Search NASA⌕ Search

SEARCH · Search NASA

Results for “single-crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Optical absorption components of light-modulated absorption spectrum of CdS

The amplitude and decay coefficient of light-induced modulation of absorption (LIMA) was measured as a function of wavelength from 535 to 850 nm for single-crystal CdS. The decay coefficient exhibited a discontinuous resonance at 710 nm which was due to the overlap and cancellation of two opposing absorption changes. A method was developed to separate these opposing absorption changes using the measured decay coefficients. The discrete-level-to-band energy for one absorption change was found to be 1.64 eV. An improved model was developed which contains two associated levels in the band gap separated by 0.32 eV.

Conway, E. J.↗
NASA NTRS1975

Experimental shock metamorphism of maximum microcline

A series of recovery experiments are conducted to study the behavior of single-crystal perthitic maximum microcline shock-loaded to a peak pressure of 417 kbar. Microcline is found to deform in a manner similar to quartz and other alkali feldspars. It is observed that shock-induced cleavages occur initially at or slightly below the Hugoniot elastic limit (60-85 kbar), that shock-induced rather than thermal disordering begins above the Hugoniot elastic limit, and that all types of planar elements form parallel to crystallographic planes of low Miller indices. When increasing pressure, it is found that bulk density, refractive indices, and birefringence of the recovered material decrease and approach diaplectic glass values, whereas disappearance and weakening of reflections in Debye-Sherrer patterns are due to disordering of the feldspar lattice.

Robertson, P. B.↗
NASA NTRS1975

Oxide nucleation on thin films of copper during in situ oxidation in an electron microscope

Single-crystal copper thin films were oxidized at an isothermal temperature of 425 C and at an oxygen partial pressure of 0.005 torr. Specimens were prepared by epitaxial vapor deposition onto polished faces of rocksalt and were mounted in a hot stage inside the ultrahigh-vacuum chamber of a high-resolution electron microscope. An induction period of roughly 30 min was established which was independent of the film thickness but depended strongly on the oxygen partial pressure and to exposure to oxygen prior to oxidation. Neither stacking faults nor dislocations were found to be associated with the Cu2O nucleation sites. The experimental data, including results from oxygen dissolution experiments and from repetitive oxidation-reduction-oxidation sequences, fit well into the framework of an oxidation process involving the formation of a surface charge layer, oxygen saturation of the metal with formation of a supersaturated zone near the surface, and nucleation followed by surface diffusion of oxygen and bulk diffusion of copper for lateral and vertical oxide growth, respectively.

Heinemann, K.↗
NASA NTRS1975

Infrared upconversion as a means of seeing in the dark

A new approach to seeing in the dark is described which is based on the principles of nonlinear optics employing a crystal such as lithium iodate. A nonlinear optical device capable of producing photons at higher frequencies from lower-frequency incident light is shown to upconvert infrared light directly into visible light. The major advantages of the infrared upconversion process is that it permits the infrared signal to be detected by photon-counting devices presently available for the visible spectral region, and that it can provide sensitivity to infrared radiation without the need for cryogenic cooling of the detector used. Early works on infrared upconversion are reviewed. The development of applications is discussed as to astronomical spectroscopy and infrared image upconversion involving either angular or positional resolution elements. The demonstration of infrared upconversion in rectangular waveguides of single-crystal GaAs by Anderson et al. (1971) indicates future possibilities in upconversion by the use of integrated optics devices.

Gurski, T. R.↗
NASA NTRS1975

Study of growth of single crystal ribbon in space

The technical feasibility is studied of growing single-crystal silicon ribbon in the space environment. Procedures are described for calculating the electromagnetic fields produced in a silicon ribbon by an rf shaping coil. The forces on the ribbon and the degree of shaping to be expected are determined. The expected steady-state temperature distribution in the ribbon is calculated in the one-dimensional approximation. Calculations on simplified models indicate, that lack of flatness of the shaped ribbon and excessive heating of the melt by the eddy currents induced by the shaping fields may pose problems. An analysis of the relative effects of various kinds of forces other than electromagnetic showed that in the space environment capillarity forces would dominate, and that the shape of the melt is thus principally determined by the shape of any solids with which it comes in contact. This suggests that ribbon may be produced simply by drawing between parallel wires. A concept is developed for a process of off-angle growth, in which the ribbon is pulled at an angle to the solidification front. Such a process promises to offer increased growth rate, better homogeneity, and thinner ribbon.

