Search NASA⌕ Search

SEARCH · Search NASA

Results for “rock finding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Gas diffusion through variably-water-saturated zeolitic tuff: Implications for transport following a subsurface nuclear event

Noble gas transport through geologic media has important applications in the characterization of underground nuclear explosions (UNEs). Without accurate transport models, it is nearly impossible to distinguish between xenon signatures originating from civilian nuclear facilities and UNEs. Understanding xenon transport time through the earth is a key parameter for interpreting measured xenon isotopic ratios. One of the most challenging aspects of modeling gas transport time is accounting for the effect of variable water saturation of geological media. In this study, we utilize bench-scale laboratory experiments to characterize the diffusion of krypton, xenon, and sulfur hexafluoride (SF6) through intact zeolitic tuff under different saturations. Here, we demonstrate that the water in rock cores with low partial saturation dramatically affects xenon transport time compared to that of krypton and SF6 by blocking sites in zeolitic tuff that preferentially adsorb xenon. This leads to breakthrough trends that are strongly influenced by the degree of the rock saturation. Xenon is especially susceptible to this phenomenon, a finding that is crucial to incorporate in subsurface gas transport models used for nuclear event identification. We also find that the breakthrough of SF6 diverges significantly from that of noble gases within our system. When developing field scale models, it is important to understand how the behavior of xenon deviates from chemical tracers used in the field, such as SF6 (Carrigan et al., 1996). These new insights demonstrate the critical need to consider the interplay between rock saturation and fission product sorption during transport modeling, and the importance of evaluating specific interactions between geomedia and gases of interest, which may differ from geomedia interactions with chemical tracers.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS2013

A Renewed Search for Elusive Lunar Granophyres

Recent remote sensing studies [e.g., 1-3] indicate that several un-sampled regions of the Moon have significantly higher concentrations of silicic material (also high in [K], [U], and [Th]) than sampled regions. Within these areas are morphological features that are best explained by the existence of chemically evolved volcanic rocks. Observations of silicic domes [e.g., 1-5] suggest that sizable networks of silicic melt were present during crust-formation. Because of these recent findings there is a renewed interest in the petrogenesis of lunar, felsic igneous rocks. Specific questions are: (1) when were these magmas generated?, and (2) what was the source material? The two main hypotheses for generating silicic melts on Earth are fractional crystallization or partial melting of preexisting crust. On the Moon silicic melts are thought to have been generated during extreme fractional crystallization involving end-stage silicate liquid immiscibility (SLI) [e.g. 6, 7]. However, SLI cannot account for the production of significant volumes of silicic melt and its wide distribution, as reported by the remote global surveys [1, 2, 3]. In addition, experimental and natural products of SLI show that U and Th, which are abundant in the lunar granites and seen in the remote sensing data of the domes, are preferentially partitioned into the depolymerized ferrobasaltic magma and not the silicic portion [8, 9]. If SLI is not the mechanism that generated silicic magmas on the Moon then alternative processes such as fractional crystallization (only crystal-liquid separation) or partial melting should be considered as viable possibilities to be tested.

Mills, R. D.↗
NASA NTRS2013

A Thorough Search for Elusive Lunar Granophyres

Recent remote sensing studies [e.g., 1-3] indicate that several un-sampled regions of the Moon have significantly higher concentrations of silicic material (also high in [K], [U], and [Th]) than sampled regions. Within these areas are morphological features that are best explained by the existence of chemically evolved volcanic rocks. Observations of silicic domes [e.g., 1-5] suggest that sizable networks of silicic melt were present during crust-formation. Because of these recent findings there is a renewed interest in the petrogenesis of lunar, felsic igneous rocks. Specific questions are: (1) when were these magmas generated?, and (2) what was the source material? The two main hypotheses for generating silicic melts on Earth are fractional crystallization or partial melting of preexisting crust. On the Moon silicic melts are thought to have been generated during extreme fractional crystallization involving end-stage silicate liquid immiscibility (SLI) [e.g. 6, 7]. However, SLI cannot account for the production of significant volumes of silicic melt and its wide distribution, as reported by the remote global surveys [1, 2, 3]. In addition, experimental and natural products of SLI show that U and Th, which are abundant in the lunar granites and seen in the remote sensing data of the domes, are preferentially partitioned into the depolymerized ferrobasaltic magma and not the silicic portion [8, 9]. If SLI is not the mechanism that generated silicic magmas on the Moon then alternative processes such as fractional crystallization (only crystal-liquid separation) or partial melting should be considered as viable possibilities to be tested.

