Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral shape parameter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Spectral characteristics of earth-space paths at 2 and 30 FHz

Spectral characteristics of 2 and 30 GHz signals received from the Applications Technology Satellite-6 (ATS-6) are analyzed in detail at elevation angles ranging from 0 deg to 44 deg. The spectra of the received signals are characterized by slopes and break frequencies. Statistics of these parameters are presented as probability density functions. Dependence of the spectral characteristics on elevation angle is investigated. The 2 and 30 GHz spectral shapes are contrasted through the use of scatter diagrams. The results are compared with those predicted from turbulence theory. The average spectral slopes are in close agreement with theory, although the departure from the average value at any given elevation angle is quite large.

Baxter, R. A.↗

Herman-Wallis factors in the C2H2nu5 infrared fundamental near 14 microns

The presence of acetylene has been confirmed for some time in the atmospheres of the outer planets Jupiter, Saturn, Neptune, and Saturn's satellite Titan. For these atmospheres, the determination of C2H2 abundances using its strong nu5 fundamental requires laboratory line position and intensity measurements. The 1-m Fourier transform spectrometer at McMath solar telescope of Kitt Peak National Observatory was used to measure C2H2 at an unapodized spectral resolution of 0.0025/cm. Synthetic spectra are generated by convolving a Voigt line shape with an instrument function and varying intensity parameters by means of a nonlinear least squares technique. Intensities of 37 nu5 lines spanning P18 through R20 were measured using 0.123 torr of gas in a 1-cm cell. A Herman-Wallis intensity correction parameter of 1.3(4) x 10 to the -3rd has been derived using a least squares linear fit.

Maguire, William C.↗

High Spectral Resolution MODIS Algorithms for Ocean Chlorophyll in Case II Waters

The Case 2 chlorophyll a algorithm is based on a semi-analytical, bio-optical model of remote sensing reflectance, R(sub rs)(lambda), where R(sub rs)(lambda) is defined as the water-leaving radiance, L(sub w)(lambda), divided by the downwelling irradiance just above the sea surface, E(sub d)(lambda,0(+)). The R(sub rs)(lambda) model (Section 3) has two free variables, the absorption coefficient due to phytoplankton at 675 nm, a(sub phi)(675), and the absorption coefficient due to colored dissolved organic matter (CDOM) or gelbstoff at 400 nm, a(sub g)(400). The R(rs) model has several parameters that are fixed or can be specified based on the region and season of the MODIS scene. These control the spectral shapes of the optical constituents of the model. R(sub rs)(lambda(sub i)) values from the MODIS data processing system are placed into the model, the model is inverted, and a(sub phi)(675), a(sub g)(400) (MOD24), and chlorophyll a (MOD21, Chlor_a_3) are computed. Algorithm development is initially focused on tropical, subtropical, and summer temperate environments, and the model is parameterized in Section 4 for three different bio-optical domains: (1) high ratios of photoprotective pigments to chlorophyll and low self-shading, which for brevity, we designate as 'unpackaged'; (2) low ratios and high self-shading, which we designate as 'packaged'; and (3) a transitional or global-average type. These domains can be identified from space by comparing sea-surface temperature to nitrogen-depletion temperatures for each domain (Section 5). Algorithm errors of more than 45% are reduced to errors of less than 30% with this approach, with the greatest effect occurring at the eastern and polar boundaries of the basins. Section 6 provides an expansion of bio-optical domains into high-latitude waters. The 'fully packaged' pigment domain is introduced in this section along with a revised strategy for implementing these variable packaging domains. Chlor_a_3 values derived semi-analytically and Chlor_a_2 values derived empirically using the O Reilly et al. OC3M algorithm from MODIS Terra radiances are compared to field chlorophyll-a concentrations in Sections 7 and 8.