Wood, V. E.↗
NASA NTRS1975

Evaluation of silicon ribbon material for solar cell fabrication

Optical microscopy, electron microscopy, and X-ray diffraction were utilized to characterize silicon ribbon structure. Complex twin formation was observed in nearly all ribbons examined. Twins formed in the 110-plane 112-line ribbon orientation appear stable, and this orientation may be preferable when the ribbon is utilized for solar cells. In addition to twinning, grain boundaries and other structural defects were observed in the ribbon material. Hall effect, resistivity, spreading resistance, surface photovoltage, and solar cell electrical/optical measurements were performed on ribbon samples and correlated with structural and ribbon growth characteristics. Only those ribbon samples with either single-crystal structure or with 'parallel' twin formations were capable of solar-cell performance approaching that of Czochralski material.

Leipold, M.↗
NASA NTRS1976

Interaction of metal layers with polycrystalline Si

Solid-phase reactions of metal films deposited on 0.5-micron-thick polycrystalline layers of Si grown by chemical vapor deposition at 640 C were investigated by MeV He-4 backscattering spectrometry, glancing angle X-ray diffraction, and SEM observations. For the metals Al, Ag, and Au, which form simple eutectics, heat treatment at temperatures below the eutectic results in erosion of the poly-Si layer and growth of Si crystallites in the metal film. Crystallite formation is observed at temperatures exceeding 550 C for Ag, at those exceeding 400 C for Al, and at those exceeding 200 C for Au films. For Pd, Ni, and Cr, heat treatment results in silicide formation. The same initial silicides (Pd2Si, Ni2Si, and CrSi2), are formed at similar temperatures on single-crystal substrates.

Nakamura, K.↗
NASA NTRS1976

Magnetic field generated resistivity maximum in graphite

In a zero magnetic field, the electrical resistivity of highly oriented pyrolytic (polycrystalline) graphite drops smoothly with decreasing temperature, becoming constant below 4 K. However, in a fixed applied magnetic field, the resistivity goes through a maximum as a function of temperature, with a larger maximum for a larger field intensity. The temperature of the maximum increases with field intensity, but saturates to a constant value near 25 K (the exact temperature depends on the sample) at high intensity. In single-crystal graphite, a maximum in resistivity as a function of temperature is also present, but has the effects of Landau level quantization superimposed. Several possible explanations for the resistivity maximum are proposed, but a complete explanation awaits detailed calculations involving the energy band structure of graphite, and the particular scattering mechanisms involved.

Woollam, J. A.↗
NASA NTRS1975

Aluminum under high pressure. I - Equation of state

A curve of applied pressure versus lattice constant is calculated for single-crystal aluminum. It results from an application of the method of structural expansions for deriving the energies of simple metals, a method known to give reasonable results for the elastic constants even at second order in the effective electron-ion interaction. The latter is taken from Fermi-surface analysis, and it is verified that the extant face-centered cubic structure remains the preferred crystalline phase up to the highest pressures considered. Arguments are given to suggest that the curve should have reasonable a priori accuracy and can admit possible improvement if experimental data in the intermediate-pressure region can be provided to refine the (in principle) energy-dependent pseudopotential. At three megabars, the lattice constant is reduced by only 22 per cent; the ion cores at this pressure are still very well separated.

Friedli, C.↗
NASA NTRS1976

Flexible, FEP-Teflon covered solar cell module development

Techniques and equipment were developed for the large scale, low-cost fabrication of lightweight, roll-up and fold-up, FEP-Teflon encapsulated solar cell modules. Modules were fabricated by interconnecting solderless single-crystal silicon solar cells and heat laminating them at approximately 300 C between layers of optically clear FEP and to a loadbearing Kapton substrate sheet. Modules were fabricated from both conventional and wraparound contact solar cells. A heat seal technique was developed for mechanically interconnecting modules into an array. The electrical interconnections for both roll-up and fold-up arrays were also developed. The use of parallel-gap resistance welding, ultrasonic bonding, and thermocompression bonding processes for attaching interconnects to solar cells were investigated. Parallel-gap welding was found to be best suited for interconnecting the solderless solar cells into modules. Details of the fabrication equipment, fabrication processes, module and interconnect designs, environmental test equipment, and test results are presented.

Rauschenbach, H. S.↗
NASA NTRS1976

Metal-insulator-semi-conductor studies of lead telluride

The capacitance and conductance-voltage characteristics were measured on metal-insulator-semiconductor capacitors fabricated with zirconium dioxide films on single-crystal lead telluride. At 77 K, on both n- and p-type substrates, evidence of surface potential control was obtained. Comparison of the measured capacitance-voltage characteristics with those calculated from the equilibrium solution of the one-dimensional Poisson equation indicated qualitative agreement, although the slope of the measured capacitance in the region near the capacitance minimum was less steep than calculated.

