Search NASA⌕ Search

SEARCH · Search NASA

Results for “single-crystal device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Selective amorphization of SiGe in Si/SiGe nanostructures via high energy Si+ implant

Here, the selective amorphization of SiGe in Si/SiGe nanostructures via a 1 MeV Si + implant was investigated, resulting in single-crystal Si nanowires (NWs) and quantum dots (QDs) encapsulated in amorphous SiGe fins and pillars, respectively. The Si NWs and QDs are formed during high-temperature dry oxidation of single-crystal Si/SiGe heterostructure fins and pillars, during which Ge diffuses along the nanostructure sidewalls and encapsulates the Si layers. The fins and pillars were then subjected to a 3 × 10 15 ions/cm 2 1 MeV Si + implant, resulting in the amorphization of SiGe, while leaving the encapsulated Si crystalline for larger, 65-nm wide NWs and QDs. Interestingly, the 26-nm diameter Si QDs amorphize, while the 28-nm wide NWs remain crystalline during the same high energy ion implant. This result suggests that the Si/SiGe pillars have a lower threshold for Si-induced amorphization compared to their Si/SiGe fin counterparts. However, Monte Carlo simulations of ion implantation into the Si/SiGe nanostructures reveal similar predicted levels of displacements per cm 3 . Molecular dynamics simulations suggest that the total stress magnitude in Si QDs encapsulated in crystalline SiGe is higher than the total stress magnitude in Si NWs, which may lead to greater crystalline instability in the QDs during ion implant. The potential lower amorphization threshold of QDs compared to NWs is of special importance to applications that require robust QD devices in a variety of radiation environments.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electron-Deficient Phenazines: Synthesis, Structures, Redox, and Optoelectronic Properties in the Gas Phase, in Solution, and in the Solid State

High-temperature gas-phase reactions of 1,4-C4F8I2 with phenazine (PHNZ) afforded new thermally- and air-stable derivatives with cyclo-C4F8 substituents, viz. 1,2-PHNZ(C4F8), 2,3-PHNZ(C4F8), 1,2:6,7-PHNZ(C4F8)2, 1,2:7,8-PHNZ(C4F8)2, and 1,2:8,9-PHNZ(C4F8)2. Reactions in the presence of Cu powder resulted in reductive-defluorination/aromatization of some of the cyclo-C4F8 substituents to produce 2,3-PHNZ(C4F4), 2,3-PHNZ(C4HF3), and 1,2:6,7-PHNZ(C4F8)(C4F4), which are formally tri- or tetrafluoro derivatives of benzo[a]phenazine. Single-crystal X-ray diffraction structures of these compounds demonstrate the planarity of 2,3-PHNZ(C4F4) and 2,3-PHNZ(C4HF3) and ordered p-stacking in 1,2-PHNZ(C4HF3), 1,2-PHNZ(C4F4), 1,2-PHNZ(C4F8), and 2,3-PHNZ(C4F8). Low-temperature gas-phase photoelectron spectra of the PHNZ(C4F8)1,2 compounds show that they are strong electron acceptors, with the three PHNZ(C4F8)2 isomers having electron affinities exceeding that of C60. Cyclic voltammetry in acetonitrile show that the five PHNZ(C4F8)1,2 compounds exhibit reversible one-electron reductions with large positive shifts in their reduction potentials relative to unsubstituted PHNZ. Spectroelectrochemical absorption and EPR spectra of PHNZ(C4F8)1,2- • anion radicals and extensive DFT calculations revealed the significant role that the different substitution patterns have on determining the optoelectronic properties of the PHNZ(C4F8)1,2 derivatives and PHNZ(C4F8)1,2- • anion radicals. Time-resolved microwave conductivity measurements and photoluminescence spectra of blends of the PHNZ(C4F8)1,2 derivatives with the donor poly(3-hexylthiophene) (P3HT) were recorded to assess the possible use of the new compounds in optoelectronic devices.