Carder, Kendall L.↗

Laboratory absorption strengths and line shape parameters in the 4-0, 5-0, and 6-0 vibration bands of HD

Experimental values for the visible vibration-dipole bands of HD are improved through a study of weak, unsaturated absorption lines of HD against a well-defined white light continuum at low gas densities between 0.3 and 1.7 amagats. Spectral resolution was high enough to allow recovery of line profiles with only minor corrections for instrumental effects, so line strengths and shapes are determined directly without recourse to theoretical assumptions regarding the curve of growth, and the unusual phenomenon of collision narrowing in HD is directly observed in the line shape for the first time. Accurate line strengths are reported, the behavior of spectral profiles as a function of gas density is discussed, and the pressure shift coefficients are determined. These are compared with previous laboratory work done either at lower spectral resolving power or at higher gas densities.

Trauger, J. T.↗

Bayesian optimization of laser wakefield acceleration via spectral pulse shaping

In this paper, we investigate the effect of spectral pulse shaping of the laser driver on the performance of channel-guided, laser–plasma accelerators. The study was carried out with the assistance of Bayesian optimization using particle-in-cell simulations. We used a realistic plasma profile based on a novel optical-field-ionized channel technique with ionization injection and low, on-axis plasma densities to maximize the energy gain of the electron bunch trailing the laser. Spectral shaping allows us to modify the temporal profile of the laser driver while keeping the laser energy constant, affecting the acceleration and injection processes. In addition, we consider how modifying the plasma channel parameters may affect the target outputs. Given the complexity and breadth of the parameter space in question, we used numerical optimization to identify high-performing configurations. In particular, we found laser profiles with additional spectral content that, when used with optimal plasma channel parameters, result in charge content an order of magnitude higher than the baseline Gaussian case while also increasing the mean energy of the electron bunch.

Physics - Plasma physics↗

Coupled Retrieval of Aerosol Properties and Surface Reflection Using the Airborne Multi-Angle SpectroPolarimetric Imager (AirMSPI)

The Airborne Multi-angle SpectroPolarimetric Imager (AirMSPI) has been flying aboard the NASA ER-2 high altitude aircraft since October 2010. In step-and-stare operation mode, AirMSPI acquires radiance and polarization data at 355, 380, 445, 470*, 555, 660*, 865*, and 935 nm (* denotes polarimetric bands). The imaged area covers about 10 km by 10 km and is observed from 9 view angles between ±67° off of nadir. We have developed an efficient and flexible code that uses the information content of AirMSPI data for a coupled retrieval of aerosol properties and surface reflection. The retrieval was built based on the multi-pixel optimization concept, with the use of a hybrid radiative transfer model that combines the Markov Chain and adding/doubling methods. The convergence and robustness of our algorithm is ensured by applying constraints on (a) the spectral variation of the Bidirectional Polarization Distribution Function (BPDF) and angular shape of the Bidirectional Reflectance Distribution Function (BRDF); (b) the spectral variation of aerosol optical properties; and (c) the spatial variation of aerosol parameters across neighboring image pixels. Our retrieval approach has been tested using over 20 AirMSPI datasets having low to moderately high aerosol loadings (~0.02<AOD550-nm<~0.45) and acquired during several field campaigns. Results are compared with AERONET aerosol reference data. We also explore the benefits of AirMSPI’s ultraviolet and polarimetric bands as well as the use of multiple view angles.

Xu, Feng↗

On-Orbit Cross Calibration Between the Osiris-Rex Orbiting Laser Altimeter and Navigation Camera

Accurate shape models of small bodies provide both science value and resources for precision relative navigation. One instrument commonly used for generating shape models is the laser altimeter. Laser altimeters require accurate intrinsic and extrinsic calibration knowledge to produce accurate shape models. Here, we describe a method used for updating the intrinsic and extrinsic calibration parameters of the laser altimeter onboard the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft, OLA (OSIRISREx Laser Altimeter). We perform the calibration update by comparing the OLA scans with monocular camera images of the asteroid surface captured by the primary navigation camera.