Mills, Ryan D.↗
DOE OSTI2024

Wellbore cement alteration and roles of CO 2 and shale during underground hydrogen storage

To mitigate climate change and adopt renewable energy, energy storage is crucial and can be done in the form of hydrogen gas (H 2 ). Subsurface geologic reservoirs are positioned to store H 2 on the largest scales for the longest terms of all potential options. However, H 2 injection may boost reactions that consume hydrogen, generate undesired gases, and alter pore structures of geomedia. To explore the extent of H 2 -associated biotic reactions at a near wellbore location, four experiments were conducted under underground storage conditions with wellbore cement cores and, in most instances, shale samples submerged in synthetic formation brine. Post-reaction gas, aqueous, and solid phase samples were analyzed using olfactory screening and, later, gas chromatography (GC-MS), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM), and synchrotron micro-scale x-ray fluorescence (μ-XRF). Within a period of 16 weeks, hydrogen sulfide (H 2 S) was generated in systems containing both H 2 and shale. XRF mapping identified a zone enriched in iron(II) and reduced sulfur along the rim of cement cross sections that was largely associated with CO 2 -induced cement carbonation. Shale did not show noticeable alteration, but there is evidence it contributed to the initial inoculation of the system and provided nutrients for microbes via water-rock interactions. Here, this study considers both rock formations and wellbore cement not previously evaluated concurrently. Findings support understanding and modeling of H 2 -associated biogeochemical reactions during underground hydrogen storage.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Chemical constraints on the evolution of Archean continental crust

One of the challenges of Archean geochronology is to find isotopic systems that preserve an indication of a rock's primary age in spite of the effects of later metamorphism. Zircon dating has been used widely with considerable success but not without difficulty, especially in polymetamorphic terrains. Zircons in such cases commonly are found to have lost radiogenic Pb, and despite fractionizing the zircons or abrading them to remove disturbed portions; it often is not possible to define a pattern of Pb loss from which the original age can confidently be inferred. The refinement of techniques to enable extremely small samples, or even single crystals, to be analyzed has contributed greatly to solving the problem but even those techniques cannot resolve the micron scale isotopic heterogeneities within single zircons in which much of their history is recorded. That can only be done by ion microprobe. Progress reports on studies of four Archean rocks, each of which illustrates the power and potential of ion microprobe analysis in solving problems of Archean geochronology are discussed.

Weaver, B. L.↗
NASA NTRS1999

Sampling the Old and the New: Landing Site Proposals for the Dichotomy Boundary (6 S,210 W) and the Ares Vallis Headlands (2 S,18 W)

One of the goals of the Mars Pathfinder mission was to sample a diversity of rocks deposited by the Ares and Tiu Vallis floods. It was hoped that ancient highlands and younger lowlands material could be studied, as well as a diversity of rocks within these regions. Although Pathfinder found rocks that exhibited a number of textures and morphologies, several factors precluded the identification of a petrologic suite of rocks, if it was present. Namely among these were 1) The lack of geologic context for the rocks examined, 2) instrument limitations, and 3) pervasive dust and possible weathering finds. Based on the Pathfinder experience and incorporating recent results from Mars Global Surveyor and previous missions, two landing sites are proposed that can potentially overcome this problem and offer samples of ancient and recent Martian rock. The first site is at the dichotomy boundary, where ancient highlands and more recent lowlands meet. The second site is at the Ares Vallis headlands, where some of the source materials for the Pathfinder landing site may have been derived. Both of these sites meet the remote sensing and elevation constraints of the 2001 Lander mission but exhibit significant slopes and potential hazards in places. However, a properly placed ellipse can alleviate much of the concern, thereby offering two exciting sites that otherwise would not be chosen.

