Search NASA⌕ Search

SEARCH · Search NASA

Results for “spatially explicit modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Willow Biomass Crops Are a Carbon Negative or Low-Carbon Feedstock Depending on Prior Land Use and Transportation Distances to End Users

Few life cycle assessments (LCAs) on willow biomass production have investigated the effects of key geographically specific parameters. This study uses a spatial LCA model for willow biomass production to determine spatially explicit greenhouse gas (GHG) emissions and energy return on investment (EROI), including land use conversion from pasture and cropland or grassland. There were negative GHG emissions on 92% of the land identified as suitable for willow biomass production, indicating this system’s potential for climate change mitigation. For willow planted on cropland or pasture, life cycle GHG emissions ranged from −53.2 to −176.9 kg CO2eq Mg-1. When willow was grown on grassland the projected decrease in soil organic carbon resulted in a slightly positive GHG balance. Changes in soil organic carbon (SOC) associated with land use change, transportation distance, and willow yield had the greatest impacts on GHG emissions. Results from the uncertainty analysis exhibited large variations in GHG emissions between counties arising from differences in these parameters. The average EROI across the entire region was 19.2. Willow biomass can be a carbon negative or low-carbon energy source with a high EROI in regions with similar infrastructure, transportation distances, and growing conditions such as soil characteristics, land cover types, and climate.

09 BIOMASS FUELS↗
NASA NTRS2016

Modeling Forest Biomass and Growth: Coupling Long-Term Inventory and Lidar Data

Combining spatially-explicit long-term forest inventory and remotely sensed information from Light Detection and Ranging (LiDAR) datasets through statistical models can be a powerful tool for predicting and mapping above-ground biomass (AGB) at a range of geographic scales. We present and examine a novel modeling approach to improve prediction of AGB and estimate AGB growth using LiDAR data. The proposed model accommodates temporal misalignment between field measurements and remotely sensed data-a problem pervasive in such settings-by including multiple time-indexed measurements at plot locations to estimate AGB growth. We pursue a Bayesian modeling framework that allows for appropriately complex parameter associations and uncertainty propagation through to prediction. Specifically, we identify a space-varying coefficients model to predict and map AGB and its associated growth simultaneously. The proposed model is assessed using LiDAR data acquired from NASA Goddard's LiDAR, Hyper-spectral & Thermal imager and field inventory data from the Penobscot Experimental Forest in Bradley, Maine. The proposed model outperformed the time-invariant counterpart models in predictive performance as indicated by a substantial reduction in root mean squared error. The proposed model adequately accounts for temporal misalignment through the estimation of forest AGB growth and accommodates residual spatial dependence. Results from this analysis suggest that future AGB models informed using remotely sensed data, such as LiDAR, may be improved by adapting traditional modeling frameworks to account for temporal misalignment and spatial dependence using random effects.

Babcock, Chad↗
NASA NTRS1993

Effects of spatial variability and scale on areal -average evapotranspiration

This paper explores the effect of spatial variability and scale on areally-averaged evapotranspiration. A spatially-distributed water and energy balance model is employed to determine the effect of explicit patterns of model parameters and atmospheric forcing on modeled areally-averaged evapotranspiration over a range of increasing spatial scales. The analysis is performed from the local scale to the catchment scale. The study area is King's Creek catchment, an 11.7 sq km watershed located on the native tallgrass prairie of Kansas. The dominant controls on the scaling behavior of catchment-average evapotranspiration are investigated by simulation, as is the existence of a threshold scale for evapotranspiration modeling, with implications for explicit versus statistical representation of important process controls. It appears that some of our findings are fairly general, and will therefore provide a framework for understanding the scaling behavior of areally-averaged evapotranspiration at the catchment and larger scales.