Andrew J. Liounis↗

Quantitative Study of Plasmonic Gold Nanostar Geometry Toward Optimal SERS Detection

Abstract Complex shapes of gold nanostars (GNS) have been the major obstacle to the comprehensive understanding of the rich plasmonic phenomena of GNS. We conducted extensive, systematic numerical study of far-field and near-field spectral responses of GNS for varying geometrical parameters (e.g., number of spikes, spike tip angle, and spike-to-core ratio) to elucidate the relationship between the optical property and the geometry of GNS. We found that symmetric configurations of GNS spikes generated both dipole and quadrupole localized surface plasmon (LSP) modes, their hybridization resulted in the final near-field intensity at the spike tips, and there existed a specific GNS geometry that optimized the hybridization and thus the E-field intensity for any given wavelength. From these results, we further identified the shapes of GNS that generated the strongest Surface Enhanced Raman Scattering (SERS) enhancement factors in the visible and NIR spectral range. Hence, our results provide guiding principles in determining the optimal geometry of GNS for SERS applications with any choice of excitation wavelength.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Shaping dark photon spectral distortions

The cosmic microwave background (CMB) spectrum is an extraordinary tool for exploring physics beyond the Standard Model. The exquisite precision of its measurement makes it particularly sensitive to small effects caused by hidden sector interactions. In particular, CMB spectral distortions can unveil the existence of dark photons which are kinetically coupled to the standard photon. In this work, we use the COBE-FIRAS dataset to derive accurate and robust limits on photon-to-dark-photon oscillations for a large range of dark photon masses, from 10$^{−10}$ to 10$^{−4}$ eV. We consider in detail the redshift dependence of the bounds, computing CMB distortions due to photon injection/removal using a Green’s function method. Our treatment improves on previous results, which had set limits studying energy injection/removal into baryons rather than photon injection/removal, or ignoring the redshift evolution of distortions. The difference between our treatment and previous ones is particularly noticeable in the predicted spectral shape of the distortions, a smoking gun signature for photon-to-dark-photon oscillations. The characterization of the spectral shape is crucial for future CMB missions, which could improve the present sensitivity by orders of magnitude, exploring regions of the dark photon parameter space that are otherwise difficult to access [inline-graphic not available: see fulltext].

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Overview of the SCEC/USGS Community Stress Drop Validation Study Using the 2019 Ridgecrest Earthquake Sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress-drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude-spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress-drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two-week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. Here, in this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite-fault modeling, ground-motion-based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between-method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress-drop values.

58 GEOSCIENCES↗

GRB 011121: A Collimated Outflow into Wind-Blown Surroundings

We report optical and near-infrared follow-up observations of GRB 011121 collected predominantly at ESO telescopes in Chile. We discover a break in the afterglow light curve after 1.3 days, which implies an initial jet opening angle of about 9 deg. The jet origin of this break is supported by the fact that the spectral energy distribution is achromatic during the first four days. During later phases, GRB 011121 shows significant excess emission above the flux predicted by a power law, which we interpret as additional light from an underlying supernova. In particular, the spectral energy distribution of the optical transient approximately 2 weeks after the burst is clearly not of power-law type, but can be presented by a black body with a temperature of approx. 6000 K. The deduced parameters for the decay slope as well as the spectral index favor a wind scenario, i.e. an outflow into a circum-burst environment shaped by the stellar wind of a massive GRB progenitor. Due to its low redshift of z=0.36, GRB 011121 has been the best example for the GRB-supernova connection until GRB 030329, and provides compelling evidence for a circum-burster wind region expected to exist if the progenitor was a massive star.

Greiner, J.↗

Solar active region physical parameters inferred from a thermal cyclotron line and soft X-ray spectral lines

Simultaneous high-resolution observations of coronal loops were made at the 20-cm wavelength with the VLA and at soft X-ray wavelengths with the SMM FCS. The images obtained at both wavelengths have nearly identical sizes and ellipsoidal shapes, with the emission stretching between and across regions of opposite magnetic polarity in the underlying photosphere. The results indicate that the radiation at 20 cm and soft X-ray wavelengths originates from the same region, and that 20 cm maps can image X-ray coronal loops. The X-ray spectral lines were used to obtain values of electron temperature, T(e), of about 2.6 x 10 to the 6th K and electron density, N(e), of about 3.1 x 10 to the 9th/cu cm. These parameters were used to show that the layers emitting 20-cm radiation can be optically thick to either thermal bremsstrahlung or thermal gyroresonance radiation, depending upon unknown but plausible values of loop thickness, magnetic scale height, and magnetic field strength.

