Search NASA⌕ Search

SEARCH · Search NASA

Results for “rigid structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thermal and mechanical performance of gypsum composites containing fly ash cenosphere encapsulated phase change materials

Utilizing phase change materials (PCMs) within construction materials improves the thermal energy storage capabilities in the built environment. Notably, integrating PCMs into drywalls presents a promising avenue to reduce building energy use. However, incorporating PCMs into drywalls poses challenges, particularly reduced mechanical properties and workability limitations as it can adversely affect the hardening and cohesiveness of gypsum composites. To address these challenges, this study explores a novel strategy to incorporate PCMs into gypsum composites through fly ash cenosphere-encapsulated PCM, namely CenoPCM, aiming to enhance the mechanical properties and thermal conductivity over existing commercial counterparts. An experimental program was conducted to study the impact of the inclusion of CenoPCM on the mechanical and thermal performance of gypsum composites, and the results were compared to those of commercially available polymerencapsulated PCM benchmark (Micronal). The findings highlighted that PCM-charged samples exhibited up to 95.90 J/g (CenoPCM) of latent heat with 70 % CenoPCM loading. The results of mechanical tests also showed that CenoPCM outperformed its polymer-encapsulated counterpart, achieving 55 % higher mechanical strength on average. Here, this improvement is attributed to the rigid shell of fly ash cenosphere (FAC) serving as a PCM carrier, providing a skeleton-like structure to gypsum composites for higher load-bearing capacity. Additionally, hotbox tests demonstrated that the CenoPCM-charged wall panels yielded a 20 % higher thermal conductivity and a 22 % increased time lag compared to Micronal PCM-charged panels, indicating its potential to shift the peak load in buildings.

Ceno PCM↗
DOE OSTI2026

Rubisco kinetic acclimation at the holoenzyme level

Kinetic acclimation enables proteins to adjust their activity in response to environmental perturbations. For the CO 2 -fixing enzyme Rubisco, kinetic acclimation may be conferred by its small subunits. Plants express multiple small subunits and vary their expression with temperature. Here, we demonstrate that different small subunits can bind to the same Rubisco to form a heterogeneous holoenzyme. These small subunits had distinct kinetic effects which aligned with changes in holoenzyme structure and stability. Our findings indicate that small subunits enable Rubisco kinetic acclimation via manipulation of flexibility. By assembling a more rigid active site in higher temperatures and a more flexible one in lower temperatures, plants maximize the efficiency of their Rubisco, and thus photosynthesis, over a wide range of temperatures.

CO2 fixation↗
DOE OSTI2026

A continuous symmetry breaking measure for finite clusters using Jensen-Shannon divergence

A quantitative measure of symmetry breaking is introduced that allows the quantification of which symmetries are most strongly broken due to the introduction of some kind of defect in a perfect structure. The method uses a statistical approach based on the Jensen-Shannon divergence. The measure is calculated by comparing the transformed atomic density function with its original. Software code is presented that carries the calculations out numerically using Monte Carlo methods. The behavior of this symmetry breaking measure is tested for various cases including finite size crystallites (where the surfaces break the crystallographic symmetry), atomic displacements from high symmetry positions, and collective motions of atoms due to rotations of rigid octahedra. Finally, the approach provides a powerful tool for assessing local symmetry breaking and offers new insights that can help researchers understand how different structural distortions affect different symmetry operations.

atomic & molecular structure↗
DOE OSTI2025

Confinement-Driven Segregation Enables Glassy Polymer Hybrid Materials Featuring Disordered Hyperuniformity and Integrated Self-Healing