Bridges, N. T.↗
DOE OSTI2021

Thermal and Mechanical Energy Performance Analysis of Closed-loop Systems in Hot-Dry-Rock and Hot-Wet-Rock Reservoirs

To understand the potential and limitations for recovering thermal and mechanical energy from closed-loop geothermal systems a collaborative study is underway that will investigate an array of system configurations, working fluids, geothermal reservoir characteristics, operational periods, and heat transfer enhancements. Closed-loop geothermal systems are distinguished from hydrothermal or enhanced geothermal systems (EGS) in that the working fluid only circulates through drilled boreholes. Principal objectives of this study are to determine upper limits for thermal and mechanical energy recovery and optimal operational and configuration parameters for each scenario. Teams of scientists and engineers are applying a suite of numerical simulation and analytical tools to model the heat recovery from closed-loop geothermal systems, and then optimizing operational and configuration parameters to maximize the thermal and mechanical energy recovery. Results from the suite of numerical simulators and analytical tools, such as outlet and inlet states and temperature profiles in the geothermal reservoir over time are intercompared to increase confidence in the analysis. This paper documents the study findings for closed-loop systems in hot-dry-rock and hot-wet-rock reservoirs, where water is the working fluid. The characteristics of the hot-dry-rock reservoir were based on the U.S. Department of Energy's Utah Frontier Observatory for Research in Geothermal Energy (FORGE) site, near Milford Utah. Two objective functions are defined to optimize the operational and configuration parameters of the system, one each for the recovery of mechanical and thermal energy over the period of operation. For both objective functions, a surface plant thermal to mechanical energy conversion factor and an energy drilling cost is required. In keeping with the study objectives the surface plant conversion factor is determined from a second-law of thermodynamics analysis of a generic binary plant, and drilling costs are based on those from the Utah FORGE site and current national electrical costs.

closed-loop geothermal systems↗
DOE OSTI2021

Thermal and Mechanical Energy Performance Analysis of Closed-loop Systems in Hot-Dry-Rock and Hot-Wet-Rock Reservoirs

To understand the potential and limitations for recovering thermal and mechanical energy from closed-loop geothermal systems a collaborative study is underway that will investigate an array of system configurations, working fluids, geothermal reservoir characteristics, operational periods, and heat transfer enhancements. Closed-loop geothermal systems are distinguished from hydrothermal or enhanced geothermal systems (EGS) in that the working fluid only circulates through drilled boreholes. Principal objectives of this study are to determine upper limits for thermal and mechanical energy recovery and optimal operational and configuration parameters for each scenario. Teams of scientists and engineers are applying a suite of numerical simulation and analytical tools to model the heat recovery from closed-loop geothermal systems, and then optimizing operational and configuration parameters to maximize the thermal and mechanical energy recovery. Results from the suite of numerical simulators and analytical tools, such as outlet and inlet states and temperature profiles in the geothermal reservoir over time are intercompared to increase confidence in the analysis. This paper documents the study findings for closed-loop systems in hot-dry-rock and hot-wet-rock reservoirs, where water is the working fluid. The characteristics of the hot-dry-rock reservoir were based on the U.S. Department of Energy’s Utah Frontier Observatory for Research in Geothermal Energy (FORGE) site, near Milford Utah. Two objective functions are defined to optimize the operational and configuration parameters of the system, one each for the recovery of mechanical and thermal energy over the period of operation. For both objective functions, a surface plant thermal to mechanical energy conversion factor and an energy drilling cost is required. In keeping with the study objectives the surface plant conversion factor is determined from a second-law of thermodynamics analysis of a generic binary plant, and drilling costs are based on those from the Utah FORGE site and current national electrical costs.

