Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Selenium adsorption to aluminum-based water treatment residuals

Aluminum-based water treatment residuals (WTR) can adsorb water- and soil-borne P, As(V), As(III), and perchlorate, and may be able to adsorb excess environmental selenium. WTR, clay minerals, and amorphous aluminum hydroxide were shaken for 24 h in selenate or selenite solutions at pH values of 5-9, and then analyzed for selenium content. Selenate and selenite adsorption edges were unaffected across the pH range studied. Selenate adsorbed on to WTR, reference mineral phases, and amorphous aluminum hydroxide occurred as outer sphere complexes (relatively loosely bound), while selenite adsorption was identified as inner-sphere complexation (relatively tightly bound). Selenite sorption to WTR in an anoxic environment reduced Se(IV) to Se(0), and oxidation of Se(0) or Se(IV) appeared irreversible once sorbed to WTR. Al-based WTR could play a favorable role in sequestering excess Se in affected water sources.

54 ENVIRONMENTAL SCIENCES↗

Selective Se-for-S substitution in Cs-bearing uranyl compounds

Phase formation in the mixed sulfate-selenate aqueous system of uranyl nitrate and cesium nitrate has been investigated. Two types of crystalline compounds have been obtained and characterized using a number of experimental (single crystal XRD, FTIR, SEM) and theoretical (information-based complexity calculations, topological analysis) techniques. No miscibility gaps have been observed for Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se), which crystallizes in tetragonal system, P-42{sub 1}m, a =9.616(1)–9.856(2), c =8.105(1)–8.159(1) Å, V =749.6(2)–792.5(3) Å{sup 3}. Nine phases with variable amount of S and Se have been structurally characterized. The structures of the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) compounds are based upon the [(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}]{sup 2-} layers of corner-sharing uranyl pentagonal bipyramids and TO{sub 4} tetrahedra. The layers contain two types of tetrahedral sites: T1 (3-connected, i.e. having three O atoms shared by adjacent uranyl polyhedra) and T2 (4-connected). The Se-for-S substitution in tetrahedral sites is highly selective with smaller S{sup 6+} cation showing a strong preference for the more tightly bonded T2 site. Crystallization in the pure Se system starts with the formation of Cs{sub 2}[(UO{sub 2})(SeO{sub 4}){sub 2}(H{sub 2}O)](H{sub 2}O) crystals, its subsequent dissolution and formation of Cs{sub 2}[(UO{sub 2}){sub 2}(SeO{sub 4}){sub 3}]. The information-based structural complexity calculations for these two phases support the rule that more topologically complex structures form at the latest stages of crystallization. - Graphical abstract: Nine phases representing the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) solid solution series with variable amount of S and Se have been prepared by isothermal evaporation from aqueous solutions and characterized using a number of experimental and theoretical techniques. No immiscibility is observed between the pure sulfate and selenate compounds. The Se-for-S substitution in tetrahedral sites is highly selective with smaller S{sup 6+} cation showing a strong preference for the more tightly bonded 4-connected site. - Highlights: • Single crystals of novel mixed sulfate-selenate uranyl oxysalts were prepared by evaporation method. • Topological analysis and information-based complexity calculations were used for structure description. • The selective Se-for-S substitution was observed. • Evolution of phase formation in the aqueous Cs{sup +}–UO{sub 2}{sup 2+}–SO{sub 4}{sup 2–}–SeO{sub 4}{sup 2–} system was analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selenium tolerance, accumulation, localization and speciation in a Cardamine hyperaccumulator and a non-hyperaccumulator