Lang, Kenneth R.↗

An analysis of the shapes of ultraviolet extinction curves. III - An atlas of ultraviolet extinction curves

The basic data needed to produce UV extinction curves for a sample of 78 stars, including spectral types, visual photometry, parameters used to produce fits to the UV extinction curves, distances to the program stars, and line-of-sight H I column densities, are presented. The observational and numerical techniques used to obtain the results are discussed in detail. The UV extinction curves and their analytic fits are shown graphically.

Fitzpatrick, Edward L.↗

BATSE observations of gamma-ray burst spectra. I - Spectral diversity

We studied the time-averaged gamma-ray burst spectra accumulated by the spectroscopy detectors of the Burst and Transient Source Experiment. The spectra are described well at low energy by a power-law continuum with an exponential cutoff and by a steeper power law at high energy. However, the spectral parameters vary from burst to burst with no universal values. The break in the spectrum ranges from below 100 keV to more than 1 MeV, but peaks below 200 keV with only a small fraction of the spectra breaking above 400 keV; it is therefore unlikely that a majority of the burst spectra are shaped directly by pair processes, unless bursts originate from a broad redshift range. The correlations among burst parameters do not fulfill the predictions of the cosmological models of burst origin. No correlations with burst morphology or the spatial distribution were found. We demonstrate the importance of using a complete spectral description even if a partial description (e.g., a model without a high-energy tail) is statistically satisfactory.

Band, D.↗

Absolute Radiometric Calibration of Narrow-Swath Imaging Sensors with Reference to Non-Coincident Wide-Swath Sensors

An inter-calibration method is developed to provide absolute radiometric calibration of narrow-swath imaging sensors with reference to non-coincident wide-swath sensors. The method predicts at-sensor radiance using non-coincident imagery from the reference sensor and knowledge of spectral reflectance of the test site. The imagery of the reference sensor is restricted to acquisitions that provide similar view and solar illumination geometry to reduce uncertainties due to directional reflectance effects. Spectral reflectance of the test site is found with a simple iterative radiative transfer method using radiance values of a well-understood wide-swath sensor and spectral shape information based on historical ground-based measurements. At-sensor radiance is calculated for the narrow-swath sensor using this spectral reflectance and atmospheric parameters that are also based on historical in situ measurements. Results of the inter-calibration method show agreement on the 2 5 percent level in most spectral regions with the vicarious calibration technique relying on coincident ground-based measurements referred to as the reflectance-based approach. While the variability of the inter-calibration method based on non-coincident image pairs is significantly larger, results are consistent with techniques relying on in situ measurements. The method is also insensitive to spectral differences between the sensors by transferring to surface spectral reflectance prior to prediction of at-sensor radiance. The utility of this inter-calibration method is made clear by its flexibility to utilize image pairings with acquisition dates differing in excess of 30 days allowing frequent absolute calibration comparisons between wide- and narrow-swath sensors.

McCorkel, Joel↗

Multi-Angle Polarimetry: The Once and Future King of Aerosol Remote Sensing

Although aerosols (and their interactions with clouds) are widely known to be one of the most uncertain components of the climate, they remain largely unconstrained in climate simulations. This is because global observations of all the parameters relevant to such simulations - quantity, size, shape, optical properties and chemical composition - are very difficult to simultaneously retrieve from existing remote sensing instruments. The problem can be addressed by maximizing the scene information gathered by a remote sensing instrument, by the use of (passive) multi-spectral, multi-angle and polarimetrically sensitive sensors. These observations, coupled with a radiative transfer model, can be inverted to solve for aerosol parameters. However, the choices to be made when designing an such an observing system and retrieval algorithm are complex, and a variety of approaches have been undertaken by the scientific community. I will review the various multi-spectral, multi-angle, polarimetric observation systems employed for aerosol remote sensing and their corresponding retrieval algorithms. This includes the French Polarization and Directionality of Earth Reflectance (POLDER) instrument, which has been the only such instrument successfully deployed in orbit thus far (most recently from 2004-2013), the NASA Aerosol Polarimetry Sensor (APS) on the ill-fated NASA Glory Mission (launch failure in 2011), potential or planned polarimeters on the NASA Aerosol-Cloud-Ecosystem (ACE) and Pre-Aerosol, Clouds and ocean Ecosystems (PACE) missions, and airborne prototypes from around the world.

