Search NASA⌕ Search

SEARCH · Search NASA

Results for “soft modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Possible continuous transition from fractional quantum Hall to stripe phase at ν e = 7 / 3

We study the phase diagram of the ν e = 7/3 state in the N=1 Landau level in the presence of band mass anisotropy. Using the density matrix renormalization group on an infinite cylinder geometry, we find a continuous transition from the topologically ordered Laughlin fractional quantum Hall state to a stripe phase with a period of approximately five and a half magnetic lengths. The transition is driven by the condensation of the magnetoroton mode which becomes gapless at the critical point. We interpret the transition within the composite-boson theory as the onset of stripe order in a superfluid background, resulting from the roton mode going soft.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Extended linear-in- T resistivity due to electron-phason scattering in moiré superlattices

Due to its incommensurate nature, moiré superlattices host not only acoustic phonons but also another type of soft collective modes called phasons. Here, we investigate the impact of electron-phason scattering on the transport properties of moiré systems. We show that the resistivity can scale linearly with temperature down to temperatures much lower than the Bloch-Grüneisen scale defined by electron kinematics on the Fermi surface. This result stems from the friction between layers, which transfers phason spectral weight to a broad diffusive low-energy peak in the mechanical response of the system. As a result, phason scattering becomes a very efficient channel for entropy production at low temperatures. We also consider the contributions of phasons to thermodynamic properties at low temperatures and find a “metallic-like” linear-in-T behavior for the specific heat, despite the fact that this behavior is due to mechanical and not electronic degrees of freedom. Finally, we discuss the implications of this finding to reports of linear-in-T resistivity in the phase diagram of twisted bilayer graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Theoretical investigation of charge density wave instability in CuS 2

The existence of a charge density wave (CDW) in transition-metal dichalcogenide (TMDC) CuS 2 has remained undetermined since its first experimental synthesis nearly 50 years ago. Despite conflicting experimental literature regarding its low-temperature structure, there exists no theoretical investigation of the phonon properties and lattice stability of this material. By studying the first-principles electronic structure and phonon properties of CuS 2 at various electronic temperatures, we identify temperature-sensitive soft phonon modes which unveil a previously unreported Kohn anomaly at approximately 100 K. Variation of the electronic temperature shows the presence of two distinct phases, characterized at low electronic temperature by a 2 × 2 × 2 periodic charge modulation associated with the motion of the S 2 dimers. We find this is driven by a slight orbital occupation imbalance of the copper d and sulfur p orbitals, reminiscent of the Jahn-Teller effect in finite systems. Investigation of the Fermi surface presents a potential Fermi surface nesting vector related to the location of the Kohn anomaly and observed band splittings in the unfolded band structure. The combination of these results suggests a strong possibility of CDW order in CuS 2 . Further study of CuS 2 in monolayer form finds no evidence of a CDW phase, as the identified bulk periodic distortions cannot be realized in two dimensions. This behavior sets this material apart from other transition-metal dichalcogenide materials, which exhibit a charge density wave phase down to the two-dimensional limit. As CDW in TMDC materials is considered to compete with superconductivity, the lack of a CDW in monolayer CuS 2 suggests the possibility of enhanced superconductivity relative to other transition-metal dichalcogenides. Altogether, our work identifies CuS 2 as a previously unrealized candidate to study the interplay of superconductivity, CDW order, and dimensionality.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Revealing a distortive polar order buried in the Fermi sea

Polar metals are challenging to identify spectroscopically because the fingerprints of electric polarization are often obscured by the presence of screening charges. Here, we unravel unambiguous signatures of a distortive polar order buried in the Fermi sea by probing the nonlinear optical response of materials driven by tailored terahertz fields. We apply this strategy to investigate the topological crystalline insulator Pb 1–x Sn x Te, tracking its soft phonon mode in the time domain and observing the occurrence of inversion symmetry breaking as a function of temperature. By combining measurements across the material’s phase diagram with ab initio calculations, we demonstrate the generality of our approach. These results highlight the potential of terahertz driving fields to reveal polar orders coexisting with itinerant electrons, thus opening additional avenues for material discovery.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