Cardamine violifolia (family Brassicaceae ) is the first discovered selenium hyperaccumulator from the genus Cardamine with unique properties in terms of selenium accumulation, i.e., high abundance of selenolanthionine. In our study, a fully comprehensive experiment was conducted with the comparison of a non-hyperaccumulator Cardamine species, Cardamine pratensis , covering growth characteristics, chlorophyll fluorescence, spatial selenium/sulfur distribution patterns through elemental analyses (synchrotron-based X-Ray Fluorescence and ICP-OES) and speciation data through selenium K-edge micro X-ray absorption near-edge structure analysis (μXANES) and strong cation exchange (SCX)-ICP-MS. The results revealed remarkable differences in contrast to other selenium hyperaccumulators as neither Cardamine pecies showed evidence of growth stimulation by selenium. Also, selenite uptake was not inhibited by phosphate for either of the Cardamine species. Sulfate inhibited selenate uptake, but the two Cardamine species did not show any difference in this respect. However, μXRF derived speciation maps and selenium/sulfur uptake characteristics provided results that are similar to other formerly reported hyperaccumulator and non-hyperaccumulator Brassicaceae species. μXANES showed organic selenium, “C-Se-C”, in seedlings of both species and also in mature C. violifolia plants. In contrast, selenate-supplied mature C. pratensis contained approximately half “C-Se-C” and half selenate. SCX-ICP-MS data showed evidence of the lack of selenocystine in any of the Cardamine plant extracts. Thus, C. violifolia shows clear selenium-related physiological and biochemical differences compared to C. pratensis and other selenium hyperaccumulators.

Environmental Sciences & Ecology↗

Synthesis of CZTS/Se and Their Solid Solution from Electrodeposited Cu–Sn–Zn Metal Precursor: A Study of S and Se Replacement Reaction

Selenization, sulfurization, and sulfo-selenization of electrodeposited metal precursor (Cu-Sn-Zn) at high temperature (500-600 °C) in S, Se, or S + Se (mixed) atmospheres are used to understand the thermodynamics of chalcogenide incorporation reaction. Phase-pure CZTSe and CZTS were obtained after annealing at 500 degrees C for 1 min in Se (selenization) and 600 degrees C for 10 min in S (sulfurization) atmospheres, respectively. CZTSSe solid solutions are synthesized by the sequential annealing of metal precursors in S and Se atmosphere separately or in the mixed (S + Se) atmosphere. In the S-rich mixed atmosphere, S-rich CZTSSe solid solution is formed at all annealing conditions. Surprisingly, in a Se-rich mixed atmosphere, longer annealing at 600 degrees C yields S-rich CZTSSe. The CZTSSe film formed by annealing in near equimolar S/Se atmosphere exhibits a compositional gradient across the thickness. Furthermore, these results suggest that the crystallinity, composition, and hence the bandgap of CZTSSe can be precisely controlled by the proper choice of annealing temperature, duration, and atmosphere.

14 SOLAR ENERGY↗

Efficient extraction of inorganic selenium from water by a Zr metal–organic framework: investigation of volumetric uptake capacity and binding motifs

Strict monitoring and control of selenium concentrations in freshwater supplies is critical to safeguarding human health and aquatic life. A handful of previously investigated sorbents exhibit noteworthy gravimetric (mg g -1 ) Se uptake capacities; however, often display insufficient volumetric (mg cm -3 ) capacities, thereby requiring large volumes of material for commercial implementation. In this paper, in pursuit of mitigating this material inefficiency, we investigated the selenite (SeO 3 2- ) and selenate (SeO 4 2- ) affinity of MOF-808, a Zr-based metal–organic framework with a high density of potential Se oxyanion binding sites. MOF-808 recorded exceptional volumetric and gravimetric Se oxyanion capacities of 133 mg g -1 (127 mg cm -3 ) and 118 mg g -1 (112 mg cm -3 ) for aqueous selenite and selenate, respectively. Single-crystal X-ray diffraction studies revealed that selenite and selenate can bind at the MOF node via two distinct binding motifs, an η 2 μ 2 motif in which the oxyanion coordinates to two different metal atoms in a single node, and a μ 2 motif in which the oxyanion interacts with only a single metal atom. Finally and furthermore, powder X-ray diffraction (PXRD) patterns and N 2 adsorption/desorption isotherms confirm the retention of bulk crystallinity and porosity after the uptake of Se oxyanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field evidence of selenium bioreduction in a uranium-contaminated aquifer

Removal of selenium from groundwater was documented during injection of acetate into a uraniumcontaminated aquifer near Rifle, Colorado (USA). Bioreduction of aqueous selenium to its elemental form (Se0) concentrated it within mineralized biofilms affixed to tubing used to circulate acetate-amended groundwater. Scanning and transmission electron microscopy revealed close association between Se0 precipitates and cell surfaces, with Se0 aggregates having a diameter of 50-60 nm. Accumulation of Se0 within biofilms occurred over a three-week interval at a rate of c. 9 mg Se0m-2 tubing day-1. Removal was inferred to result from the activity of a mixed microbial community within the biofilms capable of coupling acetate oxidation to the reduction of oxygen, nitrate and selenate. Phylogenetic analysis of the biofilm revealed a community dominated by strains of Dechloromonas sp. and Thauera sp., with isolates exhibiting genetic similarity to the latter known to reduce selenate to Se0. Enrichment cultures of selenate-respiring microorganisms were readily established using Rifle site groundwater and acetate, with cultures dominated by strains closely related to D. aromatica (96-99% similarity). Predominance of Dechloromonas sp. in recovered biofilms and enrichments suggests this microorganism may play a role in the removal of selenium oxyanions present in Se-impacted groundwaters and sediments.