Balser, Sebastian↗
DOE OSTI2022

Title Coherent X-ray Studies of Surface Growth and Patterning Processes

X-ray Photon Correlation Spectroscopy (XPCS) is being developed as a tool to study nanoscale dynamics of fluctuations during thin film growth and surface patterning. XPCS examines the evolution of the X-ray scattering speckle pattern in reciprocal space to reveal dynamics information not accessible through any other means. Unlike low-coherence conventional X-ray scattering, which incoherently averages over different regions of a sample, coherent X-ray scattering is sensitive to the detailed structure of a given sample at that moment in time. In thin film growth processes, heterodyning, which occurs due to coherent mixing of two scattered signals, can be used to investigate the relationship between surface growth velocity and defect propagation. And, for polycrystalline thin film growth, the spatial coherence of the X-ray beam can substitute for the missing spatial coherence of the growth process to track layered growth in detail, even in a growth regime in which there are no conventional growth oscillations of the X-ray intensity. This has opened the door for detailed dynamics studies of individual atomic layers during real-world growth and patterning, not just in perfect single-crystal growth cases, which greatly expands the applicability of in-situ X-ray scattering methods. Step-flow dynamics in mounded polycrystalline growth has been studied separately for two thin film organic semiconductors deposited by thermal deposition in a vacuum environment, C60 and diindenoperylene (DIP). Highly oriented polycrystalline thin films are readily obtained in both systems, where mounds are composed of crystalline monolayer-height steps and terraces in a so-called wedding cake morphology. The formation of mounds is understood to be due to significant Ehrlich-Schwoebel step edge barriers that inhibit molecules from hopping down from one layer to the one below. The mounds exhibit local step flow, which can be monitored using coherent X-ray scattering. This is made possible due to heterodyning between scattering from the average mounds and the moving steps, which becomes visible in XPCS analysis. The effect of desorption, i.e. re-evaporation of deposited molecules is found to be important for understanding these processes. The impact of this work is to enable testing of models of step dynamics, the shape of mounds, and merging of mounds to form continuous thin films. Highly ordered polycrystalline thin films deposited on inexpensive substrates have applications in thin film solar cells and other organic electronic devices. In a separate set of experiments, speckle analysis during self-organized ion beam nanopatterning reveals memory stretching back to the beginning of patterning in the early stages and enables measurement of the velocity of self-organized patterns across surfaces providing the possibility of stringent new tests of the theory of pattern formation and motion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spectra-Orthogonal Optical Anisotropy in Wafer-Scale Molecular Crystal Monolayers

Controlling the spectral and polarization response of two-dimensional (2D) crystals is vital for developing ultrathin platforms for compact optoelectronic devices. However, independently tuning optical anisotropy and spectral response remains challenging in conventional semiconductors due to the intertwined nature of their lattice and electronic structures. Here, we report spectra-orthogonal optical anisotropy─where polarization anisotropy is tuned independently of spectral response─in wafer-scale, one-atom-thick 2D molecular crystal (2DMC) monolayers synthesized on monolayer transition-metal dichalcogenide (TMD) crystals. Utilizing the concomitant spectral consistency and structural tunability of perylene derivatives, we demonstrate tunable optical polarization anisotropy in 2DMCs with similar spectral profiles, as confirmed by room-temperature scanning tunneling microscopy and cross-polarized reflectance microscopy. Additional angle-dependent analysis of the single-crystal and polycrystalline molecular domains reveals an epitaxial relationship between the 2DMC and TMD. In conclusion, our results establish a scalable, molecule-based 2D crystalline platform for unique and tunable functionalities unattainable in covalent 2D solids.

2D materials↗
DOE OSTI2020

The Role of Metal-Semiconductor Interface in Hybrid Perovskite Devices for High-Performance Radiation Photon Counting

Halide perovskites are promising optoelectronic semiconductors. For applications in solid-state detectors that operate in low photon flux counting mode, blocking interfaces are essential to minimize the dark current noise. Here, we investigate the interface between methylammonium lead tri-iodide (MAPbI 3 ) single crystals and commonly used high and low work function metals to achieve photon counting capabilities in a solid-state detector. Using scanning photocurrent microscopy, we observe a large Schottky barrier at the MAPbI 3 /Pb interface, which efficiently blocks dark current. Moreover, the shape of the photocurrent profile indicates that the MAPbI 3 single-crystal surface has a deep fermi level close to that of Au. Rationalized by first-principle calculations, we attribute this observation to the defects due to excess iodine on the surface underpinning emergence of deep band-edge states. The photocurrent decay profile yields a charge carrier diffusion length of 10–25 μm. Using this knowledge, we demonstrate a single-crystal MAPbI 3 detector that can count single γ-ray photons by producing sharp electrical pulses with a fast rise time of <2 μs. Overall, our study indicates that the interface plays a crucial role in solid-state detectors operating in photon counting mode.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nucleation-controlled growth of superior lead-free perovskite Cs 3 Bi 2 I 9 single-crystals for high-performance X-ray detection

