Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Green solid-state chemical synthesis and excellent xylene-detecting behaviors of Y-doped α-MoO{sub 3} nanoarrays

Graphical abstract: Y-doped α-MoO{sub 3} arrays constructed by nanorods are firstly synthesized by facile two-step solid-state chemical reaction, which exhibited excellent xylene-sensing property. - Highlights: • The Y-doped α-MoO{sub 3} nanoarrays constructed by nanorods were simply synthesized by solid-state chemical reaction. • The α-MoO{sub 3} arrays exhibited excellent gas-sensing properties for xylene. • This study is helpful to explore the xylene gas-sensitive materials with good comprehensive performance. - Abstract: Y-doped α-MoO{sub 3} nanoarrays constructed by nanorods were simply synthesized by a facile and simple two-step solid-state chemical reaction. X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were applied to characterize the micro-structures and surface chemical composition of the as-prepared products. The results suggested that Y element had been successfully doped into the α-MoO{sub 3} nanoarrays. The gas-sensing behaviors of Y-doped nanoarrays toward seven kinds of harmful gases were also investigated. The results indicated that the Y-doped α-MoO{sub 3} nanoarrays display not only an improved response (the response value reaches 28.3 to 100 ppm xylene), but also an excellent selectivity to xylene. The good xylene-detecting behaviors were attributed to smaller size and the relative larger surface area. Furthermore, the doping of Y increased the electron donor defects and oxygen vacancies, which accelerated the mobility of oxygen ions and enhanced the conductivity of material, resulting in enhanced response to xylene.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Surfactant-free synthesis of m-BiVO4 nanoribbons and enhanced visible-light photocatalytic properties

Highlights: • m-BiVO{sub 4} nanoribbons were synthesized by solvothermal route. • m-BiVO{sub 4} exhibited enhanced photocatalytic activity and stable recyclability. • The superior performance can be ascribed to the low band gap, high surface area and unique morphology. - Abstract: Monoclinic Bismuth vanadate (m-BiVO{sub 4}) is a promising material for photocatalytic degradation of organic moieties. Uniform m-BiVO{sub 4} nanoribbons were synthesized by facile solvothermal route without using the surfactant and characterized by X-ray diffraction, scanning electron microscopy and UV–vis diffuse reflectance spectra technique. The obtained m-BiVO{sub 4} nanoribbons possess well defined 1-D architectures with homogenous morphology and surface area of 22.4 m{sup 2}/g. The prepared photocatalyst showed efficient photocatalytic activities up to 97% in 30 min against the degradation of methylene blue (MB) under visible-light irradiation. The prepared photocatalyst is recyclable and showed a very small change in activity after three consecutive cycles. This higher activity can be attributed to higher surface area and crystallinity, which signify the promising commercial application of m-BiVO{sub 4} nanoribbons as highly novel and highly efficient photocatalyst for the degradation of organic pollutants.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Synthesis of GaN:ZnO solid solution by solution combustion method and characterization for photocatalytic application

GaN-ZnO solid solution has emerged as a successful and reproducible photocatalyst for overall water splitting by one-step photoexcitation, with a bandgap in visible region. When the solid solution is formed, some of the Zn and O ions are replaced by Ga and N ions respectively and there is a narrowing of bandgap which is hypothesized as due to Zn3d-N2p repulsion. The traditional method of synthesis of GaN-ZnO solid solution is by nitridation of the starting oxides under constant ammonia flow. Here we report a solution combustion technique for the synthesis of the solid solution at a temperature about 500 ° C in a muffle furnace with metal nitrates as precursors and urea as the fuel. The as prepared samples showed change in color with the increased concentration of ZnO in the solution. The structural, microstructural, morphological and optical properties of the samples were realized by Powder X ray diffraction, Scanning electron microscopy, Energy dispersive X ray analysis, Transmission electron microscopy and Photoluminescence. Finally the hydrogen production efficiency of the GaN-ZnO nanopowders by water splitting was found, using methanol as a scavenger. The apparent quantum yield (AQY) of 0.048% is obtained for GaN-ZnO solid solution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Optical and electrical properties of Cu-based all oxide semi-transparent photodetector