Famiglietti, J. S.↗
DOE OSTI2026

Forest aboveground biomass estimation through integration of sentinel-2 and PALSAR-2 time series: assessing models trained on GEDI and field inventory benchmarks

Accurate and spatially explicit forest Aboveground Biomass (AGB) mapping through remote sensing is critical for quantifying terrestrial carbon stocks and informing effective forest management strategies. However, AGB estimation in dense forests with complex terrain remains challenging due to satellite sensor signal saturation problem (saturation issue occurs in high biomass forests), structural complexity, and limited ground truth for calibration. This study presents a novel framework that integrates multi-temporal Sentinel-2 optical imagery, ALOS PALSAR-2 Synthetic Aperture Radar (SAR) data, and topographic variables with explainable Machine Learning to map AGB across mountainous forests within subtropical and temperate oceanic climate zones of Mexico. We evaluate the effects of temporal granularity and sensor synergy by comparing multiple temporal inputs and sensor configurations (Sentinel-2, PALSAR-2, and their fusion), and assess model performance using two reference datasets: NASA GEDI LiDAR-derived biomass and Mexico’s National Forest and Soil Inventory (INFyS). Our results showed that models trained on INFyS consistently outperformed those trained on GEDI, highlighting limitations in GEDI’s reliability in biomass estimates within this study region. Furthermore, the integration of Sentinel-2 and PALSAR-2 provided improved predictions compared to single-sensor models, particularly when combined with temporally explicit yearly statistics. The best-performing model, which was trained on INFyS data, and considered both Sentinel-2 and PALSAR-2 yearly statistics, as well as topographic variables, achieved an R2 of 0.64, RMSE of 51.10 Mg/ha, and relative RMSE (rRMSE) of 58.69%. Explainable ML analysis identified Sentinel-2 spectral indices and topographic features as key predictors, while PALSAR-2 metrics provided complementary information, partially mitigating saturation effects in high-biomass areas. Specifically, integrating both sensors substantially improved AGB estimation in high biomass forest (≥200 Mg/ha), yielding 98% gains over optical-only model, with resulting estimates exceeding GEDI L4B by 29% and ESA-CCI-BIOMASS by 174%. Terrain-stratified analysis indicated close agreement with GEDI in low-slope areas, with increasing divergence as slope steepness increased, while estimates remained consistently higher than ESA-CCI-BIOMASS across all slope classes. The proposed approach advances multi-sensor fusion and temporal feature engineering for AGB mapping using open-access satellite datasets, providing a scalable and reproducible framework for annual biomass monitoring in topographically complex mountainous forests. The resulting 25 m resolution biomass product has the potential to provide spatially detailed information for forest monitoring and may support applications in carbon accounting and forest management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Doubling protected land area may be inefficient at preserving the extent of undeveloped land and could cause substantial regional shifts in land use

Abstract Projection of land use and land‐cover change is highly uncertain yet drives critical estimates of carbon emissions, climate change, and food and bioenergy production. We use new, spatially explicit land availability data in conjunction with a model sensitivity analysis to estimate the effects of additional land protection on land use and land cover. The land availability data include protected land and agricultural suitability and is incorporated into the Moirai land data system for initializing the Global Change Analysis Model. Overall, decreasing land availability is relatively inefficient at preserving undeveloped land while having considerable regional land‐use impacts. Current amounts of protected area have little effect on land and crop production estimates, but including the spatial distribution of unsuitable (i.e., unavailable) land dramatically shifts bioenergy production from high northern latitudes to the rest of the world, compared with uniform availability. This highlights the importance of spatial heterogeneity in understanding and managing land change. Approximately doubling the current protected area to emulate a 30% protected area target may avoid land conversion by 2050 of less than half the newly protected extent while reducing bioenergy feedstock land by 10.4% and cropland and grazed pasture by over 3%. Regional bioenergy land may be reduced (increased) by up to 46% (36%), cropland reduced by up to 61%, pasture reduced by up to 100%, and harvested forest reduced by up to 35%. Only a few regions show notable gains in some undeveloped land types of up to 36%. Half of the regions can reach the target using only unsuitable land, which would minimize impacts on agriculture but may not meet conservation goals. Rather than focusing on an area target, a more robust approach may be to carefully select newly protected land to meet well‐defined conservation goals while minimizing impacts to agriculture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

An Improved Energy Deposition Model in MPACT and Explicit Heat Generation Coupling with CTF