The blending of glassy copolymer-brush modified colloids with a viscoelastic linear copolymer featuring intrinsic self-healing enabled disordered hyperuniform hybrid materials that combined mechanical robustness with structural color, processability, environmental stability, and the ability to recover structure and properties after incurring physical damage via ‘integrated self-healing’. Symmetric linear n-butyl acrylate/methyl methacrylate (BA/MMA) were co-assembled with asymmetric glassy BA/MMA statistical copolymer brush (silica) particles. ‘Confinement-driven segregation’ resulted in a microphase-separated morphology in which the linear copolymer resided within the interstitial regions of a rigid (∼1 GPa) copolymer brush particle template with disordered hyperuniform microstructure. Diffusion of the self-healing copolymer additive into damage regions drove the recovery after damage, along with the restoration of structural color due to the materials hyperuniform microstructure. The synergistic action of intrinsic and extrinsic healing mechanisms could provide a versatile platform for the bottom-up fabrication of multifunctional hybrid materials with increased damage resistance and functional longevity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Manipulation of intramolecular hydrogen bonds in conjugated pseudoladder polymer for semiconductivity and solution-processability

The conformational coplanarity and local rigidity of π-conjugated backbones are critical for the semiconducting performance of organic electronic materials. The conformational coplanarity and local rigidity of π-conjugated backbones are critical for the semiconducting performance of organic electronic materials. While fusing the aromatic system into a ladder-type structure effectively enhances these properties, it also often results in poor solution processability and hence limits their transition to device application. To address this challenge, an intramolecularly hydrogen-bonded pseudoladder polymer (HPLP) system based on alternating hydrogen bond donating benzobisimidazole (BBI) and hydrogen bond accepting benzodifuran (BDF) units, is designed and synthesized. A Boc-protected precursor of HPLP allows for feasible solution processing of the polymer into thin films. Subsequently, in situ thermal Boc-deprotection generates the HPLP polymer, in which intramolecular hydrogen bonds form between each pair of neighboring repeating units, inducing coplanarity and rigidity throughout the entire backbone. This process is accompanied by a significant red-shift of the absorption spectrum, reduced bandgap, and enhanced rigidity, as confirmed by NMR, UV-Vis, and density functional theory analyses. HPLP films exhibit a three-order-of-magnitude enhancement in charge carrier mobility compared to the Boc-protected precursor and demonstrate excellent solvent resistance in organic thin-film transistors.

Miranda, Octavio↗
DOE OSTI2026

Ultrasonic-Assisted Extrusion Processing for Enhancing Physical Properties of High-Density Polyethylene by Flow-Induced Crystallization

The evolution of crystallinity resulting from stress imposed on a melt, known as flow-induced crystallinity, can strongly influence the mechanical and physical properties of semicrystalline polymers. This study investigates shear-induced crystallization by applying an ultrasonic field to the melt flow as it passes through dies with various geometries. A custom-built sonication die is employed for controlling the dynamic temperature and shear environment, resulting in molecular alignment and potential for flow-induced crystallization. Application of both conventional and ultrasonic shear rates at the equilibrium melt temperature of high-density polyethylene (HDPE) was investigated to accelerate crystallinity and manipulate the crystal morphology across the film in pursuit of improved mechanical and gas barrier properties without the need for additives or other polymer layers. The relationships among ultrasonic-assisted extrusion processing, polymer structure, and performance were analyzed using wide- and small-angle X-ray scattering (WAXS and SAXS), tensile testing, and oxygen transmission rate (OTR) analysis. Multiple linear regression models were implemented to predict the correlation among HDPE structure, process, and properties. Structural analysis revealed that both conventional and ultrasonic shear rates had the most significant influence on lamellar spacing and redistribution of rigid and soft amorphous fractions within the crystalline domains, ultimately dictating the mechanical and physical properties of the films. The goal is to explore the potential of the ultrasonic-assisted high crystallinity monolayer that can replace some of the functionality of complex, heterogeneous multilayer packaging with a single-material film having enhanced oxygen barrier properties.

crystallinity↗
DOE OSTI2024

Magnetic order in nanogranular iron germanium (Fe 0.53 Ge 0.47 ) films

We study the effect of strain on the magnetic properties and magnetization configurations in nanogranular Fe x Ge 1-x films (x = 0.53 ± 0.05) with and without B20 FeGe nanocrystals surrounded by an amorphous structure. Relaxed films on amorphous silicon nitride membranes reveal a disordered skyrmion phase while films near and on top of a rigid substrate favor ferromagnetism and an anisotropic hybridization of Fe d levels and spin-polarized Ge sp band states. The weakly coupled topological states emerge at room temperature and become more abundant at cryogenic temperatures without showing indications of pinning at defects or confinement to individual grains. These results demonstrate the possibility to control magnetic exchange and topological magnetism by strain and inform magnetoelasticity-mediated voltage control of topological phases in amorphous quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Self-healing macromolecular crystal materials