contamination↗

Phase stability in Ag-Cu-In-Ga metal precursors for (Ag,Cu)(In,Ga)Se 2 thin films

The addition of Ag to Cu-Ga-In precursors for reaction to form (AgCu)(InGa)Se 2 has shown benefits including improved adhesion, greater process tolerance and potential for improved device performance. In this study, metal precursors were sputtered with a Cu-Ga/In/Ag-Ga sequence with Ag/(Cu+Ag) = 0.25 and (Ag+Cu)/(Ga+In) = 0.90. These precursor layers are shown to be unstable, with a phase evolution during storage at room temperature revealed by x-ray diffraction (XRD). This behavior was studied in samples annealed in the temperature range of 60–150 °C or stored for up to 90 days. XRD analyses indicated the formation of (Ag 1-x Cu x )In 2 with Cu content of 28% and 36% for samples annealed at 100 °C and 150 °C, respectively. Energy dispersive x-ray spectroscopy and XRD analyses on selenized samples showed a uniform distribution of Ag and Cu through the films and a Ga accumulation near the back interface. Solar cells fabricated from the selenized films showed improved device performance in V OC and FF as a result of the precursor anneal.

(Ag,Cu)(In,Ga)Se2↗

Selectivity Principles in Anion Separation by Crystallization of Hydrogen-Bonding Capsules

The fundamental factors controlling anion selectivity in the crystallization of hydrogen-bonding capsules [Mg(H2O)6][X L2] (X = SO42-, 1a; SeO42-, 1b; SO32-, 1c; CO32-, 1d; L = tris[2-(3-pyridylurea)ethyl]-amine) from water have been investigated by solution and solid-state thermodynamic measurements, anion competition experiments, and X-ray structural analysis. The crystal structures of 1a-d are isomorphous, thereby simplifying the interpretation of the observed selectivities based on differences in anion coordination geometries. The solubilities of 1a-d in water follow the order: 1a < 1b < 1c < 1d, which is consistent with the selectivity for the tetrahedral sulfate and selenate anions observed in competitive crystallization experiments. Crystallization of the capsules is highly exothermic, with the most favorable {Delta}H{sub cryst}{sup o} of -99.1 and -108.5 kJ/mol corresponding to SO42- and SeO42-, respectively, in agreement with the X-ray structural data showing shape complementarity between these tetrahedral anions and the urea-lined cavities of the capsules. Sulfite, on the other hand, has a significantly less negative {Delta}H{sub cryst}{sup o} of -64.6 kJ/mol, which may be attributed to its poor fit inside the capsules, involving repulsive interactions. The more favorable entropy of crystallization for this anion, however, partly offsets the enthalpic disadvantage, resulting in a solubility product very similar to that of the selenate complex. Because of their very similar shape and size, SO42- and SeO42- have a propensity to form solid solutions, which limits the selectivity between these two anions in competitive crystallizations. In the end, a comprehensive picture of contributing factors to anion selectivity in crystalline hydrogen-bonding capsules emerges.

36 MATERIALS SCIENCE↗

Selenium Accumulation, Distribution, and Speciation in Spineless Prickly Pear Cactus: A Drought- and Salt-Tolerant, Selenium-Enriched Nutraceutical Fruit Crop for Biofortified Foods