The default energy deposition model in the CASL neutronics code MPACT assumes all fission energy is deposited locally in fuel rods. Furthermore, equilibrium delayed energy release is assumed for both steady-state and transient calculations. These approximations limit the accurate representation of the heat generation distribution in space and its variations over time, which are essential for power distribution and thermal-hydraulic coupling calculations. In this paper, an improved energy deposition model is presented in both the spatial and time domains. Spatially, the energy deposition through fission, neutron capture, and slowing-down reactions are explicitly modeled to account for the heat generation from all regions of a reactor core, and a gamma smearing scheme is developed that utilizes the gamma sources from neutron fission and capture. In the time domain, the delayed energy release is modeled by solving an additional equation of delayed heat emitters, similar to the equation of delayed neutron precursors.To allow the explicit heat generation coupling, the interfaces between MPACT and CTF were updated to transfer separate heat sources for different material regions (fuel, clad, moderator and guide tube). The results show that the distributions of the energy deposition between MPACT and MCNP agree very well for various 2-D assembly and quarter-core problems without TH feedback. The MPACT/CTF coupled calculation for the hot full power quarter-core case exhibited a reduced peak pin power by 2.3% and a reduced peak fuel centerline temperature by 17 K when using the explicit energy deposition and heat transfer. The new model also shows a maximum 100 pcm keff effect on assembly depletion problems and an increased overall energy release by 7% in a PWR reactivity-initiated accident (RIA) problem.

Liu, Yuxuan↗
DOE OSTI2020

Interpenetrating Plasma Simulations

This project investigated multifluid models for simulating interpenetrating plasmas. These models solve the Euler equations for each plasma stream along with an appropriate model for electron dynamics. The project developed a novel code, Euclid, that simulates these models using high-order conservative spatial discretization methods and explicit and semi-implicit time integration methods. Euclid was used to solve several multifluid test cases representative of plasma dynamics in high-energy density physics experiments. Kinetic simulations of interpenetrating flows using the LOKI code revealed novel physical effects of the ion-ion streaming instability. A new multi-flow collision operator was developed for the LOKI code. A simple model of the ion-ion streaming instability was also developed. Several presentations were given on the project results; three journal articles have been published, one has been submitted, and two are planned.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Geospatial assessment of the economic opportunity for reforestation in Maryland, USA

Afforestation and reforestation have the potential to provide effective climate mitigation through forest carbon sequestration. Strategic reforestation activities, which account for both carbon sequestration potential (CSP) and economic opportunity, can provide attractive options for policymakers who must manage competing social and environmental goals. In particular, forest carbon pricing can incentivize reforestation on private land, but this may require landholders to forego other profits. Here, we utilize an ambitious geospatial approach to quantify economic opportunities for reforestation in the state of Maryland (USA) based on high-resolution remoting sensing, ecosystem modeling, and economic analysis. Our results identify spatially-explicit areas of economic opportunity where the potential revenue from forest carbon outcompetes the expected profit of existing cropland at the hectare scale. Specifically, we find that under a baseline economic scenario of 20 dollars per ton of carbon (5% rental rate) and decadal average crop profitability, a transition to forest on agricultural land would be more profitable than 23.2% of cropland in Maryland under a 20-year land-use commitment. Accounting for variations in carbon and crop pricing, 5.5% to 55.4% of cropland would be immediately outcompeted by expected forest carbon revenue, with the potential for an additional 0.5% to 10.6% of outcompeted cropland within 20 years. Under the baseline economic scenario, an annual allocation of $5.8 million towards a carbon rental program could protect 6.93 Tg C (2.2% of the state’s total CSP) on reforested croplands. This moderate yearly cost is equal to 9.7% of Maryland’s average annual auction proceeds from participation in the Regional Greenhouse Gas Initiative (between 2014-2018), and 19.3% of the average annual subsidy payments for corn, soy, and wheat allocated over the same period. This methodological approach may be useful for state governments, not-for-profit organizations, or regional climate initiatives interested in identifying strategic areas for reforestation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2013

Representation of Nucleation Mode Microphysics in a Global Aerosol Model with Sectional Microphysics

