referred to as cycling. Cycling causes transients of properties such as pressure and temperature within various components of the steam generation system.These transients cause increased damage because of fatigue and creep-fatigue interactions shortening the life of components. An algorithm is developed to identify cycling operations from the gross power data. The data-driven model based on artificial neural networks (ANN) is developed using 10 years data from Coal Creek Station power plant located in North Dakota, USA to estimate properties of the steam generator components during cycling operations. Furthermore, the uniqueness of this model is the ability to predict component properties for the cycling as well as base-load operations and is reported for the first time. The ANN model estimates the component properties, for a given gross power profile and initial conditions, as they vary during cycling operations. As a representative example, the ANN estimates are presented for the superheater outlet pressure, reheater inlet temperature, and flue gas temperature at the air heater inlet. The changes in these variables as a function of the gross power over the time duration are compared with measurements to assess the predictive capability of the model. Mean square errors of 4.49E-04 for superheater outlet pressure, 1.62E-03 for reheater inlet temperature, and 4.14E-04 for flue gas temperature at the air heater inlet were observed.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2020

Pseudosmooth tribrid inflation in SU(5)

A realistic tribrid model of sneutrino inflation is constructed in an R-symmetric SU(5) grand unified theory (GUT). To avoid the monopole problem, a pseudosmooth inflationary trajectory is generated with the help of an additional Z 5 symmetry which is broken during and after inflation. The predictions of inflationary parameters are made at the central value of the scalar spectral index, n s =0.968. The largest possible value of the tensor to scalar ratio, r ≲ 0.0027, is obtained with sub-Planckian field values (≲m P ). A successful realization of reheating and leptogenesis is achieved by avoiding the gravitino problem with a reheat temperature as low as 10 6 GeV. The predicted range of the gauge symmetry breaking scale, 5 × 10 16 ≲ M/GeV ≲ 5 × 10 17 , turns out to be somewhat larger than the typical GUT scale. Finally, with additional vector-like families, a successful gauge coupling unification is achieved by avoiding the no-go theorem related to R-symmetric SU(5) GUT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Realistic inflation in no-scale U(1) R symmetric flipped SU(5)

We have realized non-minimal Higgs inflation and standard hybrid inflation in the supersymmetric flipped SU(5) model with U(1) R symmetry using the no-scale form of the Kähler potential. In non-minimal Higgs inflation the waterfall Higgs field plays the role of inflaton, and in standard hybrid inflation the gauge singlet field S is employed as an inflaton. The predictions of both models are in good agreement with the Planck 2018 data. For numerical calculations we have fixed the gauge symmetry breaking scale, M, around 2 × 10 16 GeV. In both models the inflaton field values are constrained below m P . The tensor to scalar ratio r in non-minimal inflation is of the order of 10 -3 and for standard hybrid inflation r is tiny, of order 10 -15 –10 -4 . The scalar spectral index in both cases lie within the Planck 1-σ bounds, and the running of the scalar spectral index lies in the range, -dn s /d ln k ~ 6 × 10 -4 for non-minimal model and 10 -9 –10 -3 for the standard hybrid model. A realistic scenario of reheating and non-thermal leptogenesis is employed with reheat temperature T r ~ 10 9 GeV for non-minimal model and 10 6 –10 10 GeV for standard hybrid model. The R-symmetry plays a vital role in forbidding rapid proton decay, but at the same time it also suppresses terms responsible for generating right handed neutrino masses. A realistic scenario of right handed neutrino masses is obtained by considering effective R symmetry breaking at the nonrenormalizable level with adequate suppression of rapid proton decay.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Sneutrino tribrid inflation, metastable cosmic strings and gravitational waves