Knobelspiesse, Kirk↗

A Low-Memory Spectral-Correlation Analyzer for Digital QAM-SRRC Waveforms

Cyclostationary signal processing (CSP) provides the ability to estimate received waveforms' statistical features blindly. Quadrature amplitude modulated (QAM) waveforms, when filtered by the square-root-raised cosine (SRRC) pulse shape function, have cyclic features that CSP can exploit to detect waveform parameters such as symbol rate (SR) and center frequency (CF). The estimation of these SR-CF pairs enables a cognitive radio (CR) to perform spectrum sensing techniques such as spectrum sharing and interference mitigation. Here, we investigate a field-programmable gate array (FPGA) application of a blind symbol rate-center frequency estimator. First, this study provides a background on the theory behind the cyclic spectral density function (CSD), spectral correlation analyzers (SCA), and spectrum sensing. Following this is a discussion on the motivation for CubeSat spectrum sensing. An SCA implementation for low-memory devices, such as FPGA-based CubeSat, is then describes. The paper concludes by reporting the performance characteristics of the newly developed streaming-based SCA.

FPGA↗

Global Sensitivity Analysis of Simulated Remote Sensing Polarimetric Observations Over Snow

This study presents a detailed theoretical assessment of the information content of passive polarimetric observations over snow scenes, using a global sensitivity analysis (GSA) method. Conventional sensitivity studies focus on varying a single parameter while keeping all other parameters fixed. In contrast, the GSA correctly addresses the covariance of state parameters across their entire parameter space, hence favoring a more correct interpretation of inversion algorithms and the optimal design of their state vectors. The forward simulations exploit a vector radiative transfer model to obtain the Stokes vector emerging at the top of the atmosphere for different solar zenith angles, when the bottom boundary consists of a vertically resolved snowpack of non-spherical grains. The presence of light-absorbing particulates (LAPs), either embedded in the snow or aloft in the atmosphere above in the form of aerosols, is also considered. The results are presented for a set of wavelengths spanning the visible (VIS), near-infrared (NIR), and shortwave infrared (SWIR) region of the spectrum. The GSA correctly captures the expected, high sensitivity of the reflectance to LAPs in the VIS–NIR and to grain size at different depths in the snowpack in the NIR–SWIR. With adequate viewing geometries, mono-angle measurements of total reflectance in the VIS–SWIR (akin to those of the Moderate Resolution Imaging Spectroradiometer, MODIS) resolve grain size in the top layer of the snowpack sufficiently well. The addition of multi-angle polarimetric observations in the VIS–NIR provides information on grain shape and microscale roughness. The simultaneous sensitivity in the VIS–NIR to both aerosols and snow-embedded impurities can be disentangled by extending the spectral range to the SWIR, which contains information on aerosol optical depth while remaining essentially unaffected when the same particulates are mixed with the snow. Multi-angle polarimetric observations can therefore (i) effectively partition LAPs between the atmosphere and the surface, which represents a notorious challenge for snow remote sensing based on measurements of total reflectance only and (ii) lead to better estimates of grain shape and roughness and, in turn, the asymmetry parameter, which is critical for the determination of albedo. The retrieval uncertainties are minimized when the degree of linear polarization is used in place of the polarized reflectance. The Sobol indices, which are the main metric for the GSA, were used to select the state parameters in retrievals performed on data simulated for multiple instrument configurations. Improvements in retrieval quality with the addition of measurements of polarization, multi-angle views, and different spectral channels reflect the information content, identified by the Sobol indices, relative to each configuration. The results encourage the development of new remote sensing algorithms that fully leverage multi-angle and polarimetric capabilities of modern remote sensors. They can also aid flight planning activities, since the optimal exploitation of the information content of multi-angle measurements depends on the viewing geometry. The better characterization of surface and atmospheric parameters in snow-covered regions advances research opportunities for scientists of the cryosphere and ultimately benefits albedo estimates in climate models.

remote sensing↗