In models, nucleation mode (1 nm<Dp <10 nm) particle microphysics can be represented explicitly with aerosol microphysical processes or can be parameterized to obtain the growth and survival of nuclei to the model's lower size boundary. This study investigates how the representation of nucleation mode microphysics impacts aerosol number predictions in the TwO-Moment Aerosol Sectional (TOMAS) aerosol microphysics model running with the GISS GCM II-prime by varying its lowest diameter boundary: 1 nm, 3 nm, and 10 nm. The model with the 1 nm boundary simulates the nucleation mode particles with fully resolved microphysical processes, while the model with the 10 nm and 3 nm boundaries uses a nucleation mode dynamics parameterization to account for the growth of nucleated particles to 10 nm and 3 nm, respectively.We also investigate the impact of the time step for aerosol microphysical processes (a 10 min versus a 1 h time step) to aerosol number predictions in the TOMAS models with explicit dynamics for the nucleation mode particles (i.e., 3 nm and 1 nm boundary). The model with the explicit microphysics (i.e., 1 nm boundary) with the 10 min time step is used as a numerical benchmark simulation to estimate biases caused by varying the lower size cutoff and the time step. Different representations of the nucleation mode have a significant effect on the formation rate of particles larger than 10 nm from nucleated particles (J10) and the burdens and lifetimes of ultrafinemode (10 nm≤Dp ≤70 nm) particles but have less impact on the burdens and lifetimes of CCN-sized particles. The models using parameterized microphysics (i.e., 10 nm and 3 nm boundaries) result in higher J10 and shorter coagulation lifetimes of ultrafine-mode particles than the model with explicit dynamics (i.e., 1 nm boundary). The spatial distributions of CN10 (Dp ≥10 nm) and CCN(0.2 %) (i.e., CCN concentrations at 0.2%supersaturation) are moderately affected, especially CN10 predictions above ∼700 hPa where nucleation contributes most strongly to CN10 concentrations. The lowermost-layer CN10 is substantially improved with the 3 nm boundary (compared to 10 nm) in most areas. The overprediction in CN10 with the 3 nm and 10 nm boundaries can be explained by the overprediction of J10 or J3 with the parameterized microphysics, possibly due to the instantaneous growth rate assumption in the survival and growth parameterization. The errors in CN10 predictions are sensitive to the choice of the lower size boundary but not to the choice of the time step applied to the microphysical processes. The spatial distribution of CCN(0.2 %) with the 3 nm boundary is almost identical to that with the 1 nm boundary, but that with the 10 nm boundary can differ more than 10-40% in some areas. We found that the deviation in the 10 nm simulations is partly due to the longer time step (i.e., 1 h time step used in the 10 nm simulations compared to 10 min time step used in the benchmark simulations), but, even with the same time step, the 10 nm cutoff showed noticeably higher errors than the 3 nm cutoff. In conclusion, we generally recommend using a lower diameter boundary of 3 nm for studies focused on aerosol indirect effects but down to 1 nm boundary for studies focused on CN10 predictions or nucleation.

microphysics↗
DOE OSTI2020

Probabilistic Groundwater Modeling of the RDX Plume at Los Alamos National Laboratory to Support Risk Assessment - 20359

A plume of the contaminant hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) with concentrations greater than the New Mexico tap water drinking standard (9.66 ppb) is present in the regional aquifer near the southwestern boundary of Los Alamos National Laboratory (LANL). A risk assessment is performed for exposure to regional aquifer groundwater, with long-term predictions of RDX concentrations provided by a calibrated, probabilistic, numerical fate and transport model. The structure of the model is hierarchical, with the RDX Regional Aquifer (RA) groundwater model acting as the primary tool for analysis of downgradient RDX concentrations. The RA model is deeply informed by the conceptual site model (CSM) and is calibrated using site RDX concentration data and hydraulic head measurements, along with other analyses. The model is calibrated using data through December 2019. Where data are scarce other lines of evidence are used to inform inputs, including the multiphase RDX Vadose Zone (VZ) model and Pipe and Disk analytical screening tool. Model inputs are described with informative prior distributions using a robust approach to development that incorporates all available lines of evidence for every parameter used as an input to the RA model. Calibration is performed using a classical nonlinear optimization routine, which is then used to initialize a Bayesian calibration. The Bayesian calibration constrains the uncertainty in the classical calibration, ultimately providing posterior distributions for all model parameters. The challenges of the calibration include high-dimensional parameter space, including spatially heterogeneous hydraulic conductivities, comparatively sparse data, and low RDX concentrations. Posterior parameter distributions developed in the calibration process are then used for stochastic predictive model runs into the future. The result of the forward runs is spatially and temporally explicit estimates of head and concentration with uncertainty at all points in space and time. The probabilistic modeling approach presented here includes innovative computational and statistical methods that leverage high-performance computing (HPC) resources. It makes use of prior modeling work performed at the chromium plume site in the central LANL area, with extensive updates. The risk assessment will ultimately be used to support decision-making at the site, using multiple appropriately weighted sources of information, as well as uncertainty, sensitivity, and value-of-information analyses. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Global spatially explicit carbon emissions from land-use change over the past six decades (1961–2020)