The organ-specific accumulation, spatial distribution, and chemical speciation of selenium (Se) were previously unknown for any species of cactus. We investigated Se in Opuntia ficus-indica using inductively coupled plasma mass spectrometry, microfocused x-ray fluorescence elemental and chemical mapping ({micro}XRF), Se K-edge x-ray absorption near-edge structure (XANES) spectroscopy, and liquid chromatography-mass spectrometry (LC-MS). {micro}XRF showed Se concentrated inside small conic, vestigial leaves (cladode tips), the cladode vasculature, and the seed embryos. Se K-edge XANES demonstrated that approximately 96% of total Se in cladode, fruit juice, fruit pulp, and seed is carbon-Se-carbon (C-Se-C). Micro and bulk XANES analysis showed that cladode tips contained both selenate and C-Se-C forms. Inductively coupled plasma mass spectrometry quantification of Se in high-performance liquid chromatography fractions followed by LC-MS structural identification showed selenocystathionine-to-selenomethionine (SeMet) ratios of 75:25, 71:29, and 32:68, respectively in cladode, fruit, and seed. Enzymatic digestions and subsequent analysis confirmed that Se was mainly present in a 'free' nonproteinaceous form inside cladode and fruit, while in the seed, Se was incorporated into proteins associated with lipids. {micro}XRF chemical mapping illuminated the specific location of Se reduction and assimilation from selenate accumulated in the cladode tips into the two LC-MS-identified C-Se-C forms before they were transported into the cladode mesophyll. We conclude that Opuntia is a secondary Se-accumulating plant whose fruit and cladode contain mostly free selenocystathionine and SeMet, while seeds contain mainly SeMet in protein. When eaten, the organic Se forms in Opuntia fruit, cladode, and seed may improve health, increase Se mineral nutrition, and help prevent multiple human cancers.

54 ENVIRONMENTAL SCIENCES↗

Identification and characterization of anion binding sites in RNA

Although RNA molecules are highly negatively charged, anions have been observed bound to RNA in crystal structures. It has been proposed that anion binding sites found within isolated RNAs represent regions of the molecule that could be involved in intermolecular interactions, indicating potential contact points for negatively charged amino acids from proteins or phosphate groups from an RNA. Several types of anion binding sites have been cataloged based on available structures. However, currently there is no method for unambiguously assigning anions to crystallographic electron density, and this has precluded more detailed analysis of RNA-anion interaction motifs and their significance. We therefore soaked selenate into two different types of RNA crystals and used the anomalous signal from these anions to identify binding sites in these RNA molecules unambiguously. Examination of these sites and comparison with other suspected anion binding sites reveals features of anion binding motifs, and shows that selenate may be a useful tool for studying RNA-anion interactions.

36 MATERIALS SCIENCE↗

Massively Parallel Algorithms for Real-Time Wavefront Control of a Dense Adaptive Optics System

In this paper massively parallel algorithms and architectures for real-time wavefront control of a dense adaptive optic system (SELENE) are presented. We have already shown that the computation of a near optimal control algorithm for SELENE can be reduced to the solution of a discrete Poisson equation on a regular domain. Although this represents an optimal computation, due the large size of the system and the high sampling rate requirement, the implementation of this control algorithm poses a computationally challenging problem since it demands a sustained computational throughput of the order of 10 GFlops. We develop a novel algorithm, designated as Fast Invariant Imbedding algorithm, which offers a massive degree of parallelism with simple communication and synchronization requirements. Due to these features, our algorithm is significantly more efficient than other Fast Poisson Solvers for implementation on massively parallel architectures.

massively↗

Cold adaptation of the mononuclear molybdoenzyme periplasmic nitrate reductase from the Antarctic bacterium Shewanella gelidimarina