Closed-loop geothermal systems, hot-dry-rock, hot-↗
DOE OSTI2026

Complex Electrical Conductivity of a Single‐Fractured Rock: Fracture‐and‐Matrix Coupling Mechanism and Aperture Size Predictions

Fractured rocks play a crucial role in myriad natural and engineered systems, including Earth's critical zone, oil/gas/geothermal reservoirs, and geological CO 2 /H 2 /waste storage systems. While complex electrical conductivity is extensively used to estimate the pore and grain sizes of conventional porous rocks and soils, it is rarely used to predict the aperture size of fractured rocks and this remains poorly understood. Here, integrating theory, simulations, and experiments, we show that under external fields, fractured rocks follow the fracture-and-matrix coupling to make the bulk complex conductivity non-linear with respect to water conductivity. We find that the relaxation time and quadrature conductivity for porous media do not apply to fractured rocks, but, instead, reasonably accurate predictions of aperture size can be made based on the true formation factor. This study unravels the fundamental mechanism governing conduction and polarization of fractured rocks and paves the way for the non-invasive investigation of global fractured rocks.

58 GEOSCIENCES↗
DOE OSTI2023

Over-Stoichiometric Metastabilization of Cation-Disordered Rock Salts

Cation-disordered rock salts (DRXs) are well known for their potential to realize the goal of achieving scalable Ni- and Co-free high-energy-density Li-ion batteries. Unlike in most cathode materials, the disordered cation distribution may lead to more factors that control the electrochemistry of DRXs. An important variable that is not emphasized by research community is regarding whether a DRX exists in a more thermodynamically stable form or a more metastable form. Moreover, within the scope of metastable DRXs, over-stoichiometric DRXs, which allow relaxation of the site balance constraint of a rock salt structure, are particularly underexplored. In this work, these findings are reported in locating a generally applicable approach to “metastabilize” thermodynamically stable Mn-based DRXs to metastable ones by introducing Li over-stoichiometry. Further, the over-stoichiometric metastabilization greatly stimulates more redox activities, enables better reversibility of Li deintercalation/intercalation, and changes the energy storage mechanism. The metastabilized DRXs can be transformed back to the thermodynamically stable form, which also reverts the electrochemical properties, further contrasting the two categories of DRXs. This work enriches the structural and compositional space of DRX families and adds new pathways for rationally tuning the properties of DRX cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Assessing the Behavior of Moderately Volatile Elements on the Moon in Order to Constrain Processes of Magmatic Evolution and Planetary Accretion

Heterogeneous isotopic compositions of Zn and Ga in lunar basalts and highlands rocks indicate that secondary processing affected the stable isotopic composition of major lunar reservoirs. It follows that these fractionating processes must be identified and characterized in order to make robust estimates for the isotopic composition of the mare basalt source regions or the bulk silicate Moon (BSM). Contrary to previous assertions (e.g., Kato & Moynier, 2017), MVEs such as Zn and Ga do not behave similarly on the Moon, in line with differences in their chemical behavior and volatility. There is clear evidence that impact reworking fractionates zinc isotopes but, in addition, zinc isotopes are also highly sensitive to the formation of Ti-bearing oxides such as ilmenite. In contrast, gallium is far less susceptible to volatile reworking, but its isotopic composition is fractionated during incorporation into plagioclase (Wimpenny et al., 2022; Render et al., 2023). Based on these findings we conclude that current isotopic compositions of Zn and Ga in lunar rocks, such as those measured for the mare basalt suite, are unlikely to be representative of the bulk Moon when it accreted. As such, estimates for the MVE isotopic composition of the BSM derived from mare basalts may not be accurate, which may have implications for the incorporation of these data into dynamical models of the Moon’s formation. In the following, we discuss the main findings from this project in more detail, focusing on the behaviour of zinc and gallium isotopic systematics in lunar rocks and the processes that control their isotopic fractionation on the Moon.