Land-use change (LUC) is a major source of global anthropogenic carbon emissions that contribute to climate change. However, current estimates of LUC-induced emissions vary widely with differences in data and models, making it challenging to identify and manage emissions hotspots by location and LUC activity. Here, we estimated spatially explicit carbon fluxes associated with global major gross land-use transitions based on a new bookkeeping model (i.e., LUCE). Between 1961 and 2020, LUC induced 215 and 142 Pg C of global carbon emissions and removals, respectively, resulting in average net emissions (E LUC ) of 1.21 Pg C year −1 . Latin America, Southeast Asia, and Sub-Saharan Africa dominated global E LUC with 69% of 60-year cumulative emissions, or about 86% between 2001 and 2020. Forest-related LUC activities (e.g., deforestation, reforestation) contributed largely to both regional and global carbon fluxes. Our findings shed new light on identifying LUC-induced emissions hotspots and managing land for climate mitigation and conservation.

bookkeeping model↗
NASA NTRS2020

A 3D Model to Predict Explicit Morphologies and Volume Fraction of Lack-of-Fusion Pores Generated in Selective Laser Melting Processes

The performance of an additively manufactured (AM) component is dependent on the distribution of process-induced defects in addition to the complex microstructure of the material, surface roughness of the component and the process-induced residual stresses. For instance, it has been well demonstrated that lack-of-fusion (LoF) pores produced in the selective laser melting (SLM) AM process can significantly limit the fatigue performance of the material. Although two-dimensional (2D) models exist to predict the 2D profiles of LoF pores, the 2D pore profiles cannot be directly inserted into a three-dimensional (3D) microstructure domain that is output from several prevailing process simulation packages. A few commercial packages that simulate the SLM process can predict LoF pores in a 3D domain, but the morphologies of LoF pores are voxelated and hence do not capture sharp corners of the pores, thereby obviating their use in fatigue crack initiation studies. In order to address the aforementioned gaps, a high-fidelity model that predicts not only the volume fraction, but also the explicit 3D morphologies and spatial distributions of LoF pores has been developed using a computer aided design-based environment. The model has been partially validated for Ti-6Al-4V alloy by comparing the predictions of the volume fraction of LoF pores predicted by the model with experimental data obtained from the literature. Absolute error in predicted volume fraction of LoF pores varied between 5.16% and 1.87% for energy density values between 13 J/mm3 and 45 J/mm3 where a significant amount (over 3% volume fraction) of LoF porosity was measured. The absolute error was within 1.87% for energy density values greater than 45 J/mm3.

Saikumar R. Yeratapally↗
NASA NTRS2018

The Use of Gridded Fossil Fuel CO2 Emissions (FFCO2) Inventory for Climate Mitigation Applications: Errors, Uncertainties, and Current and Future Challenges