Hybrid materials are disclosed including molecular/protein crystals integrated with synthetic polymers. The disclosed materials combine the structural order and periodicity of crystals, the adaptiveness and tunable mechanical properties of polymeric networks, and the chemical versatility of protein building blocks. Some of the properties of the disclosed materials include the following: 1) allows crystals—which are typically rigid and brittle—to expand and contract reversibly; 2) incorporates polymers to increase the mechanical toughness of the crystals and allow self-healing; 3) reversibly expand/contract crystal lattices and mobilize the protein components therein may provide a new means to improve X-ray diffraction quality and explore otherwise inaccessible protein structural states using 3D protein crystallography; 4) creation of chemically and mechanically differentiated domains within single crystals. Some example embodiments combine the properties of hydrogels (flexibility, adaptability, elasticity, self-healing), crystals (structural order) and proteins (chemical and genetic tailorability).

Tezcan, Faik↗
DOE OSTI2025

Bridging Atomic Solvation Environment with Electrochemical Properties for the Bis(trifluoromethylsulfonyl)imide-Based Divalent Cation Electrolytes for the Next-Generation Energy Storage Systems

A deep molecular-level understanding of the multivalent electrolyte and its correlation with the electrochemical properties is crucial for designing optimized electrolytes for next-generation rechargeable batteries. Comprehensive knowledge of the atomic level of the solvation structure and its connection with electrochemical stability and ion transport properties is especially critical. However, the interaction of these three components coupled with clear atomistic insights is lacking in the literature. Here, our current contribution evaluates representative electrolytes with the bis(trifluoromethanesulfonyl)imide (TFSI) anions for multivalent cations of Mg, Ca, and Zn, at different ionic conditions with and without a cosolvated environment in ether-based solvent. Two critical problems are investigated: first, resolving the solvation structures in the electrolyte solutions as a function of concentrations through pair distribution function analysis and the corresponding electrochemical transport properties; second, unmasking the quantitative correlation of the atomistic environment with both electrochemical kinetics and cation dependence. We discovered that the magnesium- and calcium-based electrolytes display versatile coordination lengths but poor average anodic stability due to ion pairing with TFSI - . On the contrary, the zinc-based electrolytes show the shortest solvent coordination lengths, shielding the Zn cation from rigid solvent interactions and resulting in the highest anodic stabilities. Calcium-based electrolytes exhibit the longest and most concentration-independent coordination lengths. This work provides valuable insights into the molecular structural and electrochemical features of diverse multivalent electrolyte systems with cations in various solvation environments, emphasizing the importance of the solvation structure and construction in designing high-performance electrolytes.

cation coordination↗
DOE OSTI2025

Composition dependence of atomic order in strain-relaxed, metastable GeSn alloys

Extended x-ray absorption fine structure (EXAFS) measurements of single-crystal Ge/GeSn radial heterostructure nanowires are used to examine the effects of composition on both short-range order (SRO) and longer-range disorder in GeSn alloys. GeSn has prompted significant interest because it can achieve a direct band gap for sufficient Sn concentrations beyond the equilibrium solid solubility limit in an all-group IV system. Short-range order in this material is particularly interesting as it has been predicted to affect the band gap independent of average composition or strain effects. By independently controlling the Sn composition and GeSn thickness during chemical vapor deposition of misfitting GeSn shells around ultrathin, elastically compliant, Ge core nanowires, the elastic misfit strain in the GeSn is minimized for Sn compositions over the studied range ≈Ge 0.96 Sn 0.04 to Ge 0.88 Sn 0.12 . The degree of SRO was found to decrease with increasing Sn composition. Additionally, damping of the EXAFS signal was observed as the Sn content increased, particularly for increasingly distant atomic shells about the absorbing atom, even for scattering paths not involving Sn atoms. This result is quantified as an increase in the mean-squared relative displacement parameters of the shells. These measurements reveal the accommodation of local strain due to the presence of the highly size-mismatched Sn atoms in the Ge diamond cubic lattice (≈14%), which may have effects on the band structure of the material in addition to the influence of short-range atomic order. Comparison among the nanowire samples allows for calculation of the topological rigidity parameter, a ∗∗ , for the first-neighbor bond lengths. Furthermore, these exhibit chemically distinct values for Ge-Ge, Ge-Sn, and Sn-Sn, and they are consistent with the value a ∗∗ = 0.75 ± 0.07 confirming the general applicability of the model to alloys with both large amounts of natural misfit strain and the potential for short-range order.