58 GEOSCIENCES↗
DOE OSTI2024

Permeability and Induced Polarization of Mudstones

Electrical measurements can be used to estimate hydraulic properties such as permeability ( k ) in sedimentary rocks. Previous work has focused on sandstones, siltstones, and carbonates, while investigations on mudstones have rarely been reported. In this study, we report on electrical geophysical measurements for 23 mudstone samples using an experimental approach designed to reliably saturate these low permeability mudstones. The modified Hagen-Poiseuille model linking permeability to the formation factor ( F ) and an effective pore radius ( r ) provides an excellent fit to the data set with a near-constant pore radius, indicating that the effective porosity (1/ F ) is the controlling factor on k . In these samples, the surface area normalized to pore volume ( S por ), frequently used in permeability estimation models, varies by 1–2 orders of magnitude and is thus not a reliable proxy of the inverse effective hydraulic radius. The formation factor also exerts the primary control on induced polarization (IP) parameters, whereas Spor shows no relation to the IP parameters. A strong linear relationship is found between IP parameters (imaginary conductivity and normalized chargeability) and surface conductivity, although the proportionality factor is significantly lower than those observed in more permeable rocks and sediments. Apparent relationships between the polarization strength-derived and time constant-derived geophysical length scales and the effective hydraulic radius appear to be driven by variations in the electrochemical parameters (i.e., specific polarizability and diffusion coefficient). Overall, these findings emphasize that predicting hydraulic properties from electrical measurements in fine-grained rocks remains challenging and requires further investigation into the electrochemical properties involved.

58 GEOSCIENCES↗
DOE OSTI2020

Surface and bulk characterization of reservoir and cap-rocks: Past, present, and future

Geologic formations provide potentially some of the largest volume capacities for CO 2 storage or sequestration. Potential storage sites can be deep saline aquifers, depleted oil reservoirs, and coal seams, surrounded by sealing layers to prevent CO 2 from leaking. It is therefore critical to understand mechanisms contributing to CO 2 trapping and CO 2 leaks. Both phenomena are governed by reactions at the interfaces of the reservoir and cap-rocks and are controlled by the complex chemistry and pore structures of rocks. Mechanisms at the macroscale are affected by the processes occurring at the nanoscale. This review highlights the necessity of multitechnique, multiscale characterization of rocks and points to the importance of surface analysis and surface science studies. Two shale rocks (seals) from Niobrara and Agardhfjellet formations with complex surface chemistry are used as examples throughout the paper. Typically, evaluation of rocks with x-ray diffraction, thermogravimetric analysis, Rock-Eval pyrolysis, gas adsorption, and electron microscopy combined with energy dispersive x-ray spectroscopy is conducted to provide valuable information about the bulk mineralogy, elemental composition, pore volume, and adsorbed species on the sample surface. These studies are necessary prior to designing surface sensitive experiments with x-ray photoelectron spectroscopy (XPS), guiding both sample preparation and sample analysis. XPS has been widely used to study the surface composition of rocks during the investigations of their fine-scale wettability, and the main findings are highlighted here. This paper also reviews the existing literature on ambient-pressure XPS, which provides new opportunities to study in situ chemical alteration due to interactions with CO 2 and offers recommendations for adapting this technique to study rock-fluid interactions, allowing for the identification of fundamental interactions during CO 2 sequestration and guide selection of formation sites for improved storage.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Geochemical Modeling of Celestite (SrSO 4 ) Precipitation and Reactive Transport in Shales

Celestite (SrSO 4 ) precipitation is a prevalent example of secondary sulfate mineral scaling issues in hydraulic fracturing systems, particularly in basins where large concentrations of naturally occurring strontium are present. Herein, we present a validated and flexible geochemical model capable of predicting celestite formation under such unconventional environments. Simulations were built using CrunchFlow and guided by experimental data derived from batch reactors. These data allowed the constraint of key kinetic and thermodynamic parameters for celestite precipitation under relevant synthetic hydraulic fracturing fluid conditions. Effects of ionic strength, saturation index, and the presence of additives were considered in the combined experimental and modeling construction. This geochemical model was then expanded into a more complex system where interactions between hydraulic fracturing fluids and shale rocks were allowed to occur subject to diffusive transport. We find that the carbonate content of a given shale and the presence of persulfate breaker in the system strongly impact the location and extent of celestite formation. The results of this study provide a novel multicomponent reactive transport model that may be used to guide future experimental design in the pursuit of celestite and other sulfate mineral scale mitigation under extreme conditions typical of hydraulic fracturing in shale formations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