Emission Inventory (EI) is a fundamental tool to monitor global compliance of greenhouse gases (GHGs) emissions reduction actions. Inventory guidelines provide a best practice to help EI compilers to make comparable national emission estimates, in spite of the differences in data availability across countries and regions. There are a variety of sources of errors and uncertainties, however, that originate beyond what the inventory guidelines define. For example, spatially-explicit EIs, which are a key product for atmospheric modeling applications, are often developed for research purposes, and there are no specific guidelines to disaggregate emission estimates from country scale. On top of that, EIs are fundamentally prone to systematic biases due to the simple calculation methodology and thus an objective evaluation (e.g. atmospheric top-down estimates) is needed to assure the accuracy of the estimates. ODIAC is a global high-resolution (1x1 km) fossil fuel carbon dioxide (CO2) gridded EI that is now often used in atmospheric CO2 modeling. ODIAC is based on disaggregation of national emission estimates made by CDIAC, which is the well accepted standard in the community. The ODIAC emission data product is updated on an annual basis using best available statistical data. Subnational spatial emission patterns are estimated using power plant profiles and satellite-observations of nighttime lights. In addition to the conventional CDIAC gridded data product, ODIAC carries international bunker emissions (shipping and aviation), which allows flux inversion modelers to accurately impose the global total fossil fuel emissions and their horizontal and vertical distribution. We have extensively evaluated ODIAC emissions using fine-grained EIs as well as a high-resolution atmospheric model simulation across different scales (national, subnational/regional, and urban policy relevant) with a focus on the uncertainties associated with the emission disaggregation. We have examined the use of NASA's Black Marble Suomi-NPP/VIIRS nightlight data.

Oda, Tomohiro↗
DOE OSTI2026

Movement Models to Predict Low‐Altitude Flight of Soaring Birds Using Look‐Ahead Environmental Factors

Advances in fine-scale movement modeling of soaring birds can aid efforts to understand and resolve the impacts of anthropogenic activities on such birds. Soaring birds often rely on underlying terrain and low-altitude updrafts to govern their flights at rotor-swept altitudes (≤ 200 m above ground level), which puts them at risk of collision with wind turbines. We developed a data-driven Markov model at 1-s resolution that predicts the fine-scale flight behavior of golden eagles (Aquila chrysaetos) as a function of ecological covariates at the current location as well as those within an eagle's line of sight. We only considered ecological covariates that are readily available in real-time (ground elevation and wind conditions). Latent factors (age, sex, species, behavioral intent, migratory status) were intentionally left out of the model. We calibrated the model using golden eagle telemetry data collected in two different ecoregions of the United States. Given a starting location, the calibrated model simulates multiple stochastic 3D paths to produce a time-explicit and spatially explicit risk map of turbine collisions. We discovered an empirical relation between the rate of change of heading and the orographic updraft conditions within an eagle's line of sight. Our model performed most effectively when predicting predominantly-soaring flights at rotor-swept altitudes during wind conditions in which turbines are likely to be operational. The calibrated model could be used in concert with automated eagle detection and turbine curtailment technologies. Specifically, once an eagle is detected by those systems, our model could then provide accurate predictions of turbines the eagle is likely to interact with in the near term.

17 WIND ENERGY↗
DOE OSTI2023

Global impacts of vegetation clumping on regulating land surface heat fluxes

The clumping index (CI) quantifies the non-random distribution of vegetation across space, which regulates the canopy radiative transfer processes and land surface carbon, water, and energy cycles. However, its impact on global surface energy budget, particularly sensible heat fluxes and surface temperature, is not well understood. Additionally, while there have been studies showing significant seasonal variations in CI, the impacts of these variations on surface energy fluxes remain unclear. In this study, we incorporated satellite-derived spatially and temporally explicit CI data into the Community Land Model version 5 (CLM5) to evaluate the effects of CI on global land energy fluxes. Our results showed that including CI increased the global mean sensible heat flux dissipated from ground by 3.9 W m -2 (~18%), while decreasing the global mean vegetation sensible heat flux by 4.9 W m -2 (~65%), resulting in a total sensible heat decrease of 1.0 W m -2 (~3%). In contrast, CI increased the global mean latent heat flux by 0.8 W m -2 (~2%), primarily due to increased evapotranspiration (up to 11 W m -2 ) in tropical regions. We also found considerable impacts of seasonal variations in CI, particularly on sensible heat fluxes from ground and vegetation in evergreen needleleaf forests and deciduous needleleaf forests. Using constant CI rather than considering seasonal variations resulted in significant overestimation and underestimation of the sensible heat fluxes from vegetation and ground, respectively, in boreal summer. In conclusion, these changes in surface energy fluxes caused by CI and its seasonal variations led to up to 1.7 and 0.5 K differences in simulated mean ground temperature. These findings highlight the importance of including CI and considering its seasonal variations in modeling land surface energy fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Using Behavioral Science to Target LMI and High-Value Solar Installations (Final Technical Report)