Crystal structure Semiconductors Transmission elec↗
DOE OSTI2025

Conformationally Adaptable Extractant Flexes Strong Lanthanide Reverse-Size Selectivity

Chemical selectivity is traditionally understood in the context of rigid molecular scaffolds with precisely defined local coordination and chemical environments that ultimately facilitate a given transformation of interest. By contrast, nature leverages dynamic structures and strong coupling to enable specific interactions with target species in otherwise complex media. Taking inspiration from nature, we demonstrate unconventional selectivity in the solvent extraction of light over heavy lanthanides using a conformationally flexible ligand called octadecyl acyclopa (ODA). This novel ligand forms pseudocyclic molecular complexes with lanthanide ions at organic/aqueous interfaces, revealed by vibrational sum frequency generation spectroscopy. These complexes are extracted into the organic phase, where femtosecond structural dynamics are probed by two-dimensional infrared spectroscopy and ab initio molecular dynamics simulations to mechanistically frame the macroscopic selectivity trends. We find larger-than-expected structural fluctuations and bond lengths for heavy Ln–ODA complexes that arise from an inability of ODA to contort around the smaller ions to satisfy all would-be bonding interactions, despite forming some individually strong bonds. This finding contrasts with the binding of ODA with lighter lanthanides where, despite individually weaker bonds, collective interactions manifest that minimize structural fluctuations and give rise to enhanced thermodynamic stability. Furthermore, these results point to a new paradigm where conformational dynamics and cumulative bonding interactions can be used to facilitate unconventional chemical transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ligand-Functionalized Polymer Membranes for Selective Ion Separations

Selective ion separations are central to technologies spanning water purification, resource recovery, and clean energy. Conventional polymer membranes, which rely on steric hindrance or Donnan exclusion, struggle to discriminate between chemically similar ions in high-ionic-strength environments. Ligand-functionalized membranes offer a transformative strategy by embedding molecular recognition directly into polymer matrices, enabling selective complexation and transport. Here, this Viewpoint highlights the structure–function relationships underlying ligand-mediated ion separation, emphasizing the interplay of dehydration penalties, ligand coordination, and nanoscale confinement. We discuss design principles, denticity, donor identity, rigidity, and spatial organization, alongside the permeability–selectivity trade-off, multicomponent effects, and stability challenges. Finally, we outline emerging strategies, from bioinspired ligands to computationally guided design, that chart a path toward next-generation membranes for precise and energy-efficient ion separations.

ions↗
DOE OSTI2026

2D Semiconductor Nanosheets Supported on Colloidal Quantum Cubes

Two-dimensional (2D) colloidal nanocrystals bridge the physics of epitaxial quantum wells with the synthetic scalability of solution-processed nanomaterials, making them an attractive platform for future LEDs, lasers, and photodetectors. However, their strongly anisotropic 2D morphology complicates the formation of close-packed films required for electrically interfaced devices. Here, we address this limitation by introducing semiconductor quantum cubes (QCs) in which 2D CdSe nanosheets are conformally grown on six faces of CdS cubic scaffolds. This architecture preserves excitonic physics of quasi-2D nanosheets while leveraging the mechanical rigidity and self-assembly of nanocubes, enabling close-packed films with improved electronic coupling and electrical conductivity. By extending CdS/CdSe QCs into a CdS/CdSe/CdS core/shell/shell structure, we realize 2D quantum wells that exhibit unusual multiexciton behavior. In particular, CdS/CdSe/CdS QCs show repulsive exciton–exciton interactions, which decouple CdSe facets into quasi-independent emitters. This leads to the suppressed Auger recombination, long multiexciton lifetimes, and broadband optical gain. The demonstrated combination of unusual multiexciton photophysics and favorable film self-assembly characteristics in QCs presents opportunities for solution-processed optoelectronic devices.