Here, we present a successful realization of sneutrino tribrid inflation model based on a gauged U(1)_B-L extension of Minimal Supersymmetric Standard Model (MSSM). A single interaction term involving the B-L Higgs field and the right-handed neutrinos serves multiple purposes. These include the generation of heavy Majorana masses for the right-handed neutrinos to provide an explanation for the tiny neutrino masses via the seesaw mechanism, a realistic scenario for reheating and non-thermal leptogenesis with a reheat temperature as low as 10 6 GeV, and a successful realization of inflation with right-handed sneutrino as the inflaton. The matter parity which helps avoid rapid proton decay survives as a Z 2 subgroup of a U(1) R-symmetry. Depending on the choice of model parameters yields the following predicted range of the tensor to scalar ratio, 3 x 10 -11 ≲ r≲ 7x 10 -4 (6 x 10 -7 ≲ r ≲ 0.01), and the running of the scalar spectral index, -0.00022 ≲ dn_s/dln k ≲ -0.0026 (-0.00014 ≲ dn_s/dln k ≲ 0.005), along with the B-L breaking scale, 3 x 10 14 ≲ M/ GeV≲ 5 x 10 15 (6 x 10 15 ≲ M/ GeV≲ 2 x 10 16 ), calculated at the central value of the scalar spectral index, n_s =0.966, reported by Planck 2018. The possibility of realizing metastable cosmic strings in a grand unified theory setup is briefly discussed. The metastable cosmic string network admits string tension values in the range 10 -8 ≲ Gμ s ≲ 10 -6 , and predicts a stochastic gravitational wave background lying within the 2-σ bounds of the recent NANOGrav 12.5-yr data.

supersymmetry and cosmology↗

DOE OSTI2021

Smallest remnants of early matter domination

The evolution of the universe prior to Big Bang Nucleosynthesis could have gone through a phase of early matter domination which enhanced the growth of small-scale dark matter structure. If this period was long enough, self-gravitating objects formed prior to reheating. Here, we study the evolution of these dense early halos through reheating. At the end of early matter domination, the early halos undergo rapid expansion and eventually eject their matter. We find that this process washes out structure on scales much larger than naively expected from the size of the original halos. We compute the density profiles of the early halo remnants and use them to construct late-time power spectra that include these non-linear effects. We evolve the resulting power spectrum to estimate the properties of microhalos that would form after matter-radiation equality. Surprisingly, cosmologies with a short period of early matter domination lead to an earlier onset of microhalo formation compared to those with a long period. In either case, dark matter structure formation begins much earlier than in the standard cosmology, with most dark matter bound in microhalos in the late universe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Dark radiation isocurvature from cosmological phase transitions

Abstract Cosmological first order phase transitions are typically associated with physics beyond the Standard Model, and thus of great theoretical and observational interest. Models of phase transitions where the energy is mostly converted to dark radiation can be constrained through limits on the dark radiation energy density (parameterized by ΔN eff ). However, the current constraint (ΔN eff < 0.3) assumes the perturbations are adiabatic. We point out that a broad class of non-thermal first order phase transitions that start during inflation but do not complete until after reheating leave a distinct imprint in the scalar field from bubble nucleation. Dark radiation inherits the perturbation from the scalar field when the phase transition completes, leading to large-scale isocurvature that would be observable in the CMB. We perform a detailed calculation of the isocurvature power spectrum and derive constraints on ΔN eff based on CMB+BAO data. For a reheating temperature ofT rh and a nucleation temperatureT * , the constraint is approximately ΔN eff ≲ 10 -5 (T * /T rh ) -4 , which can be much stronger than the adiabatic result. We also point out that since perturbations of dark radiation have a non-Gaussian origin, searches for non-Gaussianity in the CMB could place a stringent bound on ΔN eff as well.

Astronomy & Astrophysics↗

DOE OSTI2024

Warm inflation with a heavy QCD axion

We propose the first model of warm inflation in which the particle production emerges directly from coupling the inflaton to Standard Model particles. Warm inflation, an early epoch of sustained accelerated expansion at finite temperature, is a compelling alternative to cold inflation, with distinct predictions for inflationary observables such as the amplitude of fluctuations, the spectral tilt, the tensor-to-scalar ratio, and non-gaussianities. In our model a heavy QCD axion acts as the warm inflaton whose coupling to Standard Model gluons sources the thermal bath during warm inflation. Axion-like couplings to non-Abelian gauge bosons have been considered before as a successful microphysical theory with emerging thermal friction that can maintain finite temperature during inflation via sphaleron heating. However, the presence of light fermions charged under the non-Abelian group suppresses particle production, hindering a realization of warm inflation by coupling to QCD. We point out that the Standard Model quarks can be heavy during warm inflation if the Higgs field resides in a high-energy second minimum which restores efficient sphaleron heating. A subsequent large reheating temperature is required to allow the Higgs field to relax to its electroweak minimum. Exploring a scenario in which hybrid warm inflation provides the large reheating temperature, we show that future collider and beam dump experiments have discovery potential for a heavy QCD axion taking the role of the warm inflaton.

79 ASTRONOMY AND ASTROPHYSICS↗