The organic-inorganic hybrid lead halide perovskites have emerged as a series of star materials for solar cells, lasers and detectors. However, the issues raised by the toxic lead element and marginal stability due to the volatile organic components have severely limited their potential applications. In this work, we develop a nucleation-controlled solution method to grow large size high-quality Cs 3 Bi 2 I 9 perovskite single crystals (PSCs). Using the technique, we harvest some centimeter-sized single crystals and achieved high device performance. We find that X-ray detectors based on PSCs exhibit high sensitivity of 1652.3 μC Gy air -1 cm -2 and very low detectable dose rate of 130 nGy air s -1 , both desired in medical diagnostics. In addition, its outstanding thermal stability inspires us to develop a high temperature X-ray detector with stable response at up to 100 °C. Furthermore, PSCs exhibit high X-ray imaging capability thanks to its negligible signal drifting and extremely high stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Energy conversion and storage via photoinduced polarization change in non-ferroelectric molecular [CoGa] crystals

To alleviate the energy and environmental crisis, in the last decades, energy harvesting by utilizing optical control has emerged as a promising solution. Here we report a polar crystal that exhibits photoenergy conversion and energy storage upon light irradiation. The polar crystal consists of dinuclear [CoGa] molecules, which are oriented in a uniform direction inside the crystal lattice. Irradiation with green light induces a directional intramolecular electron transfer from the ligand to a low-spin Co III centre, and the resultant light-induced high-spin Co II excited state is trapped at low temperature, realizing energy storage. Additionally, electric current release is observed during relaxation from the trapped light-induced metastable state to the ground state, because the intramolecular electron transfer in the relaxation process is accompanied with macroscopic polarization switching at the single-crystal level. It demonstrates that energy storage and conversion to electrical energy is realized in the [CoGa] crystals, which is different from typical polar pyroelectric compounds that exhibit the conversion of thermal energy into electricity.

25 ENERGY STORAGE↗
DOE OSTI2021

The Zintl phases A In 2 As 2 (A = Ca, Sr, Ba): new topological insulators and thermoelectric material candidates

Recently, there has been a lot of interest in topological insulators (TIs), being electronic materials, which are insulating in their bulk but with the gapless exotic metallic state on their surface. The surface states observed in such materials behave as a perfect conductor thereby making them more suited for several cutting-edge technological applications such as spintronic devices. Here, we report the synthesis and structural characterization of the Zintl phases AIn 2 As 2 (A = Ca, Sr, Ba), which could become a new class of TIs. Crystal structure elucidation by single-crystal X-ray diffraction reveals that CaIn 2 As 2 and SrIn 2 As 2 are isostructural and crystallize in the EuIn 2 P 2 structure type (space group P6 3 /mmc, no. 194, Z = 2) with unit cell parameters a = 4.1482(6) Å, c = 17.726(4) Å; and a = 4.2222(6) Å, c = 18.110(3) Å, respectively. Their hexagonal structure is made up of alternating [In 2 As 2 ] 2– layers separated by slabs of A 2+ cations. BaIn 2 As 2 on the other hand crystallizes in the monoclinic EuGa 2 P 2 structure type (space group P2/m, no. 10, Z = 4) with unit cell parameters a = 10.2746(11) Å, b = 4.3005(5) Å, c = 13.3317(14) Å and β = 95.569(2)°. This structure is also layered, and it is made up of different type of polyanionic [In 2 As 2 ] 2– units and Ba 2+ cations. The valence electron count for all three compounds adheres to the Zintl-Klemm formalism, and all elements achieve closed-shell electronic configurations. Bulk electronic structure calculations indicate the opening of a bandgap E g ~ 0.03 eV (CaIn 2 As 2 and Sr 2 In 2 As 2 ), and E g ~0.21 eV (BaIn 2 As 2 ) in the absence of strain and spin–orbit coupling (SOC). Furthermore, these results argue in favor of the realization of a nontrivial topological insulator state under the influence of tensile strain and SOC. Preliminary transport properties on BaIn 2 As 2 are suggestive of a degenerate p-type semiconductor—a behavior which is sought after in thermoelectric (TE) materials. Since both TIs and excellent TE materials are known to favor the same material properties such as narrow bandgap, heavy elements, and strong SOC, these three Zintl phases are also projected as candidates TE materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Charge transport and antiferromagnetic ordering in nitroxide radical crystals

