Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Temporal Properties of Compressible Magnetohydrodynamic Turbulence

Describing the temporal properties of compressible magnetohydrodynamic (MHD) turbulence is a fundamental problem that has important implications for particle acceleration and transport in astrophysical plasmas. Here, by carefully analyzing the spatial and temporal properties of compressible MHD turbulence, we derive a new spectral power density function that is supported by simulations. This new function reveals that the low-frequency fluctuations are dominated by modes with small parallel wavenumbers with respect to the mean background magnetic field. Furthermore, for fluctuations with dynamically significant parallel wavenumbers, broadening around their eigenfrequencies is described by this function, which is in close agreement with simulations. We use this formalism to present the scaling properties of individual MHD modes. Such broadening is a direct consequence of nonlinear processes and is different for the three fundamental MHD modes. Our results provide a new window to investigate the temporal properties of turbulence and will enable further studies on the interaction between compressible MHD turbulence and energetic plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Flavor diagonal nucleon charges using clover fermions on MILC HISQ ensembles

We present lattice results for the flavor diagonal charges of the proton from the analysis of eight ensembles generated using 2+1+1-flavors of highly improved staggered quarks by the MILC Collaboration. The calculation includes all the needed connected and disconnected contributions to nucleon three-point function. For extracting matrix elements using fits to the spectral decomposition of these correlation functions, two strategies to remove excited state contributions are employed and compared. To renormalize these charges, the 2+1-flavor mixing matrix is calculated in the regularization independent symmetric momentum subtraction intermediate scheme on the lattice. The final results are presented in the $\overline{MS}$ scheme at scale 2 GeV. The axial charges for the proton are $𝑔$$^{𝑢}_{𝐴}$ = 0.781⁢(25), $𝑔$$^{𝑑}_{𝐴}$ =−0.440⁢(39), and $𝑔$$^{𝑠}_{𝐴}$ = −0.055⁢(9); the tensor charges are $𝑔$$^{𝑢}_{𝑇}$ = 0.782⁢(28), $𝑔$$^{𝑑}_{𝑇}$ = −0.195⁢(16), and $𝑔$$^{𝑠}_{𝑇}$ = −0.0016⁢(12); and the scalar charges are $𝑔$$^{𝑢}_{𝑆}$ = 9.39⁢(88), $𝑔$$^{𝑑}_{𝑆}$ = 8.84⁢(93), and $𝑔$$^{𝑠}_{𝑆}$ = 0.37⁢(14). Results for the neutron are given by the 𝑢 ↔ 𝑑 interchange. Results for the sigma terms are 𝜎 𝜋⁢𝑁 | standard = 42⁢(6) MeV from a “standard” analysis and 𝜎 𝜋⁢𝑁 | 𝑁⁢𝜋 = 61⁢(6) MeV from an “𝑁⁢𝜋” analysis that includes the contributions of multihadron 𝑁⁢𝜋 excited states as motivated by chiral perturbation theory. Our preferred value 𝜎 𝜋⁢𝑁 | 𝑁⁢𝜋 is consistent with the phenomenological extraction from 𝜋 −𝑁 scattering data. The strangeness content of the proton, for which the standard analysis is appropriate, is 𝜎 𝑠 | standard = 35⁢(13) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Accessing Transient Isomers in the Photoreaction of Metastable‐State Photoacid

The photoreaction of a metastable‐state photoacid (mPAH) generally involves multiple isomers with various connected pathways of photoinduced structural changes during a single reaction cycle. However, only a limited number of isomers have been identified experimentally so far owing to the inherent complexity in combination with the presence of various competing electronic and vibrational processes, as well as the constantly varying interactions between mPAH isomers and solvent molecules. Here, in this work, an optical spectroscopic study on a benzimidazole‐based mPAH, a novel photoacid using benzimidazole as the structural moiety with the active proton, is reported. Through measurements of linear absorption and steady‐state fluorescence in neat solvents and binary mixtures, a pronounced effect of neat water and its binary mixture with glycerol is discovered on the photoreaction of this benzimidazole‐mPAH, manifested by the remarkably distinct spectral responses to irradiation from that observed for an organic solution under identical conditions. Measurements of time‐ and frequency‐resolved fluorescence emission further enable to access transient isomers and the associated spectral characteristics from other competing electronic excited‐state relaxation processes. Spectral deconvolution analysis and time‐dependent density functional theory calculations are applied to separate distinct spectral components and access their potential origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Coherency-Constrained Spectral Clustering for Power Network Reduction

