Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotational transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Determination of statistics for any rotation of axes of a bivariate normal elliptical distribution

Transformation of statistics from a dimensional set to another dimensional set involves linear functions of the original set of statistics. Similarly, linear functions will transform statistics within a dimensional set such that the new statistics are relevant to a new set of coordinate axes. A restricted case of the latter is the rotation of axes in a coordinate system involving any two correlated random variables. A special case is the transformation for horizontal wind distributions. Wind statistics are usually provided in terms of wind speed and direction (measured clockwise from north) or in east-west and north-south components. A direct application of this technique allows the determination of appropriate wind statistics parallel and normal to any preselected flight path of a space vehicle. Among the constraints for launching space vehicles are critical values selected from the distribution of the expected winds parallel to and normal to the flight path. These procedures are applied to space vehicle launches at Cape Kennedy, Florida.

Falls, L. W.↗
NASA NTRS2000

Vertical Distributions of PH3 in Saturn from Observations of Its 1-0 and 3-2 Rotational Lines

Far-infrared Fourier-transform spectrometer measurements of the 1-0 and 3-2 PH3 transitions in Saturn's disk near 267 and 800 GHz (8.9 and 26.7/cm), respectively, were analyzed simultaneously to derive a global mean profile for the PH3 vertical mixing ratio between 100 and 600 mbar total pressure. The far-infrared spectrum is relatively free from spectral interlopers, suffers minimal absorption or scattering by atmospheric particulates, and contains intrinsically weak PH3 lines that are sensitive to a range of atmospheric depths. The combined spectra are inconsistent with a uniform tropospheric mixing ratio, even with a stratospheric cut-off. They are consistent with a volume mixing ratio of PH3 that drops from 1.2 x 10(exp -5) at 645 mbar pressure to a value of 4.1 x 10(exp -7) at 150 mbar pressure, a decrease that is linear is log abundance vs log pressure. The mixing ratio could drop even more quickly at atmospheric pressures below 150 mbar and still be consistent with the data. The mixing ratio may well remain constant with depth for pressures above 630 mbar. The maximum PH3 mixing ratio in this model is consistent with a [P]/[H] ratio in the deep atmosphere that is about a factor of 10 higher than solar composition. Such a model is consistent with rapid mixing up to the radiative-convective boundary and transport by, for example, vertical waves just above this boundary. In the best fitting model, the eddy diffusion coefficient is approximately 10(exp 4) sq cm near 630 mbar, and it must increase with altitude. The predominant PH3 loss mechanisms are direct photolysis by UV radiation and scavenging by H atoms produced by the photolysis.

Orton, G. S.↗
NASA NTRS1973

Smithsonian Astrophysical Observatory Reference System Bulletin, no. 1

The reference system is described which involves timing, scale, coordinate systems and their transformations, and observations of the rotation of the earth. Timing (epochs) and STADAT timing corrections are discussed. The coordinates for locations, and MSL height are listed for each observing station.

Source record↗
NASA NTRS1980

Use of multiblade sensors for on-line rotor tip-path plane estimation

Techniques are investigated for on-line estimation of rotor states in the nonrotating frame from multiple, simultaneous measurements in the rotating frame. The multiblade coordinate transformation is first applied to transform both flapping and flapping rate measurements into the nonrotating frame. The 'observer' approach is then used to generate algorithms for estimating tip-path plane rate and attitude from transformed flapping and flapping rate measurements. A numerical evaluation using simulated measurements is conducted to evaluate the performance of the algorithms and recommendations are made.

Du Val, R. W.↗
NASA NTRS1988

System Turns SAR Images Into Maps

Postprocessing system for synthetic-aperture radar (SAR) transforms raw images from natural rotated and distorted SAR reference frame into geocoded images. Images automatically corrected to remove slant-range nonlinearities and Doppler skew. Produces multiple-frame mosaics for large-scale mapping. Does not require tedious manual registration of representative "tie" points in raw SAR imagery with known locations on Earth.

Curlander, J. C.↗
NASA NTRS1981

28-Channel rotary transformer

Transformer transmits power and digital data across rotating interface. Array has many parallel data channels, each with potential l megabaud data rate. Ferrite-cored transformers are spaced along rotor; airgap between them reduces crosstalk.

Mclyman, W. T.↗
NASA NTRS1992

Studies of temporal change using radar interferometry

Decorrelation of the radar signals with time, which is indicative of changes in the surface occurring during the period of time spanned by the images, is examined. It is concluded that the decorrelation effects due to thermal noise can be easily evaluated and removed, while those due to slight angular changes between flight tracks are negligible. Spatial baseline and rotation-induced decorrelation can be derived using the Fourier transform of the impulse response intensity, and increases linearly with baseline or rotation in an ideal system. Empirical results confirm that as the baseline increases, the overall correlation decreases due to spatial baseline noise.