Zero-bias operating Cu oxide-based photodetector was achieved by using large-scale available sputtering method. Cu oxide (Cu{sub 2}O or CuO) was used as p-type transparent layer to form a heterojunction by contacting n-type ZnO layer. All metal-oxide materials were employed to realize transparent device at room temperature and showed a high transparency (>75% at 600 nm) with excellent photoresponses. The structural, morphological, optical, and electrical properties of Cu oxides of CuO and Cu{sub 2}O are evaluated in depth by UV-visible spectrometer, X-ray diffraction, scanning electron microscopy, atomic force microscopy, Kelvin probe force microscopy, and Hall measurements. We may suggest a route of high-functional Cu oxide-based photoelectric devices for the applications in flexible and transparent electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Structural and Phase Transformations in Alloys during Spark Plasma Sintering of Ti + 23.5 at % Al + 21 at % Nb Powder Mixtures

We have studied the effect of sintering temperature on the structural and phase transformations of alloys produced by the spark plasma sintering of Ti + 23.5 at % Al + 21 at % Nb powder mixtures at temperatures in the range 1100–1550°C. The sintered alloys have been characterized by X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy (elemental X-ray mapping). The alloys sintered at temperatures of 1100 and 1200°C have been shown to have a nonuniform microstructure. According to electron microscopy results, the alloys consist of grains of the α{sub 2} and Nb{sub 2}Al phases and small precipitates of the O-phase (intermetallic compound Ti{sub 2}AlNb). In addition, there are particles of unreacted niobium and titanium. The alloys sintered at a temperature of 1300°C have a uniform lamellar structure.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Synthesis of Hybrid Materials Based on Iron Nanoparticle-Decorated Multiwalled Carbon Nanotubes

Fe-containing nanoparticles have been grown for the first time on the surface of multiwalled carbon nanotubes by metalorganic chemical vapor deposition using iron acetylacetonate, Fe(acac){sub 3}, as a precursor. The resultant hybrid nanomaterial has been characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and thermogravimetric analysis. The results demonstrate that the synthesized material consists of multiwalled carbon nanotubes whose surface is decorated with iron nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Study on Microwave Performance of Low-Temperature Sintered, Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19} Ferrite for Application at UHF Frequency

M-type barium ferrite, Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19}, was synthesized via the solid-state reaction method. BBSZ, i.e., B{sub 2}O{sub 3} −Bi{sub 2}O{sub 3} −SiO{sub 2} −ZnO, was added to adjust the sintering temperature to values lower than that of silver (i.e., ∼961 °C). The phase formation characteristics, microstructure, magnetic, and microwave properties were characterized by x-ray diffraction, scanning electron microscope, vibrating sample magnetometer, and impedance analyzer, respectively. The results show that densification of samples were enhanced by increasing the amount of BBSZ with corresponding gains realized in magnetic properties. Such enhanced properties in Ba(CoTi){sub 1.5}Fe{sub 9}O{sub 19} are attributed to the low-melting point experienced as the result of BBSZ glass additives which gave rise to the stabilization of a liquid phase during sintering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Characterization and Integrated Fabrication of Al Components with Thick TiC{sub p}/Al Composite Coatings via Self-Propagating Reaction

A novel and quick process combining self-propagating reaction with vacuum-expendable pattern casting is presented to accomplish integrated preparation of millimeter-thick TiC{sub p}/Al composite coatings on the Al substrate. Titanium and graphite powders were mixed with the polytetrafluoroethylene (PTFE) additive and pasted on the expendable polystyrene (EPS) followed by compaction. Al components with in situ TiC{sub p}/Al composite coating were simultaneously synthesized at a relatively low temperature of molten Al, which was poured into the assembly of EPS and powder compact inside the silica sands. Differential scanning calorimetry, x-ray diffraction, scanning electron microscopy with energy-dispersive spectroscopy and transmission electron microscopy were used to systematically investigate the thermodynamic characteristics of the reaction, the phase constituents, microstructure and tribological properties of the coatings. The infiltration model describing the densification of the reaction coatings was also developed for the critical wetting condition. The wear characteristics were assessed using a pin-on-disk tribometer with various loads. Results showed that uniform TiC particles stimulated by the PTFE-activated self-propagating reaction afforded superior mechanical properties and wear resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Microstructural characteristics of σ phase and P phase in Ru-containing single crystal superalloys