This project is a data-driven analysis of approaches to facilitate solar adoption in LMI communities and areas with high potential benefits to the electric grid. The cornerstone of the project was two waves of randomized field experiments. The first wave involved novel approaches to reaching LMI communities based on insights from literature. The second wave involved areas of high potential of solar to the electricity grid, as determined in collaboration with the local utilities in Connecticut. Both waves were followed by surveys to develop insight into the effectiveness of different approaches. A third key element of the project is the development of new agent-based models of solar energy diffusion that explicitly incorporate the real spatial and temporal constraints that influence solar diffusion, based on real-world data on solar adoption. The project also involved outreach and dissemination of key findings to relevant stakeholders, including a guidebook on strategies to accelerate solar deployment to low and moderate income communities, multiple academic publications, and numerous presentations of the research findings.

14 SOLAR ENERGY↗
NASA NTRS1991

Nonlinear influence of mesoscale land use on weather and climate

It is shown that the influence of mesoscale landscape spatial variability on the atmosphere must be parameterized or explicitly modeled in larger-scale atmospheric model simulations including general circulation models. The mesoscale fluxes of heat that result from this variability are shown to be of the same order of magnitude but with a different vertical structure than found for the turbulent fluxes. These conclusions are based on experiments in which no phase changes of water were permitted. To parameterize surface thermal inhomogeneities, the influence of landscape must be evaluated using spectral analysis or an equivalent procedure. To include the nonlinear contribution of each scale, numerical model simulations for the range of observed surface and overlying atmospheric conditions must be performed.

Pielke, R. A.↗
NASA NTRS2024

Quantifying Food Security and Mitigation Risks Consequential to Climate Change Impacts on Crop Yields

Climate change is expected to impact crop yields globally, with some regions benefiting from favorable conditions and CO2 fertilization, while others face adverse effects from altered precipitation and higher temperatures. Changes in crop yields can destabilize the global food system and pose challenges to food security. Moreover, crop production is crucial, as biofuels are becoming increasingly important contributors to climate change mitigation measures aimed at limiting global warming. This study uses the Integrated Model to Assess the Global Environment integrated assessment model framework to analyze different indicators related to food security and climate change mitigation under varying climate change impacts on crop yields. Twelve spatially explicit crop productivity projections were taken from the full archive of the Global Gridded Crop Model Intercomparison of 120 climate-crop model combinations, forced by CMIP6-based climate scenarios. The selection includes two average-performing climate-crop model combinations, two pessimistic combinations that perform one standard deviation below the mean, and two optimistic model combinations that perform one standard deviation above the mean. To single out the effect of climate change on productivity changes, we drew samples from two representative concentration pathways (RCP2.6 and RCP8.5). These productivity projections were applied within an otherwise uniform scenario (SSP2) and analyzed for their effect on total calorie demand, crop prices, and number of people at risk of undernourishment to quantify food security. Risks to climate change mitigation targets were explored by modeling the total bioenergy supply, emissions, and global mean temperature. The results revealed significant differences in the risk of food security and mitigation potential between different regions and climate change scenarios. Across scenarios, the crop area extent can vary up to 2 million km2 due to changing crop yields. The projected change in global hunger ranges from 60 to 160 million undernourished people, indicating uncertainty between climate and crop model combinations. Low-income regions are especially impacted because of their high sensitivity to changes in food prices. Global climate change mitigation ambitions can also deviate by the latter part of the 21st century, as changes in yields will impact biofuel production as well as agriculture, forestry and other land use emissions. The quantitative insights generated by this study highlight the need for global policy efforts to make the agricultural system more adaptive to climate change to handle potential negative impacts.

crop yields↗