Villasenor, John↗
NASA NTRS1952

Generalization of Boundary-Layer Momentum-Integral Equations to Three-Dimensional Flows Including Those of Rotating System

The Navier-Stokes equations of motion and the equation of continuity are transformed so as to apply to an orthogonal curvilinear coordinate system rotating with a uniform angular velocity about an arbitrary axis in space. A usual simplification of these equations as consistent with the accepted boundary-layer theory and an integration of these equations through the boundary layer result in boundary-layer momentum-integral equations for three-dimensional flows that are applicable to either rotating or nonrotating fluid boundaries. These equations are simplified and an approximate solution in closed integral form is obtained for a generalized boundary-layer momentum-loss thickness and flow deflection at the wall in the turbulent case. A numerical evaluation of this solution carried out for data obtained in a curving nonrotating duct shows a fair quantitative agreement with the measures values. The form in which the equations are presented is readily adaptable to cases of steady, three-dimensional, incompressible boundary-layer flow like that over curved ducts or yawed wings; and it also may be used to describe the boundary-layer flow over various rotating surfaces, thus applying to turbomachinery, propellers, and helicopter blades.

Mager, Arthur↗
NASA NTRS1989

Fitting improved accretion disk models to the multiwavelength continua of quasars and active galactic nuclei

Fits to the ultraviolet-optical-infrared spectra of 60 quasars and active galactic nuclei (AGNs) are investigated, using black hole accretion disk models. The disk is assumed to be geometrically thin and optically thick. The observed spectrum from a black hole accretion disk, rotating (Kerr) or nonrotating (Schwarzschild), is transformed by the geometric inclination effect, Doppler shifts, gravitational redshifts, and gravitational focusing. These effects alter the locally emitted fluxes and produce harder spectra for an observer at higher inclination angles. The relativistic corrections are much more significant in the Kerr geometry since the inner edge of the disk is much closer to the rotating black hole. A simple inverse relation between the inferred black hole mass and the assumed inclination angle was found in the Kerr case, while the inferred accretion rate (solar masses/yr) remains independent of the angle. In the Schwarzschild case, the ratio of the inferred accretion rate to the black hole mass remains roughly constant when the viewing angle changes. In both geometries, low-redshift Seyfert galaxies have relatively low accretion rates, only a few percent of their Eddington luminosities, while the most luminous quasars are accreting near their Eddington limits.

Sun, Wei-Hsin↗
NASA NTRS1982

Non-contacting power transfer device

A transformer for coupling AC electrical energy from a stationary element to a rotating element without the use of sliding contacts is described. The transformer is of the rotary type and includes a ferrite core and two primary windings which are stationary with respect to a seconary winding which rotates within an annular cavity adjacent an axial bore in the core. The core is comprised of two cup type core halves. Electrical connection to the secondary winding is made through a split bobbin assembly which couples to a coaxial shaft assembly located in the axial bore. The electrical coupling to the coaxial shaft assembly is made through a continuous transverse channel connecting the axial bore with the annular cavity. The transverse channel forms a single air gap; however, it is not open directly to free space but is shielded by the magnetic permeable material of the core halves.

Studer, P. A.↗
NASA NTRS1993

Use of Fourier transforms for asynoptic mapping: Applications to the Upper Atmosphere Research Satellite microwave limb sounder

Fourier analysis has been applied to data obtained from limb viewing instruments on the Upper Atmosphere Research Satellite. A coordinate system rotation facilitates the efficient computation of Fourier transforms in the temporal and longitudinal domains. Fields such as ozone (O3), chlorine monoxide (ClO), temperature, and water vapor have been transformed by this process. The transforms have been inverted to provide maps of these quantities at selected times, providing a method of accurate time interpolation. Maps obtained by this process show evidence of both horizontal and vertical transport of important trace species such as O3 and ClO. An examination of the polar regions indicates that large-scale planetary variations are likely to play a significant role in transporting midstratospheric O3 into the polar regions. There is also evidence that downward transport occurs, providing a means of moving O3 into the polar vortex at lower altitudes. The transforms themselves show the structure and propagation characteristics of wave variations.

Elson, Lee S.↗
NASA NTRS2003

Contactless Rotary Electrical Couplings

Rotary electrical couplings based on induction (transformer action) rather than conduction between rotating and stationary circuitry have been invented. These couplings provide an alternative to slip rings and contact brushes. Mechanical imperfections of slip-ring and brush contact surfaces and/or dust particles trapped between these surfaces tend to cause momentary interruptions in electrical contact and thereby give rise to electrical noise. This source of noise can be eliminated in the inductive rotary couplings because no direct contact is necessary for transformer action.