Highlights: Black-Right-Pointing-Pointer Cold-adapted phenotype of NapA from the Antarctic bacterium Shewanella gelidimarina. Black-Right-Pointing-Pointer Protein homology model of NapA from S. gelidimarina and mesophilic homologue. Black-Right-Pointing-Pointer Six amino acid residues identified as lead candidates governing NapA cold adaptation. Black-Right-Pointing-Pointer Molecular-level understanding of designing cool-temperature in situ oxyanion sensors. -- Abstract: The reduction of nitrate to nitrite is catalysed in bacteria by periplasmic nitrate reductase (Nap) which describes a system of variable protein subunits encoded by the nap operon. Nitrate reduction occurs in the NapA subunit, which contains a bis-molybdopterin guanine dinucleotide (Mo-MGD) cofactor and one [4Fe-4S] iron-sulfur cluster. The activity of periplasmic nitrate reductase (Nap) isolated as native protein from the cold-adapted (psychrophilic) Antarctic bacterium Shewanella gelidimarina (Nap{sub Sgel}) and middle-temperature adapted (mesophilic) Shewanella putrefaciens (Nap{sub Sput}) was examined at varied temperature. Irreversible deactivation of Nap{sub Sgel} and Nap{sub Sput} occurred at 54.5 and 65 Degree-Sign C, respectively. When Nap{sub Sgel} was preincubated at 21-70 Degree-Sign C for 30 min, the room-temperature nitrate reductase activity was maximal and invariant between 21 and 54 Degree-Sign C, which suggested that Nap{sub Sgel} was poised for optimal catalysis at modest temperatures and, unlike Nap{sub Sput}, did not benefit from thermally-induced refolding. At 20 Degree-Sign C, Nap{sub Sgel} reduced selenate at 16% of the rate of nitrate reduction. Nap{sub Sput} did not reduce selenate. Sequence alignment showed 46 amino acid residue substitutions in Nap{sub Sgel} that were conserved in NapA from mesophilic Shewanella, Rhodobacter and Escherichia species and could be associated with the Nap{sub Sgel} cold-adapted phenotype. Protein homology modeling of Nap{sub Sgel} using a mesophilic template with 66% amino acid identity showed the majority of substitutions occurred at the protein surface distal to the Mo-MGD cofactor. Two mesophilic {r_reversible} psychrophilic substitutions (Asn {r_reversible} His, Val {r_reversible} Trp) occurred in a region close to the surface of the NapA substrate funnel resulting in potential interdomain {pi}-{pi} and/or cation-{pi} interactions. Three mesophilic {r_reversible} psychrophilic substitutions occurred within 4.5 A of the Mo-MGD cofactor (Phe {r_reversible} Met, Ala {r_reversible} Ser, Ser {r_reversible} Thr) resulting in local regions that varied in hydrophobicity and hydrogen bonding networks. These results contribute to the understanding of thermal protein adaptation in a redox-active mononuclear molybdenum enzyme and have implications in optimizing the design of low-temperature environmental biosensors.

60 APPLIED LIFE SCIENCES↗

Colloidal CIGS and CZTS nanocrystals: A precursor route to printed photovoltaics

This review article summarizes our research focused on Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (CIGS) nanocrystals, including their synthesis and implementation as the active light absorbing material in photovoltaic devices (PVs). CIGS PV layers are typically made using a high temperature (>450 Degree-Sign C) process in which Cu, In and Ga are sequentially or co-evaporated and selenized. We have sought to use CIGS nanocrystals synthesized with the desired stoichiometry to deposit PV device layers without high temperature processing. This approach, using spray deposition of the CIGS light absorber layers, without high temperature selenization, has enabled up to 3.1% power conversion efficiency under AM 1.5 solar illumination. Although the device efficiency is too low for commercialization, these devices provide a proof-of-concept that solution-deposited CIGS nanocrystal films can function in PV devices, enabling unconventional device architectures and materials combinations, including the use of flexible, inexpensive and light-weight plastic substrates. - Graphical abstract: The semiconductor light-absorbing layers in photovoltaic devices can be deposited under ambient conditions using nanocrystal inks. Devices can be fabricated on glass or on mechanically flexible plastic substrates. Highlights: Black-Right-Pointing-Pointer CIGS and CZTS nanocrystals are synthesized and formulated into inks. Black-Right-Pointing-Pointer Nanocrystal films are spray deposited and used as light absorbing layers in photovoltaic devices. Black-Right-Pointing-Pointer Photovoltaic devices were constructed from nanowire mats. Black-Right-Pointing-Pointer Photovoltaic device efficiency is limited by electrical transport in the nanocrystal layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-cost fabrication of ternary CuInSe{sub 2} nanocrystals by colloidal route using a novel combination of volatile and non-volatile capping agents