From shockwaves to the gravitational memory effect

We study the relationship between shockwave geometries and the gravitational memory effect in four-dimensional asymptotically flat spacetime. In particular, we show the ’t Hooft commutation relations of shockwave operators are equivalent to the commutation relation between soft and Goldstone modes parametrizing a sector of the gravitational phase space. We demonstrate this equivalence via a diffeomorphism that takes a shockwave metric to a metric whose transverse traceless component is the gravitational memory. The shockwave momentum in ’t Hooft’s analysis is related to the soft graviton mode, which is responsible for the memory effect, while the shift in the shockwave position is related to the Goldstone mode. This equivalence opens new directions to utilize the gravitational memory effect to explore the observational implications of shockwave geometries in flat space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Diamond of infrared equivalences in abelian gauge theories

We demonstrate a tree-level equivalence between four distinct infrared objects in (d+2)-dimensional Abelian gauge theories. These are (i) the large gauge charge Q ϵ where the function ϵ on the sphere parametrizing large gauge transformations is identified with the Goldstone mode θ of spontaneously broken large gauge symmetry; (ii) the soft effective action that captures the dynamics of the soft and Goldstone modes; (iii) the edge mode action with Neumann boundary conditions; and (iv) the Wilson line dressing of a scattering amplitude, including a novel dressing for soft photons, which have local charge distributions despite having vanishing global charge. The promotion of the large gauge parameter to the dynamical Goldstone and the novel dressing of soft gauge particles give rise to intriguing possibilities for the future study of infrared dynamics of gauge theories and gravity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

High-pressure polymorphism in pyridine

Single crystals of the high-pressure phases II and III of pyridine have been obtained by in situ crystallization at 1.09 and 1.69 GPa, revealing the crystal structure of phase III for the first time using X-ray diffraction. Phase II crystallizes in P 2 1 2 1 2 1 with Z ′ = 1 and phase III in P 4 1 2 1 2 with Z ′ = ½. Neutron powder diffraction experiments using pyridine-d 5 establish approximate equations of state of both phases. The space group and unit-cell dimensions of phase III are similar to the structures of other simple compounds with C 2v molecular symmetry, and the phase becomes stable at high pressure because it is topologically close-packed, resulting in a lower molar volume than the topologically body-centred cubic phase II. Phases II and III have been observed previously by Raman spectroscopy, but have been mis-identified or inconsistently named. Raman spectra collected on the same samples as used in the X-ray experiments establish the vibrational characteristics of both phases unambiguously. The pyridine molecules interact in both phases through CH...π and CH...N interactions. The nature of individual contacts is preserved through the phase transition between phases III and II, which occurs on decompression. A combination of rigid-body symmetry mode analysis and density functional theory calculations enables the soft vibrational lattice mode which governs the transformation to be identified.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evaluating switch lifetime in soft-switched single-stage differential-mode SST

The reliability of semiconductor switches in single-stage differential-mode solid-state transformers (DM-SSTs) has not been systematically evaluated under soft-switching operation and realistic grid conditions. This paper presents a switch-level reliability analysis for soft-switched and hard-switched DM-SST configurations by integrating converter-specific power loss modeling with empirical lifetime prediction. Analytical derivation of device current profiles specific to the DM-SST is used to characterize electrothermal stress, which is then mapped to lifetime using degradation models obtained from power cycling tests (PCTs). Applied to realistic SST load profiles and grid voltage variations, this approach provides a probabilistic prediction of switch lifetime for the DM-SST. Lifetime estimates for both SiC MOSFETs and Si IGBTs are presented, offering insight into device degradation under converter operating conditions. The results quantify the reliability benefits of soft switching in single-stage SSTs, highlighting how switching dynamics influence long-term switch degradation.

14 SOLAR ENERGY↗
DOE OSTI2020

Soft sample deformation, damage and induced electromechanical property changes in contact- and tapping-mode atomic force microscopy

Probe-induced soft sample damage in atomic force microscopy (AFM), as well as the resulting alteration of local mechanical and electrical properties of the material are explored, specifically comparing contact-mode and intermittent-contact-mode imaging methods. In our experiments, performed on conductive polymer films, induced changes are present in contact-mode imaging while they are negligible or absent in tapping-mode imaging. Here, to understand this result, a viscoelastic parameter extraction is performed, which suggests that permanent sample deformation can readily occur for tip-sample interactions with a duration on the timescale of contact-mode interactions. Using the extracted viscoelastic parameters, a dynamic AFM simulation is conducted, which suggests that the material responds more elastically with reduced or absent sample damage in tapping-mode AFM, due to the higher rate of mechanical deformation and shorter timescales.

