SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A systematic photoelectron spectroscopy and theoretical study of divalent transition metal EDTA complexes illustrating the intrinsic correlations of redox properties in the gas and solution phases.
To extend the service life of Ni-based superalloys, refractory metal coatings are often used. However, direct bonding between metals with dissimilar crystal structure promotes brittle intermetallic phase formation. This work presents a computational thermodynamic framework for high throughput design of functionally graded interlayers to suppress deleterious phases that may form at the interlayer. The Thermo-Calc software package was used to screen candidate metallic interlayer elements based on stability of solid-solution phases. Vanadium was identified as a promising interlayer due to its consistent suppression of intermetallic phases. Temperature-dependent phase diagram mapping between 600 and 1000 °C guided selection of a compositional pathway that significantly reduced intermetallic formation compared to directly joining the Ni-based and Nb refractory alloys. Time–temperature–transformation analysis was performed to assess whether equilibrium-predicted phases are kinetically accessible along regions of the graded path where non-solid-solution phases are not fully suppressed. The methodology was further applied to additional Ni-based alloy and coating systems, illustrating its transferability as an approach for rapid computational design of graded interlayers in dissimilar high-temperature materials.
Single-phase concentrated solid–solution alloys exhibit enhanced mechanical characteristics and radiation damage resistance, making them promising candidate materials for applications involving an exposure to rapid localized energy deposition. We use large-scale atomistic modeling to investigate the mechanisms of the generation of vacancies, dislocations, stacking faults, and twin boundaries in Ni, Ni 50 Fe 50 , Ni 80 Fe 20 , and Ni 80 Cr 20 targets irradiated by short laser pulses in the regime of melting and resolidification. The decrease in the thermal conductivity and strengthening of the electron–phonon coupling due to the intrinsic chemical disorder in the solid-solution alloys are found to have important implications on localization of the energy deposition and generation of thermoelastic stresses. The interaction of the laser-induced stress waves with the melting front is found to play a key role in roughening of the crystal–liquid interface and generation of dislocations upon the solidification. A common feature revealed in the structural analysis of all irradiated targets is the presence of high vacancy concentrations exceeding the equilibrium values at the melting temperature by about an order of magnitude. On the basis of the results of molecular dynamics simulations of solidification occurring at fixed levels of undercooling, the generation of vacancies is correlated with the velocity of the solidification front, and the processes responsible for creating the strong vacancy supersaturation are revealed. The suppression of the vacancy generation in the solid–solution alloys is also revealed and related to combined effect of enhanced vacancy mobility and higher energy of the vacancy formation in the alloy systems. The analysis of the first atomic shells surrounding the vacancy sites in Ni–Fe alloys uncovers the preference for the vacancy sites to be surrounded by Fe atoms and suggests that atomic-scale chemical heterogeneities may play an important role in defining the behavior and properties of the single-phase concentrated solid-solution alloys.
A process for producing methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.
A process for producing methane or methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methane or methanol, and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.
Highly refined capabilities of the shape-controlled solution-phase synthesis of metal nanocrystals (NCs) allow the generation of NCs with faceted nonequilibrium shapes, which optimize properties for target applications such as catalysis and plasmonics. Often, for such applications and also for TEM analysis, the NCs are removed from the solution-phase environment. We explore the postsynthesis evolution of these metastable NCs in a high-vacuum TEM environment. Specifically, here we analyze their reshaping toward the equilibrium Wulff shapes mediated by surface diffusion, where such reshaping degrades the above-mentioned optimized properties. Typical sizes for these NCs range from 5 to 30 nm or 10 3 –10 6 atoms, and reshaping often occurs on the time scale of minutes for temperatures around, say, 400 °C. We discuss the development of predictive stochastic atomistic-level models for NC evolution with a realistic description of surface diffusion. These models, in contrast to Molecular Dynamics, can naturally address the relevant time and length scales for these systems. KMC simulation results for the stochastic models are described, focusing on the reshaping of slightly elongated nanorods and of mildly truncated octahedra and nanocubes. In addition, we review appropriate theoretical formulations for reshaping, which involves the nucleation and growth on 2D islands or layers on outer facets of the NC. We note the limitations of classical nucleation theory in some scenarios and demonstrate the successes of a more fundamental and general master equation-based analysis.
Nitrogen-vacancy (NV) centers in diamond are a promising platform for nanoscale NMR sensing. Despite significant progress toward using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. Such sensing requires that target molecules are immobilized within nanometers of NV centers with long spin coherence. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C–H bonds on single-crystal diamond surfaces under ambient conditions using visible light, forming C–F, C–Cl, C–S, and C–N bonds at the surface. This method is compatible with NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof-of-principle demonstration, we use shallow ensembles of NV centers to detect nuclear spins from surface-bound functional groups. Our approach to surface functionalization opens the door to deploying NV centers as a tool for chemical sensing and single-molecule spectroscopy.