Lilly, D. A.↗
NASA NTRS1976

Adsorption of oxygen on W/100/ - Adsorption kinetics and structure

The adsorption of oxygen on W(100) single-crystal surfaces is studied by Auger electron spectroscopy (AES), flash desorption, low-energy electron diffraction (LEED), and retarding-field work-function measurements. The AES results reveal stepwise changes in the sticking coefficients in the coverage range 0 to 1 and activated adsorption at higher coverages. Upon room-temperature adsorption, a series of complex LEED patterns is observed. In layers adsorbed at 1050 K and cooled to room temperature, the p(2 x 1) structure is the first ordered structure observed. This structure shows a reversible order-disorder transition between 700 and 1000 K and is characterized by a work function which is lower than that of the clean surface. Heating room-temperature adsorbates changes their structure irreversibly. At temperatures below 750 K, some new structures are observed.

Bauer, E.↗
NASA NTRS1976

Moessbauer effect measurement in single crystal iron subjected to cyclic stress

Backscattered Moessbauer spectra were recorded at different fatigue levels in cyclically fatigued high-purity single-crystal iron specimens in the form of rectangular strips with appropriate concentrators in the midplane. The Moessbauer spectra were submitted to a least-squares analysis to determine the isomer shift, quadrupole shift, hyperfine field, and peak spectral widths in each spectrum. It is shown that the quadrupole shift and the isomer shift changed little with fatigue, whereas the effective internal field and the associate line widths exhibit significant variation as a function of fatigue level. It is concluded that the impurity concentration builds up slowly with increasing fatigue level in the region of stress concentration. Since there is a direct correlation between crack initiation and defect concentration level, it is expected that Moessbauer measurements in the test specimen can provide a means of monitoring the impurity buildup presumed to be the eventual cause of fatigue crack initiation and failure.

Singh, J. J.↗
NASA NTRS1976

Mineralogy of the Ibitira eucrite and comparison with other eucrites and lunar samples

The mineralogy of the Ibitira meteorite is studied using single-crystal X-ray and energy-dispersive electron-probe techniques. It is shown that this strongly metamorphosed unbrecciated vesicular eucrite has a primary variolitic and secondary hornfelsic texture dominated by equant grains of pale-brown pyroxene (60%) set in an irregular matrix of plagioclase (30%). Minor phases are detected which indicate igneous crystallization, a prolonged metamorphic history, and vapor deposition. The following sequence of events is suggested as the simplest explanation for the mineralogical features observed: (1) crystallization of the meteorite in a lava flow; (2) prolonged annealing, reduction of primary spinel, and vapor deposition; (3) strong shock sufficient to modify the texture of the plagioclase grains; and (4) sufficient annealing to allow crystallization of the plagioclase as a subparallel mosaic and partial conversion to the low structural state. Evidence for this sequence is examined in detail, particularly in relation to the general features of eucrites, howardites, and mesosiderites

Steele, I. M.↗
NASA NTRS1977

Measurements of the frequency spectrum of transition radiation

We report a measurement of the frequency spectrum of X-ray transition radiation. X rays were generated by electrons of 5 and 9 GeV in radiators of multiple polypropylene foils, and detected in the range 4 to 30 keV with a calibrated single-crystal Bragg spectrometer. The experimental results closely reproduce the features of the theoretically predicted spectrum. In particular, the pronounced interference pattern of multifoil radiators and the expected hardening of the radiation with increasing foil thickness are clearly observed. The overall intensity of the radiation is somewhat lower than predicted by calculations.

Cherry, M. L.↗
NASA NTRS1977

Application of diffusion barriers to high modulus fibers

Barrier layers were coated onto high-modulus fibers, and nickel and titanium layers were overcoated as simulated matrix materials. The objective was to coat the high-strength fibers with unreactive selected materials without degrading the fibers. The fibers were tungsten, niobium, and single-crystal sapphire, while the materials used as barrier coating layers were Al2O3, Y2O3, TiC, ZrC, WC with 14% Co, and HfO2. An ion-plating technique was used to coat the fibers. The fibers were subjected to high-temperature heat treatments to evaluate the effectiveness of the barrier layer in preventing fiber-metal interactions. Results indicate that Al2O3, Y2O3, and HfO2 can be used as barrier layers to minimize the nickel-tungsten interaction. Further investigation, including thermal cycling tests at 1090 C, revealed that HfO2 is probably the best of the three.

Veltri, R. D.↗
NASA NTRS1976

Pyroxene-spinel intergrowths in lunar and terrestrial pyroxenes

The paper describes the oriented intergrowth of spinel and pyroxene in a pigeonite from Luna 20, an augite from Apollo 16 anorthosite 67075, and an orthopyroxene from a spinel lherzolite nodule from the San Quintin volcanic field, Mexico. Using Mo K alpha radiation, photographs were taken of small, hand-picked single-crystals. A mechanism of exsolution is suggested in which the oxygen framework remains intact and spinel nuclei are formed by the migration of cations from interstitial sites and tetrahedral sites in the original non-stoichiometric pyroxene.

Okamura, F. P.↗