42 ENGINEERING↗
DOE OSTI2023

Concurrent characterization of GaN MOSHEMT gate leakage via electrical and thermoreflectance measurements

In this work, we report the first concurrent use of electrical and thermal characterization, via thermoreflectance, to analyze Time Dependent Dielectric Breakdown in GaN MOSHEMTs. Electrically stressing the devices until a failure occurs, then evaluating them via thermoreflectance, revealed a geometric dependence of the failure mode. Further, all soft breakdowns occurred at the mesa edge where the electric field strength was at its strongest, and tunneling current density was at its highest. This breakdown phenomenon at the mesa edge has been seen previously in GaN HEMTs employing a mesa architecture. Possible approaches to mitigate these failures in MOSHEMTs are proposed.

42 ENGINEERING↗
DOE OSTI2020

Origin of Disorder Tolerance in Piezoelectric Materials and Design of Polar Systems

Current high-performing piezoelectric materials are dominated by perovskites that rely on soft optical phonon modes stabilized by disorder near a morphotropic phase boundary and a unique resilience of the polar response to that disorder. To identify structural families with similar resilience, in this study we develop a first-principles sensitivity analysis approach to determine the effect of disorder on the piezoelectric response for structures in the Materials Project database. In well-known piezoelectric systems, the lattice dynamics, rather than internal strain or dielectric, control the polar response. Additionally, multiple stable optical phonon modes are found to contribute to the piezoelectric response, providing a fingerprint for disorder tolerance. A multiple-phonon mode criterion is used to evaluate candidate materials for disorder-tolerant piezoelectric prototype systems. Five promising structures are altered through chemical substitution, generating potential MPB end points with large piezoelectric responses beyond perovskites including Akermanite Sr 2 x Ca 2 – 2 x CoSi 2 O 7 , which exhibits a nearly 20% increase in response at the 50% composition.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of polarization density waves in SrTiO 3

The nature of the incipient ferroelectric transition in SrTiO 3 has been a long-standing puzzle in condensed matter physics. One explanation involves the competition between ferroelectricity and an instability characterized by the mesoscopic modulation of the polarization. These polarization density waves, which should intensify near the quantum critical point, break local inversion symmetry and are difficult to characterize with conventional X-ray scattering methods. Here, in this study, we probe inversion symmetry breaking at finite momenta and visualize the instability of the polarization at the nanometre scale in SrTiO3 by combining a femtosecond X-ray free-electron laser with terahertz coherent control methods. We found polar-acoustic collective modes that are soft, particularly at the tens of nanometre scale. These precursor collective excitations provide evidence for the conjectured mesoscopic-modulated phase in SrTiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electronic structure and lattice dynamics of 1⁢𝑇−VSe 2 : Origin of the three-dimensional charge density wave

To characterize in detail the charge density wave (CDW) transition of 1⁢𝑇−VSe 2 , its electronic structure and lattice dynamics are comprehensively studied by means of x-ray diffraction, muon spectroscopy, angle resolved photoemission (ARPES), diffuse and inelastic x-ray scattering, and state-of-the-art first-principles density functional theory calculations. Resonant elastic x-ray scattering does not show any resonant enhancement at either V or Se, indicating that the CDW peak at the 𝐾 edges describes a purely structural modulation of the electronic ordering. ARPES experiments identify (i) a pseudogap at 𝑇 > 𝑇⁢ CDW , which leads to a depletion of the density of states in the ML-M'L' plane at 𝑇 < 𝑇⁢ CDW , and (ii) anomalies in the electronic dispersion reflecting a sizable impact of phonons on it. A diffuse scattering precursor, characteristic of soft phonons, is observed at room temperature (RT) and leads to the full collapse of the low-energy phonon (𝜔 1 ) with propagation vector (0.25 0 −0.3) r.l.u. Here, we show that the frequency and linewidth of this mode are anisotropic in momentum space, reflecting the momentum dependence of the electron-phonon interaction (EPI), hence demonstrating that the origin of the CDW is, to a much larger extent, due to the momentum dependent EPI with a small contribution from nesting. The pressure dependence of the 𝜔 1 soft mode remains nearly constant up to 13 GPa at RT, with only a modest softening before the transition to the high-pressure monoclinic C2/m phase. The wide set of experimental data is well captured by our state-of-the art first-principles anharmonic calculations with the inclusion of van der Waals corrections in the exchange-correlation functional. The comprehensive description of the electronic and dynamical properties of VSe 2 reported here adds important pieces of information to the understanding of the electronic modulations in the family of transition-metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