This paper presents a methodology for reducing the complexity of large-scale power network models using spectral clustering, aggregation of electrical components, and cost function approximation. Two approaches are explored using unconstrained and constrained spectral clustering to determine areas for effective system reduction. Once the system areas are determined, both loads and generators by type are aggregated, and their new cost function is approximated through polynomial curve-fitting or statistical methods. The performance of reduced networks is evaluated in terms of their ability to follow the true daily cost of the original system over a 24-hour period considering a set of several days. Two test systems are taken as test beds. Application of the methodology to a modified version of the IEEE 39-bus system reduces it from 17 generators to a 4-bus system and 9 generators with about 93% of accuracy. Similarly, the IEEE 118-bus system is reduced from 19 generators to a 3-bus system with three aggregated units achieving over 99% of accuracy. These findings address scalability challenges and enhance accuracy for high and mid-loading level conditions, and by aggregating thermal units with similar cost functions.

42 ENGINEERING↗
DOE OSTI2024

Accurate numerical simulations of open quantum systems using spectral tensor trains

Decoherence between qubits is a major bottleneck in quantum computations. Decoherence results from intrinsic quantum and thermal fluctuations as well as noise in the external fields that perform the measurement and preparation processes. With prescribed colored noise spectra for intrinsic and extrinsic noise, we present a numerical method, Quantum Accelerated Stochastic Propagator Evaluation (Q-ASPEN), to solve the time-dependent noise-averaged reduced density matrix in the presence of intrinsic and extrinsic noise. Q-ASPEN is arbitrarily accurate and can be applied to provide estimates for the resources needed to error-correct quantum computations. We employ spectral tensor trains, which combine the advantages of tensor networks and pseudospectral methods, as a variational ansatz to the quantum relaxation problem and optimize the ansatz using methods typically used to train neural networks. Here, the spectral tensor trains in Q-ASPEN make accurate calculations with tens of quantum levels feasible. We present benchmarks for Q-ASPEN on the spin-boson model in the presence of intrinsic noise and on a quantum chain of up to 32 sites in the presence of extrinsic noise. In our benchmark, the memory cost of Q-ASPEN scales as a low-order polynomial in the size of the system once the number of system states surpasses the number of basis functions used in the spectral expansion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Quantifying Temperature Dependence of Pu(IV) Absorbance Spectra for Advanced Online Monitoring of Nuclear Processes

This article presents a systematic study of Pu(IV) absorbance spectral features as a function of temperature to develop an understanding of this parameter’s effect on chemometric models that can be used as online monitoring tools to support nuclear processing. The descriptive and predictive models that provide real-time feedback of these processes are usually constructed with data collected in conditions typical of a laboratory environment, which can differ drastically from a processing environment. To assess the impact of temperature on Pu(IV) absorbance spectra, 11 samples of Pu(IV) were synthesized with varying HNO 3 concentrations ranging from 0.6 to 9.5 M and heated between 15 and 45 °C. Ultraviolet (UV)–visible (vis)–near-infrared (NIR) absorption spectra collected at different HNO 3 concentrations and temperatures revealed that features associated with Pu(IV) are sensitive to temperature at all HNO 3 concentrations and that changes in features depend on HNO 3 concentration. The contributions of temperature and HNO 3 concentration to variation in Pu(IV) spectral features were evaluated using the principal component analysis of spectra that were baseline-corrected with an asymmetric least-squares method. Furthermore, predictive modeling for HNO 3 concentration with partial least-squares regression of UV–vis–NIR spectra highlighted the importance of accounting for temperature in the calibration set to optimize model performance. This methodology constitutes a new, systematic approach to account for the effect of temperature on the absorption spectra of metal ions and is useful for process monitoring applications in many industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mechanistic insights into low-temperature oxidation of carbon fibers: Influence of hydrogen defects and crystallite size

Although oxidation mechanisms have been exhaustively studied for graphite, similar analyses of carbon fibers are comparatively sparse. Most prior work has focused on quantifying weight loss or assessing protective surface coatings designed to slow oxidation. The use of optical spectroscopic techniques for oxidation analyses is comparatively unexplored, but such techniques could provide an early indicator of fiber oxidation that would undermine carbon fiber performance. Here, in this work, we applied Raman spectroscopy to study oxidation-induced spectral alterations in 16 carbon fiber types from 7 manufacturers oxidized at 300 °C for 72 h, 400 °C for 8 h, and 500 °C for 1 h. We connect these results with structural properties of the carbon fibers obtained through wide-angle X-ray scattering, identifying a linear dependence between the reactivity of carbon fibers and the crystallite size of the unperturbed fibers. We then demonstrate that substituted hydrogen defects are likely removed from the fiber surface during oxidation and use the relative defect concentration to predict the Raman spectral change as a function of temperature and time, assuming Arrhenius behavior.