perovskites↗
DOE OSTI2025

Robust supermoiré pattern in large-angle single-twist bilayers

Forming long-wavelength moiré superlattices in van der Waals bilayers that have a small-angle twist between the two layers has been a key approach for creating moiré flat bands. However, for small twist angles, strong lattice reconstruction creates domain walls and other forms of disorder in the moiré pattern, posing considerable challenges for engineering such platforms. At large twist angles, the lattices are more rigid, but it is difficult to produce flat bands in shorter-wavelength moiré superlattices. Here, in this study, we introduce an approach for tailoring robust supermoiré structures in bilayers of transition-metal dichalcogenides using only a single twist near a commensurate angle. Structurally, we show the spontaneous formation of a periodic arrangement of three inequivalent commensurate moiré stackings, where the angle deviation from the commensurate angle determines the periodicity. Electronically, we reveal a large set of van Hove singularities that indicate strong band hybridization, leading to flat bands near the valence band maximum. Our study extends the study of the interplay among band topology, quantum geometry and moiré superconductivity to the large twist angle regime.

electronic properties and materials↗
DOE OSTI2025

Solar Modulation of Cosmic Nuclei over a Solar Cycle: Results from the Alpha Magnetic Spectrometer

We report the properties of precision time structures of cosmic nuclei He, Li, Be, B, C, N, and O fluxes over an 11-year solar cycle from May 2011 to November 2022 in the rigidity range from 1.92 to 60.3 GV. The nuclei fluxes show similar but not identical time variations with amplitudes decreasing with increasing rigidity. In particular, below 3.64 GV the Li, Be, and B fluxes, and below 2.15 GV the C, N, and O fluxes, are significantly less affected by solar modulation than the He flux. We observe that these differences in solar modulation are linearly correlated with the differences in the spectral indices of the cosmic nuclei fluxes. This shows, in a model-independent way, that solar modulation of galactic cosmic nuclei depends on their spectral shape. In addition, solar modulation differences due to nuclei velocity dependence on the mass-to-charge ratio (𝐴/𝑍) are not observed.

cosmic ray composition & spectra↗
DOE OSTI2024

Additive manufacturing of sandwich panels with continuous fiber reinforced high modulus composite facings

Abstract An improved approach consisting of a combination of fiber placement and fused filament fabrication is introduced for the additive manufacture (AM) of structural grade sandwich beams. Here, sandwich beams are additively manufactured using in‐situ deposition and consolidation of continuous fiber unidirectional facings made from a commingled yarn system of e‐glass fiber (~50% vol.) and amorphous PET, and a hexagonal honeycomb core structure made from PETG. Both facings and the sandwich core are manufactured on a single machine, in one sequence (skin‐core‐skin), employing the benefit of matrix compatibility to create autohesion at the interfaces. Flexural and transverse shear rigidity are determined experimentally and compared with analytical predictions and show correlation to within 3%. Flexural strength and core shear strength are also measured. Post‐mortem examinations show that core fracture and core facing debond were the dominant failure mode in flexure. Single cantilever beam tests were performed to evaluate core facing debond toughness. Subsequently, surface preheat using infrared heaters was utilized to increase autohesion between core and facing. The results show debond toughness was increased 4 times using infrared heating. This research effort presents a manufacturing approach that has the potential for the AM of stiff, well bonded, structural grade sandwich beams, in an integrated sequence, employing in‐situ consolidation to the facings, without the need for the use of intermediate adhesives for skin‐to‐core bonding. Highlights An improved additive manufacturing technique for making sandwich panels is developed. Sandwich panel facings have fiber volume fractions of approximately 50%. Surface preheat improves core‐to‐facing debond toughness by a factor of 4. Top and bottom facings are consolidated during manufacture leading to better properties. Experimental results are compared to analytical predictions and show good correlation.

17 WIND ENERGY↗