Search NASA⌕ Search

SEARCH · Search NASA

Results for “sap flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

84 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Polygenic eruptions on Alba Patera, Mars

A new model for the evolution of the martian volcano Alba Patera is constructed. Numerous digitate channel networks on the flanks of the volcano are interpreted to be carved by sapping due to the release of nonjuvenile water from unconsolidated flank deposits. The particle size of these deposits is estimated to be 3-10 microns, which, together with theoretical modelling of the disperison of explosively derived volcanic materials, leads to the conclusion that the flank deposits on Alba Patera are low-relief pyroclastic flows. The recognition of numerous late-stage summit and subterminal lava flows thus makes Alba Patera a unique martian volcano that is transitional between the older pyroclastic-dominated highland paterae and the more recent effusive central-vent volcanoes such as the Tharsis Montes.

Mouginis-Mark, P. J.↗
NASA NTRS2000

Origin of the Valley Networks On Mars: A Hydrological Perspective

The geomorphology of the Martian valley networks is examined from a hydrological perspective for their compatibility with an origin by rainfall, globally higher heat flow, and localized hydrothermal systems. Comparison of morphology and spatial distribution of valleys on geologic surfaces with terrestrial fluvial valleys suggests that most Martian valleys are probably not indicative of a rainfall origin, nor are they indicative of formation by an early global uniformly higher heat flow. In general, valleys are not uniformly distributed within geologic surface units as are terrestrial fluvial valleys. Valleys tend to form either as isolated systems or in clusters on a geologic surface unit leaving large expanses of the unit virtually untouched by erosion. With the exception of fluvial valleys on some volcanoes, most Martian valleys exhibit a sapping morphology and do not appear to have formed along with those that exhibit a runoff morphology. In contrast, terrestrial sapping valleys form from and along with runoff valleys. The isolated or clustered distribution of valleys suggests localized water sources were important in drainage development. Persistent ground-water outflow driven by localized, but vigorous hydrothermal circulation associated with magmatism, volcanism, impacts, or tectonism is, however, consistent with valley morphology and distribution. Snowfall from sublimating ice-covered lakes or seas may have provided an atmospheric water source for the formation of some valleys in regions where the surface is easily eroded and where localized geothermal/hydrothermal activity is sufficient to melt accumulated snowpacks.

Gulick, Virginia C.↗
NASA NTRS1992

Channels and valley networks

Attention is given to Martian channels and valley networks, since they have become a principal element of evidence to the effect that the Martian atmosphere evolved from an early volatile-rich state to its present condition. The outflow channels are relatively young, later Hesperian or Amazonian in age. They formed by immense outbursts of fluid from subsurface sources. Complexity in outflow-channel morphology was generated by varying amounts of sediment and ice in the aqueous-fluid flow systems. The overall cataclysmic-flood morphology may thus be locally transitional to morphologies generated by ice and debris flowage. Although local areas of valley networks, such as on Alba Patera, formed coevally with outflow channel activity, regionally extensive networks dominate in the heavily cratered terrains. The morphology of many valleys suggests genesis by ground-water sapping; for some valleys, surface runoff may have been more important.

Baker, Victor R.↗
NASA NTRS1993

Early Mars: The inextricable link between internal and external influences on valley network formation

The conditions under which the valley networks on the ancient cratered terrain on Mars formed are still highly debated within the scientific community. While liquid water was almost certainly involved, the exact mechanism of formation is uncertain. The networks most resemble terrestrial sapping channels, although some systems exhibit a runoff-dominated morphology. The major question in the formation of these networks is what, if anything, do they imply about early Martian climate? There are typically two major theories advanced to explain the presence of these networks. The first is that higher internal regolith temperatures, associated with a much higher heat flow 3.8 b.y. ago, would cause ground water to be closer to the surface than at present. Just how close to the surface ground water would have to exist in order to form these valley networks has recently been questioned. The second major theory is that early Mars had a much thicker atmosphere than at present, and an enhanced atmospheric greenhouse may have increased surface temperatures to near the freezing point of water. While recent calculations indicate that CO2 alone could not have produced the needed warming, the presence of other greenhouse gases may have contributed to surface warming.