We posed the question of what happens to a protein that is known to grow as an n-mer when it is placed in solution conditions where it is monomeric. The trypsin-treated, or cut, form of the protein canavalin (CCAN) has been shown to nucleate and grow crystals as a trimer from neutral to slightly acidic solutions. Under these conditions the solution is composed almost wholly of trimers. The crystalline protein can be readily dissolved by weakly basic solution, which has been proposed to result in a solution that is monomeric. There are three possible outcomes to an attempt at crystallization of the protein under monomeric (high pH) conditions: 1) we will obtain the same crystals as under trimer conditions, but at different protein concentrations governed by the self association equilibria; 2) we will obtain crystals having a different symmetry, based upon a monomeric growth unit; 3) we will not obtain crystals. Obtaining the first result would be indicative that the solution-phase self-association process is critical to the crystal nucleation and growth process. The second result would be less clear, as it may also reflect a pH-dependent shift in the trimer-trimer molecular interactions. The third result, particularly for experiments in the transition pH's between trimeric and monomeric CCAN, would indicate that the monomer does not crystallize, and that solution phase self association is not part of the crystal nucleation and growth path. Results are presented for crystallization experiments of CCAN over the pH 6.4 to 9.6 range. Fluorescence anisotropy, light scattering, and gel filtration experiments show that the solutions are primarily trimers, with association to form larger species occurring as a function of protein concentration.
A number of factors, the shape and charge distribution anisotropy, multiple components in the solution (buffer + counter ion, precipitant, protein, and water), conformational flexibility, and large numbers of intermolecular contacts, all serve as complicating variables in understanding the nucleation and growth mechanism for macromolecules. Intermolecular contacts include hydrogen bonds, van der Waals, hydrophobic, salt bridges, and ion-mediated contacts. The latter interactions are stronger and give specificity while the others are weaker, more prevalent, and more promiscuous, i.e., can lead to a range of possible molecular interactions. We propose that for tetragonal lysozyme, and by extension many other monomeric proteins, there is a solution-phase assembly process to form 4(sub 3) helix structures that are the basic unit for nucleation. The formation of these structures is continuous and concentration dependent. They subsequently also servc as growth units, with that process then being a recapitulation of the nucleation process. The advantages of solution phase assembly are the immediate burying of the strongest interactions, removing them from subsequent participation in the nucleation and growth process, and the introduction of symmetry into the system, which also assists in the assembly process.
In this work, we demonstrate that solution-phase semiconductor nanocrystals (NCs) undergo photoinduced rotation in an external electric field. Present measurements backed by theoretical calculations show that the rotation of colloidal NCs is driven by the excited-state dipole moment, which is counterbalanced by the solvent viscosity drag. Corresponding angular velocities range from 0.5°/ns for cubic CsPbBr 3 NCs to 3°/ns for nanoparticles with a large photoinduced charge separation (CdSe/CdS core–shell and dot-in-a-rod NCs). Because of photoinduced rotation, solution-phase semiconductor NCs exhibited an order-of-magnitude increase in the spectral changes caused by the quantum confined Stark effect (QCSE), compared to solid NC assemblies. The enhanced QCSE of colloidal NCs reflected their global alignment in solution, which could be retained in a solid environment by slow crystallization. Overall, we expect that the demonstrated phenomenon of the colloidal nanocrystal rotation in an electric field will open up new avenues for developing electro-optical and voltage-sensitive applications.
Psilocybin {systematic name: 3-[2-(dimethylamino)ethyl]-1 H -indol-4-yl dihydrogen phosphate} is a zwitterionic tryptamine natural product found in numerous species of fungi known for their psychoactive properties. Following its structural elucidation and chemical synthesis in 1959, purified synthetic psilocybin has been evaluated in clinical trials and has shown promise in the treatment of various mental health disorders. In a recent process-scale crystallization investigation, three crystalline forms of psilocybin were repeatedly observed: Hydrate A, Polymorph A, and Polymorph B. The crystal structure for Hydrate A was solved previously by single-crystal X-ray diffraction. This article presents new crystal structure solutions for the two anhydrates, Polymorphs A and B, based on Rietveld refinement using laboratory and synchrotron X-ray diffraction data, and density functional theory (DFT) calculations. Utilizing the three solved structures, an investigation was conducted via Rietveld method (RM) based quantitative phase analysis (QPA) to estimate the contribution of the three different forms in powder X-ray diffraction (PXRD) patterns provided by different sources of bulk psilocybin produced between 1963 and 2021. Over the last 57 years, each of these samples quantitatively reflect one or more of the hydrate and anhydrate polymorphs. In addition to quantitatively evaluating the composition of each sample, this article evaluates correlations between the crystal forms present, corresponding process methods, sample age, and storage conditions. Furthermore, revision is recommended on characterizations in recently granted patents that include descriptions of crystalline psilocybin inappropriately reported as a single-phase `isostructural variant.' Rietveld refinement demonstrated that the claimed material was composed of approximately 81% Polymorph A and 19% Polymorph B, both of which have been identified in historical samples. In this article, we show conclusively that all published data can be explained in terms of three well-defined forms of psilocybin and that no additional forms are needed to explain the diffraction patterns.