Wet-route synthesis of CuInSe{sub 2} (CISe) nanocrystals has been envisaged with the utilization of the unique combination of coordinating ligand and non coordinating solvent. Our work demonstrates the formation of a single-phase, nearly stoichiometric and monodispersive, stable and well-passivated colloidal ternary CISe nanocrystals (band gap (E{sub g})∼1.16 eV) using a novel combination of ligands; viz. volatile arylamine aniline and non-volatile solvent 1-octadecene. The synthesis and growth conditions have been manoeuvred using the colligative properties of the mixture and thus higher growth temperature (∼250 °C) could be attained that promoted larger grain growth. The beneficial influence of the capping agents (aniline and 1-octadecene) on the properties of chalcopyrite nanocrystals has enabled us to pictorally model the structural, morphological and optoelectronic aspects of CISe nanoparticles. - Graphical abstract: Without resorting to any post-selenization process and using the colligative properties of the mixture comprising of volatile aniline and non-volatile 1-octadecene to manoeuvre the growth conditions to promote Ostwald ripening, a single phase, monodispersive and nearly stoichiometric ternary CISe nanocrystals are formed by wet-synthesis route. - Highlights: • Wet-route synthesis of CISe nanocrystals reported without post-selenization process. • Single-phase, stable and well-passivated colloidal ternary CISe nanocrystals formed. • Novel combination of capping agents: volatile aniline and non-volatile 1-octadecene. • Higher growth temperature attained using the colligative properties of the mixture. • Metallic salts presence explains exp. and theoretical boiling point difference.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuAl{sub x}Ga{sub 1−x}Se{sub 2} thin films for photovoltaic applications: Optical and compositional analysis

Highlights: ► Wide band gap CAGS thin films have been obtained by selenization of evaporated metallic precursors. ► Direct nonlinear dependence of the band gap energy with the Al/(Al + Ga) ratio is found. ► The bowing parameter decreases when the CAGS film thickness increases. ► The Cu at% remains constant in depth, together with some Al, Ga and Se gradients. ► Surface is strongly oxidized but the oxidation is relatively low in bulk. - Abstract: Wide-band gap chalcopyrite semiconductors have a great interest due to their potential application in multi-junction thin film solar cells or as window layers. Polycrystalline CuAl{sub x}Ga{sub 1−x}Se{sub 2} (CAGS) thin films have been prepared by selenization of evaporated metallic precursor layers on bare and Mo-coated soda lime glass substrates. The optical properties of CAGS films of 2 thicknesses have been analyzed by spectrophotometry in the visible-infrared (VIS-IR) and the compositional characteristics have been studied by energy dispersive analysis of X-rays (EDAX) and X-ray photoelectron spectroscopy (XPS). The optical transmission increases and the band gap energy shifts toward higher values as the Al content increases, which indicates the partial substitution of Ga by Al. The dependence of the band gap with the composition has resulted to be nonlinear and a bowing parameter of b = 0.62 and b = 0.54 for 0.6 μm and 1.1 μm-CAGS samples, respectively, has been obtained. XPS data have shown an Al, Ga and Se composition gradient in depth and a surface strongly oxidized. However, XPS reveals that the Cu composition remains constant in depth and the oxidation is relatively low in bulk increasing slightly in the interface with Mo/SLG. Moreover, samples with high Al content reveal a higher contribution of CuO in depth.

36 MATERIALS SCIENCE↗

AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films for solar cell applications

Highlights: ► AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films were formed by heating Na{sub 2}SeSO{sub 3} dipped Sb{sub 2}S{sub 3}/Ag layers. ► S/Se ratio was varied by changing the dipping time in Na{sub 2}SeSO{sub 3} solution. ► Characterized the films using XRD, XPS, SEM, Optical and electrical measurements. ► Band gap engineering of 1−1.1 eV for x = 0.51 and 0.52 respectively. ► PV Glass/FTO/CdS/AgSb(S{sub x}Se{sub 1−x}){sub 2}/C were prepared showing V{sub oc} = 410 mV, J{sub sc} = 5.7 mA/cm{sup 2}. - Abstract: Silver antimony sulfoselenide (AgSb(S{sub x}Se{sub 1−x}){sub 2}) thin films were prepared by heating glass/Sb{sub 2}S{sub 3}/Ag layers after selenization using sodium selenosulphate solution. First, Sb{sub 2}S{sub 3} thin films were deposited on glass substrates from a chemical bath containing SbCl{sub 3} and Na{sub 2}S{sub 2}O{sub 3}. Then Ag thin films were thermally evaporated onto glass/Sb{sub 2}S{sub 3}, followed by selenization by dipping in an acidic solution of Na{sub 2}SeSO{sub 3}. The duration of selenium dipping was varied as 30 min and 2 h. The heating condition was at 350 °C for 1 h in vacuum. Analysis of X-ray diffraction pattern of the thin films formed after heating showed the formation of AgSb(S{sub x}Se{sub 1−x}){sub 2}. Morphology and elemental analysis were done by scanning electron microscopy and energy dispersive X-ray detection. Depth profile of composition of the thin films was performed by X-ray Photoelectron Spectroscopy. The spectral study showed the presence of Ag, Sb, S, and Se, and the corresponding binding energy analysis confirmed the formation of AgSb(S{sub x}Se{sub 1−x}){sub 2}. Photovoltaic structures (PV) were prepared using AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films as absorber and CdS thin films as window layers on FTO coated glass substrates. The PV structures were heated at 60–80 °C in air for 1 h to improve ohmic contact. Analysis of J–V characteristics of the PV structures showed V{sub oc} from 230 to 490 mV and J{sub sc} 0.28 to 5.70 mA/cm{sup 2}, under illumination of AM1.5 radiation using a solar simulator.