Nonconjugated radical polymers and small molecules are employed as functional materials in organic electronic devices. Furthermore, the unpaired electrons on these materials have permanent magnetic moments, making these materials promising candidates for organic magnets. Through molecular design, strong antiferromagnetic and ferromagnetic ordering have been achieved in conjugated materials. However, the magnetic properties of nonconjugated radical polymers have only shown weak magnetic interactions among the open-shell sites due to the large mean separation between radicals in typical materials. Here, we have designed, synthesized, and crystalized two open-shell molecules that used molecular engineering to control the assembly of the open-shell sites into a strong antiferromagnetically ordered network. The strong antiferromagnetic interaction is evidenced by a high paramagnetic-to-antiferromagnetic transition temperature of ~40 K. This high transition temperature was a result of a high spin exchange coupling constant J of about –20 cm –1 , which was suggested by both experimental and computed coupling parameters given by the energy difference between high-spin and low-spin broken-symmetry structures. In addition, a single-crystal electrical conductivity of ~10 –3 S m –1 was achieved, which indicated the potential of this material in electronic applications. As a result, this work provides an insight into a design strategy for radical-based electronic and magnetic materials through proper molecular structure modifications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microscopic piezoelectric behavior of clamped and membrane (001) PMN-30PT thin films

Bulk single-crystal relaxor-ferroelectrics, like Pb(Mg 1/3 Nb 2/3 )O- 3 -PbTiO 3 (PMN-PT), are widely known for their large piezoelectricity. This is attributed to polarization rotation, which is facilitated by the presence of various crystal symmetries for compositions near a morphotropic phase boundary. Relaxor-ferroelectric thin films, which are necessary for low-voltage applications, suffer a reduction in their piezoelectric response due to clamping by the passive substrate. To understand the microscopic behavior of this adverse phenomenon, we employ the AC electric field driven in-operando synchrotron x-ray diffraction on patterned device structures to investigate the piezoelectric domain behavior under an electric field for both a clamped (001) PMN-PT thin film on Si and a (001) PMN-PT membrane released from its substrate. In the clamped film, the substrate inhibits the field-induced rhombohedral (R) to tetragonal (T) phase transition resulting in a reversible R to Monoclinic (M) transition with a reduced longitudinal piezoelectric coefficient d 33 < 100 pm/V. Releasing the film from the substrate results in recovery of the R to T transition and results in a d 33 > 1000 pm/V. Here, using diffraction with spatial mapping, we find that lateral constraints imposed by the boundary between the active and inactive materials also inhibit the R to T transition. Phase-field calculations on both clamped and released PMN-PT thin films simulate our experimental findings. Resolving the suppression of thin film piezoelectric response is critical to their application in piezo-driven technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

PIONEER, a high-resolution single-crystal polarized neutron diffractometer

PIONEER is a high Q-resolution, single-crystal, polarized neutron diffractometer at the Second Target Station (STS), Oak Ridge National Laboratory. It will provide the unprecedented capability of measuring tiny crystals (0.001 mm 3 , i.e., x-ray diffraction size), ultra-thin films (10 nm thickness), and weak structural and magnetic transitions. PIONEER benefits from the increased peak brightness of STS cold-neutron sources and uses advanced Montel mirrors that are able to deliver a focused beam with a high brilliance transfer, a homogeneous profile, and a low background. Monte Carlo simulations suggest that the optimized instrument has a high theoretical peak brilliance of 2.9 × 10 12 n cm -2 sr -1 Å -1 s -1 at 2.5 Å at the sample position, within a 5 × 5 mm 2 region and a ±0.3° divergence range. The moderator-to-sample distance is 60 m, providing a nominal wavelength band of 4.3 Å with a wavelength resolution better than 0.2% in the wavelength range of 1.0–6.0 Å. PIONEER is capable of characterizing large-scale periodic structures up to 200 Å. With a sample-to-detector distance of 0.8 m, PIONEER accommodates various sample environments, including low/high temperature, high pressure, and high magnetic/electric field. Additionally, a large cylindrical detector array (4.0 sr) with a radial collimator is planned to suppress the background scattering from sample environments. Bottom detector banks provide an additional 0.4 sr coverage or can be removed if needed to accommodate special sample environments. We present virtual experimental results to demonstrate the scientific performance of PIONEER in measuring tiny samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Epitaxial growth of conducting perovskite SrTiO3 on (0001) c-axis sapphire using a γ-Al2O3 intermediate layer

Epitaxial growth of complex oxides on large-area wafers, such as sapphire and silicon, represents a key step toward scalable oxide device production. Solid phase epitaxy allows the synthesis of γ-Al 2 O 3 on α-Al 2 O 3 and provides a template with a matched lattice constant and appropriate cubic symmetry for subsequent heteroepitaxial growth of perovskite complex oxides. Nb-doped SrTiO 3 thin films were deposited epitaxially on (111)-oriented γ-Al 2 O 3 intermediate layers on (0001) c-axis-oriented sapphire α-Al 2 O 3 crystals using pulsed laser deposition. The Nb:SrTiO 3 thin films with a thickness of 53 nm, grown at 700 °C on γ-Al 2 O 3 , reached fully relaxed lattice parameters and were epitaxially oriented with respect to the substrate. Nb:SrTiO 3 layers deposited using identical deposition conditions directly on α-Al 2 O 3 , without the γ-Al 2 O 3 intermediate layer, were polycrystalline. The sheet conductivity of Nb:SrTiO 3 grown on γ-Al 2 O 3 /α-Al 2 O 3 is more than ten times higher than that of Nb:SrTiO 3 grown directly on α-Al 2 O 3 without the γ-Al 2 O 3 layer. The results point to new directions for the integration of (111)-oriented pseudocubic perovskite complex oxides and the integration of epitaxial complex oxides over larger areas using α-Al 2 O 3 single-crystal substrates.

Atomic force microscopy↗
DOE OSTI2021

Effect of interfacial structures on phonon transport across atomically precise Si/Al heterojunctions

Phonons are important carriers of energy and information in many cryogenic devices used for quantum information science and in fundamental physics experiments such as dark matter detectors. In these systems phonon behavior can be dominated by interfaces, hence there is increasing demand for a more detailed understanding of interfacial phonon transport in relevant material systems. Previous studies have focused on understanding thermal transport over the entire phonon spectrum at and above room temperature. At ultra-low temperatures, however, knowledge is missing regarding athermal phonon behavior due to the challenge in modeling the extreme conditions in micro-scale, heterogeneous cryogenic systems, as well as extracting single-phonon information from a large ensemble. In this work, we delineate interfacial phonon transport using a combination of classical molecular dynamics (MD) and phonon wave packet simulations, to illustrate the consistency and differences between the ensemble- and single-phonon dynamics. We consider three single-crystal Si surface reconstructions --- (1×1), (v3×v3) and (7×7) --- and model both experimentally observed Si(1×1)/Al interfaces and hypothesized Si(v3×v3)/Al and Si(7×7)/Al interfaces. The overall interfacial thermal conductance calculated from non-equilibrium MD shows that for the Si(1×1)/Al system, the presence of Al twin grain boundaries can hinder phonon transport and reduce thermal conductance by 2--12% relative to single-crystal Al; whereas the Si (v3×v3) and (7×7) reconstructions can enhance it by 6--19%. Normal mode decomposition reveals that both the increase and decrease in conductance are related to inelastic phonon scattering. Single-phonon wave packet simulations show results consistent with NEMD, while further suggesting that phonon polarization conversion is significant even when elastic transmission dominates, and that the interfacial structures have anisotropic impacts on atomic vibrations along different lattice directions. Our findings suggest alternative perspectives in achieving selective phonon transport through controlling interfacial structures of materials with atomically-precise fabrication techniques, and that the phonon wave packet formalism is a potentially powerful method for developing a detailed understanding of non-equilibrium phenomena in the low-temperature limit.

Lu, Zexi↗
DOE OSTI2022

Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer

Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.

Han, Ne Myo↗
DOE OSTI2022

Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer

Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.

Han, Ne Myo↗
DOE OSTI2024

Dopant Segregation in Single-Crystal Optical Fiber Grown via the Laser-Heated Pedestal Growth Technique

Single crystal (SC) optical fiber has promising potential to be used for optical fiber sensing applications in harsh conditions due to its robustness to high temperature, high radioactivity, and resistance to chemical corrosion as compared to optical sensors using silica fiber. However, SC fiber grown via the laser-heated pedestal growth (LHPG) technique innately does not have a core-cladding structure found in standard optical fiber, resulting in optical losses. In this work we investigate optimization of the growth parameters of a two LHPG process used to grow SC fiber with a graded index via introduction of dopants to the feedstock material. Feedstock material is fabricated with the first LHPG device, then sol-gel dip-coated to create outer films of dopant material. The dip-coated feedstock is used to grow SC fiber in which segregation of the dopant constituents occurs, resulting in a graded index of refraction across the fiber, and an effective core-cladding structure. Hardware and software improvements to both LHPG systems are presented and the growth parameters for short pieces of ~320-330 μm diameter YAG fiber has been established. Characterization techniques/procedures have also been established for future grown SC fiber. These improvements and preparations are anticipated to result in a significant increase in grown fiber quality with a similar growth rate to that previously established.

Lander, Gary↗