Carbon fiber↗
DOE OSTI2025

Near-Infrared Emission from Sulfur Heteroatom Defects in Single-Walled Carbon Nanotubes

Quantum defects introduced into single-walled carbon nanotubes (SWCNTs) that support near-infrared emission are promising candidates for many applications. Here, we present a type of quantum defect in which sulfur atoms are incorporated into the crystal lattice of SWCNTs through their reactions with a mild reducing agent, sodium dithionite. When radical anions generated by sodium dithionites react with (6,5)-SWCNTs, two new emission features emerge at 1120 and 1250 nm. Comparing these spectral features with density functional theory calculation results, we attribute them to defects with episulfide or thioether structures. Here, by investigating the influences of reaction conditions including reactant concentration, light irradiation, and solvent type, we identify the reaction mechanism between SWCNTs and sodium dithionite and achieve good control over defect densities. Due to the intrinsic reactivity of sulfur species, the sulfur-containing quantum defects discovered here may facilitate the introduction of more complex and functionally diverse moieties into SWCNTs.

Anions↗
DOE OSTI2025

Novel application of neutrinos to evaluate U.S. nuclear weapons performance

There is a growing realization that neutrinos can be used as a diagnostic tool to better understand the inner workings of a nuclear weapon. Robust estimates demonstrate that an Inverse Beta Decay (IBD) neutrino scintillation detector built at the Nevada Test Site with a 1000-ton active target mass at a standoff distance of 500 m would detect thousands of antineutrino events per nuclear test. This would provide less than 4% statistical error on the measured antineutrino rate and 5% error on antineutrino energy. Extrapolating this to an error on the test device explosive yield requires knowledge from evaluated nuclear databases, non-equilibrium fission rates, and assumptions on internal neutron fluxes. Initial calculations demonstrate that the total number of neutrinos emitted per fission in the first 10 3 s after a short pulse of 239 Pu fission is about a factor of two less than that from Pu fissioning under steady state conditions. Furthermore, there are significant energy spectral differences as a function of time after the pulse that must be considered. These and other model dependencies will be discussed in the paper. In the absence of nuclear weapons testing, many of the technical and theoretical challenges of a full nuclear test could be mitigated with a low cost smaller scale 20 ton fiducial mass IBD demonstration detector placed near a pulsed reactor. Potential reactors include the Texas A&M University TRIGA 1 GW–10 ms pulsed facility or the Sandia Annular Core Research Reactor. The short duty cycle and repeatability of pulses would provide critical real environment testing and measurements, which would be valuable for planning a possible real test shot in the future. Furthermore, the antineutrino rate as a function of time data would provide unique constraints on fission databases and model assumptions. Finally, there are impactful science drivers such as sensitive searches for ∼1 eV 2 sterile neutrinos and ∼MeV scale axions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Spectrometer-free quantitative vapor sensing and classification via spatiotemporal imaging of porous silicon metasurfaces

Metasurfaces offer a compact platform for optical vapor sensing, but their practical deployment has been limited by weak evanescent light–matter interactions and reliance on spectrally resolved instrumentation. Here, we report porous silicon (pSi) metasurfaces for spectrometer-free quantitative detection of volatile organic compounds (VOCs) with strongly enhanced light–matter interaction. The engineered porosity increases sensitivity by >100× relative to non-porous dielectric metasurfaces, enabling limits of detection of 1.65 ppm for methanol and 9.1 ppm for ethanol across a broad dynamic range (<10 ppm to >103 ppm). Imaging-based readout provides a lightweight, spectrometer-free pathway for real-time quantitative sensing. Beyond quantitative detection, the mesoporous architecture introduces adsorption–desorption kinetics as an additional information channel. Analysis of the resulting spatiotemporal signatures enables kinetic fingerprinting without reliance on infrared spectral features or surface functionalization, and a lightweight machine-learning classifier differentiates acetone, methanol, ethanol, and isopropanol with 91.6% accuracy. These results establish porous metasurfaces as spatiotemporal sensing elements that couple quantitative vapor detection with kinetic fingerprinting through real-time dynamical responses, enabling low-cost, high-performance optical sensors.