Postawko, S. E.↗
DOE OSTI2024

How to Turn Jets into Cylinders near Supermassive Black Holes in 3D General Relativistic Magnetohydrodynamic Simulations

Abstract Accreting supermassive black holes (SMBHs) produce highly magnetized relativistic jets that tend to collimate gradually as they propagate outward. However, recent radio interferometric observations of the 3C 84 galaxy reveal a stunning, cylindrical jet already at several hundred SMBH gravitational radii,r≳ 350r g . We explore how such extreme collimation emerges via a suite of 3D general relativistic magnetohydrodynamic simulations. We consider an SMBH surrounded by a magnetized torus immersed in a constant-density ambient medium that starts at the edge of the SMBH sphere of influence, chosen to be much larger than the SMBH gravitational radius,r B = 10 3 r g . We find that radiatively inefficient accretion flows (e.g., M87) produce winds that collimate the jets into parabolas near the black hole. After the disk winds stop collimating the jets atr≲r B , they turn conical. Once outsider B , the jets run into the ambient medium and form backflows that collimate the jets into cylinders some distance beyondr B . Interestingly, for radiatively efficient accretion, as in 3C 84, the radiative cooling saps the energy out of the disk winds; at early times, they cannot efficiently collimate the jets, which skip the initial parabolic collimation stage, start out conical near the SMBH, and turn into cylinders already atr≃ 300r g , as observed in 3C 84. Over time, the jet power remains approximately constant, whereas the mass accretion rate increases; the winds grow in strength and start to collimate the jets, which become quasi-parabolic near the base, and the transition point to a nearly cylindrical jet profile moves outward while remaining insider B .

Astronomy & Astrophysics↗
NASA NTRS1987

Part 1: The geomorphic evolution of Eastern Margaritifer Sinus, Mars

Geomorphic mapping, crater counts on selected surfaces, and a detailed study of drainage basins, were used to trace the geologic evolution of Margaritifer Sinus Quandrangle. The oldest dated surface covering these basins evolved during the period of intense bombardment. Since that time four resurfacing events have occurred. The first three were all of regional extent, while the fourth, occurred locally, filling basins. Valley networks, incised in the third event unit, are always buried by the fourth event unit when present. A peak in geomorphic activity occurred from 10,000 to 5000. Events during this period included the formation of Uzboi/Ladon Valles with deposition in Ladon Basin, and the formation of Samara and Parana/Loire Valles in MC19SE. Flow out of Ladon Basin and to a lesser extent Samara and Parana/Loire Valles created etched terrain at their confluence that was synchronous with initiation of Margaritifer and Iani Chaos. The range of dates for the chaos may be due to periodic collapse. The extensive, well integrted nature of Samara and Parana/Loire Valles requires the existence of a long period of favorable climatic conditions to allow their formation. Development of these two systems was probably through sapping processes.

Grant, John A., III↗
NASA NTRS2010

The Interaction of Impact Melt, Impact-Derived Sediment, and Volatiles at Crater Tooting, Mars

We are producing a 1:200K geologic map of Tooting crater, Mars. This work has shown that an incredible amount of information can be gleaned from mapping at even larger scales (1:10K 1:25K) using CTX and HiRISE data. We have produced two new science papers (Morris et al., 2010; Mouginis-Mark and Boyce, 2010) from this mapping, and additional science questions continue to arise from our on-going analysis of Tooting crater: 1) What was the interplay of impact melt and volatile-rich sediments that, presumably, were created during the impact? Kieffer and Simonds [1980] predicted that melt would have been destroyed during impacts on Mars because of the volatiles present within the target we seek to understand if this is indeed the case at Tooting crater. We have identified pitted and fractured terrain that formed during crater modification, but the timing of the formation of these materials in different parts of the crater remains to be resolved. Stratigraphic relationships between these units and the central peak may reveal deformation features as well as overlapping relationships. 2) Morris et al. [2010] identified several lobate flows on the inner and outer walls of Tooting crater. It is not yet clear what the physical characteristics of the source areas of these flows really are; e.g., what are the sizes of the source areas, what elevations are they located at relative to the floor of the crater, are they interconnected, and are they on horizontal or tilted surfaces? 3) What were the details of dewatering of the inner wall of Tooting crater (Fig. 1)? We find evidence within Tooting crater of channels carved by water release, and the remobilization of sediment (which is inferred to have formed during the impact event). Sapping can be identified along the crest of unit 8 near the floor of the crater (Fig. 2a, 2b). This unit displays amphitheater-headed canyons that elsewhere on Mars are typically attributed to water leaking from the substrate [Laity and Malin, 1985; Malin and Edgett, 2000].

Mouginis-Mark, P.↗
DOE OSTI2021

Soil Sampling Results for Closure of a Portion of Solid Waste Management Unit #16

The U.S. Department of Energy/National Nuclear Security Administration (DOE/ NNSA) and National Technology & Engineering Solutions of Sandia, LLC (NTESS), the management and operating contractor for Sandia National Laboratories/California (SNL/CA), has prepared this soil sampling results report for closure of a portion of Solid Waste Management Unit (SWMU) #16. The entire network of SNL/CA sanitary sewer lines, including building laterals, was identified as SWMU #16 under a Resource Conservation and Recovery Act (RCRA) Facility Assessment conducted for SNL/CA in April 1991 (DOE 1992). Along with the previous SWMU #16 investigation results (SNL/CA 2019), the results of this investigation are intended to support closure decisions by the San Francisco Bay Regional Water Quality Control Board (RWQCB), as discussed below. SNL/CA personnel completed upgrading its sanitary sewer discharge network in 2019. These upgrades included installing new sections of underground lines and decommissioning certain sections of the old piping system by capping in place. To date, several sections of the sewer line have been abandoned-in-place by capping as new sewer lines were installed or flow was rerouted to other existing lines. To formally close these abandoned sections of the sewer line, the RWQCB required that SNL/CA personnel collect soil samples to be analyzed for contaminants potentially released from the sewer lines. SNL/CA personnel hired Weiss Associates (Weiss) of Emeryville, California to prepare a sampling and analysis plan, implement the sampling plan and report the results of the investigation under Purchase Order #2166257. The Sampling and Analysis Plan for Partial Closure of Solid Waste Management Unit #16 (SAP) was submitted to the RWQCB on August 14, 2020 by Weiss on behalf of SNL/CA. The RWQCB approved the SAP on September 30, 2020 after Weiss updated the method detection limit and reporting limits for total polychlorinated biphenyls (PCBs) and individual aroclors. Soil sampling was conducted in accordance with the SAP except that fewer locations were sampled due to site constraints, as discussed below. This report presents the results of the sampling effort and documents all associated field activities including borehole clearing, soil sample collection, storage and transportation to the analytical laboratories, borehole backfilling and surface restoration, and storage of investigation-derived waste (IDW) for future profiling and disposal by SNL/CA waste management personnel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2021

Tonlé Sap Food Security and Agriculture: Evaluating the Effects of Land Use and Hydrological Change on Ecosystem Vitality using Remotely-Sensed Data in the Tonlé Sap Lake Basin

Tonlé Sap Lake, the largest lake in Southeast Asia, is a critical source of fish and freshwater resources for the region. The health of this freshwater system is under pressure from accelerating dam construction, intensifying agriculture, deforestation, and changing climate patterns, forcing tradeoffs between immediate food security and the long-term vitality and productivity of the ecosystem. Efficient freshwater system monitoring is crucial to navigating these challenges. In collaboration with Conservation International, the Cambodian Ministry of Water Resources and Meteorology, and the Tonlé Sap Authority, we developed and tested remotely-sensed proxies for sub-indicators of the Freshwater Health Index (FHI), which is typically calculated using in situ datasets. We used landcover datasets derived from Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), PROBA-V Vegetation sensor (VGT), Sentinel-2 Multispectral Imager (MSI), Advanced Very High Resolution Radiometer (AVHRR), and Envisat Medium Resolution Imaging Spectrometer (MERIS) as inputs to calculate land cover naturalness and bank modification. Additionally, we created a lake-level time series using a collection of altimetry data sources to estimate deviation from natural flow. We observed a decrease in landcover naturalness and a breakdown in the volume and regularity of annual lake levels from 2000-2020, reflecting increased pressure on water supply and agricultural productivity. At least 8% of forested areas in the basin were lost and rice harvest intensity increased over the course of the study period. These results will help our partners make informed decisions regarding freshwater management. Furthermore, our remotely-sensed FHI analysis can be replicated in other regions, providing decision makers with a snapshot of freshwater health in data-scarce environments.

Marco Vallejos↗
NASA NTRS2021

Tonlé Sap Food Security and Agriculture II: Evaluating Changes in Ecosystem Vitality and Freshwater Healthin the Tonlé Sap Basin using Remotely Sensed Data

The Tonlé Sap Lake and river basin in central Cambodia provide critical ecosystem services to the region, including fisheries, agricultural irrigation, hydropower, and biodiverse habitats. Deforestation, increased pumping for farming, and effects of climate change such as droughts and forest fires threaten the health of the lake and food security in the region. This project built upon the previous term through a partnership with Conservation International (CI), the Cambodian Ministry of Water Resources and Meteorology, and the Tonlé Sap Authority to assess ecosystem vitality and implement CI’s Freshwater Health Index (FHI) tool, in an effort to prioritize resource expenditure and highlight areas of concern. Due to the COVID-19 pandemic and related travel restrictions, partners had not been able to readily collect in situ data for the past year, which make up the majority of FHI inputs. To help fill this data gap, we developed a methodology for using Gravity Recovery and Climate Experiment (GRACE) satellite data to calculate groundwater storage depletion, and a Python Application Programming Interface for processing and formatting remotely-sensed data for the Soil and Water Assessment Tool (SWAT) model. We then used SWAT to model nutrient flows and of phosphorous, nitrogen and suspended sediments amounts in the basin from October 2000 to December 2020. These outputs served as inputs for the FHI and provided policy makers with robust monitoring information to aid decision-making in the area and safeguard the lake’s vital fisheries and biodiversity.

Justine Spore↗
DOE OSTI2022

Impacts of Riparian and Non-riparian Woody Encroachment on Tallgrass Prairie Ecohydrology

Woody encroachment has impacted grassland ecohydrology worldwide, prompting management strategies aimed at woody vegetation removal to prevent or mitigate loss of water yield. For this work, we measured stream discharge following sustained cutting of riparian trees (2010–2020) in a native tallgrass prairie (northeastern Kansas, USA). Discharge has declined at this site since the 1980’s despite a concurrent increase in precipitation. This decline has been previously attributed to increased transpiration of stream water by riparian vegetation. We used water stable isotopes (δ 18 O and δ 2 H) to determine whether riparian grasses, shrubs, and trees primarily used stream/groundwater or soil water. Additionally, we quantified the increase in riparian and non-riparian woody cover (1978–2020) and combined it with sap-flux data to estimate changes in transpirative water loss. Sustained cutting of riparian trees did not result in increased discharge. Rather than stream/groundwater, the largest proportion of water used by riparian trees (Quercus spp.) was deep soil water. Cornus drummondii (clonal woody shrub) used a higher proportion of stream water and had greater overall variability in water-use. Riparian shrub cover increased about 57% from 1978 to 2020. Over the same time period, shrub cover increased about 20% in areas outside the riparian zone, resulting in an estimated 25% increase in daily transpirative water loss. Although stream water use was less than 50% for all riparian zone species, the total increase in shrub cover on this watershed, coupled with higher transpiration rates of shrubs, suggests that these woody species—within and outside the riparian zone—are key contributors to observed declines in stream flow in this system.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

Pulsed Fission-Fusion (PuFF)

In September 2013 the NASA Innovative Advanced Concept (NIAC) organization awarded a phase I contract to the PuFF team. Our phase 1 proposal discussed a pulsed fission-fusion propulsion system that injected gaseous deuterium (D) and tritium (T) as a mixture in a column, surrounded concentrically by gaseous uranium fluoride (UF6) and then an outer shell of liquid lithium. A high power current would flow down the liquid lithium and the resulting Lorentz force would compress the column by roughly a factor of 10. The compressed column would reach criticality and a combination of fission and fusion reactions would occur. The fission reactions would further energize the fusion center, and the fusion reactions would generate neutrons that promote more complete burnup of the fission fuel. The lithium liner provides some help as a neutron reflector but also acts as a propulsive medium, being converted to plasma which is then expanded against a magnetic nozzle for thrust. The expansion of the (primarily) lithium plasma against the nozzle's magnetic field inducts a current that is used to charge the system for the next pulse. Our concept also included secondary injection of a Field Reversed Configuration (FRC) plasmoid that would provide a secondary compression direction, axially against the column, and push the column away from the injection manifold, increasing the manifold's survivability.Our phase 1 proposal included modeling the above process first under steady state assumptions and second under a time variant integration. We proposed including these results into a Mars concept vehicle and finally proposing promising conditions to be evaluated experimentally in Phase II. In phase I we quickly realized that we needed to modify our approach. Our steady state work was completed as proposed, and the results indicated that one, a two stage compression system was not needed and two, that we wanted to move away from UF6. The steady state model shows much more margin than expected, to the point that we may well reach breakeven with the Charger – 1 facility, a 572 kJ Marx bank currently under refurbishment at UAH. Additionally we found that using gaseous D-T and UF6, provided a relatively simple prospect of using a pulsed injector, made reaching criticality more difficult. The introduction of large amounts of fluorine meant a radiative sink, sapping power from the fusion plasma and was harder to handle. Therefore we moved to a solid uranium target that held D-T under pressure. In so doing we could move our target closer to criticality and remove any material that did not sustain the reaction.

Fusion↗