Microstructural instability caused by topologically close-packed (TCP) phase precipitation restricts the useful compositional range of advanced Ni-base single crystal superalloys in industrial applications. Limited systematic investigations of TCP formers (Cr and Mo) additions on microstructural evolution of both the σ phase and the P phase in Ru-containing single crystal superalloys have been reported. In this study, the microstructural characteristics of σ phase and P phase were investigated in three Ru-containing superalloys with different levels of Cr and Mo additions at 950 °C and 1100 °C by using phase extraction, X-ray diffraction, scanning electron microscope and high resolution transmission electron microscopy. The experimental results indicated that the high level additions of Cr and Mo promoted the formation of σ phase and P phase, respectively. The amount of σ phase was much higher than that of P phase after long term exposure at 950 °C and 1100 °C. The sheet-like σ phase existed in the alloy with higher Cr addition after thermal exposure at 950 °C and 1100 °C for 1000 h, while the needle-like P phase precipitated in high Mo content alloy after thermal exposure at 1100 °C for 1000 h and the intergrowth of σ phase and P phase was observed after thermal exposure at 950 °C for 500 h. Both the σ phase and P phase were enriched in Re, W, Cr and Mo, but the σ phase contained more Re and Cr while the P phase contained more Mo and Ni, and Ru was found in both phases. The nucleation of σ phase was much easier than P phase due to the more ledge steps in the interfacial structure between σ phase and matrix, as well as the higher partitioning ratios of Re, Cr and Mo. This study is helpful to understand the microstructural evolution of σ phase and P phase, and to optimize the alloy design in Ru-containing superalloys. - Highlights: •Microstructures of σ phase and P phase were characterized in detail. •Cr and Mo influenced the precipitation of σ phase and P phase, respectively. •Partitioning ratios and interfacial relationship decided precipitation behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Near white light emitting ZnAl{sub 2}O{sub 4}:Dy{sup 3+} nanocrystals: Sol–gel synthesis and luminescence studies

Highlights: • ZnAl{sub 2}O{sub 4}:Dy{sup 3+} spinel synthesized using sol–gel method. • Characterized by XRD, SEM and PL spectroscopy. • Investigations of emission, excitation and lifetime properties. • Evaluation of defect centers and trap parameters of the system. • Evaluation of CIE indices of near white light emitting phosphor. - Abstract: ZnAl{sub 2}O{sub 4}:Dy{sup 3+} nanoparticles were synthesized using citrate sol–gel method and characterized systematically using X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy. Emission spectrum of pure ZnAl{sub 2}O{sub 4} shows intense violet blue emission under ultra violet irradiation. Based on electron paramagnetic resonance (EPR) results; it was attributed to presence of singly ionized oxygen vacancy centres in ZnAl{sub 2}O{sub 4}. On doping Dy{sup 3+} in ZnAl{sub 2}O{sub 4}, complete host–dopant energy transfer does not take place. Local structural investigation and lifetime measurements reveal that dysprosium ion is distributed between both Zn{sup 2+} and Al{sup 3+} sites. Near white light from ZnAl{sub 2}O{sub 4}:Dy{sup 3+} is attributed to combined host and dopant luminescence. The trap parameters such as activation energy (E) and frequency factor (s) for TSL glow peak 165 °C were determined using different heating rate method. Thermally stimulated emission showed the presence of oxygen related defect centre.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Composite electrolytes ceramic Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}/glassy Li{sub 2}O-Y{sub 2}O{sub 3}-SiO{sub 2}

Highlights: • We synthesized Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}-x wt% 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} (x = 1–10) composites. • Density of the composite samples is higher than one of the sintered Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. • The composition with x = 5 has high total conductivity, 2.5 × 10{sup −5} S cm{sup −1} at 25 °C. - Abstract: We have investigated the effect of lithium yttrium-silicate glass 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} on the density and total conductivity of tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}. An optimal sintering temperature (1200 °C) was selected on the basis of a composite with 1 wt% of the glass having the highest density and total conductivity after annealing at this temperature. A series of composites Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}-x wt% 40.2Li{sub 2}O·5.7Y{sub 2}O{sub 3}·54.1SiO{sub 2} (x = 1–10) was prepared. The samples were characterized by X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. The data revealed that the sintering additive interacted with Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, causing the glass to crystallize during annealing. The conductivity of the composites was studied using complex impedance spectroscopy over a temperature range of 20–250 °C. The composite with x = 5 exhibited the highest total conductivity at room temperature: 2.5 × 10{sup −5} S cm{sup −1}.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Ti3+-TiO2/Ce3+-CeO2 Nanosheet heterojunctions as efficient visible-light-driven photocatalysts