Dash, Tomoshree [Clemson University]↗
DOE OSTI2025

Mechanisms and Energetics of CO 2 Chemisorption in Choline-Based Eutectic Solvents

Understanding the influences of proton sharing and hydrogen transfer in amine and hydroxyl functionalized eutectic solvents is important for tuning CO 2 binding as they relate to the chemisorption capacity and energetics of solvent regeneration in carbon capture. In this study, we examine how the CO 2 binding mechanism and energetics vary in eutectic solvents composed of choline-based hydrogen-bond acceptors (HBAs) with amine and hydroxyl moieties and ethylene glycol (EG), propylene glycol (PG), 1,2-butanediol (BD), and monoethanolamine (MEA)-type hydrogen-bond donors (HBDs), through absorption–desorption experiments and spectral analysis, supported with density functional theory (DFT) calculations. While the HBD-CO 2 complex is the major and the thermodynamically more favored product of absorption in all of the examined eutectic solvents, this complexation is only possible proceeding a proton transfer from HBD to the HBA in diol-based systems (EG, PG, BD). The interplay between HBA-CO 2 and HBD-CO 2 speciation is governed by the HBD concentration, basicity, and steric effects, with increased HBD-CO 2 interactions in the presence of smaller HBDs (size: BD > PG > EG). On the other hand, in MEA-based systems, CO 2 readily binds to the amine followed by a proton transfer from the amine to the HBA as confirmed by DFT calculations. In this way, the MEA-CO 2 chemisorption capacities exceeded that of the conventional amine (up to 0.93 mol of CO 2 per mol of MEA versus 0.5). Furthermore, the increase in CO 2 capacities and enhanced binding in eutectics including MEA or the more basic HBAs also resulted in regeneration temperatures of 70 to 60 °C with calculated reaction energies of −82 to −57 kJ/mol, compared to 50 °C for others with weaker binding, following CO 2 absorption at 25 °C.

absorption↗
DOE OSTI2025

Exact spectral gaps of random one-dimensional quantum circuits

The spectral gap of local random quantum circuits is a fundamental property that determines how close the moments of the circuit's unitaries match those of a Haar random distribution. When studying spectral gaps, it is common to bound these quantities using tools from statistical mechanics or via quantum information-based inequalities. Here, by focusing on the second moment of one-dimensional unitary circuits where nearest-neighboring gates act on sets of qudits (with open and closed boundary conditions), we show that one can exactly compute the associated spectral gaps. Indeed, having access to their functional form allows us to prove several important results, such as the fact that the spectral gap for closed boundary condition is exactly the square of the gap for open boundaries, as well as improve on previously known bounds for approximate design convergence. Finally, we verify our theoretical results by numerically computing the spectral gap for systems of up to 70 qubits, as well as comparing them to gaps of random orthogonal and symplectic circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

The brighter-fatter effect in the JWST MIRI Si:As IBC detectors: I. Observations, impact on science, and modeling

Context.The Mid-Infrared Instrument (MIRI) on board theJames WebbSpace Telescope (JWST) uses three Si:As impurity band conduction (IBC) detector arrays. The output voltage level of each MIRI detector pixel is digitally recorded by sampling up the ramp. For uniform or low-contrast illumination, the pixel ramps become nonlinear in a predictable way, but in areas of high contrast, the nonlinearity curve becomes much more complex. The origin of the effect is poorly understood and currently not calibrated out of the data. Aims.We provide observational evidence of the brighter-fatter effect (BFE) in MIRI conventional and high-contrast coronagraphic imaging, low-resolution spectroscopy, and medium-resolution spectroscopy data, and we investigate the physical mechanism that gives rise to the effect on the MIRI detector pixel raw voltage integration ramps. Methods.We used public data from the JWST/MIRI commissioning and Cycle 1 phase. We also developed a numerical electrostatic model of the MIRI detectors using a modified version of the publicPoisson_CCDcode. Results.We find that the physical mechanism behind the BFE manifesting in MIRI data is fundamentally different to that of charge-coupled devices and photodiode arrays such as the Hawaii-XRG near-infrared detectors used by the NIRISS, NIRCam, and NIRSpec instruments on board JWST. Observationally, the BFE makes the JWST MIRI data yield 10–25% larger point sources and spectral line profiles as a function of the relative level of de-biasing of neighboring detector pixels. This broadening impacts the MIRI absolute flux calibration, time-series observations of faint companions, and point spread function modeling and subtraction. We also find that the intra-pixel 2D profile of the shrinking Si:As IBC detector depletion region directly impacts the accuracy of the pixel ramp nonlinearity calibration model.