This study examined the solution-phase exchange reactions of triphenylphosphine (PPh 3 ) ligands on Au 8 L 7 2+ (L = PPh 3 ) gold clusters with three different tolyl ligands using electrospray ionization mass spectrometry to provide insight into how steric differences in the phosphines influence the extent of ligand exchange and the stability of the resulting mixed-phosphine clusters.
By combining colloidal nanocrystal synthesis, self-assembly, and solution phase epitaxial growth techniques, we developed a general method for preparing single dot thick atomically attached quantum dot (QD) superlattices with high-quality translational and crystallographic orientational order along with state-of-the-art uniformity in the attachment thickness. The procedure begins with colloidal synthesis of hexagonal prism shaped core/shell QDs (e.g., CdSe/CdS), followed by liquid subphase self-assembly and immobilization of superlattices on a substrate. Solution phase epitaxial growth of additional semiconductor material fills in the voids between the particles, resulting in a QD-in-matrix structure. The photoluminescence emission spectra of the QD-in-matrix structure retains characteristic 0D electronic confinement. Importantly, annealing of the resulting structures removes inhomogeneities in the QD–QD inorganic bridges, which our atomistic electronic structure calculations demonstrate would otherwise lead to Anderson-type localization. The piecewise nature of this procedure allows one to independently tune the size and material of the QD core, shell, QD–QD distance, and the matrix material. These four choices can be tuned to control many properties (degree of quantum confinement, quantum coupling, band alignments, etc.) depending on the specific applications. Lastly, cation exchange reactions can be performed on the final QD-in-matrix, as demonstrated herein with a CdSe/CdS to HgSe/HgS conversion.
Abstract Hollandite has been studied as a candidate ceramic waste form for the disposal of high‐level radioactive waste due to its inherent leach resistance and ability to immobilize alkaline‐earth metals such as Cs and Ba at defined lattice sites in the crystallographic structure. The chemical and structural complexity of hollandite‐type phases developed for high‐level waste immobilization limits the systematic experimental research that is required to understand phase development due to the large number of potential additives and compositional ranges that must be evaluated. Modeling the equilibrium behavior of the complex hollandite‐forming oxide waste system would aid in the design and processing of hollandite waste forms by predicting their thermodynamic stability. Thus, a BaO–Cs 2 O–TiO 2 –Cr 2 O 3 –Al 2 O 3 –Fe 2 O 3 –FeO–Ga 2 O 3 thermodynamic database was developed in this work according to the CALPHAD methodology. The compound energy formalism was used to model solid solution phases such as hollandite while the two‐sublattice partially ionic liquid model characterized the oxide melt. Results of model optimizations are presented and discussed including a 1473 K isothermal BaO–Cs 2 O–TiO 2 pseudo‐ternary diagram that extrapolates phase equilibrium behavior to regions not experimentally explored.
CO 2 is an abundant C 1 feedstock for fuel and chemical synthesis. We have previously demonstrated experimentally a stepwise insertion of CO 2 into a [Cu 2 H 2 ] core via a solid–gas in crystallo reaction, forming formate species that are unstable and inaccessible under solution-phase conditions. This work elucidates how structural confinement within the crystal lattice enables such selective reactivity. In particular, co-crystallized tetrahydrofuran molecules induce site asymmetry around the [Cu 2 H 2 ] unit, modulating both the local electronic environment and CO 2 diffusion pathways. Using a multiscale computational approach that combines classical molecular mechanics, hybrid quantum mechanics/molecular mechanics molecular dynamics, and enhanced-sampling free energy calculations, we demonstrate how site asymmetry affects CO 2 binding affinities and reaction pathways. These results provide detailed mechanistic insight into CO 2 insertion and hydride transfer, highlighting key differences between crystal- and solution-phase pathways and offering a general framework for understanding how lattice confinement shapes chemical reactivity.
Here, we present the first examples of installing a redox reporter and CO 2 reduction (CO 2 R) catalyst onto freshly HF-etched Si (photo)electrodes using a solution-phase nitrocyclocondensation (NCC) reaction. Previous studies detailed the mechanism of NCC reactions on Si under ultrahigh vacuum conditions but have not applied these chemistries to generate functional (photo)electrodes. Installing 4-nitrophenyl ferrocene (4-NpFc) molecules directly onto degenerately doped p + Si allowed us to evaluate the effects of different NCC reaction conditions on coverage (e.g., 3.6 ± 1.2 × 10 –11 mol/cm 2 ) and electrochemical reversibility. The 4-NpFc molecules remained immobilized under the reducing potentials (−2.0 V vs Fc +/0 in acetonitrile) needed to drive molecular CO 2 R catalysts. Installing 4-nitroaniline (4-NA) molecules onto low-doped pSi allowed us to couple Lehn-type Re(I) catalysts with pendant carboxylic acids. The CO Faradaic efficiency of CO production under 1-sun illumination (−2.15 V vs Fc +/0 ) was 23% in CO 2 -saturated electrolyte, a value that surpasses previous examples of CO 2 R catalyst monolayers on Si. These two examples highlight the versatility of solution-phase NCC attachment chemistries for generating functional Si (photo)electrodes.
Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .
Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .