Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution-processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Incorporating a naphthalene diimide polymer into a fullerene electron-transport layer to improve the fracture energy of perovskite solar cells

By blending a naphthalene diimide polymer into C 60 , we made a solution-processed electron-transport layer (ETL) for perovskite solar cells with fracture energies of 1.25 J m −2 , over 3× higher than that of thermally evaporated C 60 . Fracture energies were measured in a double cantilever beam configuration, and fracture surface images showed a fracture location near the ETL/perovskite interface, indicating a toughening of the interface between the ETL and Ag. We show that this modification to the ETL has no adverse effect on solar cell performance, and highlight the additional benefit of reduced parasitic absorption; a finding relevant for tandem solar cells.

electron transport layer↗
DOE OSTI2023

Inverted organic tandem solar cells with a charge recombination stack employing spatially confined p-type electrical doping

We report on the application of solution-based p-type electrical doping using 12-molybdophosphoric acid hydrate (PMA) to the fabrication of organic tandem solar cells. Such a doping approach leads to a spatially confined vertical doping profile down to a limited depth from the surface of polymer films, thus allowing the hole-collecting component of the charge recombination stack to be embedded in the photoactive layer of the bottom sub-cell. This simplifies the device architecture by removing the need for an extra dedicated hole-collecting layer. It is shown that this novel charge recombination stack comprising a PMA-doped bottom photoactive layer and a trilayer of Ag/AZO/PEIE is compatible with a solution-processed top photoactive layer. Here, the fabricated inverted organic tandem solar cells exhibit an open-circuit voltage that is close to the sum of the open-circuit voltages of the individual sub-cells, and a fill factor that is close to the better fill factor of the two sub-cells.

14 SOLAR ENERGY↗
DOE OSTI2024

NEXAFS spectroscopy of alkylated benzothienobenzothiophene thin films at the carbon and sulfur K-edges

Alkylated benzothienobenzothiophenes are an important class of organic semiconductors that exhibit high performance in solution-processed organic field-effect transistors. In this work, we study the near-edge x-ray absorption fine-structure (NEXAFS) spectra of 2,7-didecyl[1]benzothieno[3,2-b][1]benzothiophene (C 10 -BTBT) at both the carbon and sulfur K-edges. Angle-resolved experiments of thin films are performed to characterize the dichroism associated with molecular orientation. First-principles calculations using the density functional theory-based many-body x-ray absorption spectroscopy (MBXAS) method are also performed to correlate the peaks observed and their dichroism with transitions to specific antibonding molecular orbitals. Interestingly, the dichroism of the dominant, lowest energy peak is opposite at the carbon and sulfur K-edges. While the low-energy peak at the carbon K-edge is assigned to carbon 1s → π* transitions with transition dipole moment (TDM) perpendicular to the planar BTBT core, the dominant low energy peak at the sulfur K-edge is assigned to sulfur 1s → σ* transitions with TDM oriented along the long axis of the BTBT core. These differences at the sulfur and carbon K-edges are understood through the MBAXS simulations that find a reordering of the energy of the lowest energy π* and σ* transitions at the sulfur K-edge due to the strong localization of the σ* orbital over the sulfur atom. This work highlights differences in the NEXAFS spectra of organic semiconductors at carbon and sulfur K-edges and provides new insights into peak assignment and x-ray dichroism relevant for studying the molecular orientation of organic semiconductor films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Inkjet-printed SnO x as an effective electron transport layer for planar perovskite solar cells and the effect of Cu doping

Inkjet printing is a more sustainable and scalable fabrication method than spin coating for producing perovskite solar cells (PSCs). Although spin-coated SnO 2 has been intensively studied as an effective electron transport layer (ETL) for PSCs, inkjet-printed SnO 2 ETLs have not been widely reported. Here, we fabricated inkjet-printed, solution-processed SnO x ETLs for planar PSCs. A champion efficiency of 17.55% was achieved for the cell using a low-temperature processed SnO x ETL. The low-temperature SnO x exhibited an amorphous structure and outperformed high-temperature crystalline SnO 2 . The improved performance was attributed to enhanced charge extraction and transport and suppressed charge recombination at ETL/perovskite interfaces, which originated from enhanced electrical and optical properties of SnO x , improved perovskite film quality, and well-matched energy level alignment between the SnO x ETL and the perovskite layer. Furthermore, SnO x was doped with Cu. Cu doping increased surface oxygen defects and upshifted energy levels of SnO x , leading to reduced device performance. A tunable hysteresis was observed for PSCs with Cu-doped SnO x ETLs, decreasing at first and turning into inverted hysteresis afterwards with increasing Cu doping level. This tunable hysteresis was related to the interplay between charge/ion accumulation and recombination at ETL/perovskite interfaces in the case of electron extraction barriers.

14 SOLAR ENERGY↗
DOE OSTI2025

Anisotropic Thermal Transport in Quasi-2D Ruddlesden-Popper Hybrid Perovskite Superlattices

Two-dimensional hybrid metal-halide perovskites (2D-MHPs) have emerged as important solution-processed semiconductors with favorable optical and electronic properties for diverse applications in photovoltaics, optoelectronics, and spintronics. The quasi-2D layered structures, featuring large acoustic impedance mismatches between the organic and inorganic sublattices, are expected to result in distinct and anisotropic thermal transport properties along the cross-plane and in-plane directions. Here, we introduce transducer-free vibrational-pump-visible-probe (VPVP) approaches that enable accurate quantification of anisotropic thermal transport properties in various archetypical single-crystalline 2D-MHPs. Specifically, using VPVP spectroscopy and VPVP microscopy, we measure the anisotropic thermal diffusivities of 2D-MHPs with systematically varied Pb-I octahedral layer thicknesses, as well as organic spacer types and lengths, revealing how these structural parameters alter the cross-plane and in-plane thermal transport properties in distinct ways. While diffuse interface scattering plays an important role in dictating cross-plane thermal transport, in-plane thermal transport is primarily determined by phonon transport within interconnected inorganic layers. Density functional theory incorporating four-phonon scatterings provides further insight into the low thermal conductivity and modest thermal conduction anisotropy in 2D-MHPs. Our work demonstrates a new all-optical and noncontact method, which requires minimal sample preparation and allows direct visualization of cross-plane and in-plane thermal transport, potentially compatible with sample environments. The demonstrated VPVP approaches can advance understanding of thermal transport in 2D-MHPs as well as wide-ranging hybrid and polymeric semiconductors beyond 2D-MHPs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mid-infrared photodetection with 2D metal halide perovskites at ambient temperature

The detection of mid-infrared (MIR) light is technologically important for applications such as night vision, imaging, sensing, and thermal metrology. Traditional MIR photodetectors either require cryogenic cooling or have sophisticated device structures involving complex nanofabrication. Here, we conceive spectrally tunable MIR detection by using two-dimensional metal halide perovskites (2D-MHPs) as the critical building block. Leveraging the ultralow cross-plane thermal conductivity and strong temperature-dependent excitonic resonances of 2D-MHPs, we demonstrate ambient-temperature, all-optical detection of MIR light with sensitivity down to 1 nanowatt per square micrometer, using plastic substrates. Through the adoption of membrane-based structures and a photonic enhancement strategy unique to our all-optical detection modality, we further improved the sensitivity to sub–10 picowatt-per-square-micrometer levels. The detection covers the mid-wave infrared regime from 2 to 4.5 micrometers and extends to the long-wave infrared wavelength at 10.6 micrometers, with wavelength-independent sensitivity response. Our work opens a pathway to alternative types of solution-processable, long-wavelength thermal detectors for molecular sensing, environmental monitoring, and thermal imaging.

Li, Yanyan [Yale University, New Haven, CT (United↗
DOE OSTI2024

Supramolecular assembly of blue and green halide perovskites with near-unity photoluminescence

The metal-halide ionic octahedron is the optoelectronic unit for halide perovskites, and a crown ether–assisted supramolecular assembly approach can pack various ionic octahedra into tunable symmetries. In this work, we demonstrate near-unity photoluminescence quantum yield (PLQY) blue and green emission with the supramolecular assembly of hafnium (Hf) and zirconium (Zr) halide octahedral clusters. (18C6@K) 2 HfBr 6 powders showed blue emission with a near-unity PLQY (96.2%), and green emission was also achieved with (18C6@K) 2 ZrCl 4 Br 2 powders at a PLQY of 82.7%. In conclusion, these highly emissive powders feature facile low-temperature solution-based synthesis conditions and maintain high PLQY in solution-processable semiconductor inks under ambient conditions, and they were used in thin-film displays and emissive three-dimensional–printed architectures that exhibited high spatial resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2026

SolVap_StarTer (Solvent Evaporation Graphical User Interface) [SWR-26-029]

SolVap_StarTer is an open-source solvent evaporation GUI. The software combines previously published (peer-reviewed scientific journals) evaporation and crystallization physics into an easy-to-use graphical interface. The software will allow the user to specify a coating composition and drying environment, and then predict the evolution of the film as it dries. Potential applications include tracking the change in multi-solvent composition and solute concentration in solution-processed perovskites films, predicting the point of crystallization, and calculating equivalent processing parameters for transferring a process between different coating and drying methods. Github repo: https://github.com/NatLabRockies/SolVap Streamlit app: https://solvap.streamlit.app/

Starger, Jesse [National Laboratory of the Rockies↗
DOE OSTI2024

Direct electron beam patterning of electro-optically active PEDOT:PSS

The optical and electronic tunability of the conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has enabled emerging applications as diverse as bioelectronics, flexible electronics, and micro- and nano-photonics. High-resolution spatial patterning of PEDOT:PSS opens up opportunities for novel active devices in a range of fields. However, typical lithographic processes require tedious indirect patterning and dry etch processes, while solution-processing methods such as ink-jet printing have limited spatial resolution. Here, we report a method for direct write nano-patterning of commercially available PEDOT:PSS through electron-beam induced solubility modulation. The written structures are water stable and maintain the conductivity as well as electrochemical and optical properties of PEDOT:PSS, highlighting the broad utility of our method. We demonstrate the potential of our strategy by preparing prototypical nano-wire structures with feature sizes down to 250 nm, an order of magnitude finer than previously reported direct write methods, opening the possibility of writing chip-scale microelectronic and optical devices. We finally use the high-resolution writing capabilities to fabricate electrically-switchable optical diffraction gratings. We show active switching in this archetypal system with >95 % contrast at CMOS-compatible voltages of +2 V and -3 V, offering a route towards highly-miniaturized dynamic optoelectronic devices.

42 ENGINEERING↗
DOE OSTI2023

Navigating the complexities of solvent and binder selection for solution processing of sulfide solid-state electrolytes

We introduce a paradigm of solvent and binder selection for solution-processing Li 6 PS 5 Cl solid-state electrolyte particles based on Hansen solubility parameters. Treatment of the Li 6 PS 5 Cl in selected solvents results in particle morphological change, but crystallographic structure remains intact. Although solution processing reduced the Li 6 PS 5 Cl ionic conductivity, it promotes interfacial stability by alleviating reduction of the solid electrolyte in contact with Li metal. In conclusion, these findings have the potential to enhance the stability, structural integrity, and performance of sulfide solid-state electrolytes in practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Fundamental Structure/Property Studies of Gas Separation Membrane Polymers

Solution-processable polybenzimidazoles (PBIs) present opportunities for new gas separation membranes. We plan to develop systematic structure/property relations for this relatively new class of membrane materials. The fundamental questions we will address are: (1) How do chemical structure modifications of PBIs influence their gas solubility, diffusivity and permeability properties for a systematic series of gases? (2) Is the separation performance of PBIs affected by plasticization under operating conditions that are relevant to, for example, natural gas purification or olefin/paraffin separation and, if so, can this family of materials be tuned structurally to minimize deleterious effects of plasticization on separation properties? (3) What is the effect of water vapor on PBI separation performance? (4) What is the influence of physical aging on permeation properties of thin (i.e., <1 µm) PBI polymer films, and how does the rate of physical aging relate to polymer chemical structure? The primary focus of this research program is to develop a fundamental, molecular-based mechanistic understanding of the influence of chemical structure on the gas transport properties of PBIs and to establish structure/property relationships for this unique platform of materials.

08 HYDROGEN↗
DOE OSTI2024

Advanced Functional Membranes for Noble Gas Management: Fabrication and Testing of Membranes on Porous Support

We selected several porous materials including PNW-24, CC3, SAPO-34, SAPO-56 and PNW-6, as the basis for fabricating membranes for Kr/Xe separation. Initially, we synthesized powder samples of the candidates and confirmed their crystallinity and morphology with X-ray diffraction and microscopy. In the case of PNW-24 and PNW-6, we further confirmed its Xe selectivity through Xe and Kr adsorption experiments, while we relied on literature reports for CC3, SAPO-34 and SAPO-56. We subsequently proceeded to fabricate membranes on porous alumina supports using techniques such as seeded-assisted secondary growth, in-situ growth and solution-processed method. PXRD on the membranes verified that the structures were well-grown on the surface of alumina support, while SEM provided visual confirmation of particle morphology. Importantly, defects were not visually observed in the fabricated membranes, which was further verified with pressure retention tests. We analyzed the separation performance of the synthesized membranes using a dilute gas mixture comprising of xenon, krypton and argon. We focused on PNW-6 to optimize the synthesis reaction time and study the effects of time on gas separation. While more research is necessary to reach a comprehensive conclusion, in alignment with our milestones, we have successfully achieved our goals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Review on Progress, Challenges, and Prospects of Material Jetting of Copper and Tungsten

Copper (Cu) and tungsten (W) possess exceptional electrical and thermal conductivity properties, making them suitable candidates for applications such as interconnects and thermal conductivity enhancements. Solution-based additive manufacturing (SBAM) offers unique advantages, including patterning capabilities, cost-effectiveness, and scalability among the various methods for manufacturing Cu and W-based films and structures. In particular, SBAM material jetting techniques, such as inkjet printing (IJP), direct ink writing (DIW), and aerosol jet printing (AJP), present a promising approach for design freedom, low material wastes, and versatility as either stand-alone printers or integrated with powder bed-based metal additive manufacturing (MAM). Thus, this review summarizes recent advancements in solution-processed Cu and W, focusing on IJP, DIW, and AJP techniques. The discussion encompasses general aspects, current status, challenges, and recent research highlights. Furthermore, this paper addresses integrating material jetting techniques with powder bed-based MAM to fabricate functional alloys and multi-material structures. Finally, the factors influencing large-scale fabrication and potential prospects in this area are explored.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic layer deposition and its derivatives for extreme ultraviolet (EUV) photoresist applications

Solution-processed photoresists have been forerunners in semiconductor patterning for decades. Even with the drastic reduction in photolithography wavelength, traditional spin-on resists still support the fabrication of the most advanced, sub-5 nm node logic and memory devices using EUV lithography (EUVL) (λ = 13.5 nm). However, trade-off between resolution, sensitivity, and roughness in the conventional resists pose a critical challenge in the race towards device downscaling to 1 nm node. While great efforts are being made to improve spin-on EUV photoresist performance, there has been emergence of new approaches focused on developing novel resists via vapor-phase processing routes, such as atomic layer deposition (ALD) and its analogs. This review summarizes recent advances in EUVL photoresist development based on ALD and its derivative techniques, which include ALD-based inorganic–organic dry resists and hybrid resists synthesized by infiltrating conventional spin-on resists. Despite being in the early stage, initial studies have shown the great potential of ALD applications in EUVL photoresist development.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Novel Materials, Processing and Device Technologies for Space Exploration with Potential Dual-Use Applications

We highlight results of a broad spectrum of efforts on lower-temperature processing of nanomaterials, novel approaches to energy conversion, and environmentally rugged devices. Solution-processed quantum dots of copper indium chalcogenide semiconductors and multiwalled carbon nanotubes from lower-temperature spray pyrolysis are enabled by novel (precursor) chemistry. Metal-doped zinc oxide (ZnO) nanostructured components of photovoltaic cells have been grown in solution at low temperature on a conductive indium tin oxide substrate. Arrays of ZnO nanorods can be templated and decorated with various semiconductor and metallic nanoparticles. Utilizing ZnO in a more broadly defined energy conversion sense as photocatalysts, unwanted organic waste materials can potentially be repurposed. Current efforts on charge carrier dynamics in nanoscale electrode architectures used in photoelectrochemical cells for generating solar electricity and fuels are described. The objective is to develop oxide nanowire-based electrode architectures that exhibit improved charge separation, charge collection and allow for efficient light absorption. Investigation of the charge carrier transport and recombination properties of the electrodes will aid in the understanding of how nanowire architectures improve performance of electrodes for dye-sensitized solar cells. Nanomaterials can be incorporated in a number of advanced higher-performance (i.e. mass specific power) photovoltaic arrays. Advanced technologies for the deposition of 4H-silicon carbide are described. The use of novel precursors, advanced processing, and process studies, including modeling are discussed from the perspective of enhancing the performance of this promising material for enabling technologies such as solar electric propulsion. Potential impact(s) of these technologies for a variety of aerospace applications are highlighted throughout. Finally, examples are given of technologies with potential spin-offs for dual-use or terrestrial applications.

solid state devices↗
NASA NTRS2015

Novel Materials, Processing, and Device Technologies for Space Exploration with Potential Dual-Use Applications

We highlight results of a broad spectrum of efforts on lower-temperature processing of nanomaterials, novel approaches to energy conversion, and environmentally rugged devices. Solution-processed quantum dots of copper indium chalcogenide semiconductors and multi-walled carbon nanotubes from lower-temperature spray pyrolysis are enabled by novel (precursor) chemistry. Metal-doped zinc oxide (ZnO) nanostructured components of photovoltaic cells have been grown in solution at low temperature on a conductive indium tin oxide substrate. Arrays of ZnO nanorods can be templated and decorated with various semiconductor and metallic nanoparticles. Utilizing ZnO in a more broadly defined energy conversion sense as photocatalysts, unwanted organic waste materials can potentially be re-purposed. Current efforts on charge carrier dynamics in nanoscale electrode architectures used in photoelectrochemical cells for generating solar electricity and fuels are described. The objective is to develop oxide nanowire-based electrode architectures that exhibit improved charge separation, charge collection and allow for efficient light absorption. Investigation of the charge carrier transport and recombination properties of the electrodes will aid in the understanding of how nanowire architectures improve performance of electrodes for dye-sensitized solar cells. Nanomaterials can be incorporated in a number of advanced higher-performance (i.e. mass specific power) photovoltaic arrays. Advanced technologies for the deposition of 4H-silicon carbide are described. The use of novel precursors, advanced processing, and process studies, including modeling are discussed from the perspective of enhancing the performance of this promising material for enabling technologies such as solar electric propulsion. Potential impact(s) of these technologies for a variety of aerospace applications are highlighted throughout. Finally, examples are given of technologies with potential spin-offs for dual-use or terrestrial applications.

thin films↗
DOE OSTI2023

Utilizing Conjugated Imine Polymers to Stabilize Nanoparticle Silicon Anodes

Silicon anodes provide a compelling route towards delivering high-capacity lithium-ion batteries, however they are notoriously difficult to stabilize in conventional liquid electrolytes that are compatible with high performance cathodes. Furthermore, the drastic changes in volume that occur as silicon is lithiated and delithiated can lead to rapid cell failure and novel polymeric binders are known to help mitigate mechanical issues. We have recently developed a novel method to synthesize the conjugated polymer phenylmethylimine (polyPMI) using an imine metathesis reaction. We have demonstrated that this polymer can be used to stabilize silicon nanoparticles to produce a composite lithium-ion battery anode that is electrochemically stable for hundreds of lithiation and delithiation cycles with a Coulombic efficiency that is greater than 99.95% in a traditional carbonate liquid electrolyte. This work covers the structure and properties of polyPMI within the context of the unique mechanical and electrochemical requirements of nanoparticle silicon anodes. The electrochemical behavior of this polymer also offers new opportunities as an organic lithium-coordinating material that can be used to stabilize a variety of other battery electrodes. More broadly, we posit that this solution-processed, ionically conductive, and electronically conductive polymer is applicable for a variety of energy storage and conversion technologies. Finally, this work demonstrates how this novel polymer chemistry provides additional opportunities for tuning electrode architecture to target high energy full cells.

conjugated polymers↗