Astronomy & Astrophysics↗
DOE OSTI2025

Antiprotons and Elementary Particles over a Solar Cycle: Results from the Alpha Magnetic Spectrometer

We present results over an 11-year Solar cycle of cosmic antiprotons based on 1.1 × 10 6 events in the rigidity range from 1.00 to 41.9 GV. The $\bar{𝑝}$ fluxes exhibit distinct properties. The magnitude of the $\bar{𝑝}$ flux temporal variation is significantly smaller than those of 𝑝, 𝑒 − , and 𝑒 + . A hysteresis between the $\bar{𝑝}$ fluxes and the 𝑝 fluxes is observed, whereas the $\bar{𝑝}$ and 𝑒 − fluxes show a linear correlation. With a model-independent analysis, we found a universal relation between the shape of the rigidity spectrum and the magnitude of flux temporal variation over an 11-year Solar cycle for both positively and negatively charged particles. The simultaneous results on $\bar{𝑝}$ and 𝑝, 𝑒 − , and 𝑒 + provide unique information for understanding particle transport in the Solar System as a function of mass, charge, and spectral shape.

cosmic ray composition & spectra↗
DOE OSTI2026

Shakeup and shakeoff spectra in the electron capture decay of atomic 7 Be

The most stringent laboratory-based experimental limits on the existence of submegaelectronvolt sterile neutrinos are currently set by decay spectroscopy of radioactive 7 Be embedded into superconducting sensors. The systematic uncertainties are dominated by the modeling of the electron shakeup and shakeoff spectra that are not based on state-of-the-art atomic theory and do not include electron correlations or relativistic effects. We have used the multiconfiguration Dirac-Fock formalism to obtain correlated wave functions ab initio and compute all single and double shake processes in the electron capture decay of atomic 7 Be . The simulations can explain some but not all of the observed spectral features, likely because the wave functions are modified by the Ta sensor material that the 7 Be is embedded into. The new models also show that the 𝐿/𝐾 electron capture ratio of 7 Be in Ta has previously been slightly underestimated revising the previous value of 0.070(7) to a new value of 0.0756(20).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Multiconfigurational Electronic Structure of Nickel Cross-Coupling Catalysts Revealed by X-ray Absorption Spectroscopy

Ni II 2,2'-bipyridine complexes are commonly invoked intermediates in metallaphotoredox cross-coupling reactions. Despite their ubiquity, design principles targeting improved catalytic performance remain underdetermined. A series of Ni( R bpy)( R 'Ar)Cl (R = MeOOC, t-Bu, R' = CH 3 , CF 3 ) complexes were proposed to have multiconfigurational electronic structures on the basis of multiconfigurational/multireference calculations, with significant mixing of Ni → bpy metal-to-ligand charge transfer (MLCT) configurations into the ground-state wave function. Here, Ni K-edge and L 2,3 -edge X-ray absorption spectroscopies provide experimental support for the highly covalent and multiconfigurational electronic structures of these complexes. The pre-edge intensity in the K-edge spectrum reflects highly covalent Ni–aryl bonding. The L 3 -edge spectral shape is dependent on ligand functionalization, and a feature reflecting the MLCT character is assigned using prior ab initio and new semiempirical calculations. The results suggest the push/pull effects of the aryl/bpy ligands moderate the changes in electron density on Ni during the multiredox cross-coupling reaction cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Bayesian Framework for Spectral Reprojection

Abstract Fourier partial sum approximations yield exponential accuracy for smooth and periodic functions, but produce the infamous Gibbs phenomenon for non-periodic ones. Spectral reprojection resolves the Gibbs phenomenon by projecting the Fourier partial sum onto a Gibbs complementary basis, often prescribed as the Gegenbauer polynomials. Noise in the Fourier data and the Runge phenomenon both degrade the quality of the Gegenbauer reconstruction solution, however. Motivated by its theoretical convergence properties, this paper proposes a new Bayesian framework for spectral reprojection, which allows a greater understanding of the impact of noise on the reprojection method from a statistical point of view. We are also able to improve the robustness with respect to the Gegenbauer polynomials parameters. Finally, the framework provides a mechanism to quantify the uncertainty of the solution estimate.

Li, Tongtong (ORCID:0000000276644764)↗