X-ray dichroism as a probe of orbital quenching and unquenching induced by optically excited Jahn-Teller modes

The use of soft-X-ray spectroscopy to probe changes in the ground-state due to vibronic excitations is studied. The changes in L-edge X-ray absorption on divalent cobalt in the presence of a vibrating Jahn-Teller distortion are calculated. For linear dichroism, a strong dependence on the distortion is obtained reflecting the change in the local quadrupole moment due to the changes in the xy versus yz/zx hole densities during the oscillation. Here, in the presence of a magnetic moment, significant variations in the circular dichroic signal are obtained related to the quenching and unquenching of the orbital angular momentum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Superconductivity from the Slater mode: Application to KTaO 3 heterostructures

Superconductivity has been observed for the 2D electron gas (2DEG) at the interface of KTaO 3 with other oxides, with a transition temperature about an order of magnitude higher than its 3⁢𝑑 cousin SrTiO 3 . Here, the superconducting transition temperature is strongly dependent on the orientation of the interface. Motivated by this observation, we study pairing due to the exchange of the soft transverse optic phonon mode characteristic of quantum paraelectrics and use the resulting theory to comment on the nature of superconductivity of this 2DEG. We find (1) an orientation dependence consistent with experiment along with an anisotropic gap function, but (2) a BCS coupling constant that is smaller than needed and so must be augmented by contributions from other phonons to be consistent with the observed values of 𝑇 𝑐 .

Norman, M. R. [Argonne National Laboratory (ANL), ↗
DOE OSTI2022

Magnetic Control of Soft Chiral Phonons in PbTe

We report PbTe crystals have a soft transverse optical phonon mode in the terahertz frequency range, which is known to efficiently decay into heat-carrying acoustic phonons, resulting in anomalously low thermal conductivity. Here, we studied this phonon via polarization-dependent terahertz spectroscopy. We observed softening of this mode with decreasing temperature, indicative of incipient ferroelectricity, which we explain through a model including strong anharmonicity with a quartic displacement term. In magnetic fields up to 25 T, the phonon mode splits into two modes with opposite handedness, exhibiting circular dichroism. Their frequencies display Zeeman splitting together with an overall diamagnetic shift with increasing magnetic field. Using a group-theoretical approach, we demonstrate that these observations are the result of magnetic field-induced morphic changes in the crystal symmetries through the Lorentz force exerted on the lattice ions. Thus, our Letter reveals a novel process of controlling phonon properties in a soft ionic lattice by a strong magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermal conductance of interfaces between titanium nitride and group IV semiconductors at high temperatures

Measuring the temperature dependence of material properties is a standard method for better understanding the microscopic origins for that property. Surprisingly, only a few experimental studies of thermal boundary conductance at high temperatures exist. This lack of high temperature data makes it difficult to evaluate competing theories for how inelastic processes contribute to thermal conductance. To address this, we report time domain thermoreflectance measurements of the thermal boundary conductance for TiN on diamond, silicon-carbide, silicon, and germanium between 120 and 1000 K. In all systems, the interface conductance increases monotonically without stagnating at higher temperatures. For TiN/SiC interfaces, G ranges from 330 to 1000 MW/m2-K, with a room temperature conductance of 750 MW/m2-K. The interface conductance for TiN/diamond ranges from 140 to 950 MW/m2-K. Notably, for all four interfacial systems, the conductance continues to increase with temperature even after all phonon modes in the vibrationally soft material are thermally excited. This observation suggests that inelastic processes are significant contributors to the thermal conductance in all four interfacial systems, regardless of whether the materials forming the interface are vibrationally similar or dissimilar. Our study fills a notable gap in the literature for how interfacial conductance evolves at high temperatures and tests burgeoning theories for the role of inelastic processes in interfacial thermal transport.

Physics↗