Highlights: • A novel Ti{sup 3+}-TiO{sub 2}/Ce{sup 3+}-CeO{sub 2} nanosheet heterojunction is fabricated. • It owns the bandgap of 2.6 eV and extends the photoresponse to visible light region. • It exhibits excellent visible-light-driven photocatalytic performance. • It is due to synergy of Ti{sup 3+}, Ce{sup 3+} co-doping and nanosheet heterojunction. - Abstract: Novel Ti{sup 3+}-TiO{sub 2}/Ce{sup 3+}-CeO{sub 2} nanosheet heterojunctions are successfully prepared via a facile hydrothermal approach combined with a wet-chemical deposition precipitation and an in situ solid-state chemical reduction strategy. The structures of the as-prepared samples are characterized in detail by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and UV–vis diffuse reflectance spectroscopy. The results show that Ti{sup 3+} and Ce{sup 3+} are both doped into the lattice of TiO{sub 2} and CeO{sub 2}, respectively, which narrow the band gap to 2.7 eV and extend the photoresponse to visible light region. The photocatalytic degradation rate of methyl orange and methylene blue are as high as 93.3% and 97.1% under visible-light illumination, respectively. The high degradation rate is attributed to the efficient doping of Ti{sup 3+} and Ce{sup 3+}, formation of surface oxygen vacancy and heterojunction, which favors the absorption of visible light and separation of photogenerated charge carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Electrochemical synthesis of p-Cu{sub 2}O/n-ZnO nanorods hetero-junction for photovoltaic application

Development of high performance visible light responsive solar cell materials has attracted wide interest due to their potential applications in the energy industries. In this work, ZnO nanorods films were successfully prepared on the ITO coated glass substrates via simple three electrode electrochemical deposition route. The Cu{sub 2}O nanoparticles were then electrodeposited on the surface of ZnO nanorods to form p-Cu{sub 2}O/n-ZnO core-shell hetero-structure. The synthesized ZnO, Cu{sub 2}O films and p-Cu{sub 2}O/n-ZnO hetero-structure were characterized by low angle x-ray diffraction, scanning electron microscopy, and UV-Visible spectrophotometer. Due to the hierarchical morphologies and core-shell structure, p-Cu{sub 2}O/n-ZnO hetero-structure shows a prominent visible-light-driven photocatalytic performance under the low intensity light irradiation. The obtained results suggest that it is possible to synthesize ZnO nanorods, Cu{sub 2}O films and p-Cu{sub 2}O/n-ZnO core-shell hetero-structure by a simple, cost effective and environment friendly electrodeposition process which can be useful for water splitting and solar cell device fabrication.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Urchin-like artificial gallium oxide nanowires grown by a novel MOCVD/CVD-based route for random laser application

A novel procedure based on a two-step method was developed to obtain β-Ga{sub 2}O{sub 3} nanowires by the chemical vapor deposition (CVD) method. The first step consists in the gallium micro-spheres growth inside a metal-organic chemical vapor deposition environment, using an organometallic precursor. Nanoscale spheres covering the microspheres were obtained. The second step involves the CVD oxidization of the gallium micro-spheres, which allow the formation of β-Ga{sub 2}O{sub 3} nanowires on the micro-sphere surface, with the final result being a nanostructure mimicking nature's sea urchin morphology. The grown nanomaterial is characterized by several techniques, including X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, and photoluminescence. A discussion about the growth mechanism and the optical properties of the β-Ga{sub 2}O{sub 3} material is presented considering its unknown true bandgap value (extending from 4.4 to 5.68 eV). As an application, the scattering properties of the nanomaterial are exploited to demonstrate random laser emission (around 570 nm) when it is permeated with a laser dye liquid solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Study of the physical properties of CuS thin films grown by SILAR method

CuS thin films were obtained using the SILAR method on an amorphous glass substrate. All experiments were performed at room temperature. CuS thin films were deposited at 30, 40, 50 and 60 cycles, respectively. Structural, morphological and optical properties of the structures that increase the thickness of nanostructured CuS thin films were investigated. X-ray diffraction, scanning electron microscopy, atomic force microscopy, RAMAN and optical absorption measurements were carried out in order to examine the physical properties of CuS thin films. As a result of the analysis, we can say that the thickness increase positively affects the crystal structure of CuS thin films. In addition, the energy bandgap range of CuS thin films ranged from 2.22 to 1.78 eV. Analysis results of CuS thin films using SILAR method show that thickness is an important factor for thin film studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Synthesis of heterostructured Pd@TiO{sub 2}/TiOF{sub 2} nanohybrids with enhanced photocatalytic performance

Highlights: • TiO{sub 2}/TiOF{sub 2} nanohybrids was synthesized via a two-step solvothermal method. • TiO{sub 2}/TiOF{sub 2} exhibited superior photoactivity in comparison with TiOF{sub 2} or TiO{sub 2}. • The photocatalytic activity was further improved by loading Pd nanoparticles. • Synergistic effect between TiOF{sub 2} and TiO{sub 2} was responsible for the enhanced photocatalytic performance over TiO{sub 2}/TiOF{sub 2}. - Abstract: TiO{sub 2}/TiOF{sub 2} heterostructured nanocomposites has been synthesized through a solvothermal method and characterized by X-ray diffraction, scanning electronic microscopy, transmission electronic microscopy, nitrogen adsorption–desorption isotherms, UV–vis and photo-luminescent spectroscopy. It was found that, compared with single TiOF{sub 2} or TiO{sub 2}, the as-prepared TiO{sub 2}/TiOF{sub 2} nanocomposites exhibited superior photoactivity towards the degradation of organic pollutants, i.e. rhodamine B and solar hydrogen evolution. The results are in accordance with the prohibition of photogenerated electrons and holes recombination in these two samples under light illumination. The photocatalytic activity can be further boosted by introducing Pd nanoparticles onto the surfaces of TiO{sub 2}/TiOF{sub 2} through a simple deposition method without using any stabilizers, which is probably attributed to the enhanced visible-light absorption as well as the facilitated charge-carrier separation after the introduction of Pd nanoparticles. The synergistic effect between TiOF{sub 2} and TiO{sub 2} was discussed and was responsible for the enhancement of their activity in comparison with single counterpart.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Starch-assisted synthesis and optical properties of ZnS nanoparticles

Highlights: • ZnS spherical nanostructure was prepared via starch-assisted method. • The crystalline lattice structure, morphologies, chemical and optical properties of ZnS nanoparticles. • The forming mechanism of ZnS nanoparticles. • ZnS spherical nano-structure can show blue emission at 460–500 nm. - Abstract: ZnS nanoparticles are fabricated via starch-assisted method. The effects of different starch amounts on structure and properties of samples are investigated, and the forming mechanism of ZnS nanoparticles is discussed. By X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–vis) spectroscopy and fluorescence (FL) spectrometer, their phases, crystalline lattice structure, morphologies, chemical and optical properties are characterized. The results show that ZnS has polycrystalline spherical structure with the mean diameter of 130 nm. Sample without starch reveals irregular aggregates with particle size distribution of 0.5–2 μm. The band gap value of ZnS is 3.97 eV. The chemical interaction exists between starch molecules and ZnS nanoparticles by hydrogen bonds. The stronger FL emission peaks of ZnS synthesized with starch, indicate a larger content of sulfur vacancies or defects than ZnS synthesized without starch.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Superconducting Performance, Structure, Microstructure, and Trapped Field of Top-Seeded Melt-Processed Bulk Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub x}

The sintering temperature for the production of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} (Y-358) preform powders synthesized in sol-gel spontaneous combustion technique was optimized. A large single-grain bulk Y-358 crystal was fabricated employing a top-seeded melt-growth technique utilizing the optimally sintered preform powders (i.e., at 900 {sup ∘}C for 12 h). Structural, microstructural, elemental, and magnetic properties were investigated by means of X-ray diffraction, scanning electron microscopy, and SQUID, respectively. The structural characterization indicated that the sample is highly textured in (00l) direction. The Y-358 phase fractions were estimated in both preform powders and bulk sample using Rietveld refinement. The onset of superconducting transition is observed at 92.5 K, and the curve is very sharp indicative of the high quality of the produced bulk sample. The field dependence of critical current density (J{sub c}) was determined at 77 K, and the self-field J{sub c} was found to be ∼26 kA/cm{sup 2}. A magnetic field of 0.27 T was trapped by the sample at 77 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