36 MATERIALS SCIENCE↗

Investigation of Cu(In,Ga)Se{sub 2} polycrystalline growth: Ga diffusion and surface morphology evolution

Graphical abstract: - Highlights: • Ga diffusion in CIGS absorption layer after annealing treatment. • Phenomenon of surface reconstruction after annealing treatment. • Understand selenium effect on CIGS annealing process. • Explain the kinetic of Ga diffusion and MoSe{sub 2} formation. - Abstract: We report a study of selenization and annealing treatment of copper indium gallium selenide (CIGS) film. Morphologies and composition of surface and cross section were observed by scanning electron microscopy (SEM) equipped with Energy Dispersive Spectroscopy (EDS). X-ray diffraction (XRD) and Raman spectra were used to investigate film structure. Depth profiles of element distributions were detected by Auger electron spectroscopy (AES). A double-layer structure was formed in the film by selenizing metallic precursor at 450 °C. Further annealing at 600 °C in pure argon enhanced gallium diffusion from the bottom to the top of the film, while additional selenium in the annealing had a negative effect. A MoSe{sub 2} layer was detected between CIGS and Mo layers with annealing in additional Se. The annealing treatment also significantly modified the film surface morphology. A large amount of triangular and polygon shaped islands were observed by SEM. That might be due to different nucleation kinetics for different crystal facets.

36 MATERIALS SCIENCE↗

Non-toxic novel route synthesis and characterization of nanocrystalline ZnS{sub x}Se{sub 1−x} thin films with tunable band gap characteristics

Highlights: • A simple, inexpensive, and non-toxic CBD route is used to deposit ZnS thin films. • The ZnS{sub x}Se{sub 1−x} thin films formation takes place via annealing of ZnS thin films in Se atmosphere. • S/(S + Se) ratio found to be temperature dependent and easy tuning of band gap has been done by Se atom deposition. - Abstract: An environmentally benign chemical bath deposition (CBD) route was employed to deposit zinc sulfide (ZnS) thin films. The CBD-ZnS thin films were further selenized in a furnace at various temperatures viz. 200, 300, 400, and 500 °C and the S/(S + Se) ratio was found to be dependent on the annealing temperature. The effects of S/(S + Se) ratio on the structural, compositional and optical properties of the ZnS{sub x}Se{sub 1−x} (ZnSSe) thin films were investigated. EDS analysis showed that the S/(S + Se) ratio decreased from 0.8 to 0.6 when the film annealing temperature increased from 200 to 500 °C. The field emission scanning electron microscopy and atomic force microscopy studies showed that all the films were uniform, pin hole free, smooth, and adhered well to the glass substrate. The X-ray diffraction study on the ZnSSe thin films showed the formation of the cubic phase, except for the unannealed ZnSSe thin film, which showed an amorphous phase. The X-ray photoelectron spectroscopy revealed Zn-S, Zn-Se, and insignificant Zn-OH bonds formation from the Zn 2p{sub 3/2}, S 2p, Se 3d{sub 5/2}, and O 1s atomic states, respectively. The ultraviolet–visible spectroscopy study showed ∼80% transmittance in the visible region for all the ZnSSe thin films having various absorption edges. The tuning of the band gap energy of the ZnSSe thin films was carried out by selenizing CBD-ZnS thin films, and as the S/(S + Se) ratio decreased from 0.8 to 0.6, the band gap energy decreased from 3.20 to 3.12 eV.

36 MATERIALS SCIENCE↗