RARE EARTH AND CRITICAL ELEMENT RELATIONSHIPS TO COAL DEPOSIT LITHOLOGIES IN SOUTHWEST WYOMING AND NORTHWEST COLORADO

Rare earth elements (REE) and critical minerals (CM) are vital components in a wide variety of applications, not only in the renewable energy sector but also in military, telecommunication, and other civilian uses. The association of REE and CM with coal deposits is widely known but not thoroughly understood. While individual coal samples or beds themselves might not host significant concentrations of REE, recent studies indicate temporal relationships among some REE with coal beds and their immediately adjacent non-coal bounding strata, including interbeds. These strata most commonly include clays, carbonaceous shales, and ash beds, but other related strata are possible in different coal-bearing settings. Variations in REE and CM concentrations and their direct or indirect association with coal beds are not always predictable. This study presents recent findings from studying different associations between coal beds and adjacent rocks to identify possible relationships between REE-CM concentrations and the coals and adjacent rocks. For this study we collected and analyzed several dozen samples from the U.S. Geological Survey’s Core Research Center (CRC). Additionally, a small number of coal mine outcrops and their adjacent non-coal rocks were included. Most samples are of Cretaceous age. Previous work has shown a potential link between coals in the Upper Cretaceous Williams Fork Formation and REE occurrences in the Yampa ash bed in northwest Colorado. While data are uncommon and sparse, this possible link may suggest REE or CM enrichment from leaching or reworking of the ash bed. Trace element geochemistry, whole rock data, and microscopic examinations are used here to explore these relationships and guide future studies.

REE, CM, ash, volcanic ash, coal↗
NASA NTRS2004

Mineralogy, Abundance, and Hydration State of Sulfates and Chlorides at the Mars Pathfinder Landing Site

Detection of elevated concentrations of S and Cl at the landing sites of Viking 1 and 2 [1], and Mars Pathfinder (MP) [2-5] reveals the presence of sulfates and chlorides in soil and rock samples [1-10]. These data are consistent with the findings of Ca sulfates and NaCl in Martian meteorites [11,12], and with Earth-based spectroscopic observations [13,14] tentatively indicating the presence of sulfates on Mars. Although the correlation of S and Mg in Viking and MP samples could reveal the occurrence of Mg sulfate [1-10], the mineralogy of sulfates and chlorides remains unclear.

Zolotov, M. Y.↗
NASA NTRSDate not supplied

Fundamental Regolith Properties, Handling and Water Capture (FLEET) Project Update

The FLEET project, begun in FY21, was designed to research several concepts for components and subsystems needed for extracting water from planetary ice deposits. This is one of two approaches for providing water off-Earth for direct use and also for feedstock to manufacture spacecraft propellants. The other approach is to extract lattice-bound water and hydroxyl from the minerals that make up the solid grains of rock and regolith. The ultimate intent is to integrate the findings with other efforts, such as, in the creation of complete water-from-ice production systems for various down-stream uses. The project consists of several elements, now in various stages of completion. They are presented here in the approximate order they would generally be applied to a water-extraction system: Digging icy regolith, transporting it, capturing water vapor, and sealing chambers from the outer environment.

L Gertsch↗
NASA NTRSDate not supplied

Fundamental Regolith Properties, Handling and Water Capture (FLEET) Update

The FLEET project, begun in FY21, was designed to research several concepts for components and subsystems needed for extracting water from planetary ice deposits. This is one of two approaches for providing water off-Earth for direct use and also for feedstock to manufacture spacecraft propellants. The other approach is to extract lattice-bound water and hydroxyl from the minerals that make up the solid grains of rock and regolith. The ultimate intent is to integrate the findings with other efforts, such as, in the creation of complete water-from-ice production systems for various down-stream uses. The project consists of several elements, now in various stages of completion. They are presented here in the approximate order they would generally be applied to a water-extraction system: Digging icy regolith, transporting it, capturing water vapor, and sealing chambers from the outer environment.

regolith excavation↗