Kumagai, Hiroyuki↗
NASA NTRS1990

Multiple strike slip faults sets: A case study from the Dead Sea transform

In many strike slip tectonic settings, large rotations of crust blocks about vertical axes have been inferred from paleomagnetic data. These blocks are bounded by sets of parallel faults which presumably accommodate the relative motion between the blocks as regional deformation progress. A mechanical model by Nur et al., (1986) suggests that rotations greater than phi sub c equals 25 to 45 degrees must be accommodated by more than one set of faults, with angle phi sub c between their direction; consequently the sum of the angles between sets must be roughly equal to the total tectonic material rotation. To test this model, the authors investigated the fault geometry and field relation of fault sets in the Mt. Hermon area in northern Israel, where paleomagnetic declination implies data 69 degrees plus or minus 13 degrees counter-clockwise block rotation. The statistical and field relation analysis of over 315 faults shows that the faulting is predominantly right lateral strike slip consisting of three distinct sets. The oldest set strikes 253 degrees, the second oldest set strikes 293 degrees and the youngest strikes 339 degrees. This last direction is consistent also with the current north-south direction of the maximum principle stress axis. The angle phi sub c between the first and second sets is 39 degrees and between the second and third sets 46 degrees, in good agreement with the phi sub c angle predicted from mechanical considerations. The sum of the two angles is 85 degrees, in good agreement with the 69 degrees plus or minus 13 degrees CCW paleomagnetically derived rotation. The results suggest specifically that the sequential development of multiple intersecting fault sets is responsible for the faulting in the Mt. Hermon area; and generally that the model of block rotation with multiple faults provides very good simple rules for analyzing very complex fault patterns.

Ron, Hagai↗
NASA NTRS1973

On the theory of group generation of stars

The hypothesis proposed is that topology of a rotating gaseous cloud can be variable in the contraction process. Due to rotation an originally spherical cloud is transformed into a toroidal body. The contraction of a thin torus is considered with different suppositions on cooling the gas. In the determined time the torus will become gravitationally unstable. The excitation of Jeans' waves is shown to result in the disintegration of the torus into fragments. The number of the fragments and their mass distributions are calculated. The proposed hypothesis on toroidal stages in stellar evolution can remove some difficulties in the theory of structure and evolution of stars, such as absence of limitary stars, distribution of rotation velocities of early-type stars, origin of poloidal magnetic fields and decline rotators with the magnetic axis orthogonal to the axis of rotation.

Zhilyayev, B. Y.↗
NASA NTRS2005

Rotational spectroscopy at the Jet Propulsion Laboratory

Environmental monitoring, atmospheric remote sensing and astrophysical studies promoted by NASA require a strong basis of spectroscopic information. The rotational spectroscopy capabilities at NASAs Jet Propulsion Laboratory (JPL) are currently maintained for the measurement of key mission priorities that enable modeling and retrieval of geophysical data from the atmosphere as well as validation of the space-borne instruments in the Earth Observing System, particularly the Microwave Limb Sounder. Rotational spectra are measured using a variety of spectroscopic techniques including pulsed-beam Fourier transform microwave spectroscopy (at CalTech); millimeter wavelength Stark spectroscopy; millimeter, submillimeter and THz FM spectroscopy; laser sideband spectroscopy and Fourier Transform far-infrared spectroscopy. Remote measurements of atmospheric rotational spectra are made using two limb-sounder instruments in the submillimeter and THz. Recent advances in the direct synthesis of THz radiation that enable more efficient laboratory science will be presented. Software for comprehensive and systematic study of different molecular systems is maintained at JPL, the software is freely available via http://spec.jpl.nasa.gov and is used by our group to create and sustain the JPL spectral line catalog also available online.

molecular spectroscopy↗
NASA NTRS1992

Error analysis of optical correlators

With the growing interest in using binary phase only filters (BPOF) in optical correlators that are implemented on magnetooptic spatial light modulators, an understanding of the effect of errors in system alignment and optical components is critical in obtaining optimal system performance. We present simulations of optical correlator performance degradation in the presence of eight errors. We break these eight errors into three groups: 1) alignment errors, 2) errors due to a combination of component imperfections and alignment errors, and 3) errors which result solely from non-ideal components. Under the first group, we simulate errors in the distance from the object to the first principle plane of the transform lens, the distance from the second principle plane of the transform lens to the filter plane, and rotational misalignment of the input mask with the filter mask. Next we consider errors which result from a combination of alignment and component imperfections. These include errors in the transform lens, the phase compensation lens, and the inverse Fourier transform lens. Lastly we have the component errors resulting from the choice of spatial light modulator. These include contrast error and phase errors caused by the non-uniform flatness of the masks. The effects of each individual error are discussed, and the result of combining all eight errors under assumptions of reasonable tolerances and system parameters is also presented. Conclusions are drawn as to which tolerances are most critical for optimal system performance.

